CA NO CWE BLY/ GE (E) /15 OF 2023-24 MAINT AND REPAIR TO ROADS AND ROAD FURNITURE IN MES COMPLEX AND DEPOT AREA AT RTS AND DEPOT UNDER GE (EAST) BAREILLY

Amount

Scarifying or picking graveled macadam or bituminous macadam surface in area exc 400 sqm and exc 50mm and n. exc 100 mm deep complete all as specified and directed.

M&L for 75mm thick (compacted thickness) water bound mecadam (WBM), with coarse aggregates (sand stone/lime stone) of grading 2 (63 to 40mm size), spread,rolled and consolidated to gradient, camber, level and super elevation with 8 to 12 tonne power roller, complete all as specified and directed.

M&L for repair to pot holes any depth, not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) and making good by applying tack coat with bituminous primer VG-10 @ 5 Kg per 10 Sq m, putting in premix bituminious macadam, well rammed and sealed with premixed sand seal coat (9.8 kg of binder with 0.09 Cum of stone chipping, 6.3mm size), again well rammed (including supply of premixed macadam, binder and chipping) depth of potholes exc 30 mm complete all as specified and directed.

M&L for Preparing water bound macadam top surfces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirts (up to 1.0 mtr from the edges of road both side) complete all as specified and directed.

M&L for applying evenly a priming/track coat with bituminous primer@10 kg per 10 Sqm using 80/100 paving bitumen VG -10 grading complete all as specified and directed.

M&L for Preparing of black top surface of road by brushing with brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with air pressure through air jet using air compressor to remove all loose dirt etc and applyhing evenly a priming/tack coat with bituminous primer at 5 kg per 10 sq metre VG-10 (paving bitumen) complete all as specified and directed.

M&L for Premix bituminous, macadam with binder content of 4% by weight of total mix using paving bitumen VG-30 grade, laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directed. Note:- (i) Aggregates for Bituminous works shall confirm to clause No 20B 2.5 of SSR 2009 Part-I (Specification)

M&L for bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5% binder content of paving bitumen (VG-30 grade) by weight of total mix, rolled and compacted, mixed in mechanical hot mixed plant and premixed material, laid with mechanical paver finished including rolling to required camber and gradient complete with 8 to 10 tone power roller to required compaction complete all as specified and directed. Note :(i) Design Mix for SDAC shall be carried out as specified in tender and the cost of testing shall be included in quoted rate. (ii) Aggregates for Bituminous works shall confirm to clause No 20 B 2.5 of SSR 2009 Part- I (Specifications)

S&F in replacement Cat eye,Solar reflective type of metal body alloy of size 100mmx100mmx20mm with PAMA striple reflector of model No 972.0 fixed with & including MS stud of suitable size as per manufacturers instructions complete all as specified and directed.

Supply and fix in replacement solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mmx125mmx25mm shank 65mm) of high efficiency mono crystafie solar panel 2.4V/0.3 watt one Ni-ed rechargeable battery (1.2V/1600MA) conssisting of super bright LED with 10,000 to 18,000 mcd completed as per manufacturerers insturction etc all as specified and directed.

S&F in replacement metal tubular delineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 50mm dia mild steel pipe of 1200 mm height, duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector redium tape of 25mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4(150x150x300mm) type B-1 complete all as specified and directed.

M& L for preparing bituminous surface of road and marking 2.5mm thick centre lines, dashes, arrows letter, marking etc and the like not exc 10 cm wide on new surface or previously treated road surface with hot applied retro-reflective thermoplastic road marking paint (white/golden/yellow) conforming to MORTH (Clause 803.4) all as specified with 8% glass beads using special applicator machine with heating arrangement upto 160°C including cleaning and drying the existing road surfaces to ensure dust, oil, grease and moisture free surfaces before applying the paint complete all as specified and directed.

M/S SATISH KUMAR JAIN

VERMA CONSTRUCTION CO