Maintenance work of Vanasree dormitory in Thekkady Range during 2025-26.

12 mm cement plaster of mix: 1:4 (1 cement: 4 fine sand)

Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having ov dimension 115 mm x 37 mm with wall thickness 2 mm ( 7 0.2 mm) with inbuilt beading on one side, the styles and rails mitred cut and joint at corners by inserting 2 nos PVC profile reinforcement of size 75 mm x 200 mm long with cross section size of 28 mm x 30 mm having wall thickness 2 mm (7 0.2 mm). Styles, rails and reinforcements to be fusion welded togedier. Only hinges side vertical style to be reinforced with PVC profile reinforcement in full length, Printed and laminated PVC lock rail of size 110 mm x 37 mm having wall thickness 2 mm (7 0.2 mm) to be welded horizontally with the vertical styles after inserting PVC profile reinforcemenet as in styles and rails, providing with PVC snap fit beading, panels of 100 x 20mm printed & laminated and inserting 2 nos 6 mm dia bright steel rod horizondally with both side threaded and tightened with check nuts and washers com per manufacturer's specification and direction of engineer-in-charge

Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of printer applied (3) 0.75 ltr/10 sqm of approved brand and manufacture

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.Two coats

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore

Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms

Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. 10 litre (full flush) capacity- white

Providing and fixing solid plastic Seat with lid for pedestal type W.C. pan complete:White solid plastic seat with lid

Flexible pipe32 mm dia

Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.