PROVN OF OFFICE COMPLEX FOR TVDP AT COD DEHU ROAD UNDER GE DEHU ROAD

Amount

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in Soft/loose soil complete all as specified and directed.

Excavation in trenches n exc. 1.5m wide and not exc 1.5m in depth and getting out in hard / dense soil for foundation etc. complete all as specified and as directed by engr-in-charge.

Same as Item no 2 above but additional 1.5 m or part thereof in depth beyond the first 1.5 m and getting out hard Rock

M & L for Excavating over areas nexc 1.5m deep and getting out soft/loose soil all as specified and as directed.

M & L for Cement concrete type D2 1:4:8 using 40mm graded stone aggregate in foundations, filling and mass concrete.

M & L for Pre-cast cement concrete block masonry type C1 1:3:6 (20mm graded aggregate) set in CM 1:6 with solid blocks, exc. 10 cm in width and setting in mortar, complete

Forming 12 mm thick expansion joints for 100 mm thickness of concrete bed filled with preformed joints filled with preformed bituminous filler and top 30 mm primed and sealed with sealing compound , Grade 'A'

M&L for PCC type B1(1:2:4, using 20mm graded stone aggregate) as in edging/coping all as specified and directed.

M & L for 40 mm thick Cement Concrete 1:2:4 (using 12.5 mm graded stone aggregate) as in damp proof course (DPC) to horizontal or vertical surfaces including necessary form work and mixing of water proofing compound as per manufacturer’s instructions complete all as specified and directed. NOTE: - water proofing compound will be measured and paid separately.

Supply only Integral water proofing compound (WPC)

M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering

M&L for hardcore of gauge n exc .63 mm, broken boulders deposited, spread and levelled in layers n exc. 15 cm thick watered and rammed to a true surface complete all as specified and as directed by engr-in-charge.

M&L for 100 mm thick PCC (1:4:8) type D-2 using 40 mm graded stone agg in sub base of floor.complete all as specified and as directed by engr-in-charge.

M&L for 40 mm thick PCC (1:2:4) type B-0 using 12.5 mm graded stone agg in floor finishes. Complete all as specified and as directed by engr-in-charge.

M & L for Joint free Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.38 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile not exc. 0.11 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

All as per item No.15 above but on skirtings incl 10 mm th rendering in CM (1:4) complete.

M & L for Glazed ceramic coloured tiles of size 300 mm X 450 mm X 7 mm thick as on vertical surfaces such as skirting, dados and rises to steps etc. over 10mm thick screed bed in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on concrete block masonry finishing even and smooth without using extra cement with WPC .complete all as specified and as directed by engr-in-charge.

M&L for 10 mm thick rendering in cement mortar 1:6 on concrete block masonry with Sagol finishing even and smooth without using extra cement .complete all as specified and as directed by engr-in-charge.

Material & labour for preparation of new surfaces and & applying three coat of white wash complete all as specified and directed by Engr-in-charge.

M & L for Preparation of new previously plastered or unplastered surfaces of walls and applying two coats of oil bound distemper in approved colour/ shade over a coat of chalk whiting primer after preparation of surfaces complete.

M&L for preparation of newly plastered surface of walls and applying two coats of cement base paint complete all as specified.

S&F Rolled mild steel Fe-410-W(Gde- E-250) quality-A Roof trusses (framed) ,trussed, purlings, crane gantries, rails and fastenings and heavy bracket framing (Beam , tee, angle ) channel or flat sections ) including distance pieces , cleats all as specified and as directed.

S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Map as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Pre- painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Map as in roof ridges, fixed with self tapping screws as specified

M&L PCC (1:3:6) type C-1 using 40mm graded stone agg 75mm thick as in plinth protection finished even and fair without using extra cement. Complete all as specified and as directed by engr-in-charge.

Returning filling in including speading,leveling ,watering and well ramming in layer complete all as specified and directed by Engr-in-charge.

M&L removal of excavated Soil to a distance n exc 50m and depositing where directed.

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm.

M&L PCC (1:3:6) type C-1 using 20mm graded stone agg filling of pressed steel door frame complete all as specified and as directed by engr-in-charge.

S & F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engr-in-charge.

Supply & fixing Aluminium anodized tower bolt of 100mm long stove enamelled black with bright bolt complete all as specified and directed by Engr-in-charge.

Supply & fixing 300 mm long mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolts plate and two on couple plate and fixed complete all as specified and directed by Engr-in-charge.

S&F 100 mm long hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised all as specified

Supply & fixing Aluminium anodized handle oval type of 100mm long fixed with screw to shutter complete all as specified and directed by Engr-in-charge.

M & L for preparation and applying two coat of synthetic enamel paint on wooden surface over one coat of pink primer complete all as specified and directed.

M & L for providing pre-cast cement concrete landing, cover slabs (for man holes etc.), challah hoods, chajjas, water troughs, mangers, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate and setting in cement mortar 1:6 complete all as specified and directed.

Supply and fix for aluminium powder coated louvered ventilator with provision of exhaust fan using ‘Jindal” aluminium section or equivalent make as specified including frosted glass 3mm thick ordinary quality, frosted and GI wire mesh 0.36mm dia wire and 1.40mm aperture etc. complete all as specified and directed.

Supply and fix for aluminium powder coated three track sliding window with two glazed shutters, one 4mm thick plain sheet glass ordinary quantity and one shutter of GI steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc. complete all as specified and as directed. Catalogue numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer.

Supply & Fixing PVC door frame (50x47) mm made out of plain colour5 mm thick PVC Sheet re in forced with MS Square Tube, supplying & fixing in opening as per specification & drawing

S&F factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

M & L for Mild steel screw bolts (machine made) 11 to 15 mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long

M & L Mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes Fe 410-W (Gde-E 250) quality-A as specified and as directed.

M & L for providing reinforced cement concrete 1:2:4 Nominal Mix using 20 mm graded stone aggregate as beams ,cill concrete cantilevers, bressummers , lintel over 1.5 mtr span complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M&L formwork to side and soffits of floor or roof beam beam hauching, girder bressummers ,lintels cantilevers shelves including supports overhangs etc. also splays between floor and beams stc. complete all as specified and as directed.

M&L for TMT bar 10mm dia and over cut to length bend to shape required and binding with mild steel wire annealed not less than 0.9mm dia. complete all as specified and as directed by engr-in-charge.

M&L for TMT bar 6mm to 8mm dia as in stirrups cut to length bend to shape required and binding with mild steel wire annealed not less than 0.9mm dia. complete all as specified and as directed by engr-in-charge.

S & F Anodised Alu. snap grid (605x605)mm frame wk for false ceiling , providing M&L 9mm thick Acoustical board/tiles for insulation and acoustic purposes, (60x60) cm in size, fixed in celling with screws to frame work or with staples on snap grid, hangers 6 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat (40 X 3) mm size 60 mm long complete all as specified and as directed.

S&F 1000 Ltrs capacity PVC Rotational Moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layer hoisted and fixed in position all as specified.

M&L Supplying and laying of 20mm OD CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified

M&L Supplying and laying of 25mm OD CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified

S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed . ( Minimum wt 15 mm - 142 gms/20 mm - 210 gms)

S&F 25 mm dia of pipe Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed.complete all as specified and directed by Engr In Charge.

S & F for Vitreous China squatting pan (Orissa pattern) size 580mm X 440mm, white with integral foot rests, any pattern including provision of cement concrete bedding (excluding flushing cistern and flush pipe) complete all as specified and directed.

S & F for Vitreous China wash down water closet pan (pedestal pattern),any pattern including provision of cement concrete bedding (excluding flushing cistern and flush pipe) complete all as specified and directed.

S & F Vitreous China Half stall type urinals, white, with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe fixed with push taps (excluding of fixing supply pipe, flushing cistern, flush pipe, trap and waste pipe) complete all as specified and directed.

S & F for Wash Hand basins, Vitreous China, white, flat back, size 550x440mm, including cutting for and pinning in ends of brackets or erecting stand, angle bracket (but exclusive of fixing of supply, waste pipe, taps) complete all as specified and directed.

S & F PVC valveless, syphonic action type, 10 ltr flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, CP down pipe and connecting to the WC and making good to the floor with PCC all as specified and directed.

S&F bib taps 15mm dia fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed. complete all as specified and directed by Engr In Charge.

S&F 15mm dia stop valves , fancy type chromium plated, screwed down, screwed both ends for iron pipe or for unions and fixed. complete all as specified and directed by Engr In Charge.

Supply & fixing 15mm pillar taps fancy type, with capstan heads, chromium plated, screwed down , high pressure, with or without lettered 'Hot' or Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed. Bore of pipe in 15mm complete all as specified and directed by Engr In Charge..

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F for waste coupling of PTMT for 32 mm bore dia of discharge pipe (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms)

S&F PVC connections 15mm size with PTMT nuts of length 600mm

S&F urinal spreader of PTMT 15mm size with PTMT nuts of length 300mm complete all as specified and directed by Engr-in-Charge

S & F 32 mm dia PVC waste pipe 60 cm long all as specified

S&F PVC floor trap 75mm out let dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)..

M & L for Gully traps salt glazed stoneware (SGSW) square or round mouthed type 'P' of size 180x100mm for drain pipes complete all as specified and directed.

S & F 75 mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in trenches or in floors

S & F 110 mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in trenches or in floors

S & F 75 mm dia bore PVC (SWR) bends any radius

S & F 110 mm dia bore PVC (SWR) bends any radius

S & F 110 mm dia bore PVC (SWR) junction single 'T' equal or unequal

S & F PVC (SWR) 110 mm bore vent cowl

S & F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) fixing brackets complete all as specified and directed.

M&L for reinforced cement concrete pipes class NP-3 , laid in trenches & jointed complete with collars, dia of pipe 150 mm .

M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in bed to drain pipes, incl packing under & hauching against the sides of pipes after they are laid and tested for 150 mm bore RCC pipe.

M&L for brick work with sub class 'B' bricks straight or curved on plain exc. 6m mean radius built in CM 1:6

M & L for plain cement concrete1:2:4 (using 40 mm graded stone aggregate) as in surface channel or drain or benching in manhole complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex tra cement, including forms, moulds, mi- tred/stopped ends etc.

M&L Pavement Quality concrete (PQC) 100mm thk of minimum 28 days field flexural strength of 45kg/Sqcm or 4.5Mpa, aggregate gradation as per Table 3 of IRC 15-2017, coarse aggregate of clean, hard strong, dense, non-porous and durable pieces of crushed stone or gravel, fine aggregates of clean natural sand or crushed stone sand or combination of both using minimum 360kg/Cum of cement with non-circular virgin synthetic fibre of 12-18mm length, specific gravity 1.34 to 1.39, UV stable, alkali resistant with equivalent dia 15-40 micron, min melting temperature as 240c and min tensile strength of 300 Map and at the rate as specified by the manufacturer. PQC laid, spread and compacted with slip-form paver of minimum 7.50m width including curing and tinning by texturing cum curing machine complete all as specified and as directed. Required surface texturing to be done as specified in clause 10.1 14 and table 9 of IRC 15-2017.

M&L for casing capping point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 V grade confirming to IS 694 drwan through PVC casing capping of size heavy grade ISI marked including necessary casing capping with accessories, heavy duty PVC terminal including 1.5 mm PVC insulated FRLSH copper conductor as in continuous earth wire for:

(a) One Light / Bell point controlled by one switch .

(b) One fan point controlled by one switch

(c) One Bell point controlled by one switch .

Ditto-All as per item No-1 above but with 2.5 Sqmm wire for 5 Amp socket outlet.

(a) one 3 pin 5 Amps socket out let on independent board

(b) one 3 pin 5 Amps socket out let on same board

Ditto-All as per item No-1 above but with 4 Sqmm wire for 15 Amp socket outlet on independent board.

Supply and fixing of switch piano flush button single pole one way 6 Amps, 220 V. Make : Legrand,Crobtree,Havells

Supply and fixing of socket outlet 2 in 1,3 pin,5A flush type 220 V . Make : Legrand,Crobtree,Havells

Supply and fixing of Bell Push flash type,5A,single pole 220 V. Make:Legrand,Crobtree,Havells

Supply and fixing of socket 5A/15A-2/3 pin combined flush type 220 V .Make : Legrand,Crobtree,Havells

Supply and fixing of switch outlet 2 in 1,3 pin,5A and 15Ampa flush type 220 V .Make : Legrand,Crobtree,Havells

Supply and fixing of Ceiling rose, surface Bakelite, 65mm x 50mm two to three terminals.Make : Legrand,Crobtree,Havells

Supply and fixing of Electronics dimmer piano switch type 450 watts,220 volt flush type. all as specified and directed .Make : Legrand,Havells,Khaitan

Supply and fixing of PVC rectangular block for mounting,switches,sockets, fan regulator etc with 3mm thick plastic laminated sheet cover of size 100 mmx 100mm and 50 mm deep.

Supply and fixing of PVC rectangular block for mounting,switches,sockets ,fan regulator etc with 3mm thick plastic laminated sheet cover of size 175 mmx 100 mm and 50 mm deep.

Supply and fixing of PVC rectangular block for mounting,switches,sockets, fan regulator etc with 3mm thick plastic laminated sheet cover of size 200 mmx 150mm and 50 mm deep.

Supply and fixing of buzzer, Ding Dong AC 230 volts single pole. Make.

M & L submain wiring with two single core through PVC insulated unsheathed stranded copper conductor 4 sqmm (nominal area) drawing through PVC conduits concealed and 4 sqmm stranded copper conductor cable PVC insulated and unsheathed (green colour) 1100 volts grade for earth continuity conductor and connecting with main earth dolly(Note : Cutting chases for conduit and sinking"s for boxes and making good to walls ,floors etc for sub main wiring will be measured & paid separately in respective items).

All as per item no 15 herein before but of size 2X2.5 sq mm and 1X2.5 sqmm

Supply and fixing of Ultra Slim recess mounted Edge Lit LED module with high brightness LED package and Unique pattern acrylic de-glaring diffuser sheet for glare free uniform light distribution suitable for Armstrong / grid ceiling of 36WLED complete all as directed. Make:-Havells,Bajaj,Philips ,Crompton

Supply and fixing of Inverter LED batten 20 watt with square profile and polycarbonate channel. Lithium Ion battery with charging time 8 hours -10 hours and back up time upto 4 hours..Make:-Havells,Bajaj,Philips, Crompton

S & F Loadline Distribution board, TPN vertical ,with Bus bars,Netural links,blanking plates ,single door 12 way, with provision for MCCB as incommer and SP/TP MCB as outgoing and electrically connecting up complete all as specified and directed.,Make : Havells /L&T/ Legrand

S & F MCB SP 6 to 32 Amps 240 volts 50 HZ having 10 KA complete.Make : Havells/ L&T/Legrand.

S & F MCB SPN 40 Amps 240 volts 50 HZ having '10 KA complete.Make : Havells / L&T/Legrand.

S & F MCCB ,TPN,415 Volt AC 50HZ -63 Amps , adjustable braking capacity 16KA complete all as directed. Make : L&T/ Havells /Legrand.

Supply and fixing of ceiling fan complete with blades, down rods,electronic regulator and accessories,230 volt,1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC)

Supply and fixing of Exhaust fan made with sturdy engineering plastic complete and accessories,230 volt,50 Hz,rpm 1200 copper winding of sweep 250 mm.

Vastushilpa Contrustion

M/S OMKAR DEEPAK DHAVAN

KARPE AND SONS CONSTRUCTION