18 /EE/PMD/PHED OF 2024-2025/SL8

Amount

Vertical electrical sounding using resistlvity meter to get parameter in terms of depth and discharge including cost of transportation of machine and tools, plants, to site including the shifting the machine and plants in different points in following sites and submission of 03 copies of date collected from each site for analysis and interpretation of VES data including analysis of data and interpretation of layer parameter and report preparation on ground water availability a) short sounding for less than a deprh ot 200 mtr from G.L For 01 no Pin Point Site -03 nos Test, For 01 nos Pin Point Site lx 3 NOS Test

RBTW and allied works :- Mobilisation and transportation of the Rig machine and its accessories and others materials etc to the site.

Drilling a bore hole in DTH process through any kind of soils and rocks in overburden suitable for lowering and fitting fixing of 200 mm outer dia casing pipe(casing pipe may be supplied departmentally) up to an average depth of 25±5 mtrs. and subsequently 165 mm diameter boring through any kind of rocky formation upto a total depth of 170 mtrs (for dry drilling or sufficient water not achieved drilling may be continued up to 200 Mtr) including all other works necessry for boring and lowering fitting fixing of MSERW /UPVC casing pipes suitable for 165mm dia drilling in rock bed and grouting the same as per direction of E.I.C .including (in case of MSERW casing pipes) the cost of welding of M.S.E.R.W casing pipes and welding the top of the casing pipe with one 8mm thick MS cover plate(with supply and delivery of that plate) Necessary arrangement to be made for proper security of bore hole. (Rates are inclusive of all materials necessary for drilling works) a) 0 to 25 Mtrs/Over burden which one is more

b) 25 mtrs/over burden to 170 Mtrs or above

Supply & delivery of 200 mm nominal dia UPVC casing pipe ( minimum wall thickness 10 mm ) having 3.0 meter length each, both end threaded and one end socketed as per direction of EIC and as per IS:12818-2010 Make- PHED Approved Make NB- Material to be supplied as per requirement of site

Washing and devoloping tube well with air compresssor pump and engine for 8 (eight) hours contineous pumping per day with necessary arrangements for testing the yield in gallon per hour with V notch including hire and labour charges for all tools and plants scaffolding as required.

Pump-motor set and allied works :- Supplying,installation and lowering in position solar panel based AC/DC submersible pump capacity 1 HP, 12/13/14/16/18 stage ,32 mm dia outlet dia (preferably oil filled) KSB/Crompton or renowned brand duly approved by MNRE including all GI fitting (elbow,nipple,adopter),PVC union,PVC rope, CI bore cover etc as required.

Top gate with locking arrangement as per direction of EIC Making suitable size tubewell foundation guard 1mtr x 1mtr as required dimension with supplying of necessary cement, brick sand and stone chips including plastering and net cement finish complete masonery work and hinge MS fabricated

Supplying and fixing of AC 3 core flat submersible cable of 2.5 sq mm.

Supplying and fixing af DC solar cable single core 4 sq mm.

S/D 3 mtr long 40 mm dia 4 mm thick UPVC standerd both side theaded and one end type column pipe with side socketed with registered KPMG.

Add GST @ 18%

Add CESS @ 1%

RABINDRA NATH KHAN (BID ID -6299475)

PROGRESSIVE ENGINEERS CO OPERATIVE SOCIETY LIMITED (BID ID -6297175)