Construction Of A New Toilet, Rest Room and Gallery From The Chamber Of District Magistrate To Auditorium Next To The Auditorium Of Collectorate Office Bahraich

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in charge.

Brick Work 1:4 Cement / Coarse Sand Mortar In Super Sturcture.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

12mm thick plaster in cement & fine sand of 1.25 fineness modulous mortar in 1:4 Including supply of all materail labour T&P required for proper completion of the work.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete.

FINISHING WITH DELUXE MULTI SURFACE PAINT SYSTEM FOR ENTERIOR AND EXTERIOR USING PRIMER AS PER MANUFACTURER SPECIFICATIONS.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : In cement mortar.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Supply & Fixing Of Masquito Jali.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Supply & fixing PVC pipe 110mm.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately)

P/F Teak wood panel work for door,window,ventilators and partion etc as per architectural drawings and tha directions of engineer in charge.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick (Float glass panes), 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm).

Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.(With 2nd class teak wood beading 62X19 mm).

Sitkani 8"

Sitkani 6"

Belan 12"

Handle 6"

Handle 5"

Kabja 6"

Kabja 4"

Gate Hook 6"

Screw 1.5"

Screw 1.25"

Door Closer

Other Hidden Miscellenous Work.

Wiring points for light with 1.5 sq.mm. FR PVC insulated multistrand single core copper conductor cable in H.G.PVC conduit concealed in the wall with 14 SWG copper eath continity wire,piano type switch & ceiling rose/angle/batten holder on 3 mm thick phenolic laminated backlite sheet etc complete in all respect as directed including matching colour wah as per SI.No.131(c).

Wiring points for two ways light with 1.5 sq.mm. FR PVC insulated multistrand copper conductor cable in H.G.PVC conduit concealed in the wall with 14 SWG copper eath continity wire and two number two way piano type switches & ceiling rose/angle/batten holder on 3 mm thick phenolic laminated sheet etc complete in all respect as directed including matching colour wah as per SI.No.132(c).

Wiring points for fan / fresh air fan (light duty exhaust fan ) with 1.5 sq.mm. FR PVC insulated multistrand single core copper conductor cable in heavy gauge PVC conduit concealed in the wall with 14 SWG copper eath continity wire, piano type switch & ceiling rose on 3 mm thick phenolic laminated backlite sheet etc complete in all respects including matching colour wah as per SI.No.133(c).

Wiring points for plug with 1.5 sq.mm. FR PVC insulated multistrand copper conductor cable in heavy gauge PVC conduit pipe concealed in the wall complete with 14 SWG copper eath continity wire, piano type switch & socket etc complete in all respects including matching colour wah as per SI.No.134(c).

Wiring points for exhaust fan with 1.5 sq.mm. FR PVC insulated multistrand copper conductor cable in heavy gauge PVC conduit pipe concealed in the wall complete with 14 SWG copper eath continity wire,15A piano type switch & ceiling rose on 3 mm thick phenolic laminated backlite sheet etc complete in all respects including matching colour wah as per SI.No.137(c)

Supply and fixing of switch box made up of 16 WSG (1.5 mm) M.S.Sheet of 150mm x 150mm x 65mm size duly painted with red oxide primer and flushed in wall including cutting of brick work,fixing it to the level with cement sand mortar,including matching colour wash with supply of all material,labour and T&P required for proper completion of the work as direrected at site by the Engineer in charge as per SI.No.160.

Supply and wiring of submain with two numbers 2.5 sq.mm FR PVC insulated multistrand copper conductor cable in 20 mm dia heavy duty (2 mm thick) PVC coduit concealed in wall,complete with one number 14 SWG copper earth continuity wire including matching colour wash etc.,complete in all respects.

Supply and wiring of submain with two numbers 4 sq.mm FR PVC insulated multistrand copper conductor cable in 20mm dia heavy duty (2 mm thick) PVC coduit with one number4.00 sq.mmFR PVC insulated multistrand copper conductor as earth continuity wire including matching colour wash etc.,complete in all respects as per SI.No.217(c).

Supply and wiring of submain with two numbers 6.00 sq.mm FR PVC insulated multistrand copper conductor cable in 20mm dia heavy duty (2 mm thick) PVC coduit with one number4.00 sq.mmFR PVC insulated multistrand copper conductor as earth continuity wire including matching colour wash etc.,complete in all respects as per SI.No.218(c).

Supply and fixing of single wall light bracket made of brass on matching polished MDFEG board brass including connection etc.as required.

Supply and fixing of 240 volts'L'series miniature circuit breaker 5 Amp.to 32 Amp (10KA) in existing MCB.DB complet with cnnections as required as per SI.No.1002 CAT A.

Supply and fixing of 8 ways SPN distribution board without MCB complete in all respect,as directed at site by Engineer in charge as per SI.No.1024.

Erection and testing of ceiling fan and regulator for room height upto 3.5 mts.including supply of 3 mm thick G.I.down rod 19 mm dia duly painted complete in all respect as per SI.No.1116.

Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts nuts and washers etc.complete in all respect as per SI.No.1120.

Supply and fixing of power plug with 15Amp/250Volt flush type witch and 5 pin 15 A/250 Volt flush type universal socket switch in suitable M.S.box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick with brass machine screw and cup washer as per SI.No.1139.

Supply and fixing of electronic fan regulator 120-280 watt,ISI marked,on the existing switch board including making connections,required material labour and T&P etc. for proper completion of the work to the satisfaction of Engineer in charge of work as per SI.No.1203(A)

Supply and fixing of 23 watt CFL approved make etc.complete as required.

S/F of 1200 mm Sweep Ceiling Fan made with double ball bearing…complete item (Make Khaitan, Polar, Bajaj etc.) Sch no-1501

Supply and fixing of LED Tube Light with Metal heavy duty Box type batten Light fitting 1X22 watt suitable for upto 1X22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in all respect.CAT. - AAA

Supply & fixing of recess mounting Sqare 36 watt LED down Lighter having Powder coated die cast aluminium housing with heat sink , diffuser /reflector and driver set complete in all respect.CAT. - AAA

Supply & fixing of 225/300mm sweep ventilating (Light Duty) exhaust fan complete with Metallic Blade (Steel bird guard protector /Copper motor for high air suction performance /Capacitor etc.), Noise level : (45 - 50) dB, Power consumption : 45 W, Rated voltage : 230 V, Rated frequency : 50 Hz, Motor type : Normal Speed. Complete in all respect.

Earth Work In Surface Excavation Not Exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and didposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge: All Kinds of soil.

P/L in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level 1:1½:3 ( 1 cement : 1½ coarse sand (zone - III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Providing and laying in position cement concrete of specifed grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 ( 1 cement : 2 coarse sand (zone - III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources).

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in : Cement Mortar 1:6 (1 Cement : 6 Coarse Sand).

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in : Cement Mortar 1:4 (1 Cement : 4 Coarse Sand).

12mm Cement Plaster Finished With a floting coat of neat cement of mix : 1:3 (1 cement : 3 fine sand).

Providing and laying in position specified grade of reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel Reainforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing in Position And Binding All Complete Upto Plinth Level : Themo-Mechanically Treated Bars Of Grade Fe- 500D or more.

Supply and laying of 40 mm gauge Brick Aggregate (Single size) : 40mm nominal size T&P etc.for proper completion of the work.

Providing M.S. Foot Rests Including Fixing in Main Hole With 20X20X10 cm cement concrete blocks 1:3:6 : With 20X20 mm Square Bar

Providing And Fixing Of Soil, West And Vent Pipes: 75 mm diameter.

Providing And Fixing Terminal Guard: 75mm, Sand Cost iron S&S as per IS - 1729.

Providing And Fixing in position pre-cast R.C.C. Manhole cover And frame of required shape and approved quailty : H D - 20, CircularShape 560 mm internal diameter.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets,40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid.

White vitreous China Flat Back was basin size 550x400 mm with single 15 mm C.P. brass pillar.

Providing and fixing 600x450 mm beveled edge mirror of superior glass(of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with CP brass screw and washers complete.

Providing and fixing PTMT towl rail complete with brackets fixed to wooden cleats with CP brass screw with concealed fitting arrangement of approved quality and colour. 600 mm long towl rail length of 645 mm width 78 mm and effective height of 88 mm weighing not less than 190 gms

Providing and fixing PTMT liquid soap container 109 mm wide,125 mm high and 112 mm distance from wall of standered shape with brackets of same material with snap fitting of approved quality and colour weighing not less than 105 gms.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require.

Providing and fixing soil,waste and vent pipes ( 75 mm dia centrifugally cast iron S&S Pipe).

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work, including cutting chases and making good the walls etc: Internal work. 25 mm dia nominal bore(medium duty).

15 mm dia nominal bore

20 mm dia nominal bore

Providing and fixing 45 cm long unplasticised PVC connection pipr with brass unions : 15 mm dia nominal bore.

Providing and fixing CP brass bib cock of approved quality conforming to IS 8931 : 15 mm dia nominal bore.

Providing and fixing CP brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms : 15 mm dia nominal bore.

Providing and fixing ball value(brass) of approved quality complete( High or low pressure with plastic floats) : 25 mm dia nominal bore.

Providing and fixing gun metal gate valve with wheel of approved quality : 25 mm dia nominal bore.

Providing and fixing brass stop cock of approved : 20 mm dia nominal bore.

Providing and placing on terrace( at all floor levels) polythene water storage tank of approved brand and manufactutre woth coved and suitable locking arrangement and making necessary holes for inlet outlet and overfloe pipes but without fitting and basr support for tank : Capacity 1000 ltr.

Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels/tiles of size 595 x 595mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e.vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of 50mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50mm wide (90 metre )roll and two coats of primer suitable for panelling as per manufacturer's specification as per direction of Engineer-in-Charge all complete. With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles.

Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on inter-locking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6mm reveal profile (white/black),comprising of main-T runners of size 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items(galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm.Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles.

Due to 5% As per guideline