REPAIR TO JOINERY PLUMBING INCL SANITARY FITTINGS FIXTURES FLOORING,ROOF COVERING WALL PANELLING WORKS ETC IN CERTAIN BLDGS IN ZONE II AND ZONE III INCLUDING TAPOVAN AND MANA AREA AT MIL STN JOSHIMATH

Amount

Demolition of cement concrete in ground floor and paving n.exc 15 cm thick (below or above ground level) etc complete all as specifed and directed by EIC.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by EIC.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid,bedded and pointed in any mortar complete all as specified and directed by EIC.

Demolition of concrete block walling, pre-cast block walling, RR masonary in cement mortar including all quoins archas pillars etc complete all as specifed and directed by EIC.

Taking down cement plaster on brick or stone wall etc incl raking out joints hacking for key scrubbing down with water complete all as specifed and directed by EIC.

Raking out joints/ pointing in walls for random rubble or polygonal rubble uncoursed or brought up to courses masonry built in Cement or cement lime mortar complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting any gauage thickness including Nainital and similar pattern complete all as specifed and directed by EIC.

Dismantling of ceiling board /Wall panelling of any thickness and of any description including cover fillets complete all as specifed and directed by EIC.

Dismantling of frame work timber scantling 40 Sqcm and over in section in any position complete all as specifed and directed.

Dismantling of framed timber fillets under 40 Sqcm in section complete all as specifed and directed by EIC.

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) exc 1.50sqm but n. exc 4.0sqm each complete all as specifed and directed by EIC.

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) n.exc 1.50 sqm each complete all as specifed and directed by EIC.

Taking down of shutter exc 1.0 sqm and not exc 2.0 sqm each complete all as specifed and directed by EIC.

Taking down of shutter n.exc 1 sqm each complete all as specifed and directed by EIC.

Taking up or down 15 mm bore GI steel tubing and connection including cleaning for re-fixing or removal to store complete all as specifed and directed by EIC.

Taking up or down 20 mm bore GI steel tubing and connection including cleaning for re-fixing or removal to store complete all as specifed and directed by EIC.

Dismantling PVC water tank and removing to store exeeding 250 but n.exc 500 ltrs complete all as specifed and directed by EIC.

Dismantling PVC water tank and removing to store exeeding 500 but n.exc 1000 ltrs complete all as specifed and directed by EIC.

M&L for PCC 1:2:4 type B-0 (Using 12.5 mm graded stone aggregates) of 25 mm thick as in leveling course ,finished surfaces even and rough to receive floor finish complete all as specifed and directed by EIC.

M&L for PCC 1:4:8 type D2,(using 40mm graded stone aggregates) as in foundation,filling and mass concrete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of motar 15 mm thick for laying floor finished in cement mortar 1:6 complete all as specifed and directed by EIC.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of motar 15 mm thick for laying floor finished in cement mortar 1:6 complete all as specifed and directed by EIC.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting over and including 10mm thick rendering in CM 1:4 as in backing coat of tiles complete all as specifed and directed by EIC.

M&L for Vitrified coloured tiles (600mmx600mm)x9/10mm thick in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of mortar 15 mm thick in cement mortor 1:6 laying in floor finished complete all as specifed and directed by EIC.

M&L for Vitrified coloured tiles (600mmx600mm)x9/10mm thick in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting over and including 10 mm thick plastering in CM 1:4 as in backing coat of tiles complete all as specifed and directed by EIC.

M&L for glazed ceramic coloured tiles of size 350 x 250 x 7mm/450 x 350 x 7mm thick over and ncluding 10 mm thick rendering in cement mortar 1:4 as in backing coat for tiles on vertical surfaces,set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specifed and directed by EIC.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete includung 20 mm screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and includung 10 mm rendering in cement mortar 1:4 complete all as specified and directed.

M&L for providing 75 mm thick cement concrete in 1:3:6 type C-1,(using 20 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and directed.

M&L for Prepolished chequered cement concrete tiles 30cmx30cmx25mm thick, set, jointed and pointed and in need cement slurry in floor with grey cement and pigment and including over screed bed or bedding layer of mortar 20 mm thick laying floor finished in cement mortor 1:6 complete all as specified and directed.

M&L for pre-cast cement concrete block masonary 1:3:6 type C-1 (Using 20 mm graded stone agg) with solid block exc 10 cm in width and setting in CM 1:6 etc complete all as specifed and directed by EIC.

All as per Srl item No.31 here- in before but except blocks complete all as specifed and directed by EIC.

M&L for walling of random rubble uncoarsed as well bonded bedded and solidly hearted in CM 1:6 complete all as specifed and directed by EIC.

All as per item No 33 here in before but except stone complete all as specifed and directed by EIC.

Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface nexc 20mm to face stone and dressing of face beds and joints as specified of random rubble walling, uncoursed or brought upto courses complete all as specifed and directed by EIC.

M&L for cement mortar 1:3 raised pointing to randam or polygonal rubble uncoursed or brought upto courses complete all as specified and directed

M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in coping including formed work complete all as specifed and directed by EIC.

M&L for 15 mm thick rendering in cement mortar 1:6 or fair faces of brick or cement concrete surfaces finished even and smooth without using extra cement complete all as specifed and directed by EIC.

M&L for 15 mm thick rendering in cement mortar 1:4 or fair faces of brick or cement concrete surfaces finished even and smooth without using extra cement complete all as specifed and directed by EIC.

M&L for providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of suitable primer complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying three coat of white wash complete all as specifed and directed by EIC.

S&F for 2nd class hard wood plain ,solid ,straight chowkats and frames ,wrought framed rebated on the solided rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F for 30mm thick flush shutter solid core construction with particle board core and plywood face panels, commercial type on both side complete all as specified and directed.

M&L for 30mm thick 2nd class hard wood glazed and skeleton shutter, open rebated and prepared to receive glass gauge, etc (with sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc size of members of shutter as specified in SSR part I section 8 clause 20 (b) of windows, ventilator etc complete all as specifed and directed by EIC.

S&F for 35mm thick 2nd class hard wood glazed and skelton door shutter divided into square, open rebated and prepared to receive glass/gauge etc (without sash barsi) edges of framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass/gauge etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.20 (a) complete all as specified and directed.

S&F for Solid PVC door frame of size 50mmX47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suupplying & fixing in opening complete all as specified and directed .

S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC'C' channel having a PVC sheet strip of 20mm width stuckinside solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bootom rail; paneling of plain clour PVC sheet to be fitted in the M.S frame welded/ sealed to the stieles & rails with suitable PVC sheet beading, and joining together with solvent cement, complete shutter fix in the frame at site as per specification and drawing complete all as specified and directed.

S&F for Steel windows with side hung shutters including projecting with box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F for Steel windows with side hung shutters including projecting with box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (Using 20mm graded stone agg) as in lintel upto 1.5 m clear span, cills, steps, seismic and other similar articles ,bed plate copings & hold fast including form work etc complete all as specifed and directed by EIC.

S&F for anodised aluminum section for making doors, windows, partition wall, shutters etc including styles & rails with standard anodized aluminum section, with one or more rebates including aluminium snap beading complete all as specified and directed (Glazing, rubber beading,hinges etc shall be measured and paid separately)

M&L for rubber beading for fixing glass panes in aluminium frame work complete all as specified and as directed.

M&L for 12 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber/aluminium frame work complete all as specified and directed.

S&F for 4.8 mm thick tinted sheet glass, fixed to aluminum frame work in panels n.exc 0.5 Sqm in each pane, complete all as specified and directed.

S&F for butt hinges of stainless steel 100mm size complete all as specifed and directed by EIC.

S&F for butt hinges medium weight cold rolled mild steel 100mm complete all as specifed and directed by EIC.

S&F for mild steel butt hinges of 75mm long each complete all as specifed and directed by EIC.

S&F for 200 mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for 150 mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for 150mm long anodised extruded aluminium alloy handles, fabricated type. complete all as specified and directed.

S&F for 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F for floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring, fixed in floor (140mm size), fixed as in repair complete all as specified and directed.

S&F in repair for door closer hydraulically regulated aluminum (dia cast) body, designation No 3, universal type, suitable for door shutters of 851mm to 1000mm in width and of weight between 61 to 80 Kg, fixed as in repairs, complete all as specified and directed.

S&F in repair for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.

S&F in repair for 300mm mild steel ordinary rat tail rod pattern springs incl roller and roller plate complete mild steel all as per specified and directed.

S&F for 0.56 mm nominal dia wire galvanised mild steel wire cloth and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specifed and directed by EIC.

S&F in repair for 0.56mm nominal dia wire galvanised mild steel wire cloth and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specifed and directed by EIC.

S&F for stainless steel wire mesh of 0.36 mm nominal dia wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staple complete all as specifed and directed by EIC.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or driling out old glazing pins/spring clips and providing and fixing new ones complete all as specifed and directed.

S&F for 3 mm thick sheet glass ordinary qauality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

M&L for second class hard wood, clean sawn, in scantling timber frame and fixed with nails complete all as specifed and directed by EIC.

All as per item No 74 here-in before but except scantling complete all as specifed and directed by EIC.

M&L for second class hard wood plain fillets size square in section, clean sawn, secured with nails exc 13 but n exc 25 sqcm complete all as specifed and directed by EIC.

All as per item No 76 here-in before but except fillets complete all as per specified and directed.

M&L for second class hard wood plain fillets size square in section, clean sawn, secured with nails exc 03 but n exc 06 sqcm complete all as specifed and directed by EIC.

All as per item No 78 here-in before but except fillets complete all as per specified and directed.

M&L for preparation of wood surfaces new or old wood and wood based materials of any description and treated with creosote oil complete all as specifed and directed by EIC.

M&L for 6mm thick plywood grade BWP type BB fixed with nail to timber frame work in wall cladding complete all as specifed and directed by EIC.

S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

S&F for Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

M&L for preparation of old decorated steel surfaces any description,over 10cm in width or girth, not otherwise describedand applying one coat of synthetic enamel paint on roof complete all as per specified and directed.

M&L for preparation of new steel surfaces of any description,over 10cm in width or girth, not otherwise describedand applying two coat of synthetic enamel paint on roof over a coat of red oxide primer complete all as per specified and directed.

M&L for Preparation of new wooden surface of any description over 10cm width or girth applying two coat of synthetic enamel paint over a coat of pink primer complete all as specifed and directed by EIC.

M&L for Preparation of old wooden surface of any description over 10cm width or girth applying one coat of synthetic enamel paint complete all as specifed and directed by EIC.

S&F for 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugated side lap fixed with L or J type or cranked hook bolts complete all as specifed and directed by EIC.

S&F for 0.80 mm thick plain,galvanised mild steel sheeting in ridges, hips, valley gutters, drips and straight flashings with grads of zinc coating 275 complete all as specifed and directed by EIC.

S&F for 0.63mm thick galvanised corrugated mild steel sheeting with grade of zinc coating with two corrugation side lap fixed with L or J type or cranked hook bolts in roof wall etc. complete all as specifed and as directed.

All as per item No 90 here-in before but except sheet complete all as specifed and directed by EIC.

S&F for frame work for suspended false ceiling GI exposed ceiling suspension system of grid size 600mm/600mm with main runner 38mmx24mm, cross tee 29mmx24mm and wall angle 24mmx24mm including 6 mm dia GI/MS bar hanger fixing with steel dash fastner or iron purlins from the roof with adjustment clip providing position for light fixture etc all as specified and directed.

S&F for false ceiling of Everest designer boards of size 595mm x 595mmx4mm thick fixed on GI snap grid, complete all as specified and directed.

S&F in repair for 20 mm dia chromium plated pipes for curtain rods complete all as specified and directed.

S&F in repair for Chromium plated brackets and knobs for curtain rods complete all as specified and directed.

S&F 15mm bore GI steel tubing medium grade with all fitting fixed to wall and ceiling or laid in floor complete all as specifed and directed by EIC.

Re-fixing 15mm bore old steel tubing and connection in view old position (wall, ceiling, floor etc) complete all as specifed and directed by EIC.

S&F 20 mm bore GI steel tubing medium grade with all fitting fixed to wall and ceiling or laid in floor complete all as specifed and directed by EIC.

Re-fixing 20 mm bore old steel tubing and connection in view old position (wall, ceiling, floor etc) complete all as specifed and directed by EIC.

S&F for rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position including 20mm dia HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule complete all as specifed and directed by EIC.

S&F for rotational moulded polyethylene water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position including 20mm dia HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule complete all as specifed and directed by EIC.

S&F for 110mm bore PVC (SWR) pipe single socketed any length with rubber ring joints laid in trenches or in floor complete including taking down all as specifed and directed by EIC.

S&F for PVC (SWR) bends any radius 110mm bore pipe incl taking down complete all as specifed and directed by EIC.

S&F for 75 mm bore PVC (SWR) pipe single socketed any length with rubber ring joints laid in trenches or in floor including taking downcomplete all as specifed and directed by EIC.

S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair for Vitreous china wash hand basin (550X400mm) white, flat back excluding taps, waste chain and plug and porcelain stopper but including brackets complete all as specifed and directed by EIC.

S&F in repair for Vitreous china premium quality table top wash hand basin of size 385 x 385 x13 mm white, excluding taps, waste chain and plug and porcelain stopper complete all as specifed and directed by EIC.

S&F in repair for 32mm bore waste fittings brass chromium plated for glazed ware sinks basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and othter end fixed complete all as specifed and directed by EIC.

S&F in repair for 15mm bore fancy type pillar taps cast copper alloy with capston head chromium plated screwed down high pressure with or with out littred hot or cold with long screwed shanks and flynuts screwed for iron pipe complete all as specifed and directed by EIC.

S&F in repair for 10 ltrs capacity PVC valve less syphonic action type flushing cistern low level white inlet ball valve, float , flush pipe and handle including brackets and fixed complete all as specifed and directed by EIC.

S&F in repair for PVC connection 15mm dia and 600mm long complete all as specifed and directed by EIC.

S&F in repair for PVC waste pipe 32mm dia complete all as specifed and directed by EIC.

S&F in repair for soap dish acryrlic type 138mmX102mmX75mm complete all as specifed and directed by EIC.

S&F in repair for sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and waste incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connectings union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as per specified and directed.

S&F in repair for 15mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 142 gms )complete all as specifed and directed by EIC.

S&F in repair for 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms )complete all as specifed and directed by EIC.

S&Fin repair vitreous china squatting pan 'Orissa' pattern size 580mmx440mm with white integral footrest (excluding flushing cistern and flush pipe including making good )complete all as specifed and directed by EIC.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolt, flushing cistern and flush pipe) including making good complete all as specifed and directed by EIC.

S&F in repair plastic water closet seat, black and white closed pattern with flat bottom and cover and mild steel chromium plated plated or aluminium hinging device complete all as specifed and directed by EIC.

S&F in repairs CP grating of size 100mm dia complete all as specifed and directed by EIC.

S&F in repair for 15mm bore brass chromium plated wall mixer for mixing hot and cold water screwed down for iron pipe and fixed to wall complete all as specifed and directed by EIC.

S&F in repair for 15mm bore brass chromium plated WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed to wall complete all as specifed and directed by EIC.

S&F in repair for 15 mm bore bib tap CP fancy type with crutch or butterfly handle screwed down for iron pipe or for brass ferrules and complete all as specifed and directed by EIC.

S&F in repair for 15mm bore chromium plated brass,fancy type angle cock screwed for iron pipe or union and fixed complete all as specifed and directed by EIC.

S&F in repair for 15mm bore chromium plated brass,fancy type 2-in-1 angle cock screwed for iron pipe or union and fixed complete all as specifed and directed by EIC.

S&F in repair for 15mm dia stop valves, fancy type chromium plated screwed down high pressure, with crutch or butterfly han dle screwed with both ends for iron pipe or for union complete all as specifed and directed by EIC.

S&F in repair for 15mm bore Bib taps standard of PTMT any colour high pressure screwed for iron pipe fixed in repair (minimum weight 90 gms) complete all as specified and directed.

S&F in repair for 15mm bore stop cock standard of PTMT any colour high pressure screwed for iron pipe fixed in repair (minimum weight 90 gms) complete all as specified and directed.

S&F in repair for CP towel rail of 20mm dia with hook 600mm long complete all as specifed and directed by EIC.

S&F in repair for CP telephonic shower rose complete all as specifed and directed by EIC.

S&F in repair for Vitreous china bowl urinal flat back size of 465mmX355mmX265mm white (minimum) with grating and union for discharge pipe including flush pipe and waste pipe (excluding flushing cistern) complete all as specified and directed .

S&F in repair for Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

Supply & fix in repair glass corner shelf assembly fancy type made of 5 mm thick sheet glass of size 250mm x 250mm fixed with CP brackets complete all as specified and directed.

S&F in repair for CP urinal spreader for fixing with 15mm dia pipe complete all as specified and directed.

S&F in repair 15mm dia CP jet with CP flexible pipe 90cm long incl necessary fittings complete all as specified and directed .

S&F in repair 15mm bore Health faucet with CP felxible pipe of 90cm long incl necessary fittings complete all as specified and directed .

M&L for 16-18mm thick granite work (of any type) on top of cooking plateform and bar counter including cutting polishing rounding on edge etc machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over and including 15mm thick screed bed in CM 1:4 including grinding and polishing including demolition of existing plateform top complete all as specified and directed.

MS NANDAN SINGH FARSWAN

SIDHARTH CONSTRUCTION