PROVN OF TOILET BLOCKS IN THE WAITING AREA AT KIRPAN TCP AND SPL REPAIR TO BLDG NO P 59 KEY PERSONAL QTR IN MES AREA AT BINNAGURI MIL STN UNDER GE S BINNAGURI

Amount

Taking down chowkats or frames exc 1.5 Sqm and n.exc 4 Sqm (without taking off shutter from the frames) and removal from site complete all as specified.

All as item No 1 here-in before but n.exc 1.5 Sqm each complete all as specified.

Taking down shutters and refixing in same openingof any description exc 1 Sqm but not exc 2 Sqm each complete all as specified.

Dismantling floor hearth or wall tiling including cement mortar bedding (incl backing) removing serviceable tiles to store and rubbish off the premises complete all as specified.

Taking down cement plaster any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for grils.rails etc complete all as specified.

Demolition of brick work or stone /boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified.

Demolition of cement concrete of any position and description complete all as specified.

Taking town of steel windows/ventilators of any size and description and removal from site complete all as specified.

Hacking out of old broken glass any thickness size quality or description from metal frame including punching or drilling out old glazing pins complete all as specified.

Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same to a distance exc. 500m and n. exc. 900m incl roughening of old concrete suirface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified.

Demolition of reinforced cement concrete in any description and in any position (reinforcement cut as required to facilitate demolition) complete all as specified and removal off the site.

Dismantling old PGI/CGI/Asbestos sheeting any gauge, thickness, including Nainital. Sikkim or similar pattern roof/facia etc complete all as specified and removal off the site complete all as specified.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and removal off the site complete all as specified.

M&L for non-skid ceramic coloured (400x400x7 to 8 mm thick) tiles set and jointed in neat cement slurry pointed in white or coloured cement to match in floor over 15mm thick screed bed in CM(1:6) all as specified.

M&L for glazed ceramic tiles (450x350x7mm thick) on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match over 15mm thick rendering in CM(1:4) complete all as specified.

M&L for providing machine cut polished Kota stone slab 18-20mm thick over cement screed bed and laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 15mm thick screed (CM 1:4) bed complete all as specified.

All as per item No 18 but in narrow width of vertical surfaces complete all as specified.

Supply and fix 0.50mm thick prepainted galvalume polyester coated (SMP coating) coloured metal roofing sheet trapezoidal profile having tensile strength 550Mpa in roof and ridges fixed with self drilling screws with EPDM washer etc complete all as specified.

---Ditto -- all as per item No 20 above but for as in roof covering , eaves boards, velly gutter, and other similar works complete all as specified.

M&L for 100 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in path /steps laid with and incl use and waste of form work and finishing the surface even and rough to receive the topping layer or tiling complete all as specified.

M&L 75mm thick PCC (1:3:6) type C2 as in plinth protection/footpath using 40mm graded stone aggregate finishing cement concrete surface even & smooth without using extra cement including bitumen filling in two panel etc complete all as specified

Materials and labour for 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in sub-base of floor over and including 50 micron polythene film laid complete all as specified.

M&L for 25 mm thick PCC (1:2:4) type B1 ( 20mm graded stone aggregate) , finished concrete surfaces even and rough to receive floor finishes complete all as specified..

M & L for providing plain cement concrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, Copping, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified

M & L PCC (1:2:4) type B1 (20mm graded aggregate) as in roof kerbs, slightly rounded or chamfered on edges, mixed with water proofing compound 200 ml per beg of cement or as per manufacturer instructions finished even and smooth on exposed concrete surface without using extra cement all complete all as specified. (Note: Water proofing compound shall be measured and paid perarately under relevant item of schedule 'A').

Material and labour for precast reinforced cement concrete (nominal mix) Type A1 1:1.5:3 (20mm graded stone aggregate) as in chajjas etc and set in CM (1:4) including necessary formwork complete all as specified. Note:- Reinforcement shall be measured and paid for separately.

Dismantling water tanks and removing to store of capacity exc 250 & n.exc 500 ltrs complete all as specified and removal off the site complete all as specified.

Material and labour for hoisting and fixing rotational moulded polyethylene(double layer) water storage tanks 500lit capacity (Cylinderical vertical), ISI marked(IS-12701:1996) hoisted and fixed in position including inlet, oulet, over flow connection, ball valves etc complete all as specified.

ALL as per item no. 30 but 1000 ltrs complete all as specified.

S&F 20 mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut complete all as specified.

M&L for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded on chamfered put together with glue pinned and joints complete all as specified.

S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x60 mm complete all as specified.

S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x60 mm complete all as specified.

M&L for plain, framed, factory made panelled shutters 35 mm thick (any number of panels) , with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified.

S&F second class hardwood, factory made glazed and skelton shutters 35 mm thick open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I Section8, Clause 8.20 (a) supplied and fitted to chowkats complete all as specified..

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing on SI page No 156 of SSR Part-II complete all as specified.

S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specification and drawing on SI page No.160 of SSR Part-II complete all as specified.

S&F of factory made steel windows with side hung shutters openable type including friction/projected type hinges steel handle and peg stay complete without glazing bars fixed to existiog opening and making to match as per existing surfaces complete all as specified..

S&F of factory made steel windows with side hung shutters openable type including friction/box type hinges steel handle and peg stay complete with glazing bars fixed to existiog opening and making good to match as per existing surfaces including taking out old/unserviceable steel windows complete all as specified.

S&F in repairs of factory made steel ventilator with top hung shutter including friction/ box type hinges ,steel peg stay complete including taking out old/unserviceable steel ventilator and making good to match as per existing surfaces etc complete all as specified.

S&Fof 3mm thick float glass panes ordinary quality n.exc 0.5sqm each fixed to steel frame complete with oil putty in square including steel pin complete all as specified.

All as per item No.43 here-in- above but 4mm thick figured glass pin headed type n.exc 0.5sqm each fixed to steel frame complete all as specified.

S&F Framed work such as grills,gratings, etc with ends of bars shouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified..

M&L brickwork with sub class B bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks complete all as specified.

M&L for brick work with sub class 'B' bricks using old size bricks, straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall complete all as specified.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar (1:6) finished even & fair complete all as specified..

Material and labour rendering 20mm thick cement plaster in CM 1:4 on fair faces of brick/concrete work surfaces in two layer 10mm each layer and top layer mixed with integral water proofing compound all as per manufacturer's instruction and as specified. Make: 'Plastocrete Plus' of Sika/ 'Pidiproof LW' of Pidilite for water proofing compound. Note: (i) WPC shall be measured and paid for separately as 'Supply only'. (ii) WPC to be mixed @200ml per 50 Kg bag of cement all as manufacturers instruction.

Supply only liquid water proofing compound complete all as specified.

M&L for 5mm thick in CM 1:3 in ceiling finishing the surfaces even and smooth without using extra cement complete all as specified.

M& l for two coat of Oil boound distember on new wall surface including preperation of the surface complete all as specified.

M&L for applying 1.0mm thick (average thickness( wall care putty on new or old wall surface complete all as specified.

M&L applying two coats of weather proof exterior acrylic emulsion paint of standard quality and make ,over a coat of white primer including preparation of new wall surfaces complete all as specified.

M&L applying two coats of weather proof exterior emulsion paint of standard quality and make ,over a coat of white primer including preparation of old wall surfaces complete all as specified.

M&L for two coats of synthetic enamel painting to new wooden surfaces over a coat of pink primer including preparation of surfaces area exc 10cm width & girth complete all as specified.

Material & labour for preparation of old painted surfaces of wood & wood based materials over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10cm width or girth complete all as specified

Material and labour for applying one coat of synthetic enamel paint on old painted steel and iron surfaces of any description over 10 cm in width or girth including necessary preparation of surfaces complete all as specified.

Complete removal of existing treatment from plastered or unplastered surfaces of walls including cleaning with scrapers, any number of coats and any width or girth etc and applying two coats of oil bound distemper over a coat of primer over super fine Birla or altek putty finish as required and complete all as specified.

Material and labour for preparation of old plastered ceiling surfaces by brooming down or steel wire brushing: scrapping down smoke soot, mould, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified.

M&L for three coat of white wash on walls on newly plastered surface incl preparation of surface complete all as specified.

M&L for applying three coat of white washing including preparation of new or previously untreated surface of ceiling complete all as specified.

Use and waste of formwork to chajjas and similar items including edges ,rough finished surfaces of concrete flat complete all as specified.

M&L for mild steel TMT bars,10mm dia and over cut to length, bent to shape required including cranking ,bending spirally, hooping for columns, hookings/ends and binding with and including MS wire not less than 0.9 mm dia or securing with clips complete all as specified.

M&L for mild steel TMT bars 6mm to 8mm dia cut to length , bent to shape required, including cranking , bending and binding with MS wire , not less than 0.9 mm dia or securing with clip complete all as specified.

M&L for MS flat iron bent to shape, holes drilled etc complete as in hold fast & wind ties etc including one coat of red oxide paint complete all as specified.

M&L for 10mm thick screed bed or bedding layers in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces for applying single component acrylic polymer modified, finished even and smooth without using extra cement complete all as specified. (NOTE : Polymeric membrane shall be measured and paid separately under relevant item of this Schedule 'A').

M & L water proofing treatment to RCC roof slab including parapet comprising of the following course of treatement / specified from bottom to top (a) Applying Bituminous primer oil based @ 0.40 Ltr/Sqm (conforming to IS-3384) over plastered surfaces of roof including parpet surfaces. Bituminious primer shall be 'Tar Mastic' manufactured by M/S STP LTD or 'EMW FLATE' manufactured by M/S Texsa India Ltd. (b) Over the priming coat laying one layer APP based polymeric membrance of approved manufacturer, 3 mm thick of weight not less than 3.60 Kgs/Sqm reinforced with non woven polyester fabric weight not less than 160 gms per Sqm. Polymeric members shall be taken to a height of 60cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrance flashing. (c) Application of two coat of bituminous aluminium paint over the polymeric membrane after necessary preparation and cleaning. Note :- (i) Laying APP based polymeric membrance shall be done by torch on method or as per manufacturers instructions. (ii) A minimum overlap of 100mm shall be made at the end and 75mm shall be made at the sides of the polymeric membrance respectively and sealed all ovelaps and joints as per Manufacturers instructions. (iii) APP based polymeric membrance shall be all as per list of makes.

Application of waterproofing Coating :Providing and applying Fosroc Brushbond Roof Guard, a single component High build fibre Reinforced Acrylic Waterproofing render for roofing system to be applied by brush, at three coats at a minimum dry film thickness of 1mm, which should cure by reaction with atmospheric moisture to give a tough elastomeric waterproof membrane. Solid Content : 70 % Tensile strength ASTM D 412 : 1.10 Mpa Elongation ASTM D12 : 100% Resistance to ageing due to : 1000 hours UV radiation ASTM D4587 E : No Change Rapid Chloride Penetration ASTM C 1202-03 : Very low Pull off adhesion ASTM D4541 : 0.92 Mpa Resistance to Algae growth ASTM D 5589-97 : Passes, Zero rating Permeability (mm) (BSEN 12390 part 8) : 5.0 Water vapour transmission (ASTM E96) : 6.0g/m² h (Note:Application of waterproof tcoating will be done by authorised applicator using materials of approvrd make)

M&L 40 mm thick PCC 1:2:4 type B0 (Using 12.5 mm graded stone aggregate) as in floors as levelling course for roof treatment complete all as specified.

S&F of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned tacks,or galvanised wire staples.or wooden beadings for doors complete all as specified.

Taking up or down steel water tubings bore 15mm dia and fittings etc complete and making good disturbed surfaces of walls/ceilings etc complete all as specified.

ALL as per item no. 73 but bore tubing 20mm dia complete all as specified.

M & L for steel tubing 15mm bore dia medium grade,galvanised fitting fixed complete to walls and ceiling or floor complete for this following complete all as specified.

ALL as per item no. 75 but bore tubing 20mm dia complete all as specified

ALL as per item no. 75 but bore tubing 40mm dia complete all as specified

S&F in repairs of PVC low level flushing cistern, 10 ltr capacity, syphonic action type white body with inlet ball valve, float , handle, bracket, long flush pipe of PVC to suit flushing cistern ( long bend) etc complete & connecting to WC complete all as specified.

S&F of PVC low level flushing cistern, 10 ltr capacity, syphonic action type white body with inlet ball valve, float , handle, bracket, long flush pipe of PVC to suit flushing cistern ( long bend) etc complete & connecting to WC complete all as specified.

S&F Water Closet (squatt pattern) of vitruous china squatting pan of pattern "ORRISA" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cirstern and flush pipe) including connection to trap and flushing pipe anti syphon pipe etc complete including trap set in and incl concrete complete all as specified.

S&F in repair wash hand basin, vitreous china, white, flat back (550x400mm) cutting for and pinning ends of brackets(Make:Parryware Code No.-0471,Indus Basin (white) or equivalent and waste fitting,brass chromium plated for glazed ware basin etc with long screwed shanks and fly nuts,flange end bedded in red lead cement and other end fixed 32mm including PVC waste pipe with CP /PTMTcoupling of required length complete all as specified.

S&F wash hand basin, vitreous china, white, flat back (550x400mm) cutting for and pinning ends of brackets(Make:Parryware Code No.-0471,Indus Basin (white) or equivalent and waste fitting,brass chromium plated for glazed ware basin etc with long screwed shanks and fly nuts,flange end bedded in red lead cement and other end fixed 32mm including PVC waste pipe with CP /PTMTcoupling of required length complete all as specified.

S&F of PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified.

S&F in repairs bib taps 15mm bore fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified.

Supply & fix Bib tap cast copper alloy, chromium plated with crutch or butterfly handle, screwed down for 15mm bore GI Pipe or for brass ferrule including taking down old unserviceable one complete all as specified.

Supply & fix angular stop cock made of brass chromium plated screwed both ends for iron pipe for 15mm bore complete all as specified. Make: Essco Cat Part No DLX-ESS 526 or equivalent as in the list of makes.

S&F in repairs angle valve, fancy type chromium plated, brass, 15mm bore complete all as specified.

Supply and fix PVC (SWR) pipes 110mm dia type 'A', single socketed, conforming to IS-13592:1992 in any length with rubber ring joints laid in trenches or in floors complete all as specified.

S&F for PVC (SWR) bends any radius fixed to PVC Pipes/Steel Gutters etc complete all as specified (Bore of pipe 110mm)

S&F 110mm dia PVC (SWR) branch piece single (single 'Y'/T) equal or unequal with acess door complete all as specified.

S&F 110mm dia PVC SWR vent cowl complete all as specified.

M&L in repairs for CI Nahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1(diameter of outlet 75 mm) complete all as specified.

S&F 250mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section complete all as specified and directed.

M&L for 150 mm size aluminium anodised cast type handles complete all as specified.

S&F of 200mm long aluminium anodised,barrel tower bolt of extruded section complete all as specified..

ALL as per item no. 95 but 150mm long complete all as specified.

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.

S&F in repair Vitreous china wash down water closet pan (pedesatal pattern) (EWC) white including plastic water closet seat cover closed pattern with flat bottom, and cover and mild steel chromium plated hinging divice etc complete fixed in repairs complete all as specified.

S&F in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device complete all as specified.

Supply and fix in repair CP Health Faucet of premium quality and make Jaquar or equivalent including two way bib cock and PVC telephonic flexible tube fixed to 15mm bore pipe complete all as specified.

S& F of 140 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified.

M&L for mild steel rolled sections conforming to Fe - 410 (Gde E-250) as in main and cross beams, hip and jack rafters; verticals , purlins where connected to common rafter and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified..

S&F 100mm size mild steel butt hinges medium weight complete all as specified..

S&F in repair 15 mm bore two way bip taps CP with flage complete all as specified.

M & L 60 mm thick M-35 grade factory made vibratory compacted cement concrete rubber moulded, interlocking paver block any shape and size confiroming to IS 15658-2006 with grey cement and pigment as approved laid over and incl 50 mm thick consolidated sand cushion and joints filled with sand complete all as specified.

M & L 80 mm thick M-40 grade factory made vibratory compacted cement concrete rubber moulded, interlocking paver block any shape and size confiroming to IS 15658-2006 with grey cement and pigment as approved laid over and incl 50 mm thick consolidated sand cushion and joints filled with sand complete all as specified

Material and labour for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in surface channels and drains complete all as specified

M&L for Plain Cement concrete (1:4:8) type D2 (Using 40 mm graded stone agg) in foundations,filling and mass concrete complete all as specified.

Material and labour for reinforced cement concrete (nominal mix) Type A1 1:1.5:3 (using 20mm graded stone aggregate) as in foundation, footings, plinth beams, bases for columns and the likes complete all as specified. Note: Reinforcement and formwork shall be measured and paid for separately.

Material and labour for reinforced cement concrete (nominal mix) Type A1 1:1.5:3 (20mm graded stone aggregate) as in columns and the like above footings etc complete all as specified. Note: Reinforcement and formwork shall be measured and paid for separately.

Material and labour for RCC 1:11/2:3 (nominal mix) (using 20mm graded stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as directed. Note: Reinforcement and formwork shall be measured and paid for separately.

Material and labour for reinforced cement concrete (nominal mix) Type A1 1:1.5:3 (using 20mm graded stone aggregate) as in slab supported on walls, beams and coloums etc.complete all as specified. Note: Reinforcement and formwork shall be measured and paid for separately.

Use and waste of Formwork to sides of pillars, posts, struts, piers,columns, and stanchions for rough finished surfaces of concrete complete all as specified.

Use and waste Form work to sides and soffit of beams, lintels,shelves of slabs/beams and similar works including supports, over hangs etc rough finished surfaces of concrete,flat.etc complete all as specified

Use and waste for formwork to sides of concrete foundations,plinth beams for rough finished surface of concrete, complete all as specified.

M & L for hard core of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified.

S&F central hole basin mixer for WHB complete all as specified.

S&F Brass CP mixer for mixing hot & cold water screweddown for iron pipeand fixed complete all as specified.

S&F tubular towel rail 20mm dia D type, Brass Chromium Plated 60 cm long between flanges complete all as specified.

S & F stainless steel soap dish best quality fixed to plugs with chromium plated brass complete all as specified.

S&F of swivel shower of CP with shower arm 150 mm size for fixing with 15 mm bore GI pipe complete all as specified.

Cutting chases, pinning in, making good to facing where required and pointing in CM 1:3 for concealed water tubing and making good, cutting n.exc 10cm girth as in brick/stone or concrete block walls complete all as specified.

M & L in repair Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Inclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

M&L for providing cement concrete type B-0 (1:2:4)(using 12.5 mm size graded aggregate) as in coping set incl weathering, slightly rounded or chamfered angles & thickness complete all as specified.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified

M&L for point wiring complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, fabricated sundn terminal box made out of GI sheet steel not less than 1.22 mm thick for boxes upto a size of 200 x 300mm and above this size not less than 1.63 mm thick duly painted with aluminum inside and anticorrosive paint outside, concealed in walls, with 3mm thick bakelite/plastic laminated sheet top cover fixed with cadmium plated iron screws for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCBs or bus bar shall be sone through proper size copper/brass thimbles. Where concealing of conduit is not feasible ie on surface of roof etc, conduit shall be fixed on surface with necessary saddles at no extra cost, One light point controlled by one way switch 5/6 amps complete all as specified.

ALL as per item no. 127 but One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps complete all as specified.

ALL as per item no. 127 but One socket out let 5/6 amps point on the same board complete all as specified.

ALL as per item no. 127 but One socket out let 5/6 amps point on the independent board complete all as specified..

ALL as per item no. 127 but One bell/buzzer point controlled by one bell push button complete all as specified.

ALL as per item no. 127 but One light point controlled by two two way switch 5/6 amps complete all as specified.

All as per item no. 127 above but multi stranded coppper conductor of size 2.5 sqmm for 15/16 Amp point on independent board complete all as specified.

S&F in repair socket 3 Pin, 5/6 amps, 230 Volts AC (ISI Marked) white ivory finish flash type complete all as specified.

S&F in repair socket outlet 2 in 1, 5 Pin 5/15 Amp multipurpose 230 volt flush type complete all as specified.

S&F in repair switch piano flush type 5/6 amps single pole one way complete all as specified.

S&F switch piano flush type 5/6 amps single pole one way complete all as specified.

S&F in repair bell/buzzer push 5/6 amps flush type white/ivory finish complete all as specified.

S&F in repair switch piano type 2 way 5/6 Amp, 230 Volt, flush button single pole one way complete all as specified.

S&F in repair switch piano flush type 15/16 amps single pole one way complete all as specified.

S&F in repair call bell ding dong type AC Single pole 220/240 Volts, surface type complete all as specified.

S&F in repair ceiling rose, surface type with back plate, three terminal /PVC/ polycarbonate, isolated body, complete all as specified.

S&F ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified.

M & L in repair lamp holder, insulated PVC/ Polycarbonate body, with back plate suitable for batten/angle fittings complete all as specified.

S & F in repair deluxe fan Electronic regulator 230 V AC 50 Hz, 100 watt, rotary step type, white/ivory finish complete all as specified.

S&F, IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified.

Supply and fixing LED lights fitting 1x 20W (4 feet long), 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.

S&F IP 20, LED Mirror light fitting 1 x 10 W, (or nearest next higher wattage) 5700 K, wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser, integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc complete including 01 No 10 W LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size including necessary taking down the old unserviceable fitting complete all as specified.

Supply and fixing LED lights fitting 1x 10W (2 feet long), 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protectioncomplete all as specified.

Material and labour for concealed sub-main wiring alongwith earth wire of size of 2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire, ISI marked, FRLSH, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete, including taking down old unsv aluminium submain wiring complete all as specified. NOTE : Two runs of 4 sqmm conductor for main and one run of 4 sqmm conductor as earth wire with proper colour coding including one run run of PVC conduit shall be measured as one unit length. Connections of cables wit MCBs or bus bar shall be done through appropriate size brass/ copper thimbles

S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), IP-43 double door, Tripple pole & neutral with 200 amps rated bus bar, IP-20 protection, including four pole MCCB with blanking plates complete all as specified.

S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 8 way, single pole and neutral, with din rail, neutral link, earth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface complete all as specified

S&F MCB's Single pole and neutral 40 amps, 240 volts, ‘C’ curve, 10KA all complete as specified.

S&F MCB's Single pole, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete as specified.

S&F heavy duty exhaust fan 300 mm sweep MS body with antidust painting, 4 blade with heavy duty motor and double ball bearing,, single phase 230/240 volts copper wounds, complete with all accessories as bird guard/ louvers shutters etc incl making connections with 3 core flexible multistranded copper conductor of size 0.75 Sqmm run through flexible pipe all as specified and as directed including cutting holes and making good the disturbed surfaces of walls in CM(1:4) and finishing the surface as per existing color scheme.

Takingout Ceiling Fan 1200 mm sweep from its original position and Refixing/Hanging after B/R plaster work complete all as specified.

M & L for sheet metal enclosure fabricated out of 2.0 mm thick CRCA sheet, totally enclosed type, dust & vermin proof, with suitable sized supporting MS angles & suitable openings at top & bottom for entry of outgoing / incomming cables, fixed with nuts & bolts & front side openable with hinged shutter with suitable locking arrangement duly painted with 2 coats of powder coated paint over a coat of red oxide primer (spray paint) with minimum dimensions (90 x 75 x 20 cm ) flush to wall for incorporating 01 No TPN DB, 04 Nos electronic meters etc complete all as specified

Material and labour for earthing with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground vertically to depth not less than 2.25m below the ground level with top edge of earth plate at a depth not less than 1.5m below the ground level connected to galvanized iron wire 4mm dia earth lead by means of bolts & nuts,check nuts & washers made of galvanised steel, earth strip protected by and including PCC (1:2:4) type B1 precast RCC cover slab (M-15) reinforced with 8mm dia TMT bars 100mm center to center bothways including one handle made of 10 mm dia round bar, including necessary excavation and earthwork in any type of soil, 20 mm dia medium grade galvanized steel tube for watering with one end fixed with cast iron funnel and wire mesh, 15 mm bore medium grade galvanized steel tubing for drawing earth lead GI strip protection & common salt, charcoal in alternate layers etc. complete all as shown in EP No 3 of SSR Part 1 2009 and testing on completion complete including dismantling the existing unserviceable earthing complete all as specified

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 3.5 core complete all as specified

M& L for Surface dressing n exc 15 cm deep for adjoining area complete all as specified.

Excavation in trenches not exceeding 1.5m wide and n.exc 1.5m in depth for laying of cables etc and getting out in any type of soil complete all as specified

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified

Removing excavated material n.exc 50m and depositing were directed at a level not exceeding 1.5m above the starting level complete all as specified

M&L for sand cushioning in cable trenches over & under the cable, with river washed coarse sand, as per standard practice with proper compaction complete all as specified NOTE : Punned thickness 18 cm shall be considered for payment as per para 19.75 of SSR Part-I.

Supply and laying for brick protection for protection of cable over sand cushioning cables inside the trench by using common brunt clay building bricks sub-class “B” old size brick and flat and width wise along the axis of the trench complete all as specified

Taking out old unserviceable GI Pipe of any size from site complete all as specified Note : The Excavation and earth work shall be mesured and paid separately under relevant item of Schedule complete all as specified.

M&L Gun-metal, globe or gate valves,15mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.

Supply and fix Gun metal ,globe Gate Valves with iron wheel head of 20 mm dia bore complete with all accessories all as specified

Supply and fix Gun metal ,globe Gate Valves with iron wheel head of 25 mm dia bore complete with all accessories all as specified

Supply and fix Gun metal ,globe Gate Valves with iron wheel head of 40 mm dia bore complete with all accessories all as specified

M& L for cutting existing GI pipe alteration or addition of 40/50 mm dia bore for inerstion of reducer Tee complete with all accessories all as specified

Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm all as specified.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core all fixing and connecting accessories such as cable lugs, cable glands, nut, bolts, complete all as specified

SHRI MANOIRANJAN BISWAS (BID ID -3125875)

M/S ALOKE CHAKRABORTY and CO (BID ID -3126194)

M/S PLABAN KUMAR GOPE (BID ID -3127535)

BINOD TRADING CO. (BID ID -3125939)

flexpro construction company (BID ID -3126347)

SUMAN CHAKRABORTY (BID ID -3127557)

SINGH & CO (BID ID -3127619)