Repairing & Renovation works for start Full-fledged Sonography center & Interventional Radiology OPD Services at Ground floor of G Block @ SMIMER Hospital, Umarwada, Surat”

Name of work :- Repairing & Renovation works for start Full-fledged Sonography center &

Interventional Radiology OPD Services at Ground floor of 'G' Block @ SMIMER Hospital, Umarwada,

Description Qty. Rate per Amount

1 Dismentaling tiled of stone floors laid in mortar including stacking of

serviceable materilas and disposal of unserviceable materials with all lead 186.00 50.11 SM

2 Demolition of brick work and stone masonry including stacking of

serviceable materials and disposal of unserviceable materials with all lead 4.02 577.92 CM

and lift. (i) On Cement Mortar.

3 Removing and scraping of old deteriorated plaster of any thickness from

wall / RCC member including stacking of serviceable material and disposal 407.00 20.55 SM

of unserviceable from site of work with all lead and lift.

4 Demolition including stacking of serviceable materials with all lead and lift.

5 Dismentling door, windows, ventilators etc. (wood or steel) shutters

including chowkhats architraces, holdfasts and other attacement etc.

complete and stacking them within all lead and lift. (i) Exceeding 3 Sq.M.

6 Dismantling sanitary fittings like wass basin, W.C. pan Indian and European

type, flushing tank etc. including stacking the materials with all lead and lift.

7 Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. inCement Mortar 1:6 (1- Cement : 6- 33.00 4729.83 CM

fine sand)(C) Fly Ash Bricks -Ground Floor

8 Half brickmasonry in commonbrunt clay buildingbricks having crushing

strengthnot less than 35Kg/Sq.Cm. in Cement mortar 1:4(1-Cement :4 65.00 712.81 SM

coarse sand ) in foundation and plinth (C) Fly Ash Bricks-Second Floor

9 Providing & Applying 10mm.th.cement plaster in single coat on

brick/concrete walls similar surfaces for plastering & finished even &

smooth with afloating coat of cement slurrymixedwith admixture of lime or 529.00 199.28 SM

neeru in required proportion etc. comp. in C.M1:3(1cement :3sand)

(A)Forwall and similar surfaces -Ground Floor

10 Providing & laying granite slab18mm thick in flooring, treads of steps and

landing laid on bed of 20 mm thick cement mortar 1:6 (1Cement :

coarsesand) or lime mortar1:1.5 laid and finished with flush pointing in 10.00 2410.00 SM

white or colour cement including rubbing and polishing complete. (Basic

Rate: Rs.1347.46/S.M.)

11 Providing& laying granite slab18mm thick in skirting, risers of steps, dedo

and pillars laid on10mm thick cement mortar 1:4 (1Cement : 4 Coarse sand)

and finished with flush pointing in white or colour cement including

rubbing & polishing comp.. (Basic Rate:- Rs.1347.46/S.M.

12 Providing & laying granite slab18 mm thick in Window-Door seal Frame

Etc laid on10 mm thick cement mortar1:4 (1Cement :4 Coarsesand) with

nessary adhesive material and finished with flush pointing in white orcolour 25.00 2026.00 SM

cement, including rubbing & polishing comp.. (Basic Rate:-

13 Fullbody Virtified Tiles in Flooring: Providing & laying Premium quality

Fullbody vetrified tile 10 - 15 mm thick Glossy/ Matt finish of any colour of

Kajaria, Nitco, Somani, Restile, Qtone, Sunheart, Simpolo, Mozart, Eslab,

Varmora, Emcer or equivalent make in flooring, treads of steps & Landing

laid on base of cement mortar 1:4 (1 Cement : 4 Coarse sand) of adequate

thickness and 8-10mm adhesive material (notching method) on mortar base

coat including dismentaling of existing flooring and joint with colour

cement slurry including finishing with flush pointing & cleaning the surface

etc. Durability - 77/130N comp. Size 800 x 1200/ 600 x 1200, 600 x

Tiles should be lays after on solid base (mini. 24 hour)s of mortar with

cement adhesive and use method as per tile company. (Not withstanding any

contain with prevelling rate at the time of execution) (Colour and Size may

be very as per architect selection or suggestions and instructions) (Basic

Rate- Rs. 807.00/S.M. with GST)

14 Fullbody Vitrified Tiles in Dado: Providing & laying Premium quality

Fullbody vetrified tile 8-10 mm thick Glossy/ Matt finish of any colour of

Kajaria, Nitco, Somani, Restile, Qtone, Sunheart, Simpolo, Mozart, Eslab,

Varmora, Emcer or equivalent make in skirting, risers of steps and dedo laid

on 10 mm thick cement mortar 1:2 (1 Cement : 2 Coarse sand) base coat

and 4-6mm adequate appropriate adhesive (notching method) and finished

with flush pointing in white or colour cement comp. or fixing on existing

flooring by adhesive material including dismentaling of existing flooring

and jointed with colour cement slurry including finished with flush pointing

& cleaning the surface etc. For All Floor Levels Durability- 77/130N comp.

Size 600 x 1200/ 600 x 600 (Not withstanding any contain with prevelling

rate at the time of execution) (Colour & Size may be very as per architech

selection or suggestions and instructions) All Floors. (Basic Rate- Rs.

807.00/S.M. with GST)

15 Providing & fixing Powder Coated Aluminium partly glazed and partly

panelled partition using medium duty sections of Hindalco,Zindal,

Narmada, Banco or Equivalent approved make having section 63.50 mmx

38.10 mm (Frame-.758kg/rmt & Middle section-0.819Kg./rmt),Galzing Clip

with 5mm thick clear float glass of approved make including all other

necessary fittings and fixtures.Entire work will have to be made water proof

using necessary rubber sectioned wherever required. Gapsall round the

frame to be filled with approved waterproof sealent.Bottom portion of doors

both side to be covered with 12 mmt hick prelaminated particle boardof

approved make and quality and as per design.

16 Providing & fixing partly panel & partly glass Powder Coated Aluminium

doors with aluminium section of Hindalco, Jindal , Narmada,Banco or

Equivalent approved make having Powder Coated outer frame Leg

Partition section of 63.50 mm x 38.10 mm having weight 1.158 kg. /

R.M. shutter section having size 83.5 mm x 44.45mm ( top &

bottom: 1.384 kg./rmt. and middle 1.139 kg./rmt.) door vertical 47.62mm x 5.00 3237.00 SM

44.45 mm ( vertical:0.881 kg./rmt. & top hing side:0.974 kg./mt.),

Glazing Clip (Jindal Section No. 19370 Wt. 0.109 Kg./ Mt.) with 5mm

thick sheet glass in acid frogting and 12 mm thick prelaminated sheet of

Greenlam, Panama or archid make as approved by Engineer-incharge

including fixing brass pivot, handle, lock etc. complete.

17 Providing and fixing window having extruded aluminium Powder Coated

section frame main outer size 63.50x38.10x1.95mm (of Jindal

sectionno.4605,@Wt. 1.094Kg/mt)horizontal Two track member size

61.85mm x 31.75mm x 1.20mm (of jindal sectionno:8687,@Wt.

0.695Kg/mt.) vertical member of size 61.85mmx 31.75mm x130mm(of

jindal sectionno:8758@wt. of 0.659kg/mt) with sliding shutters of

horizontal member size 40mm x 18mm x1.29mm ( of jindal section 5.00 1705.67 SM

no:8949,@ Wt.of .456Kg/mt) vertical member of size 40mm x 18mm x

1.29mm (of jindal section no: 8947, @ Wt.of 0.456Kg/mt/section

8948,@Wt.of0.457Kg/mt) with 5mm thick tranparent bronze colour tineted

float glass with powder coated aluminium fittings and fixtures and

transparent silicon sealant glass fixing to frameas per details etc. complete

18 Providing and fixing standared extruded of alluminium section of size

63mm x 38.10mm x1.2mm , @ Wt. 0.643 Kg/mt with colour Powder

Coated alluminium frame for ventilation with 5 mm thick frosted glass as

details etc complete for Ventilation

19 Providing & Fixing door closer Ozon / Dorma / Hyper / Hardwin / Godrej

Alluminium body ISI brander equivalent make with necessary hardware 15.00 1148.00 SM

materials etc. complete as per instruction by engineer in charge.

20 Providing & fixing 35 mm.th. Flush Door Solid Double Core type Both

Face water proof Ply Vennered & 1.5 mm th. laminate shall be pasted on

both side with adhesives as specified by the manufacturers. The laminate

shall be as per approved shade & texture, of make incl. Sal wood frames of

finished size 12 cm x 7 cm. incl. S.S. Hinges with nessary screws &

Anodized aluminum fixtures & fastenings For all Floor

21 Providing and fixing S.S. wire mosquito jali as per specification by

engineer in charge.

22 Prov. & fix.Wooden office table with all outer & inner plywood surface

covered by 1mm th. laminate finish using 18mm th.Vertical, horizontal and

shutter, 12mm th.Back drawer, 06mm th.Drawer bottom commercial

plywood approved make, 01 mm th.Sf. Finish laminate, 8mm th.Back

painted glass top, teakwood liping, brass hinges, SS handle, lock abco

make powder coated key board, magnate & necessary hardware materials

etc. inside and liping french polish finish complete in all respects by

engineer in charge.

23 Prov. & Fixing Laminated Door of Marble/ wall storage shutter with

teakwood frame using with 19mm th. BWP plywood, 1mm th. SF laminate,

teakwood edge biding, ss handles, hinges, magnate, lock & necessary 74.00 4223.00 SM

hardware, serews materials etc. complete as per instruction by engineer in

24 Grid Ceiling: Providing and fixing in True Horizontal level 600 mm. x

mm. false ceiling in 24 mm C.B Grid system manufactured by GYPTECH

or Eq. Brand using hot dipped galvanized steel Section, Exposed Surface

with pre coated capping, Main Tee of size 24 mm x 32 mm., having

mm Gauge at every 1200 mm Center to Center Maximum and Rotary

Stitched Cross Tee of size 24 mm x 26 mm, having 0.30 mm Gauge at every

600 mm. c/c. and Sub Cross Tee of size 24 mm x 26 mm, having 0.30 mm

Gauge at 1200 mm c/c. and wall angle of size 24 mm x 24 mm., having

mm Gauge fixed to the periphery of the wall. The above grid is suspended

with 50 x 50 x 2 m thk. Jindal or Eq. make Aluminium Angle fix with 186.00 1995.00 SM

necessary Anchor Fastner on Slab Bottom Longer Span with Accessories

such as Nuts, Bolts, Washer, Fastners etc. in both directions. Gyptech Vinyl

Laminated Gypsum Panel Square Edge Ceiling tiles manufactured by

GYPTECH or Eq. Make, of size 595 mm x 595 mm x 12 mm thermal

conductivity k = 0.16 W/m.K, having Moisture Resistance & Fire

Protection, having lighter, smoother and more uniform Texture shall be laid

evenly. The vinyl finish on the Gypsum panels Seals out Moisture, Bacteria,

Dirt and Odors. Lay in the modulus for the flush look incl. All Materails,

Labour, Scaffolding, etc. complete as per instructions of Architect..

25 NOTE :- (1) The whole work is to be executed through specialized agency

with a guarantee of 10 (Ten) years given on a prescribed proforma duly

stamped. (2) The rate shall include for work at all floors & conducting

water proof test as directed. (M.R.)

(B) Providing and laying integral cement based water proofing

treatment including preparation of surface as required for treatment

of roofs, balconies, terraces etc. consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement using

kg/sqm of cement admixed with proprietary water proofing

compound comforming to IS:2645 over the R.C.C. slab including

cleaning the surface before tratment.

(b) Laying cement concrete using broken bricks/brick bats 25 mm to

100 mm size with 50% of cement mortar 1:5 (1 Cement : 5 Coarse

sand) admixed with proprietary water proofing compound

conforming to IS:2645, brick bats is finally covered by jointless

cement plaster 20mm th. in C.M. 1:4 added with special water

proofing compound confirming to IS:2645 & top smooth finished

with trowel with false chequered marking of 300 mm.size. The

treatment is carried along the vertical surface of the parapet & other

adjoining wall up to height of about 300 mm in a shape of quarter

round vata Incl. curing etc. Comp. With average thickness of 120mm

and minimum thickness at khurra as 65 mm.

ALL FLOORS 3.00 511.00 SM

Providing and filling in depressions of Bath and W.C. At all floor

levels, after completing plumbing work of pans, pipes,traps etc.with

cinder or fly ash as directed by Engineer in charge etc. comp.

ALL FLOORS 0.74 500.00 CM

27 Providing & laying C.C 1:3:6 (1cement : 3coarse sand : 6 Crushed

stoneagg 20 mm Nominalsize) & curing comp. excl. cost of 1.00 3095.25 CM

formworkin:(a) foundation & Plint

28 Providing and fixing Wall Hung Wash Down Water closet

European type W.C. pan with PP Soft Close Slim seat cover,

integral P or S trap with including jointing the trap with soil pipe in

cement mortar 1:1 (1 cement : 1 find sand). Make- Rimless, Blind

Installation wall hung, Company-Jaquar, Product Code - SLS-WHT-

6953BIPPSM. (Size: 375 x 520 x 400 mm)

ALL FLOORS 1.00 14162.00 EACH

29 Providing & fixing counter wash basin, at all floor levels. (FOR GRANITE

COUNTERS MORE THAN 750 MM IN LENGTH) Make - OVAL, SIZE: 1.00 2561.57 EACH

560x400x205 mm, PRODUCT CODE: S2030103

30 Providing & fixing Wash Hung basin with single hole for pillar tap,

Size- 550x400 mm at all floor levels, with C.I. or M.S. Brackets

painted white incl. cutting holes & making good the same etc.

complete. For all Floor

Make-Cera Cat. No. S2040121, Parry wareC0434* (CTH), Jaquar SLS-

WHT - 6801, HindWare

ALL FLOORS 1.00 3276.63 EACH

31 Providing and fixing chromium plated, bottle trap with necessary

couplings of approved quality for wash basin. Make- Cera,

Parryware, Jaquar, HindWare

ALL FLOORS 1.00 1230.00 EACH

32 Providing & fixing C.P. Brass Waste Coupling for Washbasin or sink. (B)

ALL FLOORS 1.00 86.10 EACH

33 Prov.& Fixing Health Faucet ABS Body with wall Hook and

Meter chrome plated PVC Hose Pipe.

Make-Cera F8030106AB, Parry ware T9874A1, Jaquar ALD-587,

HindWare F160109

ALL FLOORS 1.00 1009.90 EACH

34 Providing & Fixing 15 mm Dia 2 way bib tap with wall Flange at all

floor levels, polished bright etc. comp.

Make- Cera F2013163, Parry ware G4834A1, HindWare Cat.

No.:F530004, Jaquar FLR-5041N

ALL FLOORS 1.00 1828.81 EACH

35 Providing & fixing 600 mm x 450 mm mirror of superior glass at all

floor levels, mounted on 6 mm. th. A.C. sheet or plywood sheet &

fixed to wooden plugs with C.P.brass screws and washers etc. For all

ALL FLOORS 1.00 859.41 EACH

36 Providing & Fixing 15 mm Dia bib tap with wall Flange at all floor

levels, polished bright etc. comp.

Make- Cera F2013151 BIB COCK, Parry ware G3104A1, HindWare F280002

BIB COCK, Jaquar FLR-5047 N BIB COCK

ALL FLOORS 2.00 1353.77 EACH

37 Providing flush cock consisting lever, cartridge sleeve & flange &

concealed part.

Make- Cera EXPOSED PART F2013751 & Concealed part F4060101, Parry ware

T9824A1&T9823A1, Jaquar FLR 5083 KN , CONCEALED BODY ALD-081,

HindWare F280052 & CONCEALED STOP COCK F850105

ALL FLOORS 1.00 2056.47 EACH

38 Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme /

Jain/ Astral/ Tulsi/Finolex make for water supply line at all floor

levels incl. fixtures like bends, tees, shoe etc joined with resin of

approved brand & manufacture etc. comp. Pipe shall be fixed on the

wall the help of clamp at every two meter C/C or shall be concealed

as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost

of all materials.

ALL FLOORS 25.00 166.00 Rmt.

ALL FLOORS 25.00 256.00 Rmt.

39 Providing & Fixing U-PVC pipe (SWR) confirming to IS no.

(Type "B") of Prince /Supreme /Jain/ Astral / Tulsi Finolex make for

soil and waste discharge system at all floor levels incl. All fixtures

like bends, tees, shoe etc. jointed with resin of approved brand &

manufacture etc. comp. (M.R.)

ALL FLOORS 20.00 412.00 Rmt.

(B) 110 mm. Dia.

ALL FLOORS 20.00 444.00 Rmt.

(C) 160 mm. Dia.

ALL FLOORS 20.00 731.00 Rmt.

40 Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

110x110 mm diameter with jali of the following nominal diameter of

self cleaning design with C.I. scread down or hinged grating

including the cost of cutting and making good the walls.

ALL FLOORS 2.00 586.27 Nos.

41 Labour Charges For Edge Finished For Granite. 234.00 43.43 Rmt.

42 Birla Putty: Apply two coats of putty and two coats of primer of approved

brand and manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other matter

and sand papered smooth.

43 Plastic Emulsion: Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall surface to give an

even shade including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth.

Total Amount (Excluding GST)

Total Amount (Excluding GST)

Signature of Contractor

Executive Engineer

Public Infrastructure Cell

Surat Municipal Corporation