Construction of School of Computer Science and Engineering in Govt. College Dharamshala, Distt. Kangra H.P. (Deposit work)

Amount

Excavation in foundation, trenches etcetera in earth work by mechnical means (hydraulic excavator/ manual mean in all classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, including shoring, shuttering and pumping out water upto any depth and any quontam of water including slush which may be arise during de-watering removal of slush and stacking the serviceable and un-serviceable material clear from the edge of excavation as direction of Engineer-In-Charge and retuning the stacked soil in 15cm (Fifteen centimeter) layers, when required into plinths, sides of foundation etcetera consolidating each deposited layer by ramming, watering and then disposing of all excavated earth as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Excavation in drains and channels etcetera in earth work in all kind of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting, saturated soil including chiseling and any other mixed variety of soil, including shoring, shuttering, de-watering and pumping out water upto any depth and any quontam of water including slush which may be arise during the de-watering removal of slush and stacking the serviceable and un-serviceable material clear from edge of excavation as per direction of Engineer-In-Charge and then returning the stacked soil in 15cm (fifteen centimeter) layer when required into plinths sides of foundations etcetera consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads , lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Supplying and filling in plinth with sand under floor including watering, ramming, consolidating and dressing complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etccetra, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings as per approved drawing, design and specifications, as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers girders and lintels sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depths as per approved drawing, design and specifications, as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns pillar posts and struts Square, rectangular or polygonal in plan as per approved drawing, design, specifications, as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres),so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing and (except spiral stair cases) as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls under any thickness as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in Weather shade, Chajjas, corbels etcetera. including edges as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in Small lintels not exceeding 1.5 m ( one decimal five metre) clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying in position cement concrete 1:3:6 ( one cement isto three coarse sand isto six graded stone aggregate 20mm ( twenty millimetre nominal size) of specified grade excluding the cost of centering and shuttering - All work up to plinth level mechnically mixed and curing complete including carriage of material, within all leads, lifts and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (One cement isto Four sand isto Eight graded broken/crushed stone aggregate 40mm (Forty milimetres ) nominal size ) mechanically mixed and curing complete excluding cost of forms work in foundation and plinth as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Filling in plinth with stone under floor including watering, ramming, consolidating and dressing complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Coursed rubble masonry ( first sort) with hard stones of approved quality in foundation and plinth in Cement Mortar 1:6 (one cement isto six sand) including raking out joints and curing complete, as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-20 ( M- twenty) design mix to obtain the compressive strength of 20N/mm 2 (twenty newton per Square milimetre) for reinforced cement concrete work, using cement with cement content not less than @ 330 kg/cum. ( three hundred thirty kilogram per cubic metre) or as per approved design mix for all work upto plinth level to give a smooth surfaces mechnically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 ( M- twenty five ) design mix to obtain the compressive strength of 25N/mm 2 (twenty five newton per Square milimetre ) for reinforced cement concrete work, using cement contents not less than @ 360 kg/cum. ( three hundred sixty kilogram per cubic metre) and as per approved design mix for all work above plinth level to give a smooth surfaces mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-20 ( M- twenty) design mix to obtain the compressive strength of 20N/mm 2 (twenty newton per Square milimetre) for reinforced cement concrete work, using cement contents not less than @ 330 kg/cum. ( three hundred thirty kilogram per cubic metre or as per approved design mix for work above plinth level to any height to give a smooth surfaces mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Steel reinforcement Thermo-Mechanically Treated bars of grade Fe-500D (Fe- five hundred) or more of Tata Tiscon / Sail approved by the HP PWD for reinforced cement concrete work including straightening, cutting, bending, binding placing in position all complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Damp Proof Course 100mm (One Hundred milimetres) thick with cement concrete 1:2:4 (one cement: two sand: four graded crushed stone aggregate 20mm (Twenty milimetres nominal size) and curing complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing & applying a coat of residual petroleum bitumen of grade VG-10 (viscosity grade - ten) of approved quality using 1.7kg (one decimal seven kilogram ) per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven decimal five) in super structure : cement mortar 1:4 (one cement isto four coarse sand) including curing complete , as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Brick work using Second Class common burnt clay building bricks in super-structure upto all floor level in cement mortar 1:6 (One cement isto Six sand) and curing complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

40mm (forty milimetre) thick Cavity wall second class common burnt clay building bricks in wall 40 cm ( forty centimetre) thick with 5.5 cm (five decimal five centimetre) in wide cavity and consisting 23 cm ( twenty three centimetre) thick inner and outer wall 11.5 cm ( eleven decimal five centimetre) laid in cemnet mortar 1:3 ( one sand isto three sand) and strength with hoop iron and bituminious coated cross ties including making weep hole and vent pipe complete 2 Nos. (two numbers ) 6/8 mm ( six / eight milimetre ) diametre brass in Z- shape crossing each other shall be provided at the interval 90-100 cm ( ninety - hundred centimetre) length horizontal and vertical in cavity wall and curing complete ) . The measurement of wall faces only one side will be considered for payment) , as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S. channels Frames 75 X 40 X 4 mm ( seventy five into forty into four milimetre) M.S. angle iron 25 X 20 X 3 mm ( twenty five into twenty into three milimetre) M.S. T - section 25 mmx 25 mmx 3 mm ( twenty five milimetre into twenty five milimetre into three milimetre) for doors, windows, frames manufactured from ISMC 75mmx40mm ( seventy five milimetre into forty milimetre ) and Z- Sections as per detail with M.S Flat 75mmx4mm ( seventy five milimetre into four milimetre ) in combination as per drawing and design including hinges, jamb, lock jamb beed and if required thrashold of M.S. angles means lugs, with split end tails to each jamb including iron butt hinges 2.5mm ( two decimal five milimetre) thick with a provision of locking arrangement and shock observers as specified and applying a coat of approved steel primer after pre-treatment of the surface as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing factory made ISI marked steel Z Section glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etcetera complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, fixing with 15x3 mm ( fifteen into three milimetre) lugs 10 cm ( ten centimetre) long embedded in cement concrete block 15x10x10 cm ( fifteen into ten into ten centimetre) of C.C. 1:3:6 (one Cement isto three coarse sand isto six graded stone aggregate 20 mm ( twenty milimetre) nominal size) as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Single / double rebate angle iron door, window, clerestory window frame manufactured from structural steel iron section of 35x35x5mm/40x40x5mm ( thirty five into thirty five into five milimetre / forty into forty into five milimetre) including hinges, jambs, lock jambs beads and if required angle thrashold of MS Flat 50x4mm mm ( fifty into four milimetre) welded or rigidly fixed by mechanical means lugs with split end tails to each jambs including steel butt hinges 2.50mm (two decimal five zero milimetre) thick with provision with locking arrangeemnt and shock observer as specified and applying a coat of approved steel priming after pretreatment of the surface, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing door frames, 30mm (Thirty millimetres) thick factory made PVC panelled door shutter of Rajshri ( code No. 9.120) consisting of frame made out of M.S. tubes of 19 (Nineteen) gauge thickness and size of 19mm x19mm (Nineteen into nineteen millimetre) for styles and 15mmx15mm (Fifteen into fifteen millimetre) for top & bottom rails, M.S. frame shall have a coat of steel primer of approved make and manufacture M.S. frame covered with 5mm (Five millimetre) thick heat moulded PVC "C" channel of size 30mm (Thirty millimetre) thickness, 70mm (Seventy millimetre) width out of which 50mm (Fifty millimetre) shall be flat and 20mm (Twenty millimetre) shall be tappred in 45 (Forty five ) degree angle on either side forming style and 5mm (Five millimetre) thick, 95mm (Ninety five millimetre) wide, PVC sheet out of which 75mm (Seventy five millimetre) shall be flat and 20mm (Twenty millimetre) shall be tapered in 45 (Forty five) degree on the inner side to form top and bottom rail and 115mm (One hundred fifteen) wide PVC sheet out of which 75mm (Seventy five millimetre) shall be flat and 20mm (Twenty millimetre) shall be tapered on both side to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm (Ten millimetre) thick, 20mm (Twenty millimetre) wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm ( five millimetre) thick both side PVC Sheet to be fitted in the M.S. frame welded/sealed to the style & rails with 7mm (Seven millimetre) (5mm+2mm) ( five millimetre +two millimetre) thick x15mm (into fifteen millimetre) ) wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An addtional 5mm ( five millimetre) thick PVC strip of 20mm ( twenty millimetre) wide is to be stuck on the interior side of the 'c' Channel using Solvent adhesive etcetera complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S. grills 10x10mm ( ten into ten milimetre) square bars in combination of 20x4 mm ( twenty into four milimetre) M.S flat as per design of required pattern in frames of windows etcetera with M.S. flats, square and round bars etcetera, including priming coat with approved steel primer all complete Fixed to steel windows by welding , as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 40mm ( forty milimetre) thick first class deodar wooden glazed and panelled shutter having infill panels of 12 mm ( twelve milimetre) thick Phenol Bonded (Both Sides) Prelaminated BWP Grade partical Board in matt Finish ISI marked IS No. 12823 of action Tesa/ Greenlam/ Merinolam/ Kitlam/ vista in below lock rail and above lock rail infill panels of 6mm ( six milimetre) thick glass panes of Modi Guard / saint Gobin , as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 35 mm ( thirty five milimetre) thick ISI marked flush door shutters both side commerical phenol bonded flush door shutter of CENTURY / ALPRO / DURO PLY / GREEN PLY No. IS : 2022 to be finihsed with mica lamination of approved shade conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of first class hard wood and well matched commercial 3 (three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing glazing in door, window, ventilator shutters and partitions etcetera with EPDM rubber / neoprene gasket etcetera complete, with float glass panes of 5 mm ( Five milimetre) thickness (weight not less than 12.50 kg/sqm ( twelve decimal five zero kilogram per square metre) of modi guard / saint gobain as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing glazing in door, window, ventilator shutters and partitions etcetera with EPDM rubber / neoprene gasket complete, with Frosted Glass 4mm ( four milimetre) thickness (weight not less than 10.00 kg/sqm ( ten kilogram per square metre) of Modi guard / sanit gobain as per the architectural drawings, design, specification and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing the complete box of cup board shall be made of 25mm (Twenty Five millimetre) thick water proof termite resistant ply board of Uniply / Green ply/ Century ply / Kitply / Dura ply / Marino ISI marked including shelves. Back side of cup board shall have 6 / 8 mm (Six / eight millimetre) thick water proof ply. All the cut portion of board shall have 6 mm (Six millimetre) thick hard wood edging. The shutter from all side shall be finished with 1mm ( one millimetre) thick lamination ISI Marked of approved shade of Century / Greenlam /Action Tesa and 19 mm (Nineteen millimetre) thick water proof Ply board of Uniply / Green ply/ Century ply / Kitply / Dura ply / Marino including hinges, PTMT handle in wood colour of Prayag Polymers, knob megnatic catcher complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 65x35mm ( sixty five into thirty five milimetre) special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etcetera ( Indian make of approved quality) complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 25 mm ( twenty five milimetre) diametre stainless steel curtain rod having wall thickness of 1.25mm (one decimal twenty five milimetre) with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etcetera wherever necessary complete , as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 300x16 mm ( three hundred into sixteen milimetres) aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetera complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 200x10mm ( two hundred into ten milimetres) size aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetera complete , as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material, within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 150x10mm (one hundred fifty into ten milimetre) size oxidised M.S. tower bolt black finish (Barrel type), ISI marked, with necessary screws etcetera complete , as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material, within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 125mm (One hundred twenty five milimetre) size aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetera complete , as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 250mm ( Two hundred fifty millimetre) M.S. hooks and eyes complete including carriage of material within all leads, lifts and other incidentials , as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS No. 3564, embossed on the body with necessary accessories and screws etcetera complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing aluminium hanging twin rubber floor door stopper ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetera complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying mirror polished 25mm ( twenty five milimetre) thick kota stone minimum size 55x55 cm ( fifty five into fifty five centimetre) of uniform colour with 7.5mm ( seven decimal five milimetre) wide Jaislmer Yellow marble band in flooring as per detail approved shade and design over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the Kota stone including curing, rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) , as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providng and laying 600x600mm ( six hundred into six hundred milimetre) Full Matt finished vetrified tiles of Restile/ Nitco/ Rak / Kajaria / Orient / Bell / AGL/ Simpolo / Johnson / Somany of approved Shade and design in flooring ( thickness to be specified by the manufacturer ) with water absorption less than 0.08 % (zero decimal zero eight percentage) and conforming to IS : 15622, of approved make and shades, laid on 20mm ( twenty milimetre) thick cement mortar 1 : 4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/ sqm ( three decimal three kilogram per squre metre) including curing , grouting the joints with white cement and matching pigments etcetera complete , as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providng and laying Full Matt finished vetrified tiles of Restile/ Nitco/ Rak / Kajaria / Orient & Bell / AGL / Simpolo / Johnson / Somany of approved Shade and design in Dado / skirting ( thickness to be specified by the manufacturer ) with water absorption less than 0.08 % (zero decimal zero eight percentage) and conforming to IS : 15622, of approved make and shades, laid on 20mm ( twenty milimetre) thick cement mortar 1 : 4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/ sqm ( three decimal three kilogram per squre metre) including curing , grouting the joints with white cement and matching pigments etcetera complete , as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providng and laying 600x600mm ( six hundred into six hundred milimetre) Double charge / Ultra Charge vetrified tiles in flooring / skirting where as per required of Restile/ Nitco/ Kajaria / Rak / AGL / Orient / Bell / Simpolo / somany /Johnson / Agl as per approved Shade and design of the office ( thickness to be specified by the manufacturer ) with water absorption less than 0.08 % (zero decimal zero eight percentage) and conforming to IS : 15622, of approved makes and shades, laid on 20mm ( twenty milimetre) thick cement mortar 1 : 4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/ sqm ( three decimal three kilogram per squre metre) including curing , grouting the joints with white cement and matching pigments etcetera complete , as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 30cm x 30Cm x 2.5cm ( thirty centimetre into thirty centimetre into two decimal five centimetre) thck automatic Hydraulic compressed and polished Precast terrazzo tiles of NTC in Flooring / skirting where as required of ISI marked No IS: 1237 top layer in (50%) (Fifty Percent) white and 50% (Fifty percent) Grey cement having 55 % ( fifty five percent) in white chip and 15 % ( fifteen percent) each dark green, Yellow and maroon chips . The size of chips shall be 0,B and 2B of NTC/ Unistone/ Atlantic with marble chips of specified sizes laid in floors, treads of steps, ramp , landing and skirting on a bed of 25mm (Twenty five milimetre) thickness of cement mortar 1:6 (one cement isto six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) including curing, rubbing and polishing complete , as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 300x300 mm (three hundred into three hundred millimetre) Antiskid Ceramic tiles of Premium quality of Nitco / Rak / Kajaria / Johnson / AGL / Somany / Orient Bell in flooring laid over 12mm (Twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto floor level in all heights , as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Ceramic Glazed tiles of Kajaria / Johnson / Nitco / Orient / Bell / Somany / AGL with one border matching contrast at top size 300x450 mm ( three hundred into four hundred ffity milimetre) (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make and shade, laid on 20 mm ( twenty millimetre) thick cement mortar 1:4 (one Cement isto four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three decimal three kilogram per square metres) including curing , grouting the joints with white cement and matching pigments etcetera complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Ceramic tiles of Kajaria /Johnson / Nitco / Orient / Bell / Somany / AGL in Dado & Skirting with one border matching contrast at top size 300x450 mm ( three hundred into four hundred ffity milimetres) (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make and shade laid on 20 mm (twenty millimetre) thick cement mortar 1:4 (one Cement isto four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three decimal three kilogram per square metres) including curing, grouting the joints with white cement and matching pigments etcetera complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Kota stone slabs 25 mm ( twenty five milimetre) thick in single slab with uniform noising / edging for treads and single piece ( mirror polished) risers of stairs approved shade 20 mm ( twenty milimetre) average thick base of cement mortar 1:4(one cement isot four coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including curing, rubbing and polishing complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 19 mm ( Nineteen milimetre) thick polished Grey / Cheema Pink Granite having semi round nosing gang saw cut, mirror polished, premoulded and prepolished, machine cut for work top of Toilet shelves, water trough and Kitchen works top over 20 mm ( twenty milimetre) thick base of cement mortar 1:4 (one cement isto four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetera complete , as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 300x300x25mm (Three hundred into three hundred into twenty five millimetre) labrador design (Rainbow series ) Tiles of NTC / Unistone / Atlantic in slab flooring on 20mm (twenty millimetre) average thick fixed on floor , Ramp with cement Mortar 1:3 (One cement isto three sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles including curing , rubbing, polishing, cutting and moulding complete, including carriage of materials within all leads, lifts and incidentials as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing hand rail 50mm diametre SST stainless steel pipe handrail fixed with 35mm ( thirty five milimetre) diametre SSt pipe baluster asper detail in combination of 35mm diametre and 15 / 20 mm ( fifteen / twenty milimetre) SSt baluster complete in all respect , as per approved drawing, design and specification including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate is including Royality, Malkana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.

Providing and fixing 50 mm (fifty milimetre) diametre stainless steel ( SST ) hollow pipe handrail slip resistant in ramp with round ends 75cm ( seventy five centimetre) and 90 cm ( ninety centimetre) height. It should extend 30 cm ( thirty centimetre) beyond top and bottom of the ramp welded with 25mm ( twenty five milimetre) diametre SSt hollow pipe balusters welded to 50mm( milimetre) diametre SSt pipe embedded in cement concrete 60 cm ( sixty centimetre) C/C and jointing with electrical gas welding at top alongwith hand rail of hollow SSt pipe of 50mm diametre, as per approved drawing, design and specification including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.

Providing and fixing pre-painted steel sheet (ISI marked -Z120) factory made ridges having proper Gola shape and hips of TATA Durashine/ Sail/ Reliance/ Jindal 60cm (sixty centimetre) over all with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (Five) microns primer coating + back coating of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia prepainted bitumen washers complete in all respect , as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing pre-painted sheet valleys 90cm (Ninety centimetre) over all with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet of TATA Durashine/ Sail / Reliance/ Jindal in roofing with hot dipped metalic zinc coated sheet with top coat of regulatr modified polyster organic coating of 20 (twenty) mocrons over 5 (Five) microns coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with J or L hooks, bolts and nuts 6mm (Six millimetre) dia with prepainted limpet and bitumen washers complete in all respect , as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 0.60mm (sixty millimetre) thick prepainted steel sheet (IS marked Z-120) of TATA Durashine/ sail / Reliance / Jindal over steel trussed in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating of back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (six millimetre) diametres with prepainted limpet, rubber washers complete with all accessories as required , as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 30cm (Thirty centimetre) wide 25cm (Twenty five centimetre) deep plain G.I. sheet gutter of 0.60mm (zero decimal six zero millimetre) thick sheet fixed with bolts, nuts and washers etcetera having dome shape gratting as per specification including making necessary connections with rain water pipe complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S. B.P. sheet 2 mm (two millimetre) thick of TATA/SAIL shall have 19x19mm ( nineteen into nineteen milimetre ) hollow square bar leading it at suitable intervals in eaves board / Facia / Soffit / Ceiling including cutting, fixing and jointing with gass/electric welding with steel roof member and applying a coat of red lead primer complete as per PWD specification, approved drawing and design (frame work is to be measured and paid for separately) including cost and carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing flashing 38cm (Thirty eight centimetre) overall with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet of Tata / sail / Reliance / Jindal with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia meter & prepainted G.I. limpet & bitumen washers complete. as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 150 mm (One hundred fifty millimetre) diametre high pressure P.V.C spigot and socket Rain water pipe of Supreme / Finolex / Vectus / Relpipe (reliance) working pressure not less than 6 kg/cm2 ( Six kilogram per square centimetre) I.S.I Marked including fixing with approved adhesive etcetra complete including carriage of material within all leads, lifts and other incidentals , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing on wall face PVC (D-plast) accessories for rain water pipes of Supreme / Finolex / Vectus / Relpipe (reliance) including filling the joints with approved adhesive complete , as per PWD specification, approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- in-Charge. The rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

150mm (one hundred fifty millimetre) dia PVC plain bend

150mm (one hundred fifty millimetre) dia PVC shoe

Providing and fixing unplasticised - PVC pipe clips / clamps of Supreme / Finolex / Vectus / Relpipe (reliance) of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm ( fifty into fifty into fifty millimetre) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement isto 4 coarse sand) and making good the wall etcetera complete , as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Structural steel work of Tata / Sail riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting Steel work with Deluxe Multi Surface Paint of Asian / Nerolac / Berger / Dulux to give an even shade. (Two or more coat) applied @ 0.90 ltr/ 10 sqm ( zero decimal nine zero litre per ten square metres) over an under coat of primer applied @ 0.80 ltr/ 10 sqm ( zero decimal eight zero litre per ten square metres) of approved brand and manufacture as per approved drawing, design and specification including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate is including Royality, Malkana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.

Applying priming coat With ready mixed pink or Grey primer of Asian / Nerolac / Berger / Dulux approved brand and manufacture on wood work (hard and soft wood) as per approved drawing, design and specification including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate is including Royality, Malkana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.

Painting wood work with Deluxe Multi Surface Paint of Asian / Nerolac / Berger / Dulux required shade (Two or more coat ) applied @ 0.90 ltr/10 sqm ( zero decimal nine zero litres per ten square metres) over an under coat of primer applied @0.75 ltr/10 sqm ( zero decimal seven five litres per ten square metres ) as per approved drawing, design and specification including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate is including Royality, Malkana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.

Providing and applying 6 mm ( six milimetre) thick cement plaster in ceiling with cement mortar 1 : 3 (1 cement isto 3 fine sand ) curing complete, as per approved drawing, design and specification including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate is including Royality, Malkana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:4 (one cement isto four sand) in single coat on fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth and curing complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on rough side of brick / concrete / stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even , smooth and curing complete, as per PWD specification,approved drawing, design including carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including of Octroi, Royality, Malkana, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on fair side of brick / concrete / stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even , smooth and curing complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

20 mm (Twenty milimetres) thick cement Pattern in plaster with cement Mortar 1:4 (one cement isto four sand) complete , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 1200 x 2400mm ( Twelve hundred into two thousand four hundred milimetre) Green Chalk board / Black board of Landmark / Promark shall be made of steel of thickness 0.3 to 0.4 mm ( zero decimal three to zero decimal four milimetre) . It shall have vitreous Enmal coating of 0.095 mm ( zero decimal zero nine five milimetre) minimum thickness on top and 0.3 mm ( zero decimal three milimetre) on the back top shall be free from waviness and shall show excellent ability. The core material shall be 9 mm ( nine milimetre ) thick MDF board having bluk density of 750 kg/ cum ( seven hundred fifty kilogram per cubic metre ) and grade - 1 as peer IS : 212406-203 edition 2.2 the backing material sheet shall be min. 0.25 mm ( zero decimal two five milimetre) thick electro galvanised steel sheet conforming to IS : 277-2003. The board shall be fixed on the wall specially designed J clamps and square clamps with help of Nylon sleves and screws as per site requirement , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and applying white cement based putty of Birla / JK average thickness 1 mm ( one milimetre) over the plastered wall surface to prepare the surface even and smooth complete, as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing water proofing treatment shall be done in two coats apply First coat of Dr. Fixit Torch SHIELD ( P - 3160- 3mm ( P- three one six zero - three milimetres ) to the clean and saturated surface maintaining a coverage 0.60 sqm (Zero point six zero squate meter) per kilogram to achieve 1mm (one millimeter) thickness this coating shall also be executed up to 300mm ( three hundred milimetres) vertically. The 2nd (second ) coat shall be applied in opposite direction after 4 to 6 (Four to six) hours of application of 1st (first ) coat then sprinkle sand on top surface of applied Dr. Fixit Fast flex white still tacky and the second coat. Then apply cement mortar 1:4 (one cement ist four sand) and mixed with Pidiproof LW at the rate 200ml (two hundred millimetre) per 50 (Fifty kilogram) of cement over the floor with suitable gradient towords drain water pipe while the second coat of Dr. Fixit is still tacky complete, as per approved drawing, design including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate is including Royality, Malkana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.

Finishing walls with weather proof exterior emulsion paint of Asian / Dulux / Berger / Nerolac Suraksha paints of approved shade having VOC less than 50 gm/litre ( Fifty gram per litre) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm ( one decimal four three litre per ten square metre) Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm ( zero decimal nine zero litre per ten square metre) , as per approved drawing, design and specification including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate is including Royality, Malkana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.

Painting two or more coats with Premium Enamel paint of Asian / Dulux / Berger / Nerolac Suraksha paints of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of a required for metling the surface , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting two or more coats with acrylic washable Distemper of Asian / Dulux / Berger / Nerolac Suraksha paints of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of a required for metling the surface , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying two or more coats of Premium Enamel of Asian / Dulux / Berger / Nerolac Suraksha paints ( above Dado / Skirting ) of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of a required for metling the surface , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting two or more coats with Premium emulsion of Asian / Dulux / Berger / Nerolac Suraksha paints of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of a required for metling the surface , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm wide ( fifteen milimetre) and 15mm ( fifteen milimetre) deep groove in the top layer of Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including curing , removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600 x 600 x 6mm ( six hundred into six hundred into six milimetre) ACP Panel ceiling in toilet with prepainted G.I. channel framing @ 600mm ( six milimetre) centre to centre as per detail , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing acoustical panels of 600x600x16 mm ( six hundred into six hundred into sixteen milimetre) dune RH99 tiles of Armstrong fix with powder coated G.I. frame work @ 600mm ( six hundred milimetre) centre to centre in combination with 150x12 mm ( one hundred fifty into twelve milimetre) thick Rai wood border as per pattern and detail , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing plinth protection with 40 mm ( Forty millimetre) thick interlocking tiles/ cement concrete paver block with 23 cm ( twenty three centimetre) dia half round RCC pipe for drainage purpose laid over 10cm (ten centimetre) concrete 1:4:8 ( one cement isto four sand isto eight graded stone aggregate ) 40 mm (forty milimetre) nominal size in bedding / haunching complete , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 12mm (twelve millimetre) thick Unistone / NTC / Atlantic tile cladding on wall surface with 12mm ( twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) and jointed with cement slurry to match the stone including, curing , scaffolding and cost and carriage of material , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying 60mm ( sixty milimetre) thick factory made cement concrete interlocking paver block of NTC of M -30 (thirty) grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm ( fifty milimetre) thick compacted bed of coarse sand, filling the joints with line sand etcetera all complete , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 455x610mm (four hundred fifty five into six hundred ten milimetre) light duty rectangular manhole with frame cover weight 38 kg (thirty eight kilogramm ) single seat including entire carriage of material within all leads, lifts and other other incidentals , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C ( eighty degree celsius), including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 (one ) metre spacing including concealed work, cutting chaseal and making good the wall etcetera. This includes testing of joints complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

1620 (20mm) twenty millimetre diametre O.D. pipe

2025 (25mm) twenty five millimetre diametre O.D. pipe

Making connection 25 to 40 mm ( twenty five to forty milimetre) nominal bore of G.I. distribution branch with G.I. main by providing and fixing tee, including cutting and threading the pipe etcetera complete ; as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked of Finolex , Relpipe (Reliance ), Vectus including fixing with approved adhesive etcetera Complete , as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm ( one hundred ten milimetre) diametres

75mm ( Seventy five milimetre) diametres

Providing and fixing PVC. holder bat clamps of ISI marked of Finolex , Relpipe (Reliance ) , Vectus approved design to P.V.C. rain water pipes embedded in cement concrete blocks 10x10x10 cm ( ten into ten into ten centimetres) of cement concrete 1:2:4 mix (one cement isto two coarse sand isto four graded stone aggregate 20 mm ( twenty milimetres) nominal size) and cost of cutting holes and making good the walls etcetera , as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm ( one hundred ten milimetre) diametres

75mm ( Seventy five milimetre) diametres

Providing and fixing P.V.C. heal rest ISI marked of Finolex , Relpipe (Reliance ) , Vectus Confirming to IS no-14735-99 including filling the joints with approved adhesive, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm ( one hundred ten milimetre) diametres

75mm ( Seventy five milimetre) diametres

Providing and fixing ISI marked P.V.C. Plain bend of Finolex , Relpipe (Reliance ) , Vectus Confirming to IS no-14735-99 including filling the joints with approved adhesive, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm ( one hundred ten milimetre) diametres

75mm ( Seventy five milimetre) diametres

Providing and fixing ISI marked P.V.C. Vectus Collar of Finolex , Relpipe (Reliance ) , ISI marked confirming to IS No-14735-99 including fixing with approved adhesive complete, as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm ( one hundred ten milimetre) diametres

75mm ( Seventy five milimetre) diametres

Providing and fixing 75mm (seventy five millimetre ) diametre P.V.C. cowl ISI marked of Finolex , Relpipe (Reliance ) , Vectus IS marked Confirming to IS No-14735-99 including fixing with approved adhesive complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material, within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing P.V.C. floor trap ISI marked of Finolex , Relpipe (Reliance ) , Vectus ISI marked Confirming to BIS-14735-99 of self cleaning design including fixing with approved adhesive , cost of cutting and making good the wall and floor etcetera complete, as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material, within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

110x90mm ( one hundred ten into ninety milimetre)

110x75mm ( one hundred ten into seventy five milimetre)

Providing and fixing water closet squatting pan (Indian type W.C. pan ) White Vitreous china Orissa pattern W.C. pan no 20090 of size 530x410 mm ( five hundred thirty into four hundred ten milimetre) with integral type foot rests with 100 mm ( one hundred milimetres) PVC P or S trap , 10 litre low level P.V.C. Dual flushing cistern of Hindware, Cera, Jaquar of star white / Snow white shade and as shown in the drawing / as per details including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type water closet (European type) No 20087 (S - 10 ) Size 57 X 35 X 39 cm ( fifty seven into thirty five into thirty nine centimetre) with ISI Marked white solid plastic seat and lid, 10 (ten) litre low level white PVC flushing cistern (sleek Plus) having dual flush system Hindware, Cera, Jaquar of star white / Snow white shade and as shown in the drawing / as per details & C.P. flush bend with fittings & C.I. brackets, 40 mm ( forty milimetres) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required, as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type Matrix water closet (European type) ISI marked white solid plastic with seat and lid, 10 (ten ) litre low level PVC flushing cistern having dual flush system of Hindware , Cera ,Jaquar of star white / Snow white shade and as shown in the drawing / as per details & C.P. flush bend with fittings & C.I. brackets, 40 mm ( forty milimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required, as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal of Hindware , Cera ,Jaquar of star white / Snow white shade and as shown in the drawing / as per details for wash basin completely recessed at the back for the reception of pipes and fittings as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Vitreous China Flat back wash basin Garnet no 10080 size 580x 430 mm ( five hundred eighty into four hundred thirty) milimetre ( Under counter Basin ) of Hindware , Cera , Jaquar of star white / Snow white shade and as shown in the drawing / as per details with single 15 mm ( Fifteen milimetre) C.P. brass pillar tap with C.I. brackets, 32 mm ( Thrity two milimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Vitreous China wash basin Flat back Matrix size 58x43 cm ( fifty eight into forty three centimetre ) of Cera / Hindware / Jaquar of star white/snow white shade as shown in drawing as per detail with single hole 15 mm (fifteen milimetre) C.P. Brass pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting complete , as per Architectural drawing, desing and specification and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing white vitreous china flat back half stall urinal no 60002 of size 39 x 37.5 x 59 cm ( thrity nine into thirty seven decimal five into fifty nine centimetre) with white PVC automatic flushing cistern of Hindware , Cera ,Jaquar of star white / Snow white shade and as shown in the drawing / as per details with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Range of Two half stall urinals with 5 ( five litre ) P.V.C. automatic flushing cistern

Range of three half stall urinals with 10 (ten litre ) P.V.C. automatic flushing cistern

Range of Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink of Diamond / Unik Kitchen sink with drain board 510x1040 mm ( five hundred ten into one thousand forty milimetre) bowl depth 250 mm ( two hundred ffity milimetre) with C.I. brackets and stainless steel plug 40 mm ( forty milimetre), including painting of fittings and brackets, cutting and making good the walls wherever required , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32 mm (thirty two milimetre) diametres C.P. brass chain and rubber plug complete for sink or wash basin ( heavy duty make) ISI marked is No. 8931 7893 , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm ( fifteen milimetre) nominal bore PVC connection pipe 45cm ( forty five centimetre) long of Finolex , Relpipe (Reliance ) & Vectus , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing C. P. Mixer for Kitchen sink with casted swinging spout at top of contiental series of Jaquar / Classik series of Hindware / Floral series of Cera / Vintage series of Kerovite / Hindon series of Jal , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32 mm (Thirty two millimetres) diametres C.P. Brass waste of Continental series of Jaquar / Classik series of Hindware / Floral series of Cera / Vintage series of Kerovite & Hindon series of Jal for wash basin and sink ( New work ) complete , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetre) diametres C.P. Grating of Continental series of Jaquar / Classik series of Hindware / floral series of Cera / Vintage series of Kerovite & Hindon series of Jal for gully floor and Nahni trap as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing, laying and jointing 150 mm ( one hundred fifty milimetre) diametres PVC pipes for sewer line of Supreme/ Finolex/ Vectus including testing of joints etcetera complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x450 mm ( six hundred into four hundred fifty milimetre) beveled edge mirror of Continental series of Jaquar / Classik series of Hindware / Floral series of Cera / Vintage series of Kerovite & Hindon series of Jal of superior glass (of approved quality) complete with 6 mm ( six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete, as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass towel rail 600X20 mm ( six hundred into twenty milimetre) of Continental series of Jaquar / Classik series of Hindware / Floral series of Cera / Vintage series of Kerovite & Hindon series of Jal complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour, as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing liquid soap container with C.P. Brass lid and brackets fixed to wooden plugs with C. P. Brass screws :- Plastic continer of Hindware/cera/ Jaquar, as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass each toilet paper holder of Continental series of Jaquar / Classik series of Hindware / Floral series of Cera / Vintage series of Kerovite & Hindon series of Jal , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 8 mm ( eight milimetre) diametre C.P. Jet of Continental series of Jaquar / Classik series of Hindware / Floral series of Cera / Vintage series of Kerovite & Hindon series of Jal with flexible tube upto 1.5 mtr. (one decimal five metre ) long complete , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15 mm ( fifteen milimetre) nominal bore C.P. brass bib cock tap of Continental series of Jaquar / Classik series of Hindware / floral series of Cera / Vintage series of Kerovite & Hindon series of Jal of approved quality conforming to IS : 8931 , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15 mm ( fifteen milimetre) nominal bore C.P. brass stop cock (concealed) Continental series of Jaquar / Classik series of Hindware / Floral series of Cera / Vintage series of Kerovite & Hindon series of Jal of standard design and of approved make conforming to IS : 8931 , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15 mm ( fifteen milimetre) nominal bore C.P. brass pillar tab cock (concealed) of Continental series of Jaquar / Classik series of Hindware / Floral series of Cera / Vintage series of Kerovite & Hindon series of Jal of standard design and of approved make conforming to IS : 8931 , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15 mm ( fifteen milimetre) nominal bore C.P. brass Pusk cock tap (concealed) of Continental series of Jaquar / Classik series of Hindware / Floral series of Cera / Vintage series of Kerovite & Hindon series of Jal of standard design and of approved make conforming to IS : 8931 , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15 mm ( fifteen milimetres) nominal bore C.P. brass angle valve of Continental series of Jaquar / Classik series of Hindware / Floral series of Cera / Vintage series of Kerovite & Hindon series of Jal for basin mixer and geyser points of approved quality conforming to IS:8931 as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 15 mm ( fifteen milimetre) nominal bore C.P. brass full way valve with wheel, of Continental series of Jaquar / Classik series of Hindware / Floral series of Cera / Vintage series of Kerovite & Hindon series of Jal , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm ( fifteen milimetre) nominal bore C.P. brass valve (Horizontal plunger) type High pressure with polythene plastic floats of Continental series of Jaquar / Classik series of Hindware / Floral series of Cera / Vintage series of Kerovite & Hindon series of Jal as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm ( fifteen milimetre) nominal bore PVC connection pipe with brass union 45cm ( forty five centimetre) long of supreme, Finolex , Relpipe (Reliance ) & Vectus , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32 mm ( thirty two milimetre) dia P.V.C. flexible waste pipe of supreme, Finolex , Relpipe (Reliance ) , Vectus for sink or wash basin including P.V.C. waste fittings complete , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing P.V.C single equal branch with oval access door of supreme/ Finolex / Vectus / Relpipe (Reliance ) insertion rubber washer 3mm (three milimetre) thick bolts and nuts ISI marked including finishing with approved adhesive complete , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred ten milimetre) diametres

75 mm (Seventy five milimetre) diametres

Providing and fixing P.V.C double equal branch with oval access door of supreme/ Finolex / Vectus / Relpipe (Reliance ) insertion rubber washer 3mm (three milimetre) thick bolts and nuts ISI marked including finishing with approved adhesive complete , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred ten milimetre) diametres

75 mm (Seventy five milimetre) diametres

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etccetra complete , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred ten milimetre) diametres

75 mm (Seventy five milimetre) diametres

Providing and fixing PVC offset 45° ISI marked including fixing with approved adhesive etc. complete. complete including fixing with approved adhesive etccetra complete , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred ten milimetre) diametres

75 mm (Seventy five milimetre) diametres

Providing and placing on terrace (at all floor levels) polyethylene water storage tank of Supreme / Finolex/ Vectus IS : 12701 marked, having 1000 ( one thousand) litres capacity with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (one cement isto four coarse sand isto eight graded stone aggregate 40 mm ( forty milimetre) nominal size) bedding for P.V.C. pipe of 150 mm ( one hundred fifty milimetre) diametres including necessary form work and curing complete , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:3:6(1 Cement : 3 Sand : 6 graded stone aggregate 40mm nominal size ) in haunching of PVC pipes of 150mm ( one hundred fifty milimetre) internal diameters, including concrete for beddings necessary form work and curing complete , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x120 x 5mm (six hundred into one hundred twenty into five millimetre) glass shelf continental series of Jaquar / Classik series of Hindware / Floral series of Cera / Vintage series of Kerovite & Hindon sereis of Jal with edge round off supported on anodised aluminium angle frame with CP brass brackets and guard rail complete fixed with 40mm ( forty milimetre ) long screws , rawl plugs etccetra complete , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 ( one cement isto four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement isto one decimal five coarse sand (zone- III) isto three graded stone aggregate 20 mm ( twenty milimetres) nominal size), foundation concrete 1:4:8 mix (one cement isto four coarse sand (zone- III) isto eight graded stone aggregate 40 mm ( forty milimetres) nominal size), inside plastering 12 mm ( twelve milimetres) thickness with cement mortar 1:3 (one cement isto three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement isto two coarse sand isto four graded stone aggregate 20 mm ( forty milimetres) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm ( ninety into eighty milimetres) and 45 cm (forty five centimetres) deep including C.I. cover with frame (light duty) 455x610 mm ( four hundred fifty five into six hundred ten milimetres) internal dimensions, total weight of cover and frame to be not less than 38 kg ( thirty eight kilogram) (weight of cover 23 kg ( twenty three kilogram )and weight of frame 15 kg ( fifteen kilogram) With Sewer bricks conforming to IS : 4885 , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 (one cement isto four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement isto one decimal five coarse sand (zone- III) isto three graded stone aggregate 20 mm ( twenty milimetres)nominal size), foundation concrete 1:4:8 mix (one cement isto four coarse sand (zone- III) isto eight graded stone aggregate 40 mm ( forty milimetre) nominal size), inside plastering 12 mm ( twelve milimetres) thick with cement mortar 1:3 (one cement isto three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement isto two coarse sand isto four graded stone aggregate 20 mm ( twenty milimetres) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 120x90 cm ( one hundred twenty centimetres) and 90 cm ( ninety centimetres) deep including C.I. cover with frame (medium duty) 500 mm ( five hundred milimetres) internal diameter, total weight of cover and frame to be not less than 116 kg ( one hundred sixteen kilogram) (weight of cover 58 kg ( fifty eight kilogram) and weight of frame 58 kg ( fifty eight kilogram) ) : With Sewer bricks conforming to IS : 4885 as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (one cement isto four coarse sand) C.I. cover with frame (light duty) 455x610 mm ( four hundred fifty five into six hundred ten milimetres) internal dimensions, total weight of cover with frame to be not less than 38 kg ( thirty eight kilogram) (weight of cover 23 kg ( twenty three kilogram) and weight of frame 15 kg ( fifteen kilogram), R.C.C. top slab with 1:1.5:3 mix (one cement isto one decimal five Fine sand isto three graded stone aggregate 20 mm ( twenty milimetres) nominal size), foundation concrete 1:5:10 (one cement isto fivefine sand isto ten graded stone aggregate 40 mm ( forty milimetres) nominal size), inside plastering 12 mm ( twelve milimetres) thick with cement mortar 1:3 (one cement isto three coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design Inside dimensions 455x610 mm ( four hundred fifty five into six hundred ten milimetres) and 45 cm ( forty five centimetres) deep for single pipe line : 19.30.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven decimal five) as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Vitreous China Flat back wash basin Delta No. 10010 size 55x40 cm ( fifty five into forty centimetre) of Hindware , Cera , Jaquar of star white / Snow white shade and as shown in the drawing / as per details with single 15 mm ( Fifteen milimetre) C.P. brass pillar tap with C.I. brackets, 32 mm ( Thrity two milimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x300mm (Six hundred into Three hundred milimetre) vitreous china division plate for urinals of Hindware /cera/Jaquar of star white / snow white shade i/c necessary fittings in all respect , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 20 mm ( twenty milimetre) nominal bore in trenches, galvanised mild steel tubes (medium grade), tube fittings of TATA / Jindal (earth work in trenches to be measured and paid separately) including carriage of material within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and Fixing Charomium plated 40mm (forty millimetres) dia steel pipe for grab bars at 78cm (seventy eight centimetres) height metres M.S. plate as per details at the position of the seat and Wash Basin complete , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 20 mm ( twenty milimetre) nominal bore to wall ceiling and floor galvanised mild steel tubes (Medium grade) of Tata/Jindal tube fitting and clamps including making good the wall, ceiling and floor complete , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 110mm ( one hundred ten millimetre) diametre ( to level or slope) approved adhesive of P.V.C. (D-Plast) sewer pipe of working pressure not less than 1.5 kg/ sqm ( one decimal five kilogram per squaremetre) including filling the joints with approved adhesive complete , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Provision for water lifiting pump 1.00 (one) H.P. including all necesary fitting , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm ( fifteen milimetres) nominal size bore mild steel tube including fititng , as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Ujjawal Singh

Ashwani Kumar

Naresh Padiyal