REPAIRS TO JOINERY , FLOORING , PLASTERING ROOFS, AND PETTY REPAIRS FOR MD / OTM ACCN OF ICGS GANDHINAGAR UNDER GE (AF) CHILODA

Amount

Resecuring or easing and adjusting without taking down Shutters of any description n exc 1 sqm each complete all as specified

All as per item No- 01 above but exc 1 sq. m and n exc 2 sq. m each complete all as specified

Taking down shutters of any description n exc 1 sqm each and refixing in same opening after easing, adjusting , repairing/ replacing hinges/ builders hardware etc complete all as specified

All as per item No- 03 above but exc 1 sq. m and n exc 2 sq. m each complete all as specified

M&L for Repairs to 1st class hard wood Beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc.. and removing/ taking down old beads complete all as specified

S&F in repairs Aluminium anodised, barrel tower bolts of extruded section and fixed of 150 mm long complete all as specified

S&F in repairs Aluminium anodised, barrel tower bolts of extruded section and fixed of 200 mm long complete all as specified

S&F in repairs Aluminium alloy, anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified

All as per item No- 8 but fixing only above item complete all as specified

S&F in repairs Butt hinges 100 mm long , medium weight, cold rolled mild steel, and fixed complete all as specified

S&F in repairs Butt hinges100 mm long , extruded aluminium alloy with gal vanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified

S & F in repairs Continuous (piano) hinges 30 mm width of flap when opened, mild steel, bright finish or electrogalvanised complete all as specified

S&F in repairs 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified

S&F in repairs extruded aluminium alloy handles150 mm long , fabricated type, anodised complete all as specified

S&F in repairs Casement stays, size 300mm, with hinged joint and two plates, with studs complete all as specified

S&F in repairs Hasp and staple 125 mm , safety type, Aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified

S&F in repairs brass CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified

S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified

S&F in repairs Door closer of aluminium dia cast body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified

All as per item No- 19 but fixing only above items complete all as specified

S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete including making good the floor surfaces after installation complete all as specified

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified

All as per item No- 23 from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified

S&F in 4 mm thick Sheet glass, ordinary quality and glazing with wooden beads/ oil putty in square n exc 0.5 sq. m in each pane complete all as specified

All as per item No- 25 but if sheet glass is ground or obscured or frosted, on one side complete all as specified

Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified

Taking up or down steel /UPVC water tubing and connections,15 mm bore complete all as specified

Taking up or down steel /UPVC water tubing and connections,20 mm bore complete all as specified

Taking up or down steel /UPVC water tubing and connections,25-32 mm bore complete all as specified

Refixing/ fixing only old steel tubing and connections 15 mm bore in new or old position (Walls, ceiling, floors, etc.) complete all as specified

Refixing/ fixing only old steel tubing and connections 20 mm bore in new or old position (Walls, ceiling, floors, etc.) complete all as specified

Refixing/ fixing only old steel tubing and connections 25-32 mm bore in new or old position (Walls, ceiling, floors, etc.) complete all as specified

S&F 15 mm water tubes, 'Meduim grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified

S&F in repairs 15 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified

S&F 20 mm water tubes, 'Meduim grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified

S&F in repairs 20 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified

S&F 25 mm water tubes, 'Meduim grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified

S&F in repairs 25 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified

Cutting, chasing pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves ,lintels etc and cutting chase for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth in brick wall complete all as specified and directed

S&F in repairs 40 mm bore High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified

Disconnecting existing tanks exc 250 and n. exc 500 ltr , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified. Note :- Bleeching powder to be spread in the bottom of tank before fixing / installing in position.

Disconnecting existing tanks exc 500 and n. exc 1000 ltr , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified. Note :- Bleeching powder to be spread in the bottom of tank before fixing / installing in position.

Disconnecting existing tanks exc 1000 and n. exc 2000 ltr (including UG sumps) , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified. Note :- Bleeching powder to be spread in the bottom of tank before fixing / installing in position.

Disconnecting existing tanks exc 2000 and n. exc 5000 ltr including UG Sumps etc , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified. Note :- Bleeching powder to be spread in the bottom of tank before fixing / installing in position.

S&F in repairs 250 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including Dismantling of existing water tanks complete all as specified

S&F in repairs 500 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including Dismantling of existing water tanks complete all as specified

S&F in repairs 1000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including Dismantling of existing water tanks complete all as specified

S&F 20 Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified

S&F 25 Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) complete all as specified

S&F in repairs fancy type Stop valves/ angle cock, cast copper alloy, screwed down, high pressure, with capstan handle, screwed both ends for iron pipe or for unions and fixed complete all as specified

S&F in repairs fancy type Bib taps, cast copper alloy with capstan handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified

S&F in repairs fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified

S&F in repairs Gun-metal, globe or gate valves 15 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified

S&F in repairs Gun-metal, globe or gate valves 20 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified

S&F in repairs Gun-metal, globe or gate valves 25mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified

S&F in repairs 15 Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms) complete all as specified

S&F in repairs 20 Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified

S&F in repairs 25 Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) complete all as specified

S&F in repairs 32 mm bore waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm45gms) complete all as specified

S&F in repairs 40 mm bore waste coupling of PTMT (half or full threaded) . (Minimum weight 40mm-60 gms) complete all as specified

All as per item No-61 but suitable for urinals, (Minimum weight 32mm-45gms complete all as specified

S&F in repairs Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified

S&F in repairs Grating round 140 mm size of PTMT. (Minimum weight 50gms) complete all as specified

S&F in repairs Grating square 150 mm size of PTMT (Minimum weight 100gms) complete all as specified

All as per item No-65 but with waste hole of PTMT. (Minimum weight 100gms)

S&F in repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified

S&F in repairs Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms complete all as specified

S&F in repairs PVC connections 15mm size with PTMT nuts of length 375mm complete all as specified

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified

S&F in repairs Stack clamps for 100 mm dia pipes , out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified

SS&F in repairs tack clamps for 75 mm dia pipes , out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified

S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in floors/ trenches complete all as specified

S&F in repairs 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified

S&F in repairs 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified

S&F in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore dia of outlet of pipe complete all as specified

S&F in repairs PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement and making good of disturbing gound with PCC 1:2:4 complete all as specified

S&F looking mirror of size 450x600 with aluminium frame mounted on 6mm ply confirming to IS, with 2 Nos of hanging hooks fixed in repairs complete all as specified

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, infloors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as directed

M&L for glazed ceramic coloured tiles 300x200x7mm thick on vertical surfaces such as dados, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick backing coat in CM 1:4 complete all as specified

M&L for glazed ceramic coloured tiles 350x250x7mm/450x350x7mm thick on vertical surfaces such as skirting/ dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:4 complete all as specified

M&L for coloured vitrified tiles (Light shade) 10 mm thick ( ( square/rectangular) polished, area of each tiles not exceeding 0.36 sqm over and including 15 mm thick screed bed or bedding layer in CM 1:6 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality as specified and as directed

M&L for coloured vitrified tiles (Light shade) 10 mm thick ( ( square/rectangular) polished, area of each tiles exceeding 0.36 sqm and not exceeding 0.42 sqm over and including 15 mm thick screed bed or bedding layer in CM 1:6 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality as specified and as directed

All as per item No. 84 & 85 above , but on vertical surfaces/ skirting over and including 10 mm thick backing coat in CM 1:4 complete all as specified

Demolition of stone slabs and tiles of any description, laid bedded and pointed in any mortar complete all as specified and as directed

M&L for Machine cut kota stone slab flooring 20-25 mm thick over and including 15 mm thick cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as in window cill complete

M&L for 20 mm thick granite slab/ tiles (of any type and colour) machine cut type, laid in floor, platforms and pillars etc , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding/rounding on edges if required and polishing over and including 15 mm thick screed bed in CM 1:6 complete all as specified

Taking down chowkats or frame with shutters (without taking off shutters from frames ) size n. exceeding 1.5 Sqm each complete all as specified and as directed

Taking down chowkats or frame with shutters (without taking off shutters from frames ) size exceeding 1.5 Sqm but not exceeding 4.00 sqm each complete all as specified and as directed

S&F Framed work as in doors / gates of angle or other section etc door to be prepared for hanging or sliding on hinges or rail etc complete all as specified

Taking down of shutters of any description exc 1 sqm but n. exc 2 sqm each complete all as specified

S&F 30 mm thick Flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified

M&L for glazed and skeleton shutters 30 mm thick 2nd class hard wood open rebated and prepared to receive glass divided into squares rebated sash bars any numbers, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass, sizes of memebres as specified in SSR Part-I section 8 clause 8.20 (a) (glass windows etc) complete all as specified

M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions all as directed complete all as specified

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails , MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and colour PVC sheet for top rail, lock rail, and bottom rail on either side and as gap insert for top rail and bottom rail . Panelling of prelam PVC sheet used instead of plain colour PVC sheet. Stiles and rails feathered at edges the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement , supplying and fixing in the frame at site as per specification and drawing .

S&F Butt hinges 100 mm long , Heavy weight, cold rolled mild steel, and fixed complete all as specified

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed of 150 mm long complete all specified

S&F Extruded aluminium alloy handles150 mm long , fabricated type, anodised all as specified

S&F Aluminium alloy, anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F for 2nd class hardwood plain, solid,straight chowkats of CBs and frames,wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified

M&L for Medium density fibre board interior grade 18-20 mm thick solid construction type, fixed in repairs in CBs doors on timber frame work with screws /nails complete all as specified.

M&L for 1.5 mm thick Decorative laminate type -1, both sides of boards of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified

S&F continuous (Piano ) Hinges 30 mm width of flaps, mild steel bright finish or elecrogalvanised complete all as specified

S&F in repairs Pre-laminated particle board 9 mm thickness,exterior grade prelaminated both sidewith decorative choice lamination fixed to Aluminium frame work in doors/ partitions with beadings/ cleats etc complete all as specified

S&F in repairs Pre-laminated particle board 12 mm thickness,exterior grade prelaminated both side with decorative choice lamination fixed to Aluminium frame work in doors/ partitions/ CBs shelves etc with beadings/ cleats etc complete all as specified

S&F aluminium powder coated (Three track) sliding windows with frame of size 92x31.75x1.50mm and shutters of size 42 x 18x 1.50 mm with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete and stainless steel wire mesh 0.36 mm nominal dia of wire with 1.40 mm average width of aperture and fixed with stainless steel wire staples and fixing 5 mm thick glass with necessary rubber beading, gasket etc all as specified and as directed by Engr-in-charge . Note - Glazing/ wire mesh shall be included in the unit rate.

S&F aluminium windows ( Double track) / ventilator powder coated of section 85.00mm x 31.75 mm x 1.50 mm thick shutter of section 19 x 40 x 1.5 mm with rubber gasket beading and locking arrangement etc complete all as specified and as directed. Note - Glazing/ wire mesh shall be included in the unit rate.

S&F aluminium powder coated grill 6 mm thick fixed to walls with and including 'H' of 'F' aluminium channel of size 38 mm x 12 mm x 1.50 mm complete .

S&F in repairs vertical vanishing blind 75 mm wide strips type etc. with all its accessories fixed to wall with screws complete all as specified and directed

S&F in repairs vertical vanishing blind printed/ roller type etc. with all its accessories fixed to wall with screws complete all as specified and directed

S&F in repairs PVC wall panelling plastic section for wall panelling of size 250 mm x 6 mm fixed to wall complete all as specified and directed

S&F 5 mm thick PVC sheet fillets of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified

Cutting holes in brick walls built in cement mortar for inserting/ taking out holdfasts/ pipes etc and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required ( depth of embedded portion of holdfasts/ pipes/ lugs exc half brick but n. exc one brick and measured from the face of walls) complete all as specified

S&F in repair Vitrious china wash down water closet pan (padestal pattern ) white including connection to outgoing pipes and to flushing pipe including PVC white seat cover complete all as specified

S&F in repairs, vitreous china wash basin white flat back size 550x400mm with brackets including cutting for and pinning in ends of brackets or erecting stand including waste coupling CP brass 32mm dia with long screwed shanks & fly nuts & PVC waste pipe & CP pillar tap complete all as specified

S & F in repairs, vitreous china squatting pan, 'orissa' pattern of size 580x440mm white, with integral foot rests including concrete bedding & connection to CI 'P' trap, 100mm, complete all as specified

Demolition of brick work or stone masonry built in cement mortar including pillar etc. complete all as specified

M&L for brickwork with FLY ASH bricks straight or curved on plan exc. 6m mean radius built in CM 1:6 complete all as specified

M&L Brick work with Fly ash Bricks straight or curved on plan to any radius in half brick thick walls built in cm 1:4 complete all as specified

Taking down plastering in cement mortar on brick or stone wall/ ceilings etc including racking out joints hacking for key scrubbing down with water etc.complete all as specified

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all asspecified

M&L for rendering 15mm thick on fair faces of brick work in CM 1:4 finished even and smooth without using extra cement complete all as specified

M&L for rendering 20mm thick in two layers on fair faces of brick work, chajja, facia,slabs etc in CM 1:3 finished even and smooth without using extra cement complete all as specified

Ditto but 10 mm thick rendering on ceiling surfaces in CM 1:3 complete all as specified

M&L for applying two coats of OBD on newly plastered surfaces over a coat of primer over a coats of wall care putty including preparing the new wall surfaces complete all as directed

M&L for Preparation of newly plastered surfaces of ceiling and and applying Two coat of oil emulsion distemper (OBD) over a coat of wall care putty including preparation of new surfaces complete all as specified

M&L for preparation of new surfaces of wall and applying two coat of exterior emulsion paint over a coat of primer complete all as specified and directed

M&L for Preparation of old decorated surfaces of Ceiling spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and applying one coat of distemper oil emulsion (OBD) on ceiling surfaces complete all as specified and directed

M&L for Preparation of old decorated surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and applying one coat of oil emulsion distemper (OBD) complete all as specified

M&L for preparation of old surfaces of wall and applying one coat of exterior emulsion paint complete all as specified and directed

S&F MS flat iron as in hold fasts and similar articles confirming to Fe- 310-0 complete all as specified

M&L for PCC 1:2:4 type B-1 using 20 mm graded aggregate for bed block etc including necessary form work complete all as specified

S&F 25mm dia Curtain /Drapery rod, anodised aluminium alloy with ornamental brackets 02 Nos for each doors/windows etc.complete all as specified

S&F bright finished coloured aluminium anodised alloy ornamental finish type brackets/ knobs for 20/25 mm dia curtains / drapery rod complete all as specified

S&F in repairs for low density polythelyne (flexible) pipes (LDPE) of pressure rating 6kgf/cm2 fixed complete to wall or in floors etc. as in outlet pipe for WHB etc. 32mm bore complete all as specified

M&L for 2 coats of synthetic enamel paint over a coat of primer including preparation of new wooden surface of any description over 10 cm width and girth complete all as directed

M&L for 2 coats of synthetic enamel paint over a coat of Red oxide primer including preparation of new steel surface of any description over 10 cm width and girth complete all as directed

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick, including removing rubbish off the premises complete all as specified

M&L for 75mm thick PCC (1:3:6) type C1 using 20 mm graded aggregate as in plinth protection/ Paths etc complete all as specified

M&L for 75mm thick PCC 1:4:8 type D2- using 40mm graded stone aggregate as in sub base etc. complete all as directed

M&L for Rubber moulded Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick , set , jointed and pointed in neat cement slurry over and including 15 mm thick screed bed or bedding layers in CM 1:6 for laying floor finishes in floors , path / hard standing etc with grey cement and pigment (Coloured Tiles) complete all as specified and as directed

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified

M&L for Glossy finished pre-polished coloured machine pressed precast concrete interlocking paver block any shpe and size confirming to IS 15658-2006 of 60 mm thickness , M-35 grade with grey cement and pigments complete all as specified

Providing cement concrete rounded or chamfered on edges of paver blocks / chequered tiles or sides of path / hardstanding ,roof kerbing and mud stops etc. type B-1, 1:3:6 (20 mm graded crushed stone aggregate) complete all as specified and as directed

S&F in repairs Stainless steel sinks made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers& waste pipe, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm X 420mm with bowl size 410mm X 330mm X 160mm complete all as specified

S&F in repairs Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, connecting union overall size 915mm X 460mm with bowl size 410mm X 330mm X 160mm complete all as specified

S&F in repair Vitrious china wash down water closet pan (extended type ) of size 655x365x755mm (wall hung pattern type ) white including connection to outgoing pipes and to flushing pipe including seat cover and twin fitting type flushing cistern complete all as specified. Make- CERA. Cat part No- S1031103 (P Trap) Campbell.

S&F in repair Vitrious china wash down water closet pan (one piece type) of size 660x360x760mm (Padestal pattern type ) white including connection to outgoing pipes and to flushing pipe including seat cover and twin flush fittings complete all as specified.

S&F in repairs, vitreous china wash basin white table top/counter type of size 560x400mm with brackets including cutting for and pinning in ends of brackets or erecting stand including waste coupling complete all as specified

S&F in repairs CP Pillar cock 15 mm with swan neck spout (left/right) and aerator complete with all fittings and as specified .

S&F in repairs CP Pillar cock 15 mm with aerator complete with all fittings and as specified .

S&F in repairs CP Sink mixture 15 mm (wall mounted) with 190 mm (7.5") long swivel spout, connecting legs and wall flanges including all fittings and as specified .

S&F in repairs CP Sink cock 15 mm (table mounted) with 171 mm (7") long swivel spout, including all fittings and as specified .

S&F in repairs CP Bib cock 15 mm with flange and aerator complete with all fittings and as specified .

S&F in repairs 15 mm CP Bib cock 2 way with wall flange and single knobs complete with all fittings and as specified .

S&F in repairs CP Angle cock 2 way ,15 mm with wall flange complete with all fittings as specified .

S&F in repairs 15 mm CP Central Hole basin mixture with 450 mm braided connection pipe (without pop-up) including all fittings as specified .

S&F in repairs CP Overhead rain shower - ABS type Square 180x180mm complete with all fittings as specified .

S&F in repairs CP Overhead rain shower - ABS type Round 200mm dia complete with all fittings as specified .

S&F in repairs CP Telephonic hand shower with / without arms 70mm dia with wall hook and 1.5 mtr hose pipe complete all as specified .

S&F in repairs CP Health Faucet ABS body (Push type) with wall hook and 1.0 mtr SS Braded rubber hose pipe complete all as specified .

S&F in repairs CP Toilet paper holder with wall flange complete all as specified

S&F in repairs CP Toilet paper holder with flap guard complete all as specified .

S&F in repairs CP Tumbler with holder complete all as specified .

S&F in repairs CP Towel rack with hooks 600 mm long complete all as specified .

S&F in repairs CP Towel ring complete all as specified .

S&F in repairs Corner glass shelf 300x300 mm with 'D' / F type brackets complete all as specified .

S&F in repairs CP Soap dish complete all as specified .

S&F in repairs CP Urinal spreaders complete all as specified .

S&F Aluminium alloy door cills having rubber strips in bottom, fit to door size complete all as specified

Demolition of cement concrete of any description as in roof padding , coping, chajja etc. water tank bases on roof etc.unreinforced (other than ground floor) complete all as specified. Note:- Debris/demolished material to be removed out of MD land or 500 m away from the work place in low lying area.

M&L for 25 mm average thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in roof levelling course complete all as specified

M & L for rendering 10mm thick in cm (1:3) on concrete surfaces of roof padding with integral water proofing compound @ 3 % by weight of cement content finished even & smooth without using extra cement complete all as specified and directed. Note :- Water proofing compound to be measured & paid separately.

Supply only integral water proofing compound complete all as specified

Cutting grooves in brick wall, 75mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified

M&L for APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polster non wove fabric (wt. not less than 150 gms/sqm) laid over primed / tack coat of paving bitumen 85/25 on roof surfaced by forced applicaion complete including taking down/removal of existing treatment complete all as specified

Dismantling of plain or corrugated steel/ FRP sheeting, any gauge, thickness etc as in roof covering/ wall cladding etc. complete all as specified

S&F 2mm thick Fibre glass reinforced translucent corrugated with two corruga-tions side lap fixed with coach screw and washer in roof and / plain sheeting in wall cladding etc complete all as specified

Notes :- 1. The contract is based on daily/ rutine maint/ repair/replacement nature of work. The deployment of contractor's Supervisor is compulsory and he will report office 9.00 AM daily except Holiday to collect Job cards for daily complaints and submit completed Job cards duly signed by users/ occupants in the evening at 17.00 PM on daily basis to concerned JE (Civ) / Engr-in-Charge.

Notes :- 2. If the contractor fails to deploy the supervisor at site for supurvision of work, a penalty @ 15000/- per month to be recovered through RARs at the time of submitting the Running RARs/ Payments.

Notes :- 3. The tradesmen deployed by the contractor will always be in possession with their working tools, small items like Nails, Screws, wooden/ plastic gutty , Tap and flush washers, Threads/ spanyarns etc providing by the contractor for repairs/maints work required for plumbing/sanitary fittings and carpenter work.

SNEH TRADERS

nevi constructions

Agarwal and Company