Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹26.2 L
EMD Value
₹26,202
Closing Date
12 Nov 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, Capital Project Division No.1, Gandhinagar
4235-Social Justice And Empowerment Renovation/Repairing/Alteration Works in Bal Surksha Gruh in Sector-19 in Gandhinagar.
361706
Tender Notice No.33/2 of 2026-27
Open
Civil - All
Works
Gandhinagar
6 documents required · 6 mandatory
₹1,500
Executive Engineer, Capital Project Division No.1, Gandhinagar.
₹26,202
2 Nov 2026
2 Nov 2026
2 Nov 2026
12 Nov 2026
2 Nov 2026
90 days
MEMORANDUM SHOWING THE ITEMS OF WORKS TO BE CARRIED OUT
Estimated rates UNIT
Quantities TOTAL AMOUNT
Quantities TOTAL AMOUNT
Item No Estimated but may Items of works ACCORDING TO
In Figure In words Unit
be more or less ESTIMATED QUNATITIES
Excavation for foundation upto 1.5m depth including sorting out and stacking of useful
Two hundred twelve rupees
1 85.00 materials and disposing off the excavated stuff upto 50 Meter lead.[A] Loose or soft 212.52 Cu.M.
and fifty two paise only
Brick work using common burnt clay building bricks having crushing strength not less Four thousand two hundred
2 41.00 than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 fine 4214.09 fourteen rupees and nine paise Cu.M.
sand)(B) Conventional only
Brick work using common burnt clay building bricks having crushing strength not less Four thousand five hundred
3 14.00 than 35 kg./Sq.Cm. above plinth level upto floor TWO level in Cement Mortar 1:6 (1- 4502.81 two rupees and eighty one Cu.M.
Cement : 6 -fine sand)(B) Conventional (=4172.37+285.86) paise only
Providing and laying cement concrete 1:3:6 (1Cement : 3- Coarse sand: 6- Graded brick
Three thousand forty three
4 23.00 bat aggregate 40mm normal size) and curing complete excluding cost of formwork in 3043.36 Cu.M.
rupees and thirty six paise only
(A) Foundation and Plinth.
Removing and scrapping of old deteriorated plaster of any thickness from
Twenty rupees and fifty five
5 343.00 masonry/RCC member including stacking of servicable material and disposal of 20.55 Sq.M
unservicable from site of work with all lead and lift.
Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L
One thousand five hundred
Hooks, Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer or G.I
6 43.00 1513.25 thirteen rupees and twenty five Sq.M
limpet washer. filled with white lead complete excluding the cost of purlins, Rafters
and Trusses. @ 0.60 mm thick sheet.
Steel work welded, in built up sections, framed work including cutting, hoisting, fixing
in position and applying a priming coat of red lead paint. [A] In beams and joists, Eight thousand eight hundred
7 6.00 channels, angles, tees, flats with connecting plates or angle cleats as in main & cross 8837.50 thirty seven rupees and fifty Quintal
beams.Hip & jack rafters, purlins connected to common rafters and like paise only
Applying priming coat and Painting two coats on new or previously painted steel and
other metal surface with enamel paint, brushing, interior to give an even shade One hundred twenty eight
including cleaning the surface an even shade including cleanicn the surface of all dirt, rupees and sixty two paise only
dust and other foreign matter.(=36.06+91.29)
Providing and fixing F.R.C.. Manhole cover 0.60 M. x 0.45M. size having weight not less
Nine hundred sixty one rupees
9 5.00 than 10 Kg.with labour charges etc. complete..as per EIC 961.72 Nos
and seventy two paise only
Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base
of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 laid over and jointed One thousand nineteen rupees
with grey cement slurry including rubbing and polishing etc. complete. (A) 25 mm thick and thirty nine paise only
Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm /
One thousand five hundred
mm x 450 mm x 8 mm in skirting, risers of steps and dedo on 10 mm. thick cement
11 165.00 1513.28 thirteen rupees and twenty Sq.M
plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement slurry.
eight paise only
20mm thick sand faced cement plaster on walls upto height 10 metres above ground
level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm Three hundred fifteen rupees
thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. and sixty nine paise only
Finishing wall with weather proof exterior emulsion paint on wall surface (two coats)
to give an required shape even shade after thoroughly brushing the surface to remove One hundred twenty rupees
all dirt, and remains of loose powdered materials.etc complete and twenty six paise only
Providing and fixing MS angle (ISA 45 X 45 X 5)frame Of "Y" shape having size 450mm x
450mm x 600mm for supporting concertino razor blade supporting with one coat of Two hundred ninety eight
primer and two coat oil paint including fixing of angle in concrete/to weld with M.s rupees and twelve paise only
member as directed by Engineer-In -Charge.
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm
dia 10 mt openable length having 50 no rounds per 6 mt length, upto 3mt height of
wall with existing angle iron (45mm x45mm x5mm )requird shaped As per Directed
Engeenier in charge, placed 2.4mt or 3.00mt apart and with 4 horizontal R.B.T. Three hundred thirty seven
15 172.00 reinforced barbed wire(3 mm-9.5 kg/10 mtr), stud tied with G.I. staples and G.I. clips to 337.78 rupees and seventy eight paise Rmt
retain horizontal, including necessary bolts or G.I.barbed wire tied to angle iron with only
reinforced barbed tape (R.B.T.)/Spring core (2.5 mm thick) and weight
gm/meter at compound wall for ESR M4/ intakewell,all complete as per direction of
Engineer-in-charge.
Providing and fixing Chainlink Jali 1.20 mt Height on ground and fixing around
M.S.Pipe(50 x 50 x 3) mm with necessary pins etc. in line & Level etc complete One thousand two hundred
16 57.00 including priming coat of red lead paint and two coats of oil paint on angle including 1292.53 ninety two rupees and fifty Sq.M
Concrete of 1:3:6 @size 0.30 x 0.30 x 0.45 m with excavation and all necessary fixtures three paise only
& fastening as directed by Engineer In Charge.
Providing and drawing art work or solgans on room wall with Weatherproof Exterior One thousand six hundred
17 266.00 paint etc. complete as directed by Engineer In Charge. 1688.29 eighty eight rupees and twenty Sq.M
nine paise only
Providing Stainless Steel made Single Bed (size *L-1830mm x B-910 mm x H-400 mm )
Using 40mm X 19mm Hollow Pipe as Main Frame of Bed with 2 inch Leg All corner of
Seventeen thousand seven
bed , top Hydraulic shutter Made of 30 x 30 mm hollow pipe main frame and 19x
18 15.00 17770.95 hundred seventy rupees and Nos
19mm Pipe in horizontal and vertical Support zali and all side covered with 19 gauge
ninety five paise only
S.S Plate as Shown In Image etc. complete as directed by Engineer In Charge.
Providing M.S made Locker (size *L-915mm x D-480 mm x H-1980mm ) Mild Steel MS 8 Twelve thousand four hundred
19 5.00 Locker With Cam Lock as Shown In Image etc. complete as directed by Engineer In 12428.05 twenty eight rupees and five Nos
Charge. paise only
Providing & fixing standard extruded Aluminum Openable Mosquito Net Shutters
Window's with anodise hollow section frame of approved shade & pivoted single
shutter fabricated from aluminum standard section for outer frame size 50.00 x
x 1.2 mm (@ Wt 0.57 Kg / Rmt) and window frame size same as frame 40.00 x 18.00 x Three thousand two hundred
20 32.00 1.2 mm (@ Wt 0.46 Kg / Rmt) including providing rubber gasket and beading clipS 3282.52 eighty two rupees and fifty two Sq.M
including providing handle/locking arrangement, bracket, stoppers etc accessories paise only
fittings with silicon and all required supports, materials labour and equipments as per
directed by engineer in charge.
Providing M.S made News Paper Stand (size *L-915mm x H-1200mm ) as Shown In Five thousand two hundred
21 1.00 Image etc. complete as directed by Engineer In Charge. 5226.75 twenty six rupees and seventy Nos
five paise only
Providing and supply medium Back Rev. Chair Upholstered with Leatherette seat
made up of 12 mm +/- 1 mm thick hot pressed Mr grad plywood and back in two
Pieces - 12 mm Rear Back and 6 mm inner Back. Moulded polyurethane foam used in
making seat with moulded density 45+/- 2 kg/m ³. Back is made out of 32 Density
Block Foam covered with 14 mm thick 32 density foam sheet (Block foam).Spine
bracket made of M.S plate 8 mm Thickness connecting back with mechanism. Armrest
top is soft touch polyurethane moulded of 250 to 300 density insert in chrome finish
pipe having unique "BIRD BEAK"shape. The mechanism of the chair have following
features: 360⁰ revolving type 3.5mm Thk CRCA seat plate with 4mm thk CRCA
channel plate synchro Mechanism, Tilt tension adjustable, Single position locking
Plastic component inside the mechanism of Grade - MI 3530 and Epoxy Powder coated Fourteen thousand six hundred
22 4.00 70 Microns with tested 1.2 lacs cycles as per BIFMA Standard.The chair provided with 14634.90 thirty four rupees and ninety Nos
pneumatic height adjustment which have have stroke of 100 mm +/- 5 mm.The five leg paise only
Base is made up of 38mm dia x 1.2mm thick tubular with 3.15 mm thick centre hub
CRC fabricated chrome finish. It have be fitted with 50 mm dia Twin wheel castor . The
size of the base have be - 660 +/- 1 mm pitch-centre-diameter. Load test as per BIFMA
compliance.The twin wheel castors made of Nylon injection moulded in black
colour.Overall dimensions of Chair have be, Width of Chair - 640 mm, Depth of chair
640 mm as measured from base below. Height of back from ground - min 1175 to max
1275 mm. Seat height -min 480 mm to max 580 mm. Dimensions tolerance / variations
have be within +/- 10 mm.
Dismentling steel work including distemperingand stacking the materials with all lead Three rupees and eighty five
and lift. paise only
Providing & Placing in position Operable Shutter For Wardrobe/Platfrom with Frame
for size 1200 X 2440 mm or anyLength with 1mm thick laminate finish outer side &
Inside 0.8mm thick inner laminate Finish in all shelf + shutter Back side & Shutter made
Five thousand five hundred
from 19mm BWP plywood of standard make like Century, Greenlam, Marine,
24 32.00 5574.24 seventy four rupees and Sq.M
Greenply, Saint-Gobain, Sainik etc, with edge finish in teakwood batten & Melamine
twenty four paise only
Polish on Batten Patti etc. complte,with all necessary tools & Accesories etc.
complete. as per instruction given by engineer in charge/Architect.
Providing and fixing Bed Mattress (L x W): 1.8 m x 0.92 m & 125mm thickMade Of Six thousand three hundred
25 14.00 Foam Standard Company wherever Required as directed by Engineer-in-charge with all 6334.82 thirty four rupees and eighty Nos
necessary Finishing etc. complete. two paise only
Providing and fixing Bed Sheet (L x W): 2.280 m x 1.07 m Made Of Cotton wherever Six hundred twenty seven
26 20.00 Standard Company Required as directed by Engineer-in-charge with all necessary 627.21 rupees and twenty one paise Nos
Finishing etc. complete. only
Providing and fixing Bed Cushion Cover (L x W): 0.30 m x 0.50 m Made Of Cotton
Two hundred fifty rupees and
27 20.00 Standard Company wherever Required as directed by Engineer-in-charge with all 250.88 Nos
eighty eight paise only
necessary Finishing etc. complete.
Providing and fixing Stainless Steel curtain rod of 25mm dia. with clamp and s.s. side
finitial fixed directly on wall with necessary screws and fixtures in line and level on wall Three hundred ten rupees and
up to 6.00mt. height etc. complete as approved and directed by engineer in charge. forty seven paise only
Providing Modern Arabian Style curtain including Standard Fabric+Black Out in Back
One thousand six hundred nine
Side+Channel+Sweiving +Press Of Curtain+Fitting all fabric hole covered with s.s ring
29 10.00 1609.84 rupees and eighty four paise Sq.M
as directed by Engineer-in-charge with all necessary tools & Accesories etc. complete.
Providing and fixing MINI ARCH DOUBLE SWING-BUCKET , L-6'5", W-3'5" ,H-6'5"
Twenty five thousand eighty
.using Galvanized Steel Pipe min. 1/1.25 inch Dia. M.S. pipe Powder Coated 100-110
30 2.00 25088.40 eight rupees and forty paise Nos
microns with Bucket Seat. same as instructed by EIC (IMAGE-4 ATTACHED)
Providing and fixing ROLLER SLIDE (BIG) ,L-16'0", W-2'0" ,H-7'0" .using Galvanized Sixty two thousand seven
31 2.00 Steel Pipe min. 1/1.25 inch Dia. M.S. pipe Powder Coated 100-110 microns with Bucket 62721.00 hundred twenty one rupees Nos
Seat. same as instructed by EIC (IMAGE-6 ATTACHED) only
Providing and fixing BUTTER FLY SWING ,L-6'6", W-4'6" ,H-6'6" .using Galvanized Steel Thirty one thousand three
32 1.00 Pipe min. 1/1.25 inch Dia. M.S. pipe Powder Coated 100-110 microns with Bucket Seat. 31360.50 hundred sixty rupees and fifty Nos
same as instructed by EIC (IMAGE-5 ATTACHED) paise only
Twenty six lakh twenty thousand one hundred fifty five rupees and forty six paise only
I / We am / willing to carry out the work at __________ above / below __________ percentage (should be written in figures and words) above / below the estimated amount mentioned above. Amount of my/our
tender works out as under.
Estimated Amount put to Estimated Amount put to
Deduct _________ % Below. Add _________ % Above.
Notes For Civil Work :-
1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3 GST and Income tax TDS will be deducted at a source while making payments of bills
In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date: 11/05/2017 as stated in S.O.R. therefore in
4 R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all
5 Credit of dismentled materials amount Rs.2,392.00 Deducted form 1st. R.A bill.
Deputy Executive Engineer Executive Engineer
Dated signature of the
Capital Project sub Division 3 Capital Project Division .1
Gandhinagar Gandhinagar
Credit of Dismantled Material
Quantities Estimated rates UNIT TOTAL AMOUNT
Quantities Estimated rates UNIT TOTAL AMOUNT
Item No Estimated but may Items of works ACCORDING TO
be more or less In Figure In words Unit ESTIMATED QUNATITIES
#REF! 104.00 Old Steel 23.00 Twenty three rupees only Kg
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
1 NIT.pdf
02 Notice Inviting Tender.pdf
04 SBD Book.pdf
05 Additional Instructions.pdf
06 Special condition.pdf
07 Schedule B.pdf
08 Index Specification.pdf
09 Specifiaction Details.pdf
10 Material Testing Schedule.pdf
11 List of Approved Make of Materials.pdf
12 Condition and GR.pdf
07 Condition and GR_11zon.pdf
05 Building Works P. No.101 to 126.pdf
06 Building Works P. No.127 to 152.pdf
07 Building Works P. No.153 to 176.pdf
08 Building Works P. No.177 to 192.pdf
01 Building Works P. No.001 to 026.pdf
02 Building Works P. No.027 to 050.pdf
03 Building Works P. No.051 to 076.pdf
04 Building Works P. No.077 to 100.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .