PJ No 103/25-NELLICKAL-PANACHIKKAD TEMPLE ROAD RE-CONCRETING RE-TARRING WARD-9

Amount

OD339531/2024-2025:SACRIFYINGEXISITING ROAD SURFACE TO ADEPTH OF 150MM AND COMPACTING THE AGGREGATES OBTAINED FROMSCARIFICATION WITH POWER ROLLER AS PER DIRECTION OF DEPTTL. OFFICERS AT SITE

OD339535/2024-2025:surface dressing of the ground including removing vegitation and in equalities not exceding 15cm. deep and disposal of rubbish lead up to 50m and lift up to 1.5m all kind of soil

4.9:Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406. By Mechanical Means with 1 km lead

75.5.1.1pb:Prime Coat - Low porosity - With Packed Bitumen Rates Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502

75.5.2.3pb:Tack Coat - With Packed Bitumen Rates Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.

75.5.11.1.A.2pb:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 - Packed Bitumen Rates Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 By Manual Means Type A (II) Bitumen (S-65)

75.8.1.1.A:Providing Plain cement concrete for wearing coat CC 1:2:4 (1 cement: 2 fine aggregate:4 course aggregate) laid to required slope as required including compaction, finishingand tamping etc .complete. Max. size of course aggregate not exceeding 25mm , mixedin concrete mixer etc complete as per specification (i) Nominal mix (1:2:4)

C ABRAHAM (BID ID -2114685)

VIJAY V NAIR (BID ID -2114679)

Abey Joseph (BID ID -2115219)

JACOB GEORGE (BID ID -2115195)

Bidder Name

JACOB GEORGE

N. C. UTHUPPAN

C ABRAHAM

Abey Joseph

VIJAY V NAIR