Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.8 LAccepted-AOC | L1 | Accepted-AOC Accepted as L1 | |
| 2 | L2₹25.9 L+₹40,975 (1.61%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹27.4 L+₹1.9 L (7.29%)Rejected-Finance FLAT NO 1 GURUKRUPA APARTMENT BEHIND TELEPHONE EXCHANGE DEHUROAD PUNE | PUNE | PUNE | MAHARASHTRA | 412101 | L3 | Rejected-Finance Rejected | |
| 4 | L4₹29.5 L+₹4.1 L (15.9%)Rejected-Finance | L4 | Rejected-Finance Rejected | |
| 5 | L5₹39.7 L+₹14.2 L (55.6%)Rejected-Finance | L5 | Rejected-Finance Rejected |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
17 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Dehu Road, Pune
GE Dehu Road, Pune
REPAIR TO JOINERY WORK AND CERTAIN B/R REPAIRS FOR MD/OTM ACCN OF ODTD UNDER AGE B/R (WEST) AT GE DEHU ROAD
2022_MES_559215_1
8689
Open Tender
Civil Works
Item Rate
180 days
GE Dehu Road, Pune
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE Dehu Road, Pune
₹90,000
Yes
12 Dec 2022
21 Oct 2022
22 Nov 2022
21 Oct 2022
17 Nov 2022
3 Nov 2022
60 days
Amount
Taking down chowkhats or frame with shutter (without taking off shutter from the frames) of wood, steel, aluminium etc, exc. 1.5 Sqm but n. exc. 4 Sqm each.
–Ditto- as item No 1 above but n.exc. 1.50 sqm each
Taking down shutters of any description exc 1 sqm but n. exc. 2 Sqm each.
Cutting holes in stone walls built in cement mortar for inserting hold fast/lugs & making good disturbed portion in CM 1:3 or cement congrete (1:2:4) type B-1 as required (Depth of embedded portion of hold fasts measured from the face of the jamb into wall exc half brick but no exc one brick.)
S&F for pressed steel door frames of size 105 X 60mm with one or more rebates incl necessary fixing lugs, hinges, lock strike plates complete as directed by Engineer-in-Charge.
S&F for pressed steel door frames of size 125 X 60mm with one or more rebates incl necessary fixing lugs, hinges, lock strike plates complete as directed by Engineer-in-Charge.
M/L for PCC 1:2:4 type B -0 (using 12.5mm graded aggregate ) in door frame filling complete as directed by Engineer-in-Charge.
S&F factory made 35 mm thick plain framed paneled shutter 2nd class hardwood (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with Commercial veneered on both faces the size of rail and style as per IS-1003 ( Pt-I) kiln seasoned and Chemically pressed.
S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauze / glass (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified.
S&F 30 mm thick, Flush shutter solid core construction with block board core & ply wood face panels commercial type on both sides complete as directed by Engineer-in-Charge.
Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge.
Supply and fixing 30 mm thick Fiberglass ReinforcedPlastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick S&F FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge.
Supply and fixing Factory made single extruded WPC (Wood Ploymer composite) solid plain flush door shutter 30 mm size comprising of virgin polymer of K value 58-60 (Suspension grade) calcium carbonate and natural fibres (wood polymer/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) and 900 N (Edge) minimum compressive strength 50N/mm square modulous of elasticity 850 N/mm square and resistance to spread of flame class A category with property of being termite / borer proof water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter shunk SS screws all as per direction of Engineer -in - Charge. (Note : Stainless steel butt hinges and necessary SS screws shall be paid separately
Supply & Fixing PVC door frame (50x47) mm made out of plain colour5 mm thick PVC Sheet re-in-forced with MS Square Tube, supplying & fixing in opening as per specification & drawing
S&F Factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.
M&L for preparation of new wooden surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a priming coat of Pink primer.
S&F aluminium anodised sliding window fully glazed fitted with one side visible glass of 5.5 mm thick shutter frame size 44x24x1.8 mm including chowkaht of size 80x40x1.8 mm and sliding fly proof shutter (using stainless steel wire cloth of gauge 0.50 mm dia and aparture 1.18 mm ) with three track including aluminium grill on out side throughout and providing necessary jointing cleats, glazing clips, ribber packing, anodised aluminium snap beading handle screw complete all as specified and as directed
S&F aluminum powder coated window shutters, sliding type three track without sash bars,aluminum section weighing not less than 0.55 Kg per RM with two glazed shutters and one fly proof shutter, including 3 mm thick sheet glass fixed to glazed shutter and stainless steel wire cloth 0.36mm normal dia of wire and1.4mm width of apperture fixed to fly proof shutter including necessary joining clits ,locking arrangements, glazing clips, rubber packing, alu. Snap beading , screws, aluminum fittings, suitable handles complete all as specified and directed by Engineer-in-Charge .
S & F aluminum powder coated frame for doors with one or more rebate inlcuding jointing cleats for fixing etc complete all as sepcified and directed.
S & F 5.5mm thick tinted glass fixed into aluminum frame complete all as specified and as directed
S & F in repairs pre-laminated particle board 25mm thick interior grade prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work incl leaping patti complete.
S&F in repairs Butt Hinges medium weight cold rolled mild steel 100 mm long complete .
S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21
S&F 250 mm Aluminum alloy, anodised , sliding door bolt with hasp and staple (BOLT TYPE) and fixing clips of sheet, cast orextruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed.
S&F 150mm long Aluminium anodized, barrel tower bolt of extruded section.
S&F 150mm long Aluminium handles cast type anodised
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainlesssteel wire staples .
S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainlesssteel wire staples .
S&F 3 mm thick sheet glass ordinary quality fixed in panes n.exc. 0.50 Sqm each pane and glazing with oil putty complete including Hacking out old broken glass (any thickness size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips
S& F 3mm thick figured glass, pin headed type and glazing with oil putty in squares not exc. 0.50 Sqm in each pane complete including hacking out old broken glass (any thickness size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips
Dismantling wall & ceilling boards(fibre pulp insulation etc) or insulation boards/ slabs/blankets, any thickness including cover fillets complete all as specified and as directed.
S&F Aluminium anodised snap grid false ceiling, for insulation and acoustic purpose, using standard aluminium sections of size 35.60 mm x 23.60 mm x 1.60 mm as in wall angle, 23.60 mm x 23.60 mm x 1.60 mm as in Main/ Cross Tees and 26.00 mm x 26.00 mm x 1.60 mm angles for grid of size 605 x 605mm suspended with 4mm dia. GI wire at intervals n.exc. 600mm centre to centre and fixed to roof truss with suitable size MS hooks and fastening bolts etc. from sloping/flat roof including 12 mm thick Gypsum ceiling boards of size 600mm x 600mm fixed with clips to aluminium snap grid including preparation of exposed surfaces of ceiling boards and applying two coats of acrylic emulsion distemper over a coat of primer all as specified and as directed.
S&F soild PVC wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification complete all as specified and as directed
S&F 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specifiaction complete all as specified and as directed by Engineer-in-Charge
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
M & L non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed or bedding layer in cement mortar (1:6) complete.
M & L non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match over 7 including 15 mm thick screed bed or bedding layer in cement mortar (1:6) complete.
M & L for Non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including backing coat 10 mm thick in CM (1:4) all as direced.
M&L for vitrified coloured tiles 10mm thick Light shade (square/rectangular) polished area of each tile n exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm th screed bed in CM (1:6) complete all as specified and as directed.
Ditto as per item No 41 above but on skirting with & including 10 mm th rendering in CM (1:4) complete all as specified and as directed.
M & L Glazed ceramic tiles in vertical surface 450mm x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles with & incl backing coat 10mm thick in CM (1:4) all as direced.
Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid and bedded and jointed in cement mortar complete all as specified and as directed.
M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade complete all as specified.
Demolition of brick or stone/boulder masnory, built in cement mortar.
M & L for brickworks with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6
M & L for 15 mm thick cement plaster on fair faces of brick work in cement mortor 1:4 including plastered surface shall be even and smooth without using extra cement finish completed all as specified and directed.
M&L for rendering cement plaster 10 mm thick in CM 1:6 on fair faces of brick walls finished even and smooth w/o using extra cement complete all as specified and as directed.
M & L for Preparation of newly plastered surfaces of wall and appling two coats of oil bound distemper on walls over a coat of primer on plastered surfaces complete including 3mm thick wall care putty complete all as specified and as directed.
M & L for Preparation of newly plastered surfaces of wall and appling two coats of cement base paint on walls over a coat of primer on plastered surfaces complete all as specified and as directed..
Dismantling water tanks and removing to store of capacity exc. 250 litres & n.exc 500 litres.
S & F 500 litres capacity rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe spouts for connecting inlet, outlet, over flow and washout pipes all as specified and as directed.
S & F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore and fixed (minimum weight 210 gms) complete all as specified and as directed.
S & F in repairs 15 mm dia stop valves cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union fixed in repair for 15 mm dia GI pipe all as specified and as directed.
S&F in repairs 15 mm dia bib taps fancy type long body chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe complete all as specified and as directed.
S & F in repairs 15 mm dia pillar taps fancy type cromium plated with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe complete all as specified and as directed.
S&F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15 mm dia all as specified and as directed by Engineer-in-Charge
S&F in repair Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed by Engineer-in-Charge
S&F 20 mm dia stainless steel medium grade curtian rod fixing in brackets including stainless steel brackets (02 Nos bracket) each in door/windows with side knob as specified and directed complete including fixing in any opening.
Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified.
M & L for 75 mm thick PCC type D-2 1:4:8 (40 mm graded aggregate) as in sub base for tiling complete all as specified and as directed
M & L for precast concrete interlocking paver block rubber moulded any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade with grey cement and pigment including 100 mm thick cement concrete Type D2 (1:4:8) (40 mm graded aggregate) and 25 mm thick sand cushion complete all as specified and as directed.
M & L for Chequered cement concrete tiles of 30 cm x 30cm x 25 mm thick with grey cement and pigment,set and jointed in neat cement slurry in floors including 100 mm thick cement concrete Type D2 (1:4:8) (40 mm graded aggregate) and 15 mm thick screed bed or bedding layers in cement mortar 1:6 for laying tiles complete all as specified and as directed.
Complete removal of existing treatment from old decorated surfaces of walls prepration of surfaces and applying one coats of premium acrylic smooth exterior paint with silicone additives on external surfaces of wall including primer and preparation of surfaces as per manufacturers instruction all as specified and directed by Engineer-in-charge.
M/L for taking out existing water proofing treatment including cement plaster(any no of layers) on roof surfaces, cleaning the surfaces and removing the debris outside MOD land and applying water proofing treatment as under :-(a) Rendering 10mm thick in CM 1:4 on concrete surfaces / slabs with admixture of integral water proofing compound as per manufacture instruction by weight of cement, levelling to receive water proofing treatment (WPC shall be measured & paid seperately) (b) Apply one coat of oil bituminous primer @ 0.20 kg/Sqm over concrete surface. (c) Laying 3mm thick APP Polimerised modfied membrane and weighing not less than 3.5 kg per Sqm by torch applicaton method. (d) The overlap for APP membrane shall be 75 mm on longitudinal direction and 100 mm on transverse direction. (e) Finally applying a coat of solar reflective (f) The make / treatment shall be from the one of the following manufacturer:-(i) 'Moply FP' of M/s Texsa (I) Pvt Ltd (ii) 'Hyperplast' pf IWL India Ltd. (iii) 'Super thermpay' manufactured by M/s Shalimar tar product. (iv) 'Hydroflame' of M/s Hydrotech Ltd.bitumiious aluminium paint @ 0.15 Kg/Sqm over the membrane.
Supply only Integral water proofing compound .
Dinesh Constructions
H S TAKHI
M/S SUGAM CONSTRUCTION
Shri Sant Cosntruction
M/S SURAJ A POUL
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .