Shifting of Electricals Line and Beautification work at elevated road from Jhalwar road to Anantpura Flyover

SITC of architecturally designed pole (all designs to be approved by department)of Height 9mtr. Bracket with 5 arm Pole Thickness - 3.6 /3.2 / 2.6 / 2mm thickness, is designed for street lighting, suitable for various pendant type street light luminaires.This architecturally designed pole should be structurally sound. Pole design parameters very depending on the type of bracket and loading factor . Pole sections should swag and joint using special v groove technique by certified welders using high end MIG welding process, Coated with epoxy zinc phosphate primer and finished using environmental stable polyurethane based paint. Pole to be pretreated with shot blasting technique using steel shots ( grade - S280 ) + grid ( grade GP-25) material. Ratio to be used - 2:1 ratio ( for ex: 2 tones of shots we have to add 1 ton grid ). Built-in IP65 control box with cast aluminium service door and safety rope. The control gear tray is prewired with MCB, terminal connectors for loop-in loop-out arrangement. CE - Conformity mark. Electrical Junction box , Base plate 16mm thickness, J Bolt with 4 nos. of M20 Nut 4 nos of Plain washer with 500mm depth. 4 Elongated holes to suit M20 bolts at CC 215, Cable entry hole Ø70. Wind speed consideration (m/Sec) 50m/sec IS 875 part 3:1987, Material for tubes Steet of Grade Yst 210 to IS 3601, Material for base plate Steet of Grade E250 to IS 2062:2011 complete in all respect. Manufacturing of the pole should be customized for UIT Kota by manufacturer. Test report / certificates of manufacturer which are to be needed is to be submitted by contractor.(Make : K-lite/ Osram/Philips/ Bajaj/Lustre/HomeDeck and other equivalent make matching with above specification Enclosed drawing of pole only for just reference.) Pole Height 9mtr. Bracket with 5 arm

SITC of modern heritage post top luminaire(all designs to be approved by department) with 2 modules of 50W LED each, polycarbonate diffuser clear, Dimension A9 : Ø634 x 618 mm, A11 : Ø634 x 412 mm, A12 : Ø634 x 610 mm upgraded with high performance light engines. Aesthetically designed sturdy construction ensures a long life against all weather conditions,maintaining initial performances through the lifetime of the installation. IK Rating – IK07 CRI rating - >70, Safety class I, in built surge protection of 6KVA, Protection class : IP65. Designed for highest efficiency in terms of more lumens at reduced wattages WW (2x6127lm), CW ( 2x6223lm), NW(2x5899lm) type II LED lens. Product offered asymmetrical light distribution. The luminaire comprises of die cast aluminium top cover with Non yellowing, UV stabilised clear polycarbonate V diffuser and decorative supporting arms as per architectural design requirement Finished with pure polyester powder coated black finish complete in all respect .Test report / certificates of manufacturer which are to be needed is to be submitted by contractor.(Make : K-lite/ Osram/Philips/Bajaj/Lustre/HomeDeck and other equivalent make matching with above specification .Enclosed drawing of luminarie only for just reference.) modern heritage post top luminaire2X50W LED

SITC of architecturally designed pole (all designs to be approved by department) of Height 6 mtr with flower basket .Bracket with two arm . Pole Thickness approx- 3.2 / 2.9 / 2.6/ 2mm thickness, is designed for street lighting, suitable for various pendant type street light luminaires.This architecturally designed pole is structurally sound. Pole design parameters vary depending on the type of bracket and loading factor. Pole sections are swaged and joint together using special v groove technique by certified welders using high end MIG welding processes Coated with epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint Shot blasting using steel shots ( grade - S280 ) + grid ( grade GP-25) material. Ratio to be used - 2:1 ratio ( for ex: 2 tones of shots we have to add 1 ton grid ) Built-in control box with cast aluminium service door and safety rope. The control gear tray is prewired with MCB, terminal connectors for loop-in loop-out arrangement. CE - Conformity mark. Electrical Junction box 325 x 90 Base plate ?250 x 12thk, J Bolt with 4 nos. of M16 Nut 2 nos of Plain washer with 500mm depth. 4 Elongated holes to suit M16 bolts at CC 180, Cable entry hole Ø70. Wind speed consideration (m/Sec) 50m/sec IS 875 part 3:1987, Material for tubes Steet of Grade Yst 210 to IS 3601, Material for base plate Steet of Grade E250 to IS 2062:2011 complete in all respect . Manufacturing of the pole should be customized for UIT kota by manufacturer. Test report / certificates of manufacturer which are to be needed is to be submitted by contractor.(Make : K-lite/ Osram/Philips/Bajaj /Lustre/HomeDeck and other equivalent make matching with above specification Enclosed drawing of pole only for just reference.) Pole Height 6 mtr with flower basket .Bracket with two arm

Dismentalling of existing decorative pole with luminaire under jurisdiction area of KDA Kota with safely disconnecting wire and safe carriage to another site under jurisdiction area of KDA Kota and refix it to pre-existing foundation and rewiring of existing cable complete in all respect .

SITC of CCMS Controllers for timer-based street lighting panels. The system shall support various operational modes, including Immediate Control, Temporary Auto, User Defined Time, Astronomical with provision for offset adjustments, Astro Fix Mode, and Interval Mode with 24 interval for effective scheduling. It shall incorporate an inbuilt energy metering facility capable of measuring all essential three-phase electrical parameters such as voltage, current, power factor, active power, frequency, and energy, with a minimum accuracy of Class 1, in compliance with IS13779 standards and shall operate on a three-phase power supply with a voltage withstand capability of up to 500 VAC. The controller must include built-in protections for under-voltage and over-voltage conditions and incorporate a battery backup system capable of supporting operations for three to six hours. Inbuilt GSM/GPRS/4G modem featuring 2G fallback capability. The controller shall also include a real-time GPS-synchronized clock, with lithium-ion battery backup for RTC operations. It shall have RS485 communication support for external display. The controller shall offer phase wise control outputs and a minimum of 1024 onboard data memory backup. The CCMS Controller must be type-tested by a NABL-accredited laboratory for EFT (Electrical Fast Transient)/burst immunity in accordance with IEC 61000-4-4 standards. Furthermore, the system shall be operable via an Android/iOS mobile application and web-based software platform, developed indegenously using a low-code/no-code framework to facilitate ease of customization and integration with other IoT hardware shall be supported. The software must have successfully undergone Vulnerability Assessment and Penetration Testing (VAPT) as per OWASP Top 10 (2021 and 2022), SANS CWE 24, and CERT-In standards. A dedicated IoT SIM card (GSM/GPRS) with a minimum of three years of data services shall be provided for 4G communication along with three years of data hosting and server maintenance charges shall be included in the scope of supply. Make- Pyrotech, Eutopia, Casper etc and make to be approved by department

Supply and erection of P.C.C. pole as per REC manual no 15/1979 (ammended upto date) and as per latest Discom specifications with factor of safety 2.5 including excavation of pit upto pole planting depth 1/6th of pole length. and back filling with stone aggregate/boulders and soil by ramming and watering etc complete as required. All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 9.0 Mtr long PCC pole of 200 Kg Working Load

Supply and fixing of 11kV Disc insulator and Hot dipped galvanized Hardware confirming to IS:731:1971 with latest ammendment and as per latest Discom Specs. on existing bracket including all accessories etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

B & S type hardware 45 KN

B & S disc insulator 45 KN

Supply and fixing of 'V' type cross arms with top hamper and clamps as per latest Discom specifications made of MS angle on the existing poles complete including all necessary nut and bolt, clamps with two coats of Red oxide and two coats of Aluminium paint etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR