SPECIAL REPAIR TO ROOF TREATMENT OF BLDG NO T-355 AND T 358 AMN SHED OF FASF AGARTALA AT MIL STN AGARTALA

Amount

Schedule'A' Part-I: B&R works

Dismantling of AC sheet corrugated / CGI corrugated sheets in roofing any gauge and any thickness including ridge, valley/gutter etc.

Dismantling timber boarding of any description fixed in any position.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Roughening surfaces of old concrete floor by picking, sweeping clean & washing down with water to remove dust etc and brushing neat cement slurry at the rate of 3 kg per sqm.

Taking down chowkats or frames but with shutters (without taking off shutters from the frames) n.exc 1.5 sqm each.

Hacking out old broken glass ( any thickness, sizes, quality or description) from wooden frames or glazed with putty or fixed with beads

S&F sheet glass of 4 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sqm but in frosted.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified.

S&F Fe-410-W(Gde-E-250) quality-B roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee,angle,chanel or flat sections) including distance pieces, cleats etc.

Cutting holes in to brick wall for inserting bold fast & making good dismantled portion in cement mortar (1:3) or PCC (1:2:4) type B1, exe half brick but not exe 1 brick.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay complete all as directed.

M&L mild steel work such as grills, guard bars etc and similar work conforming to Fe290 GDE E-165

M & L for two coats of whitewash over a coat of primer after preparing the new surfaces of wall

M&L for 2 coats of synthetic enamelled paint over coat of red oxide zinc chrome on steel surfaces over 10cm width or girth including preparation of new surfaces.

M&L for 2 coats of synthetic enamelled paint over coat of red oxide zinc chrome on steel surfaces over 10cm width or girth including preparation of old painted surfaces.

M & L for Painting in wooden surfaces with two coats synthetic enamel paint over a coat of pink primer incl preparations of old painted surfaces over 10 cm width or girth.

M & L for Painting in wooden surfaces with two coats synthetic enamel paint over a coat of pink primer incl preparations of new painted surfaces over 10 cm width or girth.

M&L machine cut kota stone slab flooring 20 mm thick over screed base including cutting & polishing etc complete including 20 mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as directed.

All as per item No. 19 above but as in dado/skirting, riser etc cut to required size complete 10mm thick screed bed to wall in cement mortar (1:4) complete all as directed.

M&L 15mm thick rendering in cement mortar (1:3) on concrete surfaces with integral water proofing compound @ 3% by wt of cement,(Water compound measured & paid separately) finished even and fair.

Supply only integral water proofing compound

S&F 2nd class Hard wood 20 mm thick boarding planed both side with butt joints fixed with nails in any situation

Material & Labour for writing letters or figures (block, Roman, Italic or Indian) n.exc.30 cm high complete all as specified and directed.

M/S PAUL ENTERPRISE

M/S C.S.P. ENTERPRISE

M/S New Saha Enterprise

SHRI RAJESH DEY

M/s Amrit Gope