Balance work of construction of 01 No. 120 men Barrack For SHQ (Barrack-I) BSF, at Baramulla, Kashmir (UT of JK).

Name of Work: Balance work of construction of 01 Nos 120 men Barrack For SHQ (Barrack-I) BSF, at Baramulla, Kashmir (J&K)

ITEM NO Description of Items Unit Qty. Rate Amount

Head Civil Work DSR-2023 Items

Sub- Sub-Head : Earth Work

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding

2.6 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth,

lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge.

2.6.1 All kinds of soil Cum 750.00 177.50 133125.00

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or

drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms,

lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed,

within a lead of 50 m.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of

sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the

soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by

ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :

2.10.1 All kinds of soil

2.10.1.1 Pipes, cables etc, not exceeding 80 mm dia. Metre 300.00 215.60 64680.00

2.10.1.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Metre 77.38 352.15 27250.07

Extra for excavating trenches for pipes, cables etc. in all kinds of soils for depth exceeding 1.5m, but not

2.11 exceeding 3m.(Rate is over corresponding basic item for depth upto 1.5 metre). (127% of corresponding Item Metre 2.00 273.81 547.62

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not

2.25 exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift Cum 413.11 196.00 80969.56

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and

disposal of rubbish, lead up to 50 m and lift upto1.5 m.

2.28.1 All kinds of soil. Sqm 899.00 34.15 30700.85

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30

2.31 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the Sqm 899.00 17.60 15822.40

periphery of the area cleared.

Sub Total (A) DSR Items 679175.51

PAGE-1 of 26 Digitally signed by Om Prakash

ITEM NO Description of Items Unit Qty. Rate Amount

Sub-Head : Concrete Work

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural

sources : 4 graded stone agg

Providing and laying in position cement concrete of specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

4.1.8 1:4:8 (1 Cement : 4 coarse sand(zone-III) : 8 graded stone aggregate 40 mm nominal size). Cum 161.00 6812.00 1096732.00

4.3 Centering and shuttering including strutting, propping etc. and removal of form work for :

4.3.1 Foundations, footings, bases for columns. Sqm 317.00 392.15 124311.55

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse

4.10 sand(Zone III) : 4 graded stone aggregate 12.5mm nominal size). Sqm 11.00 410.85 4519.35

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per

4.12 per manufacturer’s specification. 50kg 15.00 18.15 272.25

Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg

4.13 per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth Sqm 11.00 146.15 1607.65

lightly soaked in kerosene oil.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone

aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and

consolidated and grouted with fine sand, including necessary excavation leveling and dressing and finishing the

Total (B) DSR Items

Sub- Sub-Head : Reinforced Cement Concrete

5.9 Centering and shuttering including strutting, propping etc. and removal of form for :

5.9.1 Foundations, footings, bases of columns, etc. for mass concrete Sqm 50.45 392.15 19783.97

5.9.2 Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. Sqm 1300.00 842.50 1095250.00

5.9.3 Suspended floors, roofs, landings, balconies and access platform Sqm 146.64 927.25 135971.94

5.9.4 Shelves (Cast in situ) Sqm 79.91 927.25 74096.55

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers Sqm 20.00 736.40 14728.00

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 50.00 961.30 48065.00

5.9.7 Stairs, (excluding landings) except spiral-staircases Sqm 2.00 764.95 1529.90

Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands,

copings, bed plates, anchor blocks and the like

5.9.16 Edges of slabs and breaks in floors and walls

5.9.19 Weather shade, Chajjas, corbels etc., including edges Sqm 5.00 951.10 4755.50

5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 15000.00 107.85 1617750.00

PAGE-2 of 26 Digitally signed by Om Prakash

ITEM NO Description of Items Unit Qty. Rate Amount

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete

for reinforced cement concrete work, using cement content as per approved design mix, including pumping of

concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including

admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve

workability without impairing strength and durability as per direction of Engineer-in-charge.

(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix

is payable/recoverable separately).

5.33.1 All works upto plinth level Cum 70.00 9504.75 665332.50

5.33.2 All works above plinth level upto floor V level Cum 70.00 9655.70 675899.00

5.35 Add for using extra cement in the items of design mix over and above the specified cement content therein. Quintal 96.00 733.50 70416.00

Sub Total (C) DSR Items 4441270.91

Sub-Head : Masonry Work

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 120.00 7132.25 855870.00

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above

plinth level up to floor V level in all shapes and sizes in :

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 20.00 9105.95 182119.00

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 14.00 1123.80 15733.20

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick

masonry.ird course of half brick masonry.

Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of

class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand).

Sub Total (D) DSR Items 1062323.40

PAGE-3 of 26 Digitally signed by Om Prakash

ITEM NO Description of Items Unit Qty. Rate Amount

Sub- Sub-Head : Cladding Work

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for

kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade,

8.2 colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated

with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and

polishing to edges to give high gloss finish etc. complete at all levels.

8.2.1 Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble

8.2.1.1 Area of slab upto 0.50 sqm Sqm 1.00 3414.80 3414.80

8.2.1.2 Area of slab over 0.50 sqm Sqm 1.00 3078.40 3078.40

8.2.2 Granite of any colour and shade

8.2.2.1 Area of slab upto 0.50 sqm Sqm 2.00 5413.50 10827.00

8.2.2.2 Area of slab over 0.50 sqm Sqm 11.00 5136.30 56499.30

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to

edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

8.3.2 Granite work Metre 150.00 510.95 76642.50

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto

150 mm with epoxy resin based adhesive, including cleaning etc. complete.

Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity

8.5 counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. Each 32.00 978.70 31318.40

including moulding, rubbing and polishing of cut edges etc. complete

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by

the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as

8.31 approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar Sqm 733.00 1267.95 929407.35

1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in

white cement mixed with pigment of matching shade complete.

Total (E) DSR Items 1182131.05

Sub-Head : Wood and P.V.C. Work

Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching

Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle

board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior

grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with

polyurethane primer (fittings to be paid separately).

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core

9.21 of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering

with vertical grains or cross bands and face veneers on both faces of shutters:

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Sqm 119.00 2392.65 284725.35

25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary

PAGE-4 of 26 Digitally signed by Om Prakash

ITEM NO Description of Items Unit Qty. Rate Amount

9.47 Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :

9.47.2 25 mm dia (heavy type) Metre 200.00 186.40 37280.00

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc.

Providing and fixing ISI marked 85x42 mm oxidised M.S. pull bolt lock conforming to IS : 7534 with necessary

screws bolts, nut and washers etc. complete.

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc.

9.74 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever

handles of approved quality with necessary screws etc. complete.

9.81 Providing and fixing bright finished brass handles with screws etc. complete:

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than

9.101 grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc.

9.101.2 Twin rubber stopper Each 20.00 72.35 1447.00

Sub Total (F) DSR Items 788574.65

Sub- Sub-Head : Steel Work

Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in

position and applying a priming coat of approved steel primer all complete

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting,

hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre

hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel

sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing

of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings,

complete all as per approved design, (sectional weight of only steel members shall be measured for payment).

Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1

Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

PAGE-5 of 26 Digitally signed by Om Prakash

ITEM NO Description of Items Unit Qty. Rate Amount

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild

steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of

mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed

together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-

plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the

surface as directed by Engineer-in-charge:

10.14.2 Profile C

10.14.2.1 Fixing with adjustable lugs with split end tail to each jamb. Metre 281.60 611.75 172268.80

10.14.2.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). Metre 5.00 598.85 2994.25

10.14.3 Profile E

10.14.3.1 Fixing with adjustable lugs with split end tail to each jamb. Metre 20.00 640.20 12804.00

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140

mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid

shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at

the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a

priming coat of approved steel primer using structural steel etc. as required.

10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. Kg 4000.00 172.60 690400.00

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15 x 3mm and

nuts & bolts complete.

10.29.1 Galvanised M.S. Wire gauze with 0.63mm dia wire and 1.4 mm aperture on both sides. Sqm 120.00 844.70 101364.00

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all

complete with :

10.30.1 4.0 mm thick glass panes. Sqm 61.00 1064.65 64943.65

Sub Total (G) DSR Items 2040912.65

:H Sub-Head : Flooring

11.13 Providing and fixing glass strips in joints of terrazzo/ cement concrete floors.

11.13.1 40 mm wide and 4 mm thick. Metre 10.00 91.75 917.50

Marble stone flooring with 18mm thick marble stone as per sample of marble shall be approved by Engineer-in-

11.23 charge over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with

grey cement slurry including rubbing and polishing complete with :

11.24 Extra for pre finished nosing to treads of steps of marble stone. Metre 100.00 719.9 71990.00

11.25 Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 metre . Sqm 45.00 851.8 38331.00

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed

11.26 with pigment to match the shade of the slab including rubbing and polishing complete with base of cement

mortar 1 : 4 (1 cement : 4 coarse sand) :

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement

11.27 mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the Sqm 150.00 2354.7 353205.00

shade of the slabs, including rubbing and polishing complete.

PAGE-6 of 26 Digitally signed by Om Prakash

ITEM NO Description of Items Unit Qty. Rate Amount

Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the

manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey,

11.37 Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey Sqm 350.00 1096.55 383792.50

cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with

water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades,

laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @

3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer) with water

absorption less than 0.08 % and conforming to I.S. 15622, of approved make in all colours & shade in skirting,

11.46 riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement

slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.

Sub Total (H) DSR Items 3905910.50

PAGE-7 of 26 Digitally signed by Om Prakash

ITEM NO Description of Items Unit Qty. Rate Amount

Sub- Sub-Head : Roofing

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special

sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive)

as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37

mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long

12.45 with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with

nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm

running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of

80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,

shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64

mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm

high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of

rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum

board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm

c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with

recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto

150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification

and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of

perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in

Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS

certification marks)

Sub Total (I) DSR Items 649428.20

Sub- Sub-Head : Finishing

13.1 12 mm cement plaster of mix :

13.2 15 mm cement plaster on the rough side of single or half brick wall of mix :

13.16 6 mm cement plaster of mix :

Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m

or part thereof.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface

even and smooth complete.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of

approved manufacturer, of required shade and colour complete, as per manufacturer's specification.

13.41.1 Two or more coats on new work. Sqm 5884.00 185.65 1092364.60

13.44 Finishing walls with water proofing cement paint of required shade:

13.44.1 New work (two or more coats applied @ 3.84Kg/10Sqm) Sqm 5884.00 116.9 687839.60

13.46 Finishing walls with Acrylic Smooth exterior paint of required shade :

PAGE-8 of 26 Digitally signed by Om Prakash

ITEM NO Description of Items Unit Qty. Rate Amount

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer

applied @ 2.20 kg/10 sqm).

13.50 Applying priming coat :

13.50.2 With ready mixed alminium primer of approved brand and manufacture on resinous wood and plywood Sqm 317.00 74.65 23664.05

13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and

Total (J) DSR Items 4612645.55

Sub-Head : Road Work

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating

earth to an average of 22.5 cm. depth, dressing to camber and consolidating with road roller including making

good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.

Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of

the maximum dry density (proctor density).

16.3 Supplying and stacking at site.

16.3.1 90 mm to 45 mm size stone aggregate. Cum 40.00 2098.4 83936.00

16.3.2 63 mm to 45 mm size stone aggregate. Cum 40.00 1636.05 65442.00

16.3.6 Stone screening 13.2 mm nominal size (Type A). Cum 2.00 2034.35 4068.70

16.3.7 Stone screening 11.2 mm nominal size (Type B). Cum 2.00 2247.75 4495.50

Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness,

hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and

camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse

aggregate, watering and compacting to the required density

Providing and applying tack coat using hot straight run bitumen of grade VG - 10 including heating the bitumen,

16.30 spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the

existing road surface as per specifications :

PAGE-9 of 26 Digitally signed by Om Prakash

ITEM NO Description of Items Unit Qty. Rate Amount

2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone chippings of 13.2mm and 11.2mm size

respectively per 100 sqm. and 52 kg. and 56 kg. of hot bitumen per cum of stone chippings of 13.2 mm and

11.2mm size respectively including a tack coat with hot straight run bitumen including consolidation with road

roller of 6 to 9 tonne capacity etc. complete.(tack coat to be paid for separately) :

With paving Asphalt grade VG - 10 heated and then mixed with solvent at the rate of 70 grams per kg of

Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and retained on 180 micron sieve)

with bitumen using 128 kg of bitumen of grade VG - 10 bitumen per cum of fine aggregate and 0.60 cum of fine

aggregate per 100 sqm of road surface including rolling and finishing with road roller all complete.

Painting road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking

16.48 paint conforming to IS : 164, on bituminous surface in white/yellow shade including cleaning the surface of all

dirt, scales, oil, grease and foreign material etc. complete.

16.48.1 New work (Two or more coats). Sqm 100.00 288.9 28890.00

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made

by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required

colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand

etc. all complete as per the direction of Engineer-in-charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position

to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including

making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm),

16.69 including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge Cum 10.00 10117.6 101176.00

(length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by

Engineer-in-charge).

Total (K) DSR Items 1022100.40

Sub- Sub-Head : Water Proofing

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C.,

kitchen and the like consisting of:

(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS

2645 in recommended proportions including rounding off junction of vertical and horizontal surface.

(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound

in recommended proportion including rounding off junction of vertical and horizontal surface.

(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.

(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and

pasted to each other with bitumen @ 1.7 kg/sqm).

Total (L) DSR Items 197017.60

PAGE-10 of 26 Digitally signed by Om Prakash

ITEM NO Description of Items Unit Qty. Rate Amount

Non-Schedule Item

Sub-Head : Water Proofing

Providing & Laying cement concrete using broken brick/brickbats 25 mm to100 mm size with 50% of cement

NS-1 mortar 1:5 ( 1cement : 5 coarse sand )admixed with proprietary water proofing compound conforming to is Cum 163.63 6224.30 1018457.43

:2645 in sunken and like complete.

Storage to be formed of 19mm commercial board at the back with fixed shelves made of 19mm thick

commercial board with all exposed edges finished with 2mm thick PVC edge band (factory finished) as per

details & architect approval. Shutters of cabinet to be formed of 19mm thick commercial board finished with

1mm thk laminate on outer surfaces and enamel painted whitefrom inside as er specifications.. Rear backing of

cabinet to be formed with 12mm commercial plywood complete in all respect including 100mm high laminate

finished skirting as per approval/details.The cupboard shall have 2 nos drawer running on 12mm drawer

channelof best quality of approved makes. one drawer shall be lockable. the brass lcok shall be used for the

same. the drawer shall have 100mm Long SS handles fixed by cutting a chase in the front of the drawer.

NS-2 Storage to be complete with hardware installed as per the appoved model/make & as directed to consist of the sqm 252.00 11352.00 2860704.00

following: Each Shutter to have 3 nos of automatic spring loaded hinge of approved make installed strictly a per

manufacturers guidelines with requisite tools/jigs. Each set of shutters to be provided with 1no. multi purpose

lock as specified, SS handles size 600mm long as per approval, auto bolt, etc. (as per approved make) Basic

price of Laminate @ Rs.550/ Sqmt (front area to be measured from bottom i/c height of leg/skirting to top of

cabinet). the depth of cupborad shall be 600mm depth including the thickness of the backing ply.Hardware: All

hardware shall be as per the appoved model/make all complete.

Total (L) Non-Schedule Items 3879161.43

Head Plumbing- DSR 2023 Items

L Sub-Head : Sanitary Installations

Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap,

10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle

17.1 lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the

walls andfloors wherever required:

17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Each 23.00 6767.4 155650.20

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre

low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend,

17.3 overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design

complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever

17.3.1 W.C. pan with ISI marked white solid plastic seat and lid Each 3.00 8006.6 24019.80

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350

mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P.

17.4 brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting

and making good the walls and floors wherever required :

17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 15.00 6258.75 93881.25

PAGE-11 of 26 Digitally signed by Om Prakash

ITEM NO Description of Items Unit Qty. Rate Amount

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of

17.7 standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever

17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps Each 31.00 2648.85 82114.35

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and

17.10 stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls

wherever required :

17.10.1 Kitchen sink with drain board

17.10.2 Kitchen sink without drain board

17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

17.28.2 Flexible pipe

17.70 Providing and fixing PTMT Bottle Trap for Wash basin and sink.

Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the

17.70.1 centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms Each 32.00 367.1 11747.20

Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the

17.70.2 centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms Each 10.00 375.65 3756.50

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of

17.71 standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing Each 32.00 168.35 5387.20

not less than 105 gms.

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not

less than 190 gms.

Total (M) DSR Items 417612.10

SUBHEAD-I(B): SANITARY INSTALLATIONS (NON-SCHEDULED ITEMS)

Providing and Fixing 15mm C.P brass mixing fitting for kitchen sink with swinging spout complete. Including

cutting and making good the walls wherever required .

C.P. brass mixing fitting Each 4.00 3488.56 13954.23

Total (N) Non-Schedule Items 13954.23

PAGE-12 of 26 Digitally signed by Om Prakash

ITEM NO Description of Items Unit Qty. Rate Amount

SUBHEAD-II(B) : SOIL, WASTE & VENT PIPES(NON -SCHEDULE ITEMS)

Providing and fixing UPVC pipes type-B confirming to IS: 13592 for soil waste and vent pipes on wall face/floor

NSP-2 Supreme/equivalent make including jointing with seal ring with solvent cement/glue jointing etc. 75 mm DN. Metre 150.00 467.86 70178.68

Providing and fixing UPVC pipes type-B confirming to IS: 13592 for soil waste and vent pipes on wall face/floor

NSP-3 Supreme/equivalent make including jointing with seal ring with solvent cement/glue jointing etc. 110 mm DN. Metre 120.00 636.72 76406.26

Providing and fixing on wall face/floor moulded/accessories for unplasticised Rigid PVC water pipes

NSP-4 Supreme/equivalent make conforming to IS : 14735 Type B, including jointing with seal ring solvent Each 25.00 182.84 4570.89

cement/glue jointing, 75 mm Coupler

Providing and fixing on wall face/floor moulded/accessories for unplasticised PVC water pipes

NSP-5 Supreme/equivalent make conforming to IS : 14735 Type B, including jointing with seal ring solvent Each 28.00 239.81 6714.58

cement/glue jointing, 110 mm Coupler

Providing and fixing on wall face/floor moulded/accessories for unplasticised PVC water pipes

NSP-6 Supreme/equivalent make conforming to IS : 14735 Type B, including jointing with seal ring solvent Each 45.00 246.94 11112.49

cement/glue jointing, 75x75x75 mm Plain T.

Providing and fixing on wall face/floor moulded/accessories for unplasticised PVC water pipes

NSP-7 Supreme/equivalent make conforming to IS : 14735 Type B, including jointing with seal ring solvent Each 25.00 421.02 10525.41

cement/glue jointing, 110x110x110 mm Plain T.

Providing and fixing on wall face/floor moulded/accessories for unplasticised PVC water pipes

NSP-8 Supreme/equivalent make conforming to IS : 14735 Type B, including jointing with seal ring solvent Each 12.00 276.14 3313.73

cement/glue jointing, 75x75x75 mm T with door.

Providing and fixing on wall face/floor moulded/accessories for unplasticised PVC water pipes

NSP-9 Supreme/equivalent make conforming to IS : 14735 Type B, including jointing with seal ring solvent Each 4.00 421.02 1684.07

cement/glue jointing, 110x110x110 mm T with door.

Providing and fixing on wall face/floor moulded/accessories for unplasticised PVC water pipes

NSP-10 Supreme/equivalent make conforming to IS : 14735 Type B, including jointing with seal ring solvent Each 25.00 158.67 3966.64

cement/glue jointing, 75 mm Bend 87.5 degree

Providing and fixing on wall face/floor moulded/accessories for unplasticised PVC water pipes

NSP-11 Supreme/equivalent make conforming to IS : 14735 Type B, including jointing with seal ring solvent Each 8.00 235.56 1884.46

cement/glue jointing, 110 mm Bend 87.5 degree

Providing and fixing on wall face/floor moulded/accessories for unplasticised PVC water pipes

NSP-12 Supreme/equivalent make conforming to IS : 14735 Type B, including jointing with seal ring solvent Each 25.00 408.01 10200.16

cement/glue jointing, 110 mm dia P trap

Providing and fixing Upvc floor drain of following size inlet and outlet including cutting and making good the

NSP-13 walls and floors wherever required complete in all respect, 110x63 mm outlet IS : 14735 Type B, including Each 60.00 234.22 14052.92

jointing with seal ring solvent cement/glue jointing

Total (O) Non Schedule Items 214610.29

Sub- Sub-Head : Water Supply

PAGE-13 of 26 Digitally signed by Om Prakash

ITEM NO Description of Items Unit Qty. Rate Amount

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water

supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m

spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints

complete as per direction of Engineer in Charge. : Internal work - Exposed on wall

18.7.1 15 mm nominal outer dia. Pipes. metre 5.00 286.8 1434.00

18.7.2 20 mm nominal outer dia. Pipes. metre 3.00 335 1005.00

18.7.3 25 mm nominal outer dia .Pipes. metre 5.00 401.55 2007.75

18.7.4 32 mm nominal outer dia. Pipes. metre 4.00 518.75 2075.00

18.7.5 40 mm nominal outer dia. Pipes. metre 6.00 702.95 4217.70

18.7.6 50 mm nominal outer dia. Pipes. metre 5.00 934.15 4670.75

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water

supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This

18.8 includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and 0.00

making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed

work, including cutting chases and making good the walls etc.

18.8.1 15 mm nominal outer dia .Pipes. metre 143.00 497.8 71185.40

18.8.2 20 mm nominal outer dia .Pipes. metre 138.00 537.6 74188.80

18.8.3 25 mm nominal outer dia .Pipes. metre 70.00 627.25 43907.50

18.8.4 32 mm nominal outer dia .Pipes. metre 40.00 739.3 29572.00

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.

: Internal work – Exposed on wall.

18.10.1 15 mm dia. nominal bore metre 2.00 366.4 732.80

18.10.2 20 mm dia. nominal bore metre 3.00 437.3 1311.90

18.10.3 25 mm dia. nominal bore metre 10.00 551.7 5517.00

18.10.4 32 mm dia. nominal bore metre 5.00 667 3335.00

18.10.5 40 mm dia. nominal bore metre 5.00 811.9 4059.50

18.10.6 50 mm dia. nominal bore metre 12.00 1048.35 12580.20

18.12 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work 0.00

18.12.1 15 mm dia. nominal bore metre 2.00 322.15 644.30

18.12.2 20 mm dia. nominal bore metre 4.00 368.6 1474.40

18.12.3 25 mm dia. nominal bore metre 10.00 467.75 4677.50

18.12.4 32 mm dia. nominal bore metre 10.00 540.3 5403.00

18.12.5 40 mm dia. nominal bore metre 40.00 617.05 24682.00

18.12.6 50 mm dia. nominal bore metre 30.00 762.15 22864.50

18.12.7 65 mm dia. nominal bore metre 100.00 896.6 89660.00

18.12.8 80 mm dia. nominal bore metre 300.00 1041.7 312510.00

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee,

including cutting and threading the pipe etc. complete :

18.13.1 25 to 40 mm nominal bore Each 2.00 911.9 1823.80

18.13.2 50 to 80 mm nominal bore Each 4.00 1785.35 7141.40

Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long

screws etc. complete (cost of water meter and stop cock to be paid separately).

18.15 Providing and fixing brass bib cock of approved quality : 0.00

PAGE-14 of 26 Digitally signed by Om Prakash

ITEM NO Description of Items Unit Qty. Rate Amount

18.15.2 20 mm nominal bore Each 5.00 379.2 1896.00

18.16 Providing and fixing brass stop cock of approved quality : 0.00

18.16.1 15 mm nominal bore Each 2.00 353.25 706.50

18.16.2 20 mm nominal bore Each 4.00 379.2 1516.80

18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 0.00

18.17.1 25 mm nominal bore Each 4.00 622.4 2489.60

18.17.1A 20 mm nominal bore Each 1.00 539.95 539.95

18.17.2 32 mm nominal bore. Each 2.00 689.6 1379.20

18.17.3 40 mm nominal bore Each 2.00 826.1 1652.20

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

18.18.1 15 mm nominal bore Each 4.00 406.85 1627.40

18.18.2 20 mm nominal bore Each 5.00 462.5 2312.50

18.18.3 25 mm nominal bore Each 3.00 464.05 1392.15

18.19 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 0.00

18.19.1 25 mm nominal bore 0.00

18.19.2 32 mm nominal bore 0.00

18.19.3 40 mm nominal bore 0.00

18.19.4 50 mm nominal bore 0.00

18.19.5 65 mm nominal bore 0.00

18.19.6 80 mm nominal bore 0.00

18.21 Providing and fixing uplasticised PVC connection pipe with brass unions : 0.00

18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 0.00

PAGE-15 of 26 Digitally signed by Om Prakash

ITEM NO Description of Items Unit Qty. Rate Amount

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse

sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete

slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary

excavation, foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size

) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating

coat of neat cement complete as per standard design :

18.32.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Each 5.00 1992.6 9963.00

Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming

coat, both of approved quality for new work :

18.38.1 15 mm diameter pipe. metre 2.00 19.4 38.80

18.38.2 20 mm diameter pipe. metre 3.00 23.25 69.75

18.38.3 25 mm diameter pipe. metre 10.00 30.25 302.50

18.38.4 32 mm diameter pipe. metre 5.00 36.35 181.75

18.38.5 40 mm diameter pipe. metre 5.00 42.65 213.25

18.38.6 50 mm diameter pipe. metre 12.00 51 612.00

18.41 Providing and filling sand of grading zone V or coarser grade all- round the G.I. pipes in external work. 0.00

18.41.1 15 mm diameter pipe metre 2.00 154.45 308.90

18.41.2 20 mm diameter pipe metre 4.00 156.55 626.20

18.41.3 25 mm diameter pipe metre 10.00 160.7 1607.00

18.41.4 32 mm diameter pipe metre 10.00 164.9 1649.00

18.41.5 40 mm diameter pipe metre 40.00 167 6680.00

18.41.6 50 mm diameter pipe metre 30.00 173.25 5197.50

18.41.7 65 mm diameter pipe metre 100.00 273.45 27345.00

18.41.8 80 mm diameter pipe metre 300.00 281.8 84540.00

18.41.9 100 mm diameter pipe metre 30.00 298.5 8955.00

18.41.10 150 mm diameter pipe metre 10.00 444.6 4446.00

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc.

complete (New work)

18.46.1 15 mm nominal bore Each 5.00 318.35 1591.75

18.46.2 20 mm nominal bore Each 12.00 346.8 4161.60

18.46.5 40 mm nominal bore Each 5.00 631.3 3156.50

18.46.6 50mm nominal bore Each 5.00 823.8 4119.00

18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: 0.00

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing

not less than 810 gms.

18.50.1 15 mm nominal bore. Each 5.00 820.7 4103.50

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to

PAGE-16 of 26 Digitally signed by Om Prakash

ITEM NO Description of Items Unit Qty. Rate Amount

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per

direction of Engineer-in-charge.

18.58 Providing and fixing PTMT grating of approved quality and colour.

18.58.1 Circular type.

18.58.1.2 125 mm nominal dia with 25 mm waste hole. Each 45.00 51.85 2333.25

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated

aluminium rod with L.P./ H.P.H.D. plastic ball.

18.62.5 50mm nominal bore, 242 mm long. Weighing not less than 1240 gms. Each 2.00 1375.9 2751.80

Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with

concealed fitting arrangements. Weighing not less than 106 gms.

Total (P) DSR Items 1252873.35

Sub- Sub-Head : Drainage

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of

cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :

PAGE-17 of 26 Digitally signed by Om Prakash

ITEM NO Description of Items Unit Qty. Rate Amount

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab

with 1:1.5:3 mix (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size),

foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal

19.7 size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating

coat of neat cement and making channels in cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal

19.7.1 dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of

19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 9.00 12770.55 114934.95

Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal

19.7.2 diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame

19.7.2.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 9.00 26405.5 237649.50

Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56 m dia at top in

cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3

(1cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1

cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished

with a floating coat of neat cement, all complete as per standard design :

0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter

conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete

19.9.1 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering,

shuttering all complete.(Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be

paid for separately) :

19.9.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1.00 12725 12725.00

19.10 Extra depth for circular type manhole 0.91 m internal dia (at bottom) beyond 0.91 m to 1.67 m

19.10.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Metre 1.00 7591.8 7591.80

Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement

mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement :3

coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand :

6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat

cement, all complete as per standard design :

1.68 m deep with SFRC Cover and frame (heavy duty HD- 20 grade designation) 560 mm internal diameter

conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete

19.11.1 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering,

shuttering all complete.(Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be

paid for separately) :

19.11.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1.00 24702.75 24702.75

19.12 Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 1.68 m to 2.29 m :

19.12.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Metre 1.00 9861.45 9861.45

PAGE-18 of 26 Digitally signed by Om Prakash

ITEM NO Description of Items Unit Qty. Rate Amount

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12

mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mm x 25 mm and over all

minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2

mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail

length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance

test as per specifications and having manufacture's permanent identification mark to be visible even after fixing,

including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand :6

graded stone aggregate 20 mm nominal size) complete as per design.

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved

19.19.2.2 Circular shape 500 mm internal diameter Each 4.00 1172.6 4690.40

Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover

to be not less than 4.5 kg.

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and

S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.

19.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1.00 26861.9 26861.90

Total (Q) DSR Items 562140.75

DSR-2022 INTERNAL ELECTRICAL

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate,

suitable GI box and earthingthe point with 1.5 sq.mm. FRLS PVC insulated copper conductorsingle core cable etc

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in

1.11 surface /recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing Point 40.00 1562.00 62480.00

the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/

1.12 recessed medium class PVC conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core Metre 1646.00 334.00 549764.00

cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/

1.13 recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core Metre 706.00 537.00 379122.00

cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper

conductor, single core cable in surface/ recessed medium class PVC conduit as required.

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 100.00 439.00 43900.00

1.14.9 4 X 6 sq. mm + 2 X 6 sq. mm earth wire Metre 100.00 754.00 75400.00

Supplying and drawing following pair 0.5 sq mm FR PVC insulated annealed copper conductor, unarmored

telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

PAGE-19 of 26 Digitally signed by Om Prakash

ITEM NO Description of Items Unit Qty. Rate Amount

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with

1.19 fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as Metre 30.00 47.00 1410.00

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess

including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including

connections but excluding modular plate etc. as required.

1.24.6 Telephone socket outlet Each 8.00 148.00 1184.00

1.24.7 TV antenna socket outlet Each 6.00 148.00 888.00

Supplying and fixing stepped type electronic fan regulator on the existing plate switch box including

connections but excluding modular plate etc. as required.

1.26 Supplying and fixing blanking plate on the existing plate & switch box excluding plate as required. Each 60.00 40.00 2400.00

1.27 Supplying and fixing following size, GI box & cover plate as required. 0.00

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including

1.31 providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as Each 120.00 477.00 57240.00

required. (For light plugs to be used in non residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including

1.32 providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection Each 120.00 586.00 70320.00

etc. as required.

PAGE-20 of 26 Digitally signed by Om Prakash

ITEM NO Description of Items Unit Qty. Rate Amount

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection

etc as required.

Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two

GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.

1.38 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. Each 4.00 99.00 396.00

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types,

1.41 complete with all accessories and tube/lamp etc. irectly on ceiling/ wall, including connections with 1.5 sq. mm Each 138.00 206.00 28428.00

FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto

1.45 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable, including providing and fixing Each 140.00 339.00 47460.00

phenolic laminated sheet cover on the fan box etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing,

commissioning etc. as required.

1.51 Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. Each 33.00 207.00 6831.00

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug

top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal

cover for the socket out let and complete with connections, testing and commissioning etc. as required.

2.0 MCCB, MCB & DB'S 0.00

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and

2.2 terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, 0.00

etc. as required.

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution

board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common

neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note :

Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

PAGE-21 of 26 Digitally signed by Om Prakash

ITEM NO Description of Items Unit Qty. Rate Amount

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for

2.10 inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning 0.00

etc. as required.

2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit

2.15 breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing 0.00

and commissioning etc. as required.

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick,

2.21 and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. Each 10.00 269.00 2690.00

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure

5.2 with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. Each 4.00 6855.00 27420.00

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including

5.9 connection/terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by Metre 41.00 144.00 5904.00

overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe

from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Total (R) DSR Items 2873001.00

PAGE-22 of 26 Digitally signed by Om Prakash

ITEM NO Description of Items Unit Qty. Rate Amount

FITTING AND FIXTURES

Supply, Installation, testing,commissioning, receiving the lighting fixture & fan including assembling etc. of the

NSE-1 following lighting fixtures including fixing arrangement and with all accessories as required with necessary GI

pipe/steel pipe etc as required for hanging of lighting fixtures.

Supplying, instalation, testing & commissioning of All fixtures shall be complete with lamps and required control

gear.All fluorescent tube light fixtures & LED fixtures shall be complete with control gear & power factor

improvement capacitor. Only high quality Electronic Ballasts are to be used. For dimmable fixtures, HF

dimmable electronic ballast to be used.Samples of all the fixtures with all available colour shall be submitted to

the architect/ client/ Project Manager before supply & approval is taken.Please check the fixtures final quantity

from the Architect / Project Manager before ordering and be sure of actual requirement prior to ordering.

Decorative ultra slim round profile 18W 6500 K l LED lighting fixture with extruded polycarbonate ,

i environmental friendly, energy efficient ready to used. High wattage (PC battens). Cat no. LHEXBLP7PN1W018, Each 150.00 449.00 67350.00

Slim round surface mounted 18W LED 6500 K panel with premium diffuser to ensure glare free & even light

distribution. LHEAAHP7IL 1W018, HAVELLS MAKE

Aesthetically designed recessed mounted panel in light weight plastic body available in 18W LED 6000 K.

LHEBFCP71Z1W018, HAVELLS MAKE

Supply of Ceiling Fan of 1200mm sweep complete erected in position with all accessories.(Make- Havels or

Supplying of approved make Exhaust Fan of the following sizes and its all accessories suitable for operation on

230V single phase, 50 Hz, AC supply complete as required.

Supplying installation, testing commissioning of telephone tag block or similar specification of other approved

makes. of the following sizes

Supplying & fixing of following capacity TP&N MCB inside the existing panel board with drilling holes in cubicle

panel, making connections, etc. as required.

FIRE SUPRESSION SYSTEM

Supply of ISI marked (IS:2878) Squeeze Grip carbon-di-oxide gas type fire extinguisher with cylinder of 4.5 kg.

NSE-05 capacity complete with suitable length hose and horn duly charged and ready for use GI bracket for wall Each 4.00 17163.00 68652.00

mounting etc. as required.

Supply of ISI marked (IS:13849) ABC dry powder 6 kg. fire extinguisher with cylinder fully charged complete

with bakelite horn discharge tube, GI bracket for wall mounting etc. as required.

Providing and fixing of 2W LED based Exit Sign Board (Bajaj BHEX 20 R AC or other makes of similar

specification) as complete required.

PAGE-23 of 26 Digitally signed by Om Prakash

ITEM NO Description of Items Unit Qty. Rate Amount

NSE-8 STREET LIGHT FEEDER PILLER:

Supply, installation, testing and commissioning of Street Light Feeder piller suitable for operation on 415V, 50

Hz, 5 wire, AC system capable of withstanding fault level of 16KA, 415 volts. The panel shall be outdoor, floor

standing, Thermoplastic Polycarbonate, compartment type enclosure of IP-54 (EN 60 529) with necessary bus

bar and cable alleyes and panel size of 1700x2050x710mm. The incoming and outgoing feeders shall be

accomodated in a multi-tier arrangement, earting, sign writing, numbering shall be complete with foundation

channel as per specifications & single line diagram and comprise of the following switchgear and accessories:

(Shop drawing to be got approved by the Engineer-In-Charge prior to fabrication).

i) 1 No. 63A 4P 16KA MCCB with Thermal Magnetic Release with Rotary Extended Handel

ii) 1 No. 63A 4P 25KA CONTACTOR

iii) 3 Nos. CT's 60/5A

iv) 3 Nos. R, Y B PHASE Indicator Lamp- LED type 220VAC

v) 2 Nos. ON/OFF Indicator Lamp- LED type 220VAC

vi) 2 Nos. Start/ Stop Push Button

vii) 3 Nos. 06A Control MCB

1 Set - 200A TPN electrolytic aluminium bus bar for complete panel suitable for 25KA fault level covered with

colour coded PVC sleeves.

i) 4 Nos.- 40A, 3 Pole MCB, having breaking capacity of 10KA Set 1.00 100137.00 100137.00

Supply of 1.1 KV grade PVC insulated PVC sheathed XLPE aluminium conductor armoured cable conforming to

NSE-9 IS:1554 Part-I of the following sizes (Shop drawing of cable layout to be got aproved by the Engineer-In-Charge 0.00 0.00

prior to purchase).

a) 3.5C x 95 Sqmm (for feeder Piller) Mtr 700.00 1741.00 1218700.00

b) 4 C x 25 Sqmm (for feeder Piller) Mtr 510.00 572.00 291720.00

c) 4 C x 10 Sqmm (for Street light) Mtr 10.00 439.00 4390.00

Supply, installation, testing & commissioning of Havells Street lights 50W LED 6500 K with best in class design

NSE-10 & Robust heat sink along with class leading IP. IK & surge protections for long lasting performance. Code: Each 10.00 3975.00 39750.00

LHEXAYP7PN6K050N HAVELLS MAKE

Supply, erection, testing and commissioning of 6 M high Tubular pole as per Technical specifications and with

NSE-11 following components :-

Including supply and installation of 6 ways-20A connector & 6A MCB mounted on 6mm thick painted M.S/GI

plate, insulated, and fixed inside the pole suitable for termination of armoured aluminium cable as required and

wiring to Luminaries from the 6A MCB, with 3x2.5 sq.mm. PVC insulated copper, stranded conductor (P+N+PE)

double sheathed wire including terminations.

6 meters high tubular pole with single arm of length 1 meter, smoothly curved making an angle of 10 deg to 15

deg with the horizontal plane complete as required.

NSE-12 BUILDING PANEL

1 No. 200 amps 4P MCCB(16KA) with thermal Magnetic release (PRTM) with Class-C transient voltage surge

suppression device suitable for 3 phases as per specifications.

PAGE-24 of 26 Digitally signed by Om Prakash

ITEM NO Description of Items Unit Qty. Rate Amount

1 No.200 amps ATS

METERING & INDICATION for each Incomer

1 set of R,Y,B phase indicating lamps

Multifunction digital meter (consisting of Voltage, Current, Frequency, PF, kWh, kVA, harmonics upto 15th order

& %THD) with RS-485 Port.

Sets of 200/5A, CL-1, 15VA CTs for measuring.

Sets of phase indicating lamp with 2A control MCBs.

200A TPN Aluminium Bus Bar with colour coded PVC Sleeves

5 Nos. 63 Amp TPN MCB

5 Nos. 40 Amp tpn MCB

Building panel as described above Set 1.00 178281.00 178281.00

Sub Total (S) Non Shedule Items 3051990.00

SCHEDULE ITEMS: EXTERNAL ELECTRICAL WORKS

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing

surface/ recessed steel/ PVC conduit as required.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure

5.2 with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. Each 5.00 6855.00 34275.00

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/

recessed conduit/ submain wiring/ cable as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size

7.1 direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as 0.00

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in

the existing RCC/ HUME/ METAL pipe as required.

PAGE-25 of 26 Digitally signed by Om Prakash

ITEM NO Description of Items Unit Qty. Rate Amount

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of

following size on wall surface as required.

7.7.1 Upto 35 sq. mm (clamped with 1mm thick saddle) Metre 252.00 55.00 13860.00

Supplying and making end termination with brass compression gland and aluminium lugs for following size of

9.1 PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded

stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

11.3.1 Above 4.5 metre and upto 6.5 metre Each 17.00 5121.00 87057.00

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars,

14.14 jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as 0.00

Sub Total (T) DSR Items 297120.00

GRAND TOTAL BOQ 35170377.00

GRAND TOTAL BOQ 35170377.00

PAGE-26 of 26 Digitally signed by Om Prakash