Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.5 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹20.9 L+₹36,254.10 (1.77%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST BIDDER | |
| 3 | L3₹22.1 L+₹1.6 L (7.59%)Rejected-Finance | L3 | Rejected-Finance NOT LOWEST BIDDER | |
| 4 | L4₹24.2 L+₹3.7 L (17.9%)Rejected-Finance SPECIAL 1 INDUSTRIAL ESTATE NEW POWER HOUSE ROAD JODHPUR 342003 | JODHPUR | RAJASTHAN | 342003 | L4 | Rejected-Finance NOT LOWEST BIDDER |
Tender Value
₹20.1 L
EMD Value
₹60,420
Closing Date
9 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer, Banar
Garrison Engineer, Banar, JodhpuR-342027
PROVN OF CERTAIN SANCTIONED WORKS IN INSIDE DEPOT AREA AT AA BANAR UNDER GE BANAR
2023_MES_627106_2
8823/58/E8
Open Tender
Civil Works
Item Rate
180 days
Banar
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Garrison Engineer, Banar
₹60,420
Yes
15 Feb 2024
14 Dec 2023
11 Jan 2024
14 Dec 2023
9 Jan 2024
21 Dec 2023
Amount
Surface excavation not exc. 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified.
Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out any type of soil complete all as specified.
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returing, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm watering and removing surplus soil to a distance n exc 50m and making and removing surplus soil to a distance n exc 50m and making good surface in hard/dense soil complete all as specified.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified.
Removing excavated material n.exc. 50 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified.
M&L cement concrete 1:4:8 type D2 (40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified.
Use & waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat and rough finished surfaces of concrete complete all as specified.
Use & waste formwork to sides of pillars, posts, struts, piers, columns, and stanchions square, rectangular or polygonal and rough finished surfaces of concrete complete all as specified.
Use & waste formwork to sides and soffits of floor or roof beam, beam hauchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc flat and rough finished surfaces of concrete complete all as specified.
Use & waste formwork to edges of concrete flats, treads breaks in floors, window cills, concrete rallings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20 cm wide and rough finished surfaces of concrete complete all as specified.
Use & waste formwork to chullah hoods, chajjas, troughs and similar items including edges and rough finished surfaces of concrete complete all as specified.
Use & waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping) flat and rough finished surfaces of concrete complete all as specified.
M&L for RCC (design mix) M-25, using 20 mm graded stone aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified.
M&L for RCC (design mix) M-25, using 20 mm graded stone aggregate in columns, pillars, piers, posts and struts complete all as specified.
M&L for RCC (design mix) M-25, using 20 mm graded stone aggregate in beams, cantilevers, bressumers, lintels over 1.5m span complete all as specified.
M&L for RCC (design mix) M-25, using 20 mm graded stone aggregate in chajjas complete all as specified.
M&L for RCC (design mix) M-25, using 20 mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.
M&L mild steel TMT bars in reinforcement 10mm dia and over cut to length bent to shape required including cranking binding spirally, hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified.
M&L mild steel TMT bars in reinforcement 5mm dia and over up to 10mm dia in stirups cut to length bent to shape required including cranking binding spirally, hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified.
M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, modular bricks in cement mortar built in CM 1:6 complete all as specified.
M&L for Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, modular bricks in cement mortar built in CM 1:6 complete all as specified.
M&L for rendering 15 mm thick on brick masonry surfaces or surface other than fair face of brick work or on one side of lathing in CM 1:6 is to be finised even and smooth (without using extra cement) internally complete all as specified.
M&L for two coats of oil bound distemper on newly plastered walls over a coat of 2mm thick wall care putty over plastered and priming plastered and other surfaces with alkali resistant priming paint including preparation of surfaces complete all as specified.
M&L for 15mm thick rendering in CM 1:4 mixed with WPC on fair faces of brick work or concrete surfaces of wall complete all as specified. Note:- WPC shall be measured and paid separately.
Material and labour for preparation of newly plastered surface of walls and applying two coats of cement base paint over one coat of alkali resistance primer complete all as specified.
M&L for integral water proofing compound in external plastering complete all as specified.
M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying three coats of white wash complete all as specified.
M&L for 75mm thick Cement concrete for sub base type D2, 1:4;8 (using 40 mm graded aggregate) complete all as specified.
M&L 25 mm thick Cement concrete for sub base B-1, 1:2:4 (20mm graded aggregate)complete all as specified.
M&L for machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20mm thick screed bed of CM 1:6 layer in floor finishes complete all as specified.
All as per item No 30.00 above but as in skirting over & incl 10mm thick rendering in CM 1:4 complete all as specified.
M&L for Non skid ceramic colour tiles (300 x 300 mm) x 7 mm thick in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick bedding of CM 1:4 layer in floor finishes complete all as specified.
M&L for coloured Glazed ceramic tiles in vertical surface 350x250x7mm/450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles in vertical surface including 10mm thick rendering in CM 1:4 complete all as specified.
M&L for Hardcore of gauge n exc. 63mm (broken stone or boulders), deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified.
M&L 50 mm thick PCC (1:3:6) type C1 (by using 20mm aggregate) in plinth protection complete all as specified.
M&L Stone Slab 25 mm to 35 mm thick dressed true and square in one length not less than 60 cm and n exc 120 cm in copings, window cills, chajjas, sunshades, plinth protections etc, punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edges rounded or chamfered as directed, set, jointed and pointed in cement mortar 1:4 complete all as specified.
M&L for pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified.
M&L for PCC (1:2:4) type B-0, using 12.50mm aggregate in filling pressed steel frame, complete all as specified.
S&F flush shutters 30 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.
S & F second class hardwood for Glazed and skelton shutters 30mm th, open rebated and prepared to receive glass, guage, etc (without sash bars) edges of framing plain chamferedor rounded, fitted with cut and mitred beds for securing glass, etc sizes of members of shutters as specified in SSR-I Sec 8, clause 8.20(a) supplied and fitted to chowkats complete all as specified.
M&L for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink preimer complete all as specified.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.
M&L for 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified.
S&F aluminium alloy, anodised, sliding door bolt with hasp, staple 250 mm long (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.
S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor (140mm size) complete all as specified.
S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified.
S&F 150 mm long Extruded aluminium alloy handles, fabricated type., anodised complete all as specified.
M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification complete all as specified.
M&L Factory made solid panel of PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified.
S&F aluminium anodised, barrel tower bolts 100mm long of extruded section and fixed complete all as specified.
S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified.
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded as specified including repairs to jambs in cement mortar with side hung shutters complete all as specified.
Ditto, all as per srl item No 52.00 above but without glazing bars.
S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified.
S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified.
S&F sheet glass 4 mm thick, ordinary quality and glazing with oil putty or wooden beads supplied with shutters in square n.exc 0.5 sqm in each pane complete all as specified.
S&F sheet glass 4 mm thick, figured glass, pin headed type and glazing with oil putty or wooden beads supplied with shutters in square n.exc 0.5 sqm in each pane complete all as specified.
S&F mild steel of grade Fe-290 (Grade E-165) in framed work such as grills, grating etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar works complete all as specified.
M&L two coats of synthetic enamel paint over a red oxide primer including prepration of newly treated steel surfaces of girth exc 10cm complete all as specified.
S&F 15mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors complete all as specified.
S&F 20mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors complete all as specified.
M&L for vitreous china wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified.
M&L for vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified.
M&L for PVC valveless, syphonic action type, flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and including flushing pipe 32 mm dia of bore, high density polyethylene pipes of pressure rating 6 kg/sqcm complete all as specified.
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified.
M&L for 15mm dia of bore cast copper alloy stop valves, fancy type, chromium plated, screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified.
S&F 15mm Pillar taps, cast copper alloy, with capstand heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15 mm size pipe complete all as specified.
S&F PVC waste pipe 32mm dia complete all as specified.
S&F 15mm dia bib tap cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified.
S&F15mm dia stop valves, screwed down high pressure, screwed both ends for iron pipe or for unions and fixed for 15mm bore but fancy type, chromium plated with long shank and cup (concealed type) complete all as specified.
S&F brass chromium plated shower rose 125mm size complete all as specified.
M&L for 110mm PVC (SWR) pipes, single socketed, in any length, with rubber rings joints, laid in trenches or in floors complete all as specified.
M&L for 75mm PVC (SWR) pipes, single socketed, in any length, with rubber rings joints, laid in trenches or in floors complete all as specified.
M&L for 75mm dia of bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified.
M&L for 110mm PVC (SWR) bends any radius complete all as specified.
M&L for 75mm dia PVC (SWR) vent cowl complete all as specified.
S&F 110mm PVC (SWR) ''P' trap complete all as specified.
S&F aluminium anodised tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified.
S&F Stainless steel peg set of 5 size 300x25 & 2mm thick complete all as specified.
M&L Salt-glazed stoneware gully traps, square or round mouthed, type 'P' and size 150x150mm complete all as specified.
S&F purpose made brackets of trade/standard pattern suitable for 20 mm dia decorative/fancy type curtain rods.
S&F decorative finials (round type with mirror optic finish trade/standard pattern suitable for 20 mm dia decorative/fancy type curtain rods.
S&F ISI marked 500 Litre capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm brass ball valve high pressure complete all as specified.
M&L for PCC 1:3:6 type C2, using 40mm graded stone aggrgates as in platform to PVC water tanks complete all as specified.
M&L 40 mm thick (average) cement concrete 1:2:4 mix type B-0 (12.5 mm graded stone aggregate) in roof padding finishing surface of concrete topping even and fair (without using extra cement) in slope 1:40 over roof complete all as specified.
M&L for 10mm thick plastering in CM(1:3) on concrete roof surfaces with water proofing compound @ 3% by weight of cement and finishing the surface even and smooth without using extra cement complete all as specified. Note :- WPC shall be measured and paid separately.
M&L for painting roof surfaces with one coat of bitumen primer T-10 polymerised grade conforming to IS-3384 @ 0.30kg /Sqm and one coat of bonding material using blown type bitumen confirming to IS-702 grade 85/25 @ 1.20 Kg/Sqm, APP membrane laying of 3mm thick and weight not less than 3.50 Kg/Sqm with 10cm side overlap having centre core of 100 micron HMHDPE, outer film is 20 micron each and applying one coat of bonding material using blown type bitumen confirming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm complete all as specified.
Material and labour for square rubble walling Jodhpur type regular course well bonded bedded and solidly hearted built in cement mortar (1:6) complete all as specified.
Extra over on stone walling for hammer dressing to face stone with maximum depression on face from straight edge n.exc 20mm and dressing faces beds and joints as specified to square rubble walling regular course Jodhpur type complete all as specified.
M&L for structural steel in roof trusses (framed) trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, columns, cleats etc)
S&F Joist channel angle, or tee sections, fixed independently, without connections plate etc Fe-410W (Gde E-250) quality A (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified.
S&F Rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates Fe-410W (Gde E-250) quality A complete all as specified.
M&L for plates (plain or chequered Fe-410 Gde-250), quality A, channesl, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified.
Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut n exc 5 cm long dia of shank 5 to 10mm complete all as specified.
M&L for Sand filling under floor including watering and consolidation 25 mm thick complete all as specified.
M&L for glossy finished machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness M 35 grade with white cement glossiness in pigments and laid in position/pattern complete all as specified.
M&L for pre-cast concrete block as in Kerb Stone (Machine made) with solid blocks Type B1, 1:2:4 (20mm graded stone aggregate) exc 10 cm in width and setting in cement mortar 1:4 complete all as specified.
M&L 40 mm thick PCC (1:2:4) type B1 (by using 20 mm graded aggregate) in floor finish and finishing cement concrete surface even and smooth without extra cement complete all as specified.
M&L PCC (1:4:8) type D2 using 40mm graded crushed stone aggregate in concrete bedding to drain pipes, including packing under and haunching against the sides of pipes after they are laid and tested complete for 150mm bore pipe complete all as specified.
M&L reinforced concrete pipes 150mm bore, class NP-2, laid and jointed complete all as specified.
M&L Precast cement concrete block masonary with solid block of (1:4:8) type D2 exc 10 cm in width & setting in cm (1:6) complete all as specified.
M&L Cement concrete (1:2:4) type B1 using 20 mm graded crushed stone aggregate in surface channels or drains and benching including finishing the top of benching even and smooth using extra cement complete all as specified.
M&L Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred /stopped ends etc complete all as specified.
Add to Srl item No. 106.00 above for each 25mm girth or part thereof over 30cm.
M&L Mild steel work conforming to Fe-290 Gde E-165 in flat iron and similar small articles.
M&L Rendering 10 mm thick on block masonary walls In cm (1:4) mixed with WPC as per manufactures instructions. (Note : WPC shall be measured and paid sepately)
M&L rendering 5 mm thick in cement mortar 1:4 on caling/roof projection/chajja complete all as specified.
M&L for PCC 1:2:4 type B-1 as in coping incl necessary form work.
Construction of RCC Hume Pipe septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for 10 Users complete all as specified as per Drawing No CEJZ/STR/STD/18/2016
Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.4m dia X 3.00 m effective depth as per Drawing No CEBZ/TD/76/2011 dt 01 Aug 2011
M&L for point wiring of One light point controlled by one, One-way switch complete with any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked, in PVC rigid conduits heavy duty ISI marked totally concealed in wall/floor/roof including all accessories etc. with sunken boxes suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to common earth dolly complete all as specified for the following:-Note- (i) Cutting in chases and pointing in will be done by contractor without any cost. (ii) Making good of distrubed surfaces matching with existing finishes will be done by contractor without any extra cost.
One fan point controlled by one, One-way switch complete all as specified.
One 5 pin 5Amp Socket outlet point on same board with other switches including earth wire.
One 5 pin 5Amp Socket outlet point on independent board complete all as specified.
All as per item No above 114.00 but with 2.5 Sq.mm(Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked, including PVC insulated stranded copper conductor 2.5 Sqmm single core cable as earth and connecting to common earth dolly complete all as specified for one 15 amps socket outlet point on independent board. Note:- Making good of disturbed surfaces will be done by contractor without any claims.
S & F piano flush type switch 5 Amps single pole all as specified.
S & F multipurpose socket outlet with piano flush type 3 pin 5 Amps all as specified.
S & F piano flush type switch 15 Amps single pole all as specified.
Socket outlet 2 in 1, 3 pin, 6 and 16 amp flush type all as specified.
S&F ceiling rose surface type three terminals complete all as specified.
Supply and fixing Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified.
S & F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.
Supply and fixing Earthing complete with GI earth plate eletrode 60 cm X 60 cm X 6.0 mm thick barried directly in ground vertically to a depth note less than 2.25 metres below ground level with top edge of earth plae at a depth note less than 1.5 metres below level ground, connected to GI iron or steel earth wire 4 mm dia (8 SWG) by means of nuts , bolts checks nuts,washers and earth wire protected by GI iron pipe 15 mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, pre cast RCC coverslab 30cmX30cmX10cm with one lifting handle made of 8mm dia ms bar funnel wire mesh, 20mm bore GI or steel pipe medium grade for watering, charcoal or coke and salt in alternate larges, necessary excavatin and earth work in any type of soil complete all as shown electrical plate No 3 of MES schedule part-I and testing after completion.
M & L for Sub main wiring (concealed) complete with two single core 2.5 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 2.5 sqmm in and including PVC casing caping and accessories complete all as specified. (Note:- (i) Making good of disturbed surfaces will be done by contractor without any claims. (ii) 3 runs of 2.5 Sqmm conductor and one run of PVC casing caping shall be measured as one unit length.) complete all as specified.
S&F MCB SPN DB 8 way, double door, with 200 amp rated busbar 240 V, complete all as specified.
Supply and fixing MCB SP 6-32 Amp 240 Volts. 10 K complete all as specified.
MCB SPN 32 Amp 240Volt 'C' series 10KA complete all as specified.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star with service value 6.00 BEE. Five star rated with brushless direct current motor. (BLDC) complete all as specified.
S & F LED lights fitting 1x 10W, 220V, AC decorative/mirror type type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply and Fix LED lamp 12 Watt, 220V complete all as specified.
Supply and Fix LED lamp (Inverter type) 12 Watt, 220V complete all as specified.
Drilling of water pipe line of any type and size upto 100 mm size for connection of 25/20 mm GI pipe with clamp and other assesries complete all as specified.
Supply and laying 20 mm bore GI tubing medium grade with all fittings and fixed complete laid in trenches/fixed to walls (including clamps)/fixed on pillars etc complete all as specified.
Supply and fixing 20 mm bore Gun metal Globe or Gate valve with iron wheel head, screwed both ends for iron pipe, non rising forged brass spindle class I and fixed with required necessary GI fittings complete all as specified.
M&L construction of Brick Masonry Valve Pit of size 1500x 1500 x 1500 mm (Internal Dimension) one Brick thick wall in cement mortar 1:4 on 100mm thick PCC 1:4:8 (40mm graded aggregate) in Foundation, Rendering 15mm thick internally and externally upto 150mm below GL, providing 3.0mm thick MS Sheet Valve Pit Cover, welded with 40X5mm Flat Iron Frame alround including provision of Hinges, Handle and Locking Arrangement and 40 x 40 x 6mm Angle Iron Frame fixed on Top of Valve Pit by means of Holdfast 150mm long, embedded in PCC 1:2:4 (20mm graded aggregate) Block of size 230 x 200 x 100 mm, applying two coats of Anti-corrosive Paint over a coat of Red Oxide Zinc Chrome Primer after preparation of all exposed to Steel Surfaces including necessary Earth Work in Soft/Loose Soil and demolition of old unserviceable Valve Pit of following sizes complete all as specified.
M&L for clean, dry sand in trenches/ducts for cushioning to cable complete all as specified.
Supplying and laying PCC cable cover, flat, class LV, type 2 of size 300mm x 180mm x 40mm complete all as specified.
Supply laying and testing cable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with standed allumiuium conductor of size 10 sqmm 2 core complete all as specified.
Supply and lay galvanised medium grade including fitting 40 mm dia with all fittings laid in trenches/floor complete all as specified.
AJEET ENTERPRISES
Bhawani Enterprises
INDO CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .