Repairs to Various Buildings (Boys Hostel, Girls Hostel, School Building, Boundary Wall, RCC Road) in Adarsh Niwasi Shala Premises at Mangavapal, Ta. & Dist. Amreli. ( General Repairing and renovation work, RPWD Items, RCC Road & Repairs to Boundary Wall )

Name of Work :- Repairs to Various Buildings( Boys' Hostel, Girls' Hostel, School Building, Boundary Wall, RCC

Road ) in Adarsh Niwasi Shala Premises at Mangavapal, TA. & Dist. : Amreli. ( General Repairing

and renovation work, RPWD Items, RCC Road & Repais to Boundary Wall )

BILL OF QUANTITIES

It. Qty Estimated Item of work Estimated rate Unit Total Amount

It. Qty Estimated Item of work Estimated rate Unit Total Amount

No but may be In Figures according to

more or less. estimated

1 5062.00 Removing and scraping of old deteriorated plaster of 19.880 SQM

any thickness fromm wall / R.C.C member including

stacking of serviceable material and disposal of

unserviceable from site of work with all lead and lift

2 1045.00 Dismantling tiles or stone floors laid in mortar 49.110 SQM

including stacking of serviceable materials and

disposal of unserviceable materials with all lead and

3 64.00 Dismantling sanitary fittings like wash basin, W.C. 414.230 No.

pan, Indian and European type flushing tank etc.

including stacking the materials with all lead and lift.

4 731.00 Dismantling C.I. pipes G.S.W. Pipes and A.C. rain 76.670 MTR

water pipes with fittings and clamps including

stacking the materials with all lead and lift. (for any

5 243.00 Dismantling doors, windows, ventilators, etc. (Wood 192.090 No.

or steel shutters including chowkhats, Architraves,

Holdfasts and other attachment etc. complete and

stacking them within all lead and lift. 1. Not exceeding

6 6.00 Demolition including stacking of serviceable material 1082.350 CUM

and disposal of unserviceable material with all lead

and lift (I) RCC work.

7 78.75 Demolition of Brick work and stone masonry 562.890 CUM

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and

lift.(ii) In Cement Mortar.

8 159.00 Demolition and disposal of unserviceable materials 541.170 CUM

with all lead and lift.(i) Lime concrete.

9 6.00 Dismantling doors, windows, ventilators, etc. (Wood 254.680 No.

or steel shutters including chowkhats, Architraves,

Holdfasts and other attachment etc. complete and

stacking them within all lead and lift. 1. Exceeding

10 660.75 Excavation for foundation upto 1.5 m depth 122.935 CUM

including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

50 Meter lead.(A) Loose or soft soil

11 52.00 Excavation for foundation from 1.5 m to 3.0 m depth 136.300 CUM

including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

50 Meter lead.(A) Loose or soft soil

12 128.65 Filling available excavated earth (excluding rock) 136.910 CUM

in trenches. plinth, sides of foundations etc. in

layers not exceeding 20 cm. in depth consolidating

Nos. disposited layer by ramming and watering.

13 2.00 Providing and laying cement concrete 1:3:6 (1- 3095.240 CUM

Cement : 3- coarse sand : 6- hand broken stone

aggregates 40 mmnominal size) and curing complete

excluding cost of formwork in (A) Foundation and

14 335.35 Providing and laying cement concrete 1:2:4 (1- 3805.285 CUM

Cement : 2- Coarse sand : 4- graded stone aggregates

20 mm nominal size) and curing complete excluding

cost of formwork in (A) Foundation and Plinth (upto

15 604.90 Providing, laying, spreading and compacting stone 1108.150 CUM

aggregates of specific sizes to WBM Grade-I

specification using 63mm to 45mm metal (@

0.91CUM per 10 sqmt loose qty) with stone screening

of 11.2mm (@ 0.18CUM per 10 sqmt loose qty) and

stone dust (@ 0.06CUM per 10 sqmt loose qty) as

filler material, including spreading in uniform

thickness, with consolidation by vibratory roller in

stages to proper grade and camberm applying and

brooming requisite type of screening / binding

materials to fill up the interstices of coarse aggregate,

watering and compacting to the required density as per

MoRTH. (By Mechanical Means). as directed by the

Engineer in Charge.

16 610.00 Providing and fixing pre-cast concrete kerb stone of 392.583 MTR

gray cement based concrete block 30cm length,30cm

height and 15cm thick of M250 grade concret as per

approved design and including excavation for fixing in

proper line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

17 132.60 Providing and laying brick bat cement concrete 1:3:6 3070.930 CUM

(1cement : 3coarse sand : 6 brick bats) and curing

complete excluding cost of form work in : (a)

Foundation and plinth.

18 3330.00 20 mm. Thick sand faced cement plaster on walls up 342.410 SQM

to height 10 meters above ground level consisting of

12 mm. Thick backing coat of c.m. 1:3 (1 cement :

sand) and 8 mm. Thick finishing coat of c.m. 1:1 (1

cement : 1 sand) etc. complete.

19 1750.00 Providing 15 mm. Thick cement plaster in single coat 246.040 SQM

on fair side Brick/concrete walls for interior plastering

up to floor two level and finished even and smooth in :

(I) Cement Mortar 1:3 ( 1-Cement : 3-Sand ) including

finishing with a floating coat of neat cement slurry.

20 477.00 Providing 10mm thick cement plaster in single coat on 145.650 SQM

brick/concrete walls for interior plastering upto floor

two level and finished even and smooth in (i)Cement

mortar 1:3 (1-cement:3-sand)

21 908.00 Chipping off existing loose, damaged cracked concrete 237.980 SQM

etc. from R.C.C. member i.e. columns/ beams, slabs

etc. upto 4mm beyond reinforcement, carefully by

chisel and hammer including cleaning of rusted

reinforcement and exposed surface by mechanical wire

brush, or any other established method and applying

rust removing solution like Rusticide or rustoline with

cotton waste swab to reinforcement, as per

manufacturer's recommendations, washing thoroughly

with potable water etc. complete.

22 908.00 Providing and applying a priming CUM bonding coat 233.270 SQM

of Sika Latex Power or equivalent of approved make

and quality using 1.0 kg cement with 0.30 kg sika

latex power , the sika latex power diluted with water

in proportion 1:2 as per manufacturers specification

including scaffolding etc. complete. For all Floor.

23 908.00 Providing and applying polymer mortar 10mm thick in 634.970 SQM

single coat on damaged side of RCC Members like

Column, Beam, Chhaja, Slab, Vertical/Horizontal fins

etc. using Sika Latex Power liquid chemical or

equivalent make of approved make and brand in

proportion 1.0 kg cement with 0.16 kg sika latex

power , the sika latex power diluted with water in

proportion 1:4 as per manufacturers specification

including scaffolding etc. complete. For all Floor.

24 10.10 Providing and laying Both side polished GRANITE 2423.300 SQM

Stone 18 mm.thick ( all edge machine cut and

rounding mirror polished) of approved shade for CB

Shelf / Urinal Partition purpose including making

groove in the wall, moulding the open edges full round

and jointed with grey cement slurry including rubbing

and polishing etc. complete. as required and directed

by Engineer- in-Charge.

25 181.00 Providing and laying Both side polished GREEN 1662.370 SQM

MARBLE Stone 15-18 mm.thick ( all edge machine

cut and rounding mirror polished) of approved shade

for CB Shelf / Urinal Partition purpose including

making groove in the wall, moulding the open edges

full round and jointed with grey cement slurry

including rubbing and polishing etc. complete. as

required and directed by Engineer- in-Charge.

26 191.00 Providing and laying Ceramic tiles 6mm thick in 992.150 SQM

flooring treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1-cement : 3-coarse

sand ) finishing with flush pointing in white cement.

27 1882.00 Providing and laying coloured glazed tiles of the size 1488.230 SQM

mm in skirting, risers of steps and dedo on 10 mm.

thick cement plaster 1:3 (1 cement : 3 coarse sand) &

jointed with white cement slurry.

28 1441.00 Providing and Fixing pre-cast Rubber Dye / Steel dye 698.250 SQM

inter locking Concrete block 80mm thick with grade

of concrete M-25 pneumatic compressed/Vibrated

mechanically and as per approved design confirming

to IS 15658 : 2006 including 35 mm sand layer for

levelling and filling the joint with sand in proper line

and level as per guidelines of IRC SP 63-2018 etc.

29 423.00 Providing and laying Granite Stone 18 mm.thick ( all 3235.970 SQM

edge machine cut and rounding mirror polished) in

Cills & Jambs incl. applying coarse-CUM-fine sand

on the back side of the granite with approved adhesive

like Araldite or eq. to make the surface rough for

better bonding with the wall surface on 10 mm. thick

Cement Mortar 1:3 (1-cement, 3-coarse sand) laid and

jointed with white cement slurry including rubbing

and polishing complete. use single piece or two pieces

incl. overlapping in up-down position granite stone

for jambs & soffits as required and directed by

Engineer- in-Charge.

30 5.50 Providing and Fixing Sandwich type standing 5880.660 SQM

plateform in kitchen using 18mm thick Black

GRANITE in top and sides and and 25 to 30 mm

thick one side polished Kota Stone in base including

0.60 mt. wide vertical support of both side polished

polished Kota Stone and one horizontal shelf 60 cm

wide below plateform as required and including 50mm

wide facia patti in front incl. moulding the exposed

edges in half round with all material, tools and labour

etc. complete as directed by Engineer-In-Charge.

31 36.00 Providing and laying Black Granite Stone 18 3188.810 SQM

mm.thick ( all edge machine cut and round moulding

mirror polished) of approved shade in existing

plateform incl. applying with mixture of sand and

approved adhesive like Araldite or eq. to make the

surface rough for better bonding with the wall/floor

surface and jointed with white/colour cement slurry

including rubbing and polishing complete. use single

piece or two pieces as required and directed by

Engineer- in-Charge.

32 28.00 Construction of 600mm deep Cup-board using 30mm 1922.730 SQM

thick Both-Side Polished Kotastone Horizontally at

0.60 M c/c and Vertically 0.90 M c/c including front

edge mirror polished and making groove in wall and

fixing the kota using cement or proper adhesive (

Araldite or eq. ) etc. complete as per detail drawing

and directed by Engineer-in-charge.

33 26.25 Providing and Fixing standing plateform / Seating 3432.750 SQM

Table for Mesh using 25 to 30 mm thick Kota Stone

for Base including 0.60 mt. wide vertical support of

polished Kota Stone as required including round

mouldin all exposed edge with all material, tools and

labour etc. complete as directed by Engineer-In-

34 6.00 Providing and fixing Kitchen SS Sink Glosy ASIS 304 2029.940 No.

Grade 1mm thick with overall size 610 X 460 mm &

Bowl size 560X410X200 with C.I. or M.S. Brackets,

painted white including cutting holes in walls and

making good the same etc. complete.

35 1524.00 Providing and laying broken chine mosaic 779.690 SQM

flooring for terrace using 12 mm to 20 mm broken

pieces of glazed tiles to be laid over cement mortar

1:3 to plain or slope and to be tempered to bring

mortar creme out upto surface using white cement

including rounding off junctions and extending them

upto 15 cm along the wall,clearing with water and

oxalic acid etc. as directed.

36 94.00 Providing laying and jointing in true line and level 72.640 MTR

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

37 286.00 Providing laying and jointing in true line and level 91.830 MTR

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as directed

including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

38 189.00 Providing laying and jointing in true line and level 195.660 MTR

50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concelled as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

39 20.00 Providing and Fixing 15mm dia PVC Heavy Duty 482.020 No.

valve of approved quality with required fitting and

adhesive incl. fixing the same with new or existing

line as directed by EIC.

40 44.00 Providing and Fixing 25mm dia PVC Heavy Duty 580.750 No.

valve of approved quality with required fitting and

adhesive incl. fixing the same with new or existing

line as directed by EIC.

41 24.00 Providing and Fixing 50mm dia PVC Heavy Duty 1010.500 No.

valve of approved quality with required fitting and

adhesive incl. fixing the same with new or existing

line as directed by EIC.

42 434.00 Providing, laying and jointing in true line and level 876.900 MTR

110 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end socketed

with rubber ring, & fittings conforming to ISI 14735-

1999 of approved make for drainage system pipe line,

pipe shall be jointed with Nos. other with rubber

lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diametre x 149 mm length x

145 mm heigh at every 2000 mm center to center or

shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

43 280.00 Providing, laying and jointing in true line and level 834.380 MTR

160 diametre U.P.V.C (Type B) conforming to IS

13592-1992 with one end plain and other end socketed

with rubber ring, & fittings conforming to ISI 14735-

1999 of approved make for drainage system pipe line,

pipe shall be jointed with Nos. other with rubber

lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 160 mm diametre x 210 mm length x

196 mm heigh at every 2000 mm center to center or

shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

44 12500.00 Providing erecting and fixing tripple layer PVC water 10.120 Litre

tank in White colour of required capacity Nos.

including necessary transportation to the site, lifting to

terrace at any heights, fixing fitting and connecting to

inlet and outlet with all necessary fittings &

connection complete on terrace.

45 200.00 Providing and fixing screw down bib taps of following 186.820 No.

size : (B) Brass chromium plated screw down bib tap

46 42.00 Providing and fixing urinal approved quality 1631.870 No.

connecting the urinal with integral longitudinal flush

pipe. (A) Squantting Plate pattern white earthen ware

47 42.00 Providing and Fixing brass chromium plated bright 725.930 No.

finished 15mm dia. Push Cock specialy designed for

urinal of approved quality and design as directed by

48 98.00 Providing and fixing PVC SWR Nahni trap IS 14735 569.700 No.

for drain - 100 mm diameter with jali of the following

nominal diameter of self cleansing design with C.I

scread down or hinged grating including the cost of

cutting and making good the walls.

49 58.00 Providing and fixing Water closet squatting pan ( 2478.630 No.

Indian type W/C pan )size 580mm. including

earthwork footrest and trap inletconnection for flush

pipe and chromium plated brass half turn flushing

valve 25mm.dia. W.C. pan vitrious china long pattern

50 8.00 Providing and fixing wash down water closet 4660.050 No.

(European type, W.C. Pan )with integral 'P' or 'S' trap

including jointing the trap with soil pipe in cement

mortar 1:1 (1 cement : 1fine sand) including providing

and fixing wash down water closet with C.P. Brass

hinges and rubber buffers including Providing and

fixing Jet Sprey , Seat Cover, 15mm dia angel Valveof

approved quality etc. complete.

51 40.00 Providing and fixing wash basin with single hole for 2208.670 No.

pillar tap with C.I. Or M.S. brackets painted white

including cutting holes and making good the same but

excluding fittings :(ii) Flat back wash basin 500mm x

400mm size including 15mm dia Pillar Tap, Waste

pipe, M.I Fisher Union, 15mm dia stop cock etc.

52 38.00 Providing and fixing 600 mm. X 450 mm. Bevelled 859.400 No.

edge mirror of superior glass mounted on 6 mm. Thick

A.C, sheet or plywood sheet and fixed to wooden

plugs with C.P. brass screws and washers.

53 38.00 Providing and fixing C.P. brass towel rail complete 616.420 No.

with C.P. Brass brackets fixed to wooden plugs with

C.P. Brass screws. (B) 600 mm x 20 mm size

54 38.00 Providing and fixing S.W. gully trap with C.I. grating 1292.190 No.

brick masonry chamber and water tight C.I. cover with

frame of 300mm x 300mm size (inside) with standard

weight.(i) Square mouth traps. (A) 100mm x 100mm

size P type. (upto 10 ton)

55 21.00 Constructing Manhole with R.C.C. top slab in 1:2:4 11042.740 No.

mix (1-cement :2-coarse sand : 4-graded stone

aggregate 20mm nominal size) foundation concrete

1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats

+ 50mm size) inside plastering 15mm thick with

Cement Mortar 1:5 (1-Cement : 5-coarse sand)

finished with a floating coat of neat cement and

making channels in cement concrete 1:2:4 mix (1-

Cement :2-Coarse sand :4-stone aggregate 20mm

nominal size) finished smooth complete including

curing and festing (i) Inside size 900mm x 1200mm

and 1.5M. deep including C.I. cover with frame size

560mm diameter total weight of cover and frame to be

not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of

frame 64 Kg.)(A) With 230mm thick walls of brick

msonry using brick having crushing strength not less

than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1-

Cement: 5-Coarse sand) (2) B type depth

Metre for 150mm diameter sewer.

56 11.00 Providing sock pit of 5.0Cu.M. volume including 3457.270 No.

excavating sand filling brick bats with dry masonry

work at top for 45cm height including covering

the top with stone including providing vatas in C.M.

1:3 with finishing curing etc. complete as directed.

57 5.00 Providing and Constructing Septik Tank of 7.20 x 149094.310 No.

3.46 x 2.50 ( outer diemnsions) and 6.74 x 3.00 x 2.5 (

inner dimensions ) including necessary excavation,

15cm thick B.B.C.C. in bottom of the tank, providing

23cm thick brick masonary outer wall in C:M 1:6,

Nos of partition wall of half brick masonary in C:M

1:5, RCC Slab in 1:2:4 with reinforcement as directed,

15mm cement plaster on inside surface of

brickmasonary, Verticle cement vata on Nos. corner of

the wall,110mm dia. PVC pipe in bottom etc.complete

incl. all labour, material , excavation etc. complete as

per detail drawing and instruction given by Engineer-

58 5156.00 Removing dry or oil bound distemper by a ashing and 11.530 SQM

scrapping and sand papering the wall surface smooth

including necessary repairs to scratches complete.

59 844.00 Applying two coats of white cement based acrylic 40.590 SQM

lapy- putty & two coats of primer of approved brand

and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free

from mortar dropping and other foreign matter and

sand papered smooth.

60 3811.00 Distempering (two coats) with oil bound distemper of 75.670 SQM

approved brand & manufacturer & of required shade

on WALL SURFACES to give an even shade, over &

including a priming coat with a distemper primer of

approved brand & manufacture after thoroughly

brushing the surface free from mortar dropping &

other foreign matter & also including preparing the

surface even & sand papered smooth.

61 3105.00 Distempering (two coats) with oil bound distemper of 84.030 SQM

approved brand & manufacturer & of required shade

on CEILING / SLOPPING SURFACES to give an

even shade, over & including a priming coat with a

distemper primer of approved brand & manufacture

after thoroughly brushing the surface free from mortar

dropping & other foreign matter & also including

preparing the surface even & sand papered smooth.

62 6934.00 Finshing Wall with weather proof exterior emulsion 120.260 SQM

paint on wall surface (two coates) to give an required

shape even shade after throughly brushing the surface

to remove all dirt, and remains of loose powdered

materials etc. complete.

63 624.50 Painting Two coat (excluding priming coat) on 100.250 SQM

previously painted steel and other metal surfaces with

enamel paint brushing to give an even shade including

cleaning the surface of all dirt, dust and other foreign

64 116.00 Providing and fixing window having extruded 1713.690 SQM

aluminum Colour anodized section frame main outer

size 63.50 x 38.10 x 1.95 mm @ Wt 1.094 Kg / Rmt,

horizontal two track member size 61.85 mm x

mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical member

of size 61.85 mm x 31.75mm x 1.30 mm @ wt.of

0.0.659 Kg/mt with sliding shutters of horizontal

member size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt, vertical member of size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt with 5 mm thick

transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

details etc complete for window.

65 50.00 Providing and fixing standared extruded of colour 2817.030 SQM

anodized alluminium section frame main outer size

with Louvers of standard quality and providing 5 mm

thick transparent glass and 10mm dia. MS rod as pe

details etc complete for Ventilation.

66 60.00 Providing and fixing extruded aluminum window 2140.330 SQM

having extruded aluminum Colour Powder Coated

section frame main outer size 127mm x 38.10mm x

1.35mm ,@ Wt.1.384 Kg/mt,horizontal Four track

member size 122.20mm x 31.75mm x 1.10mm @ Wt.

1.205 Kg/mt,vertical member of size 122.20mm x

31.75mm x 1.50mm ,@ Wt. 1.398 Kg/mt with sliding

shutters of horizontal member size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt,vertical member of size

with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to

frame as per details etc complete for window.

67 116.00 Providing and fixing DOOR of powder coated 3490.990 SQM

alluminium section size bottom rail 114.00 x 44.45 x

1.70 mm @ 1.490 kg/ Rmt, middle rail 48.80 x

x 1.70 mm @ 0.94 kg/ Rmt, top rail 47.00 x 44.45 x

1.62 mm @ 0.833 kg/ Rmt, style 47.00 x 44.45 x

mm @ 0.887 kg/ Rmt, clip 19.20 x 17.00 x 0.70 mm

@ 0.094kg/ Rmt, 5 mm thick plain glass including

S.S. hinges ,Mortised lock, powder coated aluminum

fixture and fastenings etc. complete.

68 13.50 Providing and fixing 38mm thick SINGLE SHUTTER 5836.730 SQM

HINGED flush door of BWP Grade confirming to IS-

710 of approved quality and design including applying

of 1mm thick laminate sheet of approved quality and

design to both both side, all edges shall be covered

with 35x12mm first class teakwood bedding incl.

required steel finished brass hardware like hinges,

handles, mortice locks, door stop, stoppers and

lock,etc. of approved brands and including extruded

aluminum colour anodized "L" section main outer

frame size 63.50mm x 38.00mm x 2.50mm (of jindal

section 19552 @ Wt.1.1165 kg/mt) filled with country

wood and providing and applying minimum 3 coats of

Melamine Polish and two coats of sealer etc. complete

as directed by Engineer-in-Charge.

69 57.50 Providing and fixing 38mm thick DOUBLE 5914.310 SQM

SHUTTER HINGED flush door of BWP Grade

confirming to IS-710 of approved quality and design

including applying of 1mm thick laminate sheet of

approved quality and design to both both side, all

edges shall be covered with 35x12mm first class

teakwood bedding incl. required steel finished brass

hardware like hinges, handles, mortice locks, door

stop, stoppers and lock,etc. of approved brands and

including extruded aluminum colour anodized "L"

section main outer frame size 63.50mm x 38.00mm x

2.50mm (of jindal section 19552 @ Wt.1.1165 kg/mt)

filled with country wood and providing and applying

minimum 3 coats of Melamine Polish and two coats of

sealer etc. complete as directed by Engineer-in-

70 102.00 Providing and fixing 1mm thick M.S. Sheet Door with 3846.110 SQM

frame using 40x40x6mm angle iron allround and

providing same 2 Nos. of same angle Horizontally and

6 nos. cross diagonally and 3mm M.S. gusset plate at

the junctions and corners, all necessary fittings incl.

Nos. of 100x58x1.9mm Iron Hinges, 2 Nos. of

150mm Long Iron Handles, 2 Nos. of Iron Aldrops

20mm Dia and 35Cms Long and providing and fixing

50x50x6 mm M.S. Angle for Framing incl. applying a

priming coat of approved steel primer and two coats of

oil painting of approved shade etc. complete as per

detail drawing and as directed by Engineer-in-Charge.

71 246.00 Providing and fixing Godrej Type Steel cupboards in 4004.180 SQM

wall with steel frames and shutters using 20 gauge

M.S. steel sheet including necessary fixtures

fastening like locks, handles, hinges, aldrops of

approved quality and spray painting with approved

shade etc. complete as directed by Engineer-in-

72 77.00 Providing and fixing in position callapsible steel 6116.590 SQM

shutters with vertical channels 20 x 10 x 2 mm braced

with flat iron diagonals 20 x 5 mm size with top and

bottom rails of T_rin 40x 40 x 6 mm with 38mm dia,

steel pulleys complete with bolts, nuts, locking

arrangements, stoppers handles including applying a

priming coat of read lead paint.

73 35.75 Providing and fixing Stair Railing consisting of 2080.600 SQM

40x40x5 mm M.S. Hollow square pipe ( one ) on top

of the railing and for vertical member at 2.00 M c/c

and horizontal intermediate 25x25x3 mm M.S. hollow

square pipe at minimum 30 cm c/c as per pattern

shown on drawing including grouting the verticle pipe

in existing floor with suitable anchore bolts and

fastening and applying one coat of primer and two

coats of oil painting etc. complete as directed by

Engineer-in-Charge.

74 4.40 Providing and fixing 32mm thick pine flush door of 5201.810 SQM

approved quality and design including fixing of 1mm

thick laminate sheet of approved quality and design

both side, all edges shall be covered with 35x12mm

first class teakwood bedding incl. required hardware

like hinges, handles, mortice locks, door stop, stoppers

and lock etc. of approved brands and fixtures and

fasteners, glass, battens, bars etc. etc. complete as

directed by Engineer-in-Charge.

75 6088.00 Providing and fixing M.S. Grills for Window 106.901 Kg

Ventilators etc openings , made of of 16 mm size

Bright bars, framed in M.S.Flat 75x6 mm size at

10cm. c/c in Horizontal intervals, welding bright bars

in frame incl. cutting, transportion, primer & oil

painting, fixing in position etc. complete.

76 24.60 Providing and fixing rolling shutters of approved 3554.400 SQM

make made of 80 mm wide M.S. laths inter-locked

together through their entire length and jointed

together at the ends by end locks mounted on specially

designed pipe shaft with bracket plates, guide channels

and arragements for inside and outside locking with

push-pull operation including the cost of hood cover

and spring etc. complete.(A) Shutters having width

77 12.00 Providing and fixing AISI 304 Grade stainless steel 1465.060 MTR

knock down railing system for disabled toilet or

washbasin comprising 50mm dia Railing Pipe one

end fixed on wall with anchor bolt and The balustrade

shall be mounted on floor with base plate using

specially designed anchor fasteners and concealed by

AISI 304 Grade SS base cover cap etc. complete as

directed by Engineer-in-Charge.

78 28.00 Supplying and Fixing 4.5 Kg Fire Extinguisher, CO2 4413.700 No.

Gas as per IS 15222 / ISI 15683 for fire classes BC &

Electrical Fire, Discharge Control mechanism fitted

with high pressure steel braided Discharge Hose and

Flat Horn with diffuser Nozzles for dispersed

discharge of CO2, internal coating not applicable &

external coating of enamel spray painting, Cylinders

construction: hot spinning seamless & bearing ISI

mark, confirm to IS 7285 and PESO/CCOE Nagpur

approved. Fire Class 21B rating as per IS 15683 and

79 28.00 Supplying and Fixing Fire Extinguisher as per IS : 3542.570 No.

15683 with ISI Marked, Type : ABC, Capacity : 06 kg,

Fire Rating : 4A, Stored Pressure Type, Filled with

50% Mono Ammonium Phosphate based multi

purpose Dry Powder suitable for Class A, B & C Fire,

Pressurized by Dry Nitrogen, Complete with all

respect with stand/wall mounting bracket

80 380.40 Box cutting the road surface to proper slope and 109.410 CUM

camber for making a base for road work including

removing the excavated stuff and depositing on the

road side slope as directed upto all .lead.

81 152.20 Providing and cast in situ ordinary cement concret M- 7054.850 CUM

250 for average 20 cm thick wearing coat / C.C.

pavement laid as directed in approved fixed side form

work of steel channel including vibrating by screed-

needle vibrator and finishing by plate vibrator and

finished in continous operation including providing of

contraction joint at every 4.00mtr and expansion joint

at interval of 40 mtr applying debonding

strips,bitumen primer,bituminous sealant,12 mm dia

jute rope and curing etc. complete.

82 4.56 Providing and fixing in position FE 500/500D TMT 73243.020 M.T.

bar reinforement including cutting, bending and tying

complete as per detailed drawings. (A) R.C.C. Kerb.

(B) R.C.C. Footpath.(C) R.C.C. Approch slab.(D)

Wearing Coat. (upto 10 ton)

83 48.00 Supplying fixing & joining reinforced concrete heavy 659.990 MTR

duty non pressure pipe carrying indian railway

standard with collars for culverts carring heavy traffic

as per Indian railway standard specification including

setting and joining the pipe in cement mortar 1:2

watering or laying (to level and slope )of I.S.class NP-

3 300mm dia internal

84 23.65 Brick work using common burnt Clay building bricks 4265.940 CUM

having crushing strength not less than 35 kg / sq.cm in

foundation and plinth in Cement mortar 1:5 (1 Cement

: 5 fine sand) (B) Conventional

85 26.70 Providing and laying controlled cement concrete M 5845.800 CUM

250 and curing complete including the cost of

formwork but excluding the cost of reinforcement for

reinforced concrete work in (A) Foundations,Footing

base of columns.

86 20.80 Providing and laying controlled cement concrete M 8124.120 CUM

250 and curing complete including the cost of

formwork but excluding the cost of reinforcement for

reinforced concrete work in (A) Column from Footing

Top to Plinth Beam

87 13.10 Providing and laying controlled cement concrete M- 9528.900 CUM

200 and curing complete including the cost of

formwork with ordinary timber planking so as to give

a rough finish incl. centering shuttering strutting and

propping etc.. but excluding the cost of reinforcement

of R.C.C. work in Columns, Pillars posts and struts

for Ground Floor Level.

88 27.30 Providing and laying controlled cement concrete M- 6275.410 CUM

250 and curing complete including the cost of

formwork with ordinary timber planking so as to give

a rough finish incl. centering shuttering strutting and

propping etc..but excluding the cost of reinforcement

for reiforced concrete work in Beams for Plinth Level

89 7.80 Providing and laying cement concrete 1:3:6 (1- 4152.600 CUM

Cement : 3- Coarse sand : 6- crushed stone aggregates

20 mm nominal size) and curing complete including

cost of formwork in (A) Wall Caps / Coping.

90 76.20 Brick work using common burnt Clay building bricks 4214.330 CUM

having crushing strength not less than 35 kg / sq.cm in

foundation and plinth in Cement mortar 1:6 (1 Cement

: 6 fine sand) (A) Conventional

91 63.00 Brick work using common burnt Clay building bricks 4496.050 CUM

having crushing strength not less than 35 kg / sq.cm in

super structure above plinth level up to floor two level

in Cement mortar 1:6 (1 Cement : 6 fine sand)

(A)conventional - Ground Floor.

92 10230.00 Providing TMT Bar FE 500D steel reinforcement for 77.290 Kg

R.C.C. work including bending, binding and placing

in position complete upto floor two level. For Ground

93 11.00 Providing and fixing M.S. Entry Gate as per detailed 5289.640 SQM

drawing consisting of outer frame made out of 50 x

x5mm M.S. hollow coil pipe @ weight 6.97 kg / Rmt,

25 x 25 x 3 mm m.S. hollow coil pipe for internal

filling @ weight 2.04 kg / Rmt, 6mm thick patti for

internal filling incl. p/f 1.5mm thick m.s. sheet above

the structure to get desired design and applying the

whole structure with two coats of metal primer of

approved quality and three coats of spray painting with

approved colour and pattern oil paint incl. necessary

locking and movement arrangements and fixing the

same structure at site with RCC pillar fixing in

position etc. complete as directed by engineer-in-

charge. ( Weight not less than 34.00 Kg / Sqm )

94 4.30 Providing and fixing Acrylic Signage with Braille 23634.000 SQM

Signs using high-quality, durable acrylic sheets with

precision-cut tactile letters text/icon 4mm and 3mm

inserted and 1mm embossed and Grade 1/2 Braille

dots. 3mm top layers and 2 mm back side layer with

brailles embosed brailles in stailess steel grade 304 or

316 with 0.5 mm brailles embossed on top designed to

enhance accessibility in public and private spaces,

these signs shall be fully customizable in size, color,

font, and language. Ideal for use in hospitals, hotels,

offices, metros, and smart city projects, they feature

UV-printed content, strong adhesives or screw

mounting options, and comply with ADA and

Accessible India Mission (Sugamya Bharat Abhiyan)

guidelines etc. complete as per design / specifications

and guidelines as per entire satisfaction of the

Engineer in charge.

95 3.30 Providing and fixing Stainless Steel (304/316) Tactile 25890.470 SQM

Tiles (300x300x6.5mm) self-adhesive or stem-

mounted Stem: 12mm x 6mm are crafted from

premium SS 304/316 for exceptional durability and

corrosion resistance. Designed to provide anti-slip

guidance and hazard warnings, they are suitable for

high-traffic indoor and outdoor areas ideal for metros,

airports, malls, and public spaces, and comply with

ADA and Accessible India Mission accessibility

standards and as per specificatio and guidelines

complete in all respect to the entinre satisfaction of

Engineer in charge.

96 3.24 Providing and fixing tactile layout plan of required 25553.000 SQM

size as approved design, made of 3.0 mm thick acrylic

non glare base plate and non glare cut out symbols

with Braile on which individual facility points, like

inquiry, reception, restrooms, medical room / first aid,

cafeteria or breakout area, lounge, meeting room,

conference room etc. present the respective floor with

pictograph wherever needed all in tactile raised by

minimum of 1 mm to 2 mm in various colours to

make it legible for seniors, partial vision impaired etc.

All the faciity name should be in Braile, along with

Gujarati, English or Hindi. The entire block of tactile

signs should be mount on wall for easy reading. The

map to be installed at specified locations and installed

at height of 800 mm from ground level complete in all

respect as per Harmonized guideline & satisfaction of

Engineer in charges.

97 5.67 Providing and fixing of acrylic, non-glare, tactile 43068.420 SQM

audio pictorial building layout as per the approved

size, design and make, having 3 mm thick acrylic non

glare base plate of the approved colour and non glare

acrylic cut out symbols raised 3 mm above base plate

and Grade - 2 / Grade - 1 Braile to be intergral with

the sign face and be raised 0.5 mm above base plate.

The map to be installed at the specified location as per

accessibility standards shall be oriented to the position

of the viewer and to be installed at the height of

mm from the finished ground / floor level and using

the necessary hardware specified by the manufacturer

and to be installed complete as per design /

specifications and guidelines as per the entire

satisfaction of the engineer in charge.

98 246.00 Providing and fixing Braille indicator of size 170 mm 940.810 No.

x 35 mm made out of SS 304, matt finish for hand

rails of the approved design and hame have braile dots

raised 0.5 mm above the base plate to be installed at

specific locations as per direction of Engineer in

99 186.00 Providing and fixing conspectus tape 50 mm width on 338.710 MTR

treads of staircase including cutting, pasting etc. as per

harmonised guidelines complete in all respects on the

entier satisfaction of engineer in charge.

100 8.64 Providing and fixing 15 mm thick 300 mm x 300 mm 1935.170 SQM

Tactile warning tiles (Attention Tiles i.e. Tectile

Warning Surface Indiactor (TWSI) of Johnsan Endura

Tac Botton Yellow plus or quivalent make in flooring

laid on 20 mm tihck cement mortar 1:6 ( 1 Cement :

Coarse sand) on new surface and jointed with cement

slurry including finished with flush pointing &

cleaning the surface for all floors as per detailed

drawing etc. completed as directed by Architect or

Engineer in charge. These tiles shall be Anti Skid,

chemical resistant, Fade Proof, Frost - Heat &

Weather proof, High Flexural Strength, Highly

durable, Stain resistance. All Tectile warning tiles

meet the specific size and dimension standard as per

required by ISO / FDIS

101 204.00 Providing and Fixing Corner guard L shape Heavy- 478.530 No.

duty corner protectors designed to protect corners

from damage versatile protection for warehouses,

offices, overhead door frames, and tracks or any 90°

corner. Long-lasting & Cost-efficient Rubber Parking

Safety Products shall be ideally suited for use in areas

like car parks, warehouses, and other applications

including highly visible yellow reflective strips that

support Highlighting the areas, superior grade rubber

material finish for reliable usage easy to install

through the support of bolts and screws, made from

high-impact virgin rubbert as per detailed drawing etc.

Complete as per directed by Architect ofr Engineer in

102 4988.00 Providing and fixing Directional TGSIs (with linear 273.880 No.

bars) Self adhesive (3M VHB Tape / 3 Stemps )

SOLID SS Tactile STRIP 105 SLD of size 280 x 35 x

4.5 mm to iprovide guidance to direct pedestrians

along safe paths that is designed as per accessibility

standards and having Anti-skid Linear Pattern

suitable for Stone / Maasonary / Timber / Vitrified /

Glass / Metal surface including fixing by Peel & Paste

method complete as per design / specifications and

guidelines as per entire satisfaction of the Engineer in

103 14400.00 Providing and fixing Self adhesive (3M VHB Tape / 1 55.400 No.

Stemps ) Warning TGSIs (with raised dotes) SOLID

SS Tactile STUD 106 SLD of size 35 x 4.5 mm

designed as per accessibility standards to indicate

caution zones like crossings etc and having Anti-skid

raised dot Pattern suitable for Stone / Maasonary /

Timber / Vitrified / Glass / Metal surface including

fixing by Peel & Paste method complete as per design

/ specifications and guidelines as per entire

satisfaction of the Engineer in charge.

104 3.00 Providing and fixing SS Straight GRAB BAR of size 2404.300 No.

600 x 32 mm designed as per accessibility standards

for WC area including fixing using SS Screw etc.

complete as per design / specifications and guidelines

as per entire satisfaction of the Engineer in charge.

105 3.00 Providing and fixing SS-304 SWING GRAB BAR of 5017.680 No.

size 750 x 215 x 300 x 100 mm designed as per

accessibility standards for WC area including fixing

using SS Screw etc. complete as per design /

specifications and guidelines as per entire satisfaction

of the Engineer in charge.

106 3.00 Providing and fixing SS-304 U-Shaped GRAB BAR 3240.580 No.

of size 800 x 215 mm designed as per accessibility

standards for WC area including fixing using SS

Screw etc. complete as per design / specifications and

guidelines as per entire satisfaction of the Engineer in

107 3.00 Providing and fixing SS-304 L-Shaped GRAB BAR 3449.650 No.

of size 600 x 600 mm designed as per accessibility

standards for WC area including fixing using SS

Screw etc. complete as per design / specifications and

guidelines as per entire satisfaction of the Engineer in

108 5.00 Providing and fixing SS-304 URINAL Safety GRAB 4495.000 No.

BAR of size 600 x 32 mm designed as per

accessibility standards for Urinal area including fixing

using SS Screw etc. complete as per design /

specifications and guidelines as per entire satisfaction

of the Engineer in charge.

109 146.00 Replacing Old by Point wiring for Light / Bell with 449.450 Pt

2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length , in

below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth continuity

of following type, erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules erected on

/ in wall / ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as

directed.(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete Light PointCat. III

110 64.00 Replacing Old by Point wiring for FAN with 2-1.5 629.230 Pt.

sq.mm & earth wire of 1.5 sq.mm (Green) both are of

.ISI marked 1.1 KV Grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length, in below type

of pipe erected with 6A Modular type switch and

hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of

following type erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules erected on

/ in wall / ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed. (f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III

111A 8.00 Replacing Old by Point wiring for Individual Plug 473.690 Pt.

with & earth wire of 1.5 sq.mm (Green) both are of

ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length, in below type

of pipe erected complete with Modular type switch &

5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected

on / in wall / ceiling as per pipe erected with following

type of accessories. [I] For 6A Plug and 6 a switch

with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board (f) with medium class

Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete cat-III

111B 12.00 [III] For 16A Plug and 16 amp switch with 2-4 sq.mm 789.820 Pt.

Cu. Wire with 2.5 sq.mm ( green) earthing wire from

mcb d b board.(a) with medium class Rigid PVC pipe

and accessories erected flushed on wall/ceiling

complete Cat III

112 10.00 Replacing Old by Point wiring for on board Looped 241.390 Pt.

Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured /

metallic/white front plate modules erected on / in

wall / ceiling with following type accessories Cat. III

113 100.00 Replacing Old by Providing following type of 24.240 Ea.

Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected with necessary connections as per

site situation directed by Engineer In charge. (7) Blank

Plate Single Cat.III

114 880.00 Replacing Old by providing and erecting Mains with 78.780 Mtr.

1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of

pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth

continuity of following size (A) With medium class

Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm

115 200.00 Replacing Old by providing and erecting Mains with 140.390 Mtr.

1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of

pipe to be erected in / on wall / ceiling with 2.5 sq.

mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following

size (A) with medium class Rigid PVC pipe and

accessories (b) 2 wire 6 sq. mm

116 157.00 Supplying and erecting Flexible PVC insulated multi 44.440 Mtr.

strand multi core 1.1 kv grade ISI marked copper

wires of following size to be erected as directed. e)

1.50 Sq.mm 3 core round PVC sheathed

117 108.00 Replacing Old by Supplying and erecting LED indoor 373.700 Ea.

fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 160V to

270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Tube Light with

integral driver (iv) 22-24 Watts, Surge - 2KV,IP-20,

conventional 4 feet Cat-lll

118 40.00 Supplying and erecting led lamps with following 112.110 Ea.

wattage capacity of 220 to 240 voltage, minimum

15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable

for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED

Lamps integral type, with PC diffuser suitable LAMP

holder (ii) 5 to 8 watts cat-III

119A 18.00 Replacing Old by Supplying and erecting LED street 4997.480 Ea.

light / Flood light fittings with High power White

LEDs wattage of 3 Watt and above assembled on

single MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat

sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed

to 270 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Street Light (IP-65),

Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. (ii)

above 48 to 60 Watts (Old 4)

119B 10.00 (B) Flood Light (IP-65), Surge protection -4KV 7266.950 Ea.

integral and ,Light must have 440VAC line supply

with over-voltage protection. (iv) above 90 to

120 2.00 Replacing Old and u/s by providing and erecting 6173.120 Ea.

Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 25 KA. at

415 V,having normal current rating up to 25 A to

100A. with Fixed thermal & magnetic release suitable

to work on A.C. supply 50 c/s. with all internal

connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing. ICS=100% of

ICU only Cat III

121 2.00 Replacing Old and u/s by Supplying and erecting triple 1961.420 Rmt

pole & neutral 440V / 500V panel mounting Copper

Busbars with four equal Nos. of electrolyte bus having

current density not more than 1.6 Amp. / sq.mm

(Rated current / cross section area) duly wrapped with

colour insulating tape for phase sequence of following

current carrying capacity, erected with necessary bus

bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary

connections.(A) Suitable for 100 Amp. Capacity

122 44.00 Replacing Old by providing and erecting Miniature 112.110 Ea.

circuit breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark Cat.III

123 10.00 Replacing Old by Providing & erecting 240 V MCB 295.930 Ea.

double pole switch for lighting Load (B Curve) having

10 KA breaking capacity & confirms to IS : 8828 in

existing box having following capacity (B) 40 Amp.

124 6.00 Supplying KITKAT pattern porcelain cut-out fuse 420.160 Ea.

with base of following current capacity erected on

existing block board. (vi) 200 A. 500 V.

125 11.00 Replacing Old by Providing & erecting 415 V MCB 737.300 Ea.

Four Pole for Motor & Inductive Load (C Curve)

having 10KA breaking capacity & confirms to IS

:8828 in existing box having following capacity ©

126 4.00 Replacing Old by Providing and erecting Sheet Steel 1492.780 Ea.

powder coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate nos.

of MCBs.(The DBs should be used of same company

of MCB to be used) suitable for(A) single phase

incoming and horizontal single phase outgoing (b)

sheet steel double door (IP-43) (iv)12 way

127 4.00 providing and erecting Approved make RCCBs 2235.130 Ea.

conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on single phase

V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not incorporate

any electronic component. for following Max. rating

erected as directed (ii) 40Amps. DP Cat. III

128 2.00 Providing and erecting metallic vitrified danger notice 69.690 Ea.

board as per language suggested by engineer incharge

for MEDIUM VOLTAGE installation to be erected as

129 2.00 Providing and erecting HOT deep Galvanised iron 77.770 Kg.

strip wire 8 to 16 SWG.

130 2.00 Supplying & erecting earth pit of minimum bore 4591.460 Ea.

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia

of 12mm with constant ohmic value surrounded by

highly conductive compound with high charge

dissipation suitable for following type of applications

with chamber and heavy duty cover. (A)(approved

make OEM has to submit test certificate including

value of earth resistance of installation duly stamped

and signed by agency and officer Incharge has to

ensure the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B)

Inner chemical (CCM Compound)- Resistivity:-

ohm / meter testing as per IEC 62561-2017, Voltage

drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound

should be capable to retain moisture for long time

Necessary test report must be submitted by Agency.

(a) For Electrical Installation up to 440V in normal

Length of pipe - 1 Mtr

131 3.00 Providing & erecting weather proof, dust & vermin 10468.650 smt

proof, floor mounted front operated indoor type

cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge

made from 14 SWG thick CRC M.S. sheet for outer

body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories

supporting angles/ flats channel including cutting,

bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of

inter connecting PVC copper wire / copper-aluminium

strips, rubber grommets, rib, bakelite control

fuses/MCB for measuring instruments, earth bus &

earth bolts, foundation flange - bolts-base Plates,

sufficient nos. of hinged doors, handles with locking

arrangement and rubber gasket,heavy duty end

terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be

painted with epoxy powder coating. (The rates

excludes the cost of switchgears, bus bars, inter

connecting mains & Copper Aluminium strips,

132 260.00 meters,

ProvidingFuses etc. The

, erecting dimension the

, fabricating shallM.S.

structure as 77.770 Kg.

per requirement on site incorporating proper size of

M.S. angles,square,round, flats, bars, channels,

sections complete with cutting, welding, grinding &

finishing duly painted with one coat of red oxide with

erection on site as per direction of engineer in charge

with necessary grouting, cementing, plastering &

finishing complete.

133 2.00 Supplying and erecting approved make panel 1275.630 Ea.

mounting type Digital Voltmeter having 3 digits LED

display, 0 to 750 AC Volts range erected on existing

panel board with all connection, wiring etc .with

manufacturers calibration certificate.

134 2.00 Supplying and erecting approved make panel 1558.430 Ea.

mounting type Digital Ammeter having 3 digits LED

display, external CT operated, calibrated for 0 to

Amps suitable to operate on 500 Volt AC , erected on

existing panel board with all connection, wiring etc

.with manufacturers calibration certificate.

135 4.00 Supplying and erecting Ammeter / Voltmeter selector 317.140 Ea.

switch for 3 phase AC Supply 500 V on existing panel

board with necessary connections.

136 5.00 Providing & erecting L.T. Current Transformer with 274.720 Ea.

bar primary 50/5 to 1000/5 ratio 15 VA burden erected

in existing CRCA box duly secured with insulating

materials connected to the meter

137 6.00 Supplying and erecting approved make suitable panel 43.430 Ea.

indicator LED type lamp, lens cover, complete erected

with necessary connections.

138A 6.00 Replacing Oldby providing and erecting Mains with 11.110 Mtr

ISI marked, 1.5KV grade electrolyte multi stranded,

annealed copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor

starters & control wiring) with required size of copper

lugs, nuts and bolts if required.(a) One wire 1.00 sq.

138B 48.00 mmOne wire 6.00 sq. mm

138C 12.00 (g) One wire 16.00 sq. mm 135.340 Mtr

139 770.00 Replacing Old by Providing and erecting XLPE 124.230 mtr.

(IS:7098)(I)-88 ISI armoured cable multistrand / Solid

Aluminium conductor for 1.1 KV. to be laid on wall

with necessary clamps or in existing trench / pipe of

following size of cables(B) 4 core 6 Sq. mm

140 480.00 Making trench in soft soil of suitable width of 90 cm 46.460 Mtr.

deep for laying cable or locating the fault all over the

run and back filling the same and making the surface

as normal ground.

141 490.00 Providing & laying approved make Double walled 62.620 Mtr.

corrugated pipes (DWC) of polyethylene(conforming

to IS 14930 II )with necessary connecting accessories

of same material at required depth in existing trench

for laying of cable. below ground / road surface for

enclosing cable (A)50 mm Outer dia

142 4.00 Providing and, fixing heavy duty flange type brass 38.380 Ea.

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables. (B)

to 4 core 6 Sq. mm

143 2.00 Providing and, fixing heavy duty flange type brass 75.750 Ea.

double compression type cable gland with rubber

ring for PVC insulated armoured cable complete with

out going tails, insulating tape etc for following size of

cables. (B) 3 & 1/2 core 35/50 Sq. mm

144 16.00 Solder less crimping type Aluminium lugs conforming 6.060 Ea.

to IS suitable for cable of following size evenly

crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. (A) 1.5/ 2.5/4/6 Sq.mm

145 60.00 Solder less crimping type Copper lugs conforming to 8.080 Ea.

IS suitable for cable of following size evenly crimped

with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an

approved manner. (A) 1.5/2.5 to 6 Sq.mm

146 64.00 Providing & erecting Approved make Power Saving 1948.290 Ea.

50 Watt Ceiling Fan with double ball bearing ISI mark

with Condenser 230 volt A.C. 50 Hz 1200 mm

sweep complete having 3blades with aluminium

blades with , canopy & 30 cm. down rod erected with

earthing.(Make shall be approved by Engineer in

147 64.00 Supplying and erecting 19 / 20 mm. nominal bore 108.070 Mtr.

Medium Class M.S. Pipe down rod erected duly

painted for fan complete with proper insulation

without leakage and earthing.

148 64.00 Supplying & erecting fan hook box of 10 mm M.S. 108.070 Ea.

round bar bounded to the RCC bars up to 50mm

length each side and pierced through a 16 Gauge M.S.

box / Heavy Duty PVC box complete erected

concealed in Ceiling with necessary finishing.

149 64.00 Providing 2.5mm.thick laminated acrylic sheet to 18.180 Ea.

cover the fan hook or Fan box.

150 6.00 Supplying & erecting approved make low noise 1703.870 Ea

decorative exhaust fan having square frame ABS body

with inbuilt lowers & square frame. 200mm with

151 6.00 Providing recess in wall or window frame suitable for 189.880 Ea.

erection of Exhaust fan complete with plastering and

colour washing to match the colour of the wall or

window complete with expanded metal in order to

render the fitting in accessible and the room water-

152 12.00 Supplying and erecting B class Galvanized iron pipe 215.130 Mtr

having smooth finished bore of the pipe on both ends

erected nuts and bolts along the pole / wall shaping

the pipe as per site requirement. Pipe dia as

following.(B) 32 mm dia

153 7.00 Supplying and erecting approved make Octagonal pole 8192.110 Ea.

made from HR sheet steel. The pole should be made

as per IS. and shall be coated with hot dip galvanizing

as per IS 2629/2633/4759, suitable suspend local wind

speed with integral Junction box consist of terminal

plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud

type terminal and arrangement for cable termination

to be erected With Suitable foundation (Included) as

per details given by manufacturer considering site

requirement.(D) 6 Mtr. Long 70 mm Top X 135 mm

bottom dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-M20 Bolts and

600mm long with necessary G.I. J Bolts .Approx Pole

154 7.00 Providing and erecting street light pole bracket 614.080 Ea.

comprising main B Class GI pipe of 4.2 cm/require

outside dia. complete with suitable B Class G.I sleeve

tubing of approx. 45cms.length and suitable for

mm / 80mm. / require size pole top having sufficient

fasteners for fixing the brackets and having spread of

mtr. length with suitable rise as per site condition &

suitable welded stiffener reducer and nipple with

check nut complete painted with one coat of Red

oxide / PU base primer and two coats of Aluminium /

PU paint. paint with following nos of arms.[A] Single

Arm bracket 1 Mtr

155 1.00 Supplying & erecting IP 55 grade following size 1884.660 Nos

section pillar fabricated from joint less M.S. Sheet

with angle iron legs made from jointless M.S. Angle

with cable clamps to be buried in ground to have

appropriate erection to work uniform until erected

with cement concrete foundation and 45 cm high

bricks work finishing with plaster etc. hinged double

door internally supported on both side, with internal

and outside looking arrangement with look and keys in

duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos.

one is welded and other with nut and bolt for erecting

Bakelite sheet. Painting the Section Pillar inside and

out side with three tank powder coated paint. section

pillar roof should be without joint with water leakage

proof & tested as per IP 55 test & followed by IS

of 1962 (C) 60 X 30 X 45 cm section pillar fabricated

from 16 Gauge MS Sheet with angle iron legs 45 cm

long made from 35 X 35 X 5 mm thick MS angle.

156 0.50 Supplying and erecting HYLAM sheet on existing 385.820 sq.mtr

angle iron frame.for following thickness (A) 2mm

157 2.00 Supplying & erecting approved make Digital time 3168.370 Nos

switch having lithium cell 6 years operative and

operate battery backup 1 channel day clock with

memory programme, suitable to operate on 240V +

5%, 16A with, floating contacts Minimum switching

setup time 1 minimum & LCD display. Also

comprised permanent ON/OFF switching.

Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover erected as

required with necessary connection erected as

158 1.00 Supplying & erecting power contactor ,AC3 duty for 2782.550 Ea.

time switch complete erected as per direction Cat III

(D) 4 pole 440V 40 Amp.

159 1.00 Providing and erecting water cooler having storage 41342.330 Ea.

capacity 80Ltr. & cooling capacity 40 Ltr.per hour @

an ambient temp of 45˚ C. The outlet temp. of the

water should drop by 15˚ C within a hour, The water

cooler should be comprising of hermetically sealed

compressor, fan motor, condensing unit, water tank

surrounded by evaporating coil, thermostats, relay etc.

complete with necessary inlet & outlet connection.

The body of water cooler will be made from Stainless

160 1.00 Supplying & erecting 5 stage single reverse osmosis 24394.530 Ea.

water purification system with M.S. powder coated

frame, prefilter housing with 'O' ring presediment filter

GAC filter, carbon filter suitable buster DC pump

capacity 80 psi, mention with 40 psi inline type post

carbon filter auto low & high pressure switches with

following size of storage tank & LPH capacity &

erected as directed. [C] 50 Ltr / Hr with 150 psi 2 nos

161 1.00 Supplying & erecting power contactor ,AC3 duty for 1883.650 Ea.

time switch complete erected as per direction Cat III

(B) 2 pole 250V 32 Amp.

" I / We Am / Are willing to carry out the work @ __________ % @

(should be written in Figures and Words) of the estimated rates mentioned above, Amount of

My / Our tender works out as under :-

Estimated Amount Put to tender. Estimated Amount Put to tender.

In Words In Words

1 All work shall be carried out as per P.W.D. Hand Book and other specification of the Division or as directed.

2 Rates quoted include clearance of site (prior commencement of work and at its close) in all respects and hold good for work under all conditions, site

moisture, weather etc.

3 The contractor shall exhibit the details of work, tender amount, specifications as per Govt. circular No. BDG / 3277 / 1657 Dated. 26-4-1978 and G.R.

No. TNC/ 1090-24 C, Dated. 18-11-91 as directed by the Engineer-in-charge on the work site for which contractor

4 Testing of materials as per statement attached with the specifications. The materials shall be tested in G.E.R.I. Bill for testing shall be paid by the

department and 1 % (One percentage) of amount put to tender after deduction the cost of cement & steel mentioned in clause 59(a)

5 In R.C.C. item where there is change of grade mix or change as per actual mix design the difference of of cement consumption shall be added / deducted

from rate of original item at the rate mentioned in tender.

6 For earthquake resistance provision the works shall be carried cut as per the instruction of Engineer in charge.

7 The other conditions of Schedule "B" will remain unchanged.

8 Labor Cess 1 % (One Percent) of Bill Amount shall be recovered from contractor of building or other construction works. (Resolution of Employment

and condition Act 1996)

9 An amount of Rs. 1,26,812.79 ( Rupees One Lakh Twenty Six Thousand Eight Hundred Twelve & Seventy Nine Paise only ) will be deducted from the

1st R.A. Bill as Credits of dismentlled materials ( i.e. existign building ). Neither extra payment will be paid seperately for dismentalling the existing

building nor extra time will be granted for the same.

Signature of Contractor Executive Engineer