MPLADS

Brick Masonry in superstructure with CM (1:8) prop: using 2nd class traditional Bricks of size 23x11x7 cms having minimum crushing strength of 50 kg/cm2 including Cost and Conveyance of all materials, scaffolding charges, etc complete for finished item of work. (APSS No. 501 & 504). -For superstructure

Plastering with two coats 20mm thick base coat of CM (1:6) 16 mm thick and top coat of CM (1:4) 4mm thick including Cost and Conveyance of all materials and labour charges etc., complete

Dadooing to walls with coloured glazed tiles 1st. quality of any size of brand as approved by Engineer - in - charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, fine sand (screened), water, tiles, etc. to site, seigniorage charges, sales and other taxes on all materials, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work (APSS No.701 & 707)

Flooring with Vitrified tiles, 1st quality set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including etc., complete for finished item of work, but excluding the cost of conveyance of all materials.

Painting to walls with 2 coats of water proof cement paint of apporved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for internal walls

Supply and fixing of sal wood flush Door shutter of size 0.91 x 2.10 mt with frame made of well seasoned sal Wood scantlings of size 100 x 75mm and Flush door shutters, solid bond wood block board type with commercial ply on both faces.: 30 mmthick including fixers of 6 nos of 9" 200 mm long Aluminum aldrop-1 no, 250mm Aluminumtower bolt - 1No, 150mm Aluminum tower bolt - 1no, 125 long Aluminium butt hinges 3 No's, Aluminum fancy handles 150 mm -1nos with necessary screws complete. for frame only

Painting to MS Iron Gate and Doors using with synthatic Enamil paint two coats over primer coat of red oxid including Cost and Conveyance of all other materilas labour Charges etc.,complete.

Supply, Fixing and Transportation of 18W/20W, 1100mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete. with Fixing of 18W/20W LED luminaire on wall / Ceiling with / TW round blocks with all accessories including giving connections and all labour charges etc., complete. Makes: a) LUMINAIRE : Phillips / GE-Venture / Crompton / Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites / Gold Medal/Eveready / Surya /C&S/ Fortune Art / Syska / Enrich / Stanjo / Polycab/ Ib LED/ Opple/R LED/Luker/ Orbit/Panasonic /Trinic /Lumens b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / EVERLIGHT.

Supply and fixing of 1200mm (48") sweep 230V, A.C. 50Hz. Ceiling fan controlled by one switch & electronic regulator of 300 Watts step type and concealed PVC fan hook box etc complete as required.

Supply of Step type Electronic Regulator, Socket size of wattage 100/120W ISI marked. Makes: As per list of recommended brands.

Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.

Supply & Run of 1 of 14/0.3mm (1.0sq.mm) fire retardant(FR) P.V.C. insulated flexible copper cable in existing pipe for earth continuty including all labour charges etc., complete

Supply & Run of 1 of 20/0.3mm (1.0sq.mm) fire retardant(FR) P.V.C. insulated flexible copper cable in existing pipe for earth continuty including all labour charges etc., complete

Supply and run of 2 of 2.5 sqmm wpsc aluminium cable along with no 10 SWG GI bearer wire through pvc cleats including all accessaries and labour charges - 100 mt

Supply and 2 runs of 56/0.3 (4.0 sq mm) (phase neutral and earth) FRLS / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing conduit pipe for run of mains including labour charges etc., complete as required including labour charges for 16A sockets. Makes of wires:- Finolex / RR kabel / Havells /KEI/Polycab/Gloster / V-Guard/Bonton /Finecab/ HPL / GM / Million / Goldmedal /Fortune Art / Sudhakar/Orbit/ Tamra/ Anchor/Plaza/Vihan/Ollvin

SPN 12 way Distibution board with IP-43, 40A DP Isolator - 1 No for incomer, 10kA-6-32A SP MCBs - 6 Nos for outgoing.

Supply and fixing of 16A 3 pin /6A 3 pin plug socket with indicator lamp and 16A fuse unit and 16A switch control(5 in one) on decolam sheet covered board including earth conection and all labour charges etc.,complete on wall

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., comp

Drilling of Bore well with Hand Bore set to a finished dia of 165 mm justify both sides in all kinds of formations suitable for hand bore set drilling such as black cotton soils, sandy and alluvial soils and insertion of PVC/PVC blue casing pipe with couplings including slotting of pipe where ever required and fixing of bore well with cap and bail plug as per directions of the department for a finished item of work including conducting yield test, crew charges, cost of consumables, transportation charges and bore development charges and all other charges required in fixation of pipe assembly, Flushing of bore with required pressure excluding cost of all required materials such as cap, bail plug, clamp sets, bolts and nuts etc., excluding all taxes , cost of PVC casing pipe, slotting charges including contractor profit and over heads excluding GST

Cost, Supply and fixing of 180 mm 6/kg cm2 PVC casing pipe including all labour Charges etc Complete

Supply and Transportation of 1.0 HP, 10 Stage 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, pump shall be suitable for various delivery head and discharge with stainless steel shaft motor suitable for working on 240V ± 10%, single phase 50 Hz AC supply, etc complete for 4" Bore well. Makes: As per list of recommended brands as category

Supply and delevery of 32 mm dia HDPE pipes 10Kg/Sq.cm. and including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work but excluding GST.

Supplying and run of 2 of 2.5 Sqmm 36/0.3mmFR PVC insulated flexible copper cable in Existing pipe for mains inlcuding all labour charges

Cost, Supply and fixing of 25mm Steel Nippols including all labour Charges etc Complete

Cost, Supply and fixing of 32 mm MS clamp sets including all labour Charges etc Complete

Cost, Supply and fixing of 180 mm PVC bore Cover including all labour Charges etc Complete

Cost, Supply and fixing of Electrial Panal Box including all labour Charges etc Complete

Providing & fixing PVC/ SWR pipes TYPE-B conforming to IS 13592:1992 including necessary specials,jointing with adhesives ,fixing vertical pipes over wooden battens including cost and conveyance of all materials at site complete for finished item of work.

Providing and placing on terrace (at all floor levels)polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges , complete for finished item of work.