Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L.1₹49.9 LAccepted-AOC HIMACHAL PRADESH | SHIMLA | HIMACHAL PRADESH | 171002 | L.1 | Accepted-AOC lowest bidder | |
| 2 | L.1₹74.2 LRejected-Finance P O SATOG TEHSIL THEOG DISTT SHIMLA | SHIMLA | SHIMLA | HIMACHAL PRADESH | L.1 | Rejected-Finance highest bidder |
Tender Value
₹51.4 L
EMD Value
₹83,912
Closing Date
24 Jun 2022, 10:20 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
DFO Nachan
Nachan Forest Division at Gohar
Construction of RO Office-cum-residence
2022_FD_61687_1
2680A
Open Tender
Civil Works - Buildings
Item Wise
150 days
Gohar
Please refer Tender documents.
9 documents required · 9 mandatory
₹2,000
Yes
DFO Nachan
₹83,912
Yes
13 Sept 2022
13 Jun 2022
24 Jun 2022
13 Jun 2022
24 Jun 2022
14 Jun 2022
13 Jun 2022 - 13 Jun 2022
120 days
Amount
Site Development:- Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil.
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.
Providing and laying in position cement concrete of specified grade excluding the cost of centering andshuttering - All work up to plinth level.1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size)
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggrigate 25 mm nominal size) up to plinth level with:-Cement mortar 1:6 (1 cement : 6 coarse sand).
Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like.(A) Cement mortar 1:6 (1 cement : 6 coarse sand).
Main Building:-Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
Providing and laying in position cement concrete of specified grade excluding the cost of centering andshuttering - All work up to plinth level. 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size)
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggrigate 25 mm nominal size) up to plinth level with:-Cement mortar 1:6 (1 cement : 6 coarse sand).
Centering and shuttering including strutting, propping etc. and removal of form for :Foundation, footings, based of columns, etc, for mass concrete
columns, pillars, piers, abutments, posts and struts
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
Suspended floors, roofs, landings, balconies and acess platform.
Edge of slabs and breaks in floors and walls:-under 20 cm wide
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and superstructure.Mild steel and medium tensile steel bars.
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size)
Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):-With modular bricks.
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand)
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener be paid for seperately). Sall wood.
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all comlete.Fixed to openings/ wooden frames with rawal plugs srews etc.
Steel work welded in built up section/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads, landings etc. of stair cases, including use of chequered plate whereever required, all complete
Providing and fixing hand rail of approved size by welding etc. to steel ladder railling, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. 10.26.1 M.S tube
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in positin and applying a priming coat of approved steel primer all complete.
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 qm/sqm.
Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 qm/m2
Providing and fixing M.S. BP sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (Base members of steel work shall be measured & paid separately)
Providing and fixing 15 cm wide, 45 cm overall semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complet. 0.63 mm thick with zinc coating not less than 275qm/sqm.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm dia mtr.
Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperately). 6 mm thick cement fiber board as per IS: 14862.
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 mtr. And lift upto 1.50 mtr.
Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete. 6 mm thick cement plaster of mix.
1:3(1 cement:3 sand), 6 mm thick cement plaster.
15 mm cement plaster on the rough side of single or half brick wall of mix:In cement Mortar 1:6.
Providing and fixing skirting with Pre-laminated medium density fibre board exterior grade (Grade-I) conforming to IS: 14587:1998 marked, with (one side decorative and other side balancing lamination and edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. all complete. 18 mm thick.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of tiles 600x600 mm.
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of tiles 500x500 mm.
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in charge.(Butt hinges and necessary screws shall be paid seperately). Second class teak wood, 35 mm thick shutters.
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary srews. 35 mm thick shuttering work ISI marked MS pursed but having bright finishing required. size. Second class teak wood
Providing and fixing glass panes with putty and glazing clips/wooden beadings in steel/wooden doors, windows, clersestory windows, all complete with:5.5 mm thick glass pans
Distempering with oil bound distemper of approved brand. New work (two or more coats) over and including water thinnable priming coat with cement primer. Finishing walls with Acrylic Smooth exterior paint of required shade
Distempering with acrulic smooth exterior paint. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).
Applying priming coat:With ready mixed pink or Grey primer of approved brand and manufacture on wood work (Hard and soft wood)
Finishing with Deluxe Multi surfacenpaint system for interiors and exteriors using prime as per manufacturers specifications:
Finishing with Deluxe Multi surfacenpaint system for interiors and exteriors using prime as per manufacturers specifications:Painting Steel work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.80 ltr/10 sqm of approved brand and manufacture
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete.300x16mm
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour orshade, with necessary srews etc. complete. 200x10mm
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125mm
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screwsSingle rubber stopper.
Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:125x63x4 mm.
Providing and fixing MS pipe curtain rods with nickel plated brackets:20 mm dia (heavy type)
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
Constructing Coursed rubble hammer dressed "U" Shape open surface drain with side wall 15x22 cm in cement mortar 1:6 (1 cement : 6 sand) and inside plastering with cement mortar 1:3 (1 cement : 3 sand) including earth work and laying 10cm cement concrete 1:5:10 (1 cement : 5 sand : 10 graded stone aggregate 40mm nominal size) and 7.5 cm. cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) and finished with a floating coat of neat cement complete as per standard design.
Providing and fixing at all height wall panelling with phenol bonded Bamboo mat board conforming to IS:13958-1994 including providing and fixing to frame work made of 50mmx50mm hardwood plugs including cutting brick work and fixing in cement mortar and making good the wall etc and also providing and fixing woden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws all complete as per direction of Engineer-in-Charge. 1&2 mfmix itnhgicknienss position
Providing and fixing 25mm thick pre-laminated medium density fibree board exterior (grade-I) IS:14587:1998 marked with one side decorative and other side alancing lamination for cupboard shutters edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickel plated bright finishing MS piano hinges conforming to IS:3818 marked with necessary screw etc. all complete.
Providing and laying 60 mm thick factory made cement concrete interlocking paber block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-In-Charge.
Roof rain water harvesting tank)Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.
Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete.
Providing and laying in position cement concrete of specified grade excluding the cost of centering andshuttering - All work up to plinth level.1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size
1. Centering and shuttering including strutting, propping etc. and removal of form for : 2. Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. 3. Extra for shuttering in circular work (20% of respective centering and shuttering items):- Circular or curved in plan.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and superstructure. Mild steel and medium tensile steel bars.
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size).6 mm thick cement plaster in ceiling of mix:-
6mm thick cement plaster. In CM 1:3 (1 cement:3 fine sand).
P/F of net /jali in inlet of down pipe.
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm dia mtr PVC inlet pipe from gutter down pipe to tank.
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 25 mm dia nominal bore.
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.20 mm dia nominal bore from tolu pump to PVC storage tank and connection to toilets.
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.:- 15 mm dia nominal bore from PVC storage tank to toilets.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank(500 Ltr.).
P/f of float valve 25mm dia brass in side of RWH tank.
P/f of tolu pump etc. complete.
Septic Tank:-Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
Providing and laying in position cement concrete of specified grade excluding the cost of centering andshuttering - All work up to plinth level.:1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size)
Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand):-With modular bricks.
15 mm cement plaster on the rough side of single or half brick wall of mix::-n cement Mortar 1:6.
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate
Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and acess platform.
Edges of slab, under 20 cm wide.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and superstructure. Mild steel and medium tensile steel bars.
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size).
Water supply and Sanitary installation:- Providing and fixing to wall ceiling and floor polytene aluminium composite pressure pipe of 15 mm dia of kitec confirming to ISI 15450-2004 including making good the wall, ceilling and flooras per the direction of Engineer-in-Charge including carriage of materials with in all leads lifts and other incidentals.
Providing and fixing white vitreous china pedestal type water closed (European type WC pan) with seat and lid, 10 litre low level white PVC flushing cistern, including flush pipe, with maunally controlled device (handle lever), conforming to IS 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors whereever required WC pan with ISI marked white solid plastic seat and lid.
Providing and fixing PVC low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, 10 litre capacity-white
Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings flat back wash basin of size 6.30x450 mm
Providing and fixing white vitreous china pedestral for wash basin completely recessed at the back for the reception of pipes and fittings.
Providing and fixing GI Union in GI pipe including cutting and threading the pipe and making long screws etc complete (New work) 32 mm nominal bore
Providing and fixing water closet squatting pan (indian superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete
Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
Providing and fixing brass bib cock of approved quality 20 mm nominal bore
Providing and fixing PTMT pillar cock of approved quality and colour 15 mm nominal bore 107 mm long weighing not less than 110 gms
Providing and fixing PTMT pillar cock of approved quality and colour 20 mm nominal bore 89 mm long weighing not less than 88 gms
Providing and fixing 8 mm dia CP/SS Jet with flexible tube upto 1 metre long with SS triangular plate to Eureopean type WC of quality and make as approved by Engineer-in-Charge
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing balcony, railing, staircase railing and similar works, including applying priming coat of approved steel primer GI pipes
Providing and fixing 110 mm dia PVC P or S trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete as per the direction of Engineer-In-Charge including carriage of materials with in all leads, lifts and other incidentials
Providing and fixing stainless steel kitchen sink of size of size 610x460x200 No. 1022 of Paryag Polymers mm of approved standard (SI make with drain board and CP waste with CI or MS Brackets painted white including cutting holes and making good the same (but excluding fitting) of Parryware/Hindware/Jaguar as per the direction of Engineer-In-Charge including carriage of materials with in all leads, lifts and other incidentals.
Providing and fixing CP Brass Towel rail No. 1581 of Jaguar complete with CP Brass brackets fixed to wooden plugs with CP Brass screws 600mmx20mm (six hundred x twenty milimetre) as per the direction of Engineer -In-Charge including carriage of materials with in all leads, lifts and other incidentals.
Providing and fixing liquid soap container with CP Brass lid and brackets fixed to wooden plugs with CP Brass screws as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.
Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive cost of cutting and making good the wall and floors etc. complete 110*90 mm (one hundred ten*ninty millimetre) as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals
Providing and fixing high pressure uPVC spigot and socket waste and ventilating pipes confirming to ISI-15328 SNB of Supreme/Fenolex/Kitech marked including fixing with approved adhesive etc. complete as per the direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. 110 mm dia (one hundred ten) dia
150 mm dia (one hundred ten) dia
Providing and fixing 110 mm (one hundred ten millimetre) dia PVC Collar ISI marked including fixing with approved adhesive etc. complete as per the direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals
Providing and fixing 110 mm (one hundred ten millimetre) dia PVC plain bends ISI marked including fixing with approved adhesive etc. complete as per the direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incident
Construction chamber 300 mm x 300 mm x 500 mm (three hundredxthree hundred x five hundred millimetre) inside size for stock cock with CI surface box 100mmx100mmx75mm (one hundredx one hundred x 75 millimetre) (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (one cement: two sand: four graded stone aggregate 20mm 1:5:10 (one Cement: 5 sand: ten graded stone aggregate 40mm (forty millimetre) nominal size) and inside plastering with cement mortar 1:3 (one cement three sand) finished with a floating coat of neat cement including curing complete with 100 mm (hundred millimetre) thick walls of brick masonry in cement mortar 1:5 (one cement: five sand) as per the direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals.
Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters including fixing with necessary screws etc. complete triple strip vertical type
SANTOSH KUMAR
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .