Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.9 LAccepted-AOC | ₹21.9 L Quoted ₹22.2 L | L1 | Accepted-AOC Due to Lowest Rate |
| 2 | L2₹28.1 L+₹5.8 L (26.2%)Rejected-Finance | ₹28.1 L+₹5.8 L (26.2%) | L2 | Rejected-Finance Due to Highest Rate |
| 3 | L3₹29.7 L+₹7.4 L (33.4%)Rejected-Finance WARD NO 1 HIRA NAGAR HAMIRPUR HP | ₹29.7 L+₹7.4 L (33.4%) | L3 | Rejected-Finance Due to Highest Rate |
| 4 | L4₹31.0 L+₹8.8 L (39.5%)Rejected-Finance | ₹31.0 L+₹8.8 L (39.5%) | L4 | Rejected-Finance Due to Highest Rate |
| 5 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Others-ofline document not Received |
| Sl No | Description | Qty | Unit | Ajeev Kumar L1 | Rishav Katna L2 | Nishant Puri Govt Contractor L4 | Anirudh Katna L3 |
|---|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation trenches etc. in earth work in all kinds of soil such as pick work, jumper work blasting work soft /hard rock, chiesling soft /hard rock where blasting is prohibited, slushy, daldal and saturated soil l/c pumping or bailling out water with in all heights stacking the excavated soil with 15cm layer when required into plinth sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus earth as per direction of Engineer-in-Charge with in all leads and lifts. | 69 | Cum | 860 ₹59,340 | 700 ₹48,300 | 550 ₹37,950 Lowest | 800 ₹55,200 |
| 2.00 | Providing, Laying, jointing and testing of MSERW (plan ended pipe) with 100% circumfrential butt welded joints by electrical arc welding with minimum two layers capable to withstand required test pressure (minimum welding thickness shall be equal to pipe wall thickness) including manufacturing and fabrication of reducers/ tapers, all short pieces, bends of required degree as per site requirement made from parent tubes. dully welded in three layers (two for outer & one on inner side) and all other operation such as cutting, cleaning, welding, jointing, fabrication of bends, tees etc, lowering and laying in excavated trench to ensure required level i/c flushing, cleaning, and hydraulic testing complete in all respect including all leads and lifts as per the direction and to the entire satisfection of Engineer-In-Charge. 200 mm dia (Medium Class). | 400 | Rmts. | 4,350 ₹17,40,000 Lowest | 5,500 ₹22,00,000 | 6,200 ₹24,80,000 | 5,800 ₹23,20,000 |
| 3.00Providing and Supplying of double flanged Cast iron Sluice Valve of various dia Leader/Kirloskar make (with hand wheel) Class PN-1.6 as per IS Code-14846 latest upto date ammendments standard make with bols, nuts, rubber insertion etc. complete in all respect as per the direction and to the entire satisfication of Engineer-in-Charge within all leads and lifts. | |||||||
| 3.01 | 200mm dia | 2 | Nos. | 47,500 ₹95,000 Lowest | 50,000 ₹1,00,000 | 65,000 ₹1,30,000 | 55,000 ₹1,10,000 |
| 3.02 | 100mm dia | 1 | Nos. | 17,500 ₹17,500 Lowest | 30,000 ₹30,000 | 35,000 ₹35,000 | 40,000 ₹40,000 |
| 4.00Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in: | |||||||
| 4.01 | Foundation, footings basis of columns etc. and mass concrete complete in all respect including all leads and Lifts as per the direction and to be entire satisfaction of Engineer-In-Charge. | 84 | Sqm. | 340 ₹28,560 | 375 ₹31,500 | 250 ₹21,000 Lowest | 400 ₹33,600 |
| 4.02 | Vertical surfaces such as walls (only thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like complete in all respect as per direction and to the entire satisfaction of Engineer- in- charge within all leads and lifts. | 34.4 | Sqm. | 335 ₹11,524 Lowest | 400 ₹13,760 | 450 ₹15,480 | 400 ₹13,760 |
| 4.03 | Flat surfaces such as soffits of suspended floor, roofs, landing and the like complete in all respect as per direction and to the entire satisfaction of Engineer- in- charge within all leads and lifts. | 4 | Sqm | 525 ₹2,100 | 400 ₹1,600 Lowest | 550 ₹2,200 | 400 ₹1,600 Lowest |
| 4.04 | Edges of slab and breaks in floor and walls under 20cm wide complete in all respect as per direction and to the entire satisfaction of Engineer- in- charge within all leads and lifts. | 9.2 | Rmts. | 125 ₹1,150 Lowest | 200 ₹1,840 | 150 ₹1,380 | 400 ₹3,680 |
Tender Value
₹26.7 L
EMD Value
₹47,490
Closing Date
6 Jan 2026, 11:00 amClosed
Executive Engineer
Jal Shakti Division Kangra
Providing, Laying, jointing and testing of MSERW pipe 200 mm dia from chamber (Right bank of Baner Khad) at Tanda along with WTP, C/O Anchor Block and C/O Intake Chamber near Tanda
2025_HPIPH_124356_1
EE/JSDK/NIT/2025-6900-6949 dated-24-12-2025
Open Tender
Civil Works
Item Rate
90 days
Kangra
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,500
Executive Engineer
₹47,490
14 Jul 2026
24 Dec 2025
6 Jan 2026
24 Dec 2025
6 Jan 2026
24 Dec 2025
24 Dec 2025 - 6 Jan 2026
Excavation in foundation trenches etc. in earth work in all kinds of soil such as pick work, jumper work blasting work soft /hard rock, chiesling soft /hard rock where blasting is prohibited, slushy, daldal and saturated soil l/c pumping or bailling out water with in all heights stacking the excavated soil with 15cm layer when required into plinth sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus earth as per direction of Engineer-in-Charge with in all leads and lifts.
Providing, Laying, jointing and testing of MSERW (plan ended pipe) with 100% circumfrential butt welded joints by electrical arc welding with minimum two layers capable to withstand required test pressure (minimum welding thickness shall be equal to pipe wall thickness) including manufacturing and fabrication of reducers/ tapers, all short pieces, bends of required degree as per site requirement made from parent tubes. dully welded in three layers (two for outer & one on inner side) and all other operation such as cutting, cleaning, welding, jointing, fabrication of bends, tees etc, lowering and laying in excavated trench to ensure required level i/c flushing, cleaning, and hydraulic testing complete in all respect including all leads and lifts as per the direction and to the entire satisfection of Engineer-In-Charge. 200 mm dia (Medium Class).
Providing and Supplying of double flanged Cast iron Sluice Valve of various dia Leader/Kirloskar make (with hand wheel) Class PN-1.6 as per IS Code-14846 latest upto date ammendments standard make with bols, nuts, rubber insertion etc. complete in all respect as per the direction and to the entire satisfication of Engineer-in-Charge within all leads and lifts.
200mm dia
100mm dia
Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in:
Foundation, footings basis of columns etc. and mass concrete complete in all respect including all leads and Lifts as per the direction and to be entire satisfaction of Engineer-In-Charge.
Vertical surfaces such as walls (only thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like complete in all respect as per direction and to the entire satisfaction of Engineer- in- charge within all leads and lifts.
Flat surfaces such as soffits of suspended floor, roofs, landing and the like complete in all respect as per direction and to the entire satisfaction of Engineer- in- charge within all leads and lifts.
Edges of slab and breaks in floor and walls under 20cm wide complete in all respect as per direction and to the entire satisfaction of Engineer- in- charge within all leads and lifts.
Providing and Laying cement concrete 1:4:8 (1cement:4 sand:8 graded stone aggregate 40mm nominal size) and curring complete excluding cost of form work in foundation and plinth complete in all respect including all leads and Lifts as per the direction and satisfaction of Engineer-In-Charge.
Providing and Laying cement concrete 1:2:4 (1 Cement:2 Sand:4 graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:-
in foundation and plinth complete in all respect including all leads and Lifts as per the direction and satisfaction of Engineer-In-Charge.
In suspended floor roofs,landings, shelves and their supports balconies, beams girders bressumers and centilevers upto floor two level i/c carriage of materiala complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.
Providing and Laying cement concrete 1:1½:3 (1 Cement:1½ Sand:3 graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in :-
In foundation, footings, bases of columns etc and mass concrete complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.
In walls any thickness (but not less than 0.10mm thickness) including attached buttersses pillaster plinth and string courses etc. from top of foundation level upto floor two level complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge.
Providing and laying of mild steel/Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level (tor steel) complete in all respect with in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge.
Providing, Laying, jointing and testing and commissioning in trenches Galvanised mild steel tube of 100mm Dia ( light grade) including providing and fixing tube fitting such as reducer increaser, socket, union tees and bends etc where ever required and as per direction of Engineer in charge including entire carriage of material upto all leads and lifts.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.72 MB
Form6and8.pdf
Tender Documents • 0.71 MB
Termsandconditions.pdf
Tender Documents • 0.04 MB
BOQ_182711.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .