Annual Maintenance of various buildings civil works of PDC Complex Parnai HEP Draba Surankote

Amount

Repair to plaster of thickness 12mm to 20mm in patches of area 2.5 sqm and under including cutting the patch in proper shape raking out joints and preparing and plastering the surface of walls complete including disposal of rubbish to the dumping ground within 50mts lead. with cement mortar 1:4 (1cement : 4coarse sand)

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in- charge: 1:3:6 or richer mix (i/c equivalent design mix)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make,(NITCO, ORIENT, SOMANY, KAJARIA) or equivalent make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make,(NITCO, ORIENT, SOMANY, KAJARIA) or equivalent make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make,(NITCO, ORIENT, SOMANY, KAJARIA) or equivalent laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete .In colour such as White, Ivory, Grey, Fume Red Brown

Providing and fixing 12 mm thick flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete (frame work to be paid separately)

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). First class kail wood 35 mm

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick Particle Board 12mm thick Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides Conforming to IS : 3097 grade 1

b) 4 mm thick glass pane (weighing not less than 10 kg/sqm)

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : First class deodar wood

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete 20 mm dia

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to steel windows by welding

Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2

Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete : Size - 250 x 16 mm

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : For Doors 200 x 10 mm

(b) For Windows & Vents 100 x 10 mm

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. For doors 125mm

For Windows & Vents 100mm

Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :Twin rubber stopper

Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete : For doors

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1mm thick

a) Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

b) Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work.

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood

Providing and fixing M.S hook and eye ISI mark medium welded at L.M.R 150 mm long

Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution.

Engagement of of labour for clearence of rubbish /jungle/ earth etc. ( to be paid actual)

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with.1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form work for: Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and medium tensile steel bars

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade 18mm thick (Area of slab over 0.5 sqm)

Providing 18 mm thick block board with commercial ply veneering on both sides

Providing and fixing 6mm thick coir veneered board

Providing and fixing ply wood 4mm thick one side decorative veneer conforming to IS: 1328(type 1), for plain lining/cladding with necessary screws, including priming coat on unexposed surface with. Decorative veneer facings of approved manufactures

Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters including fixing with necessary screws etc. complete Double strip (Horizontal type)

Providig and fixing Plain Eaves Borading. 2nd class Kail wood 250x32 mm (nominal size )

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60mm thickness, including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.60mm pressed, mild steel welded or rigidly fixed together by mechanical means, including M.S pressed butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile C Fixing with adjustable lugs with split end tail to each jamb

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete Welded Angle section 40x40x6mm

a)Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

b) Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

a)Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand)

b)Extra for half Brick masonry in superstructure above plinth level upto floor V level.

Random Rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including levelling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) and curing complete at window sills, ceiling level and the like (Quarry Stone) Cement mortar 1:6 (1 Cement : 6 coarse sand)

12 mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 coarse sand)

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate.

Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) Ordinary cement without any pigment.

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:Kiln seasoned and chemically treated hollock wood 50x12mm

Providing and fixing IS : 1341 marked M.S. heavy weight - Butt Hinges with necessary screws etc., complete 125x90x4.00 mm

White washing with lime to give an even shade Old work (two or more coats)

Supply of labour for repair works at different locations within PDC Complex a)Mali/ sewerman

b)Carpenter ist class

c)Mason (for brick work) 1st class

d)Painter

e)coolie/ labour

f)Technician/electrican

g)Mistry/Plumber

h)Blacksmith 1st class/welder

Carriage of materials

Sand with average distance of 07 kms by MT

Stone Aggregates with average distance of 07 kms by MT

cement with average distance of 01 kms by MT

Bricks with average distance 120 km

Stone with average distance 15 km

Providing and fixing white Vitreous china pedestal type water closet (European type W.C. pan) with seat and lid C.P brass wings and rubber buffers, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) conforming to I.S 7231 with all fittings, C.I/M.S brackets 40mm dia flush bend, with fittings and clamps, over flow arrangement with specials and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors where ever required: W.C pan with ISI marked white solid plastic seat and lid.

(a)Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

(b)Providing and Fixing white vitreous China Pedestal for Wash basin completely reccessed at the back for the reception of pipes and fittings.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 600x 120 x 5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P brass brackets guard rail complete fixed with 40mm long screws , rawl plugs etc complete

Providing and fixing Salem Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S 13983 with C.I brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls where required a)with out Drain board 610 x 510 mm bowl depth 200 mm

b)Kitchen sink with drain board 510x1040mm bowl depth 200mm

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work-Exposed on wall . (a) 15mm dia nominal bore medium

b) 20mm dia nominal bore medium

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) a)15 mm dia. nominal bore medium

b)20mm dia nominal bore medium

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) a)40mm dia nominal bore

b)65mm dia nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete (a) 15mm nominal bore

(b) 20mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) a)40mm dia nominal bore

b)65mm dia nominal bore

Providing and fixing solid plastic seat with lid for pedestal type WC pan complete (Hindware/Cera) white solid plastic seat with lid.

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Cutting holes up to 30x30 cm in walls including making good the same: 19.67.1 With common burnt clay (non modular) bricks

(a) Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

(b)Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 893

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in- charge.

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required a) 15mm nominal bore

b) 20mm nominal bore

c) 40mm nomnal bore

d) 65mm nomina bore

Providing and fixing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and base support for tank( sintex, Eletroplast, Star, Lotus or equivalent having valid ISI License

Providing and fixing uplasticized PVC connection pipe with brass unions 45 cm length 15 mm nominal bore

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.Single socketed pipes a) 75 mm diametre

b) 110 mm diametre

Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. a) Coupler 75 mm

b)Single tee with door 75x75x75 mm

Single tee without door 75x75x75 mm

Bend 87.5° 75 mm bend

110 mm bend

Shoe (plain) 75 mm shoe

110 mm shoe

Waste coupling 31mm of 79 mm length and 62 mm breadth weighing not less than 45gm

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete Semi rigid pipe 32 mm dia

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour:450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.

Providing and fixing PTMT grating of approved quality and colour.125 mm nominal dia with 25mm waste hole

Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity -White

Providing and Installation of Electric water heating geyser preferably Havels/ Bajaj/Venus or equivalent make with following technical specifications 1. Wattage - 2000w, 2. Voltage - 230v, 3. Capacity - 25 litres. Along with allied fittings as per requirement complete all as specified and directed by Engineer- incharge.

Providing and Installation of self priming mono-set pumps preferably Crompton Greaves/ havels/kirloskar or equivalent make with following technical specifications 1. Power - 0.75kw/ 1 HP, 2. Voltage - single phase 220v, 3. Size - 25mm/25mm 4. Head - 39m-40m, 5. Discharge – 3000 LPH/75 GPH. Along with class allied fittings as per requirement complete all as specified and directed by Engineer- incharge

Supplying and fixing following way, single pole and neutral , sheet steel , MCB Distribution board , 240 volts , on surface /recess ,complete with tinned copper bus bar , neutral bus bar, earth bar , din bar , interconnections , powder painted including etc. as required (But without MCB/RCCB/Isolator) 8 way , Double door .

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (a) Single pole

(b) Single pole and neutral

Providing and fixing 25 mm x5 mm G.I. strip on surface or in recess for connections etc. as required.

1.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable

2.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable

4 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable

6 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable

10 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable

20 mm dia. ISI marked, PVC conduit

S.P. 5/6 amps, one way modular switch, ISI marked

S.P. 15/16 amps, one way modular switch, ISI marked

3 pin 5/6 amps modular socket outlet, ISI marked

6 pin 15/16 amps modular socket outlet, ISI marked

S.P. 5/6 amps, one way switch, piano type ISI marked

S.P. 15/16 amps, one way switch, piano type ISI marked

3 pin 5/6 amps socket outlet, piano type ISI marked

6 pin 15/16 & 5/6 amps socket outlet, piano type ISI marked

Supply and fixing of following electrical items suitable for operating on 240/230V AC, 50HZ supply. (Havels, Bajaj, Philips Anchor, or equivalent) complete as directed. (a) Holders

(b) Led lamp 09 w

(c) Tube lights (T5) complete with fittings

d) Tube Rod only

e) Ceiling Fan

Fan regulator electronic dimmer type A.C 240v, 5 steps including connection. (Havel’s/Anchor/ISI mark).

Supply and fixing of following electrical items suitable for operating on 240/230V AC, 50HZ supply. (Havels, Bajaj, Philips Anchor, or equivalent) (a) Ceiling fan 1200 mm sweep

1100 volt grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC take and overall PVC sheathed 25 sqmm fixed to wall or as directed.

Repair of geyser including replacement of heating element and other allied items, compete job done

Providing and fixing following protection Equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required. (a) MCCB-63 Amp 4 pole with enclosure

(d)Changeover 63 Amp(ICSPN) 2 Pole

SHOKET ALI