REPAIR/MAINTENANCE DG SETS, SWIMMING POOL FILTRATION PLANT, SEWAGE SUMP AND OTHER CONNECTED WORKS AT SECTOR A AND B UNDER GE (A) BARODA.

Amount

Labour only for taking out of non clogging type submersible sewage pump set 7.5 HP capacity with the help of chain pully block mechanism complete including dismantlling for replacement of following accessories including lowerning, reinstalling in same position after servicing, oiling, greasing and testing complete. Note : Chain pulley bolck shall be provided by contractor.The rate of parts will be paid as per relivent items.

M & L for replacement of rewinding of motor of 7.5 HP of non clogging type submersible sewage pump set with suitable gauge super enamelled copper winding wire duly coated with insulating varnish & using other insulating material including testing complete.

M & L rubber gasket for pump 7.5 HP.

M & L double seal bearing for 7.5 HP pump set , set of two as per sample.

M & L Mechanical seal complete with oil for 7.5 HP

M & L Oil seal for 7.5 HP pump set as per sample

Supply, install in repair and testing of starter for the pumpset having following company supplied technical specification and inclusive of following : - (a) Fully automatic star delta starter suitable upto 10 HP motor complete with voltmeter and ammeter.

M & L replacement of weather proof flexible copper conductor submersible cable of size 6 Sqmm as per suitable for 3-phase submersible sewage pump, PVC/Rubber un-sheathed, unarmoured suitable for submersible sewage pump complete.

M&L, for Rewinding of 3 phase squirrel cage back pull out induction motor after disconnecting motor from pump and dismantling the motor, taking down burnt winding wire of field coil and rewinding of field coil for suitable size of super enameled copper winding wire with necessary insulation materials including and necessary connection etc all as specified and directed of the following sizes:-

Supply and fix in repair of following parts for existing centrifugal pump set electric driven 3 phase 415 volt 40/25/15/10/7.5 HP having discharge. Note:(i) arrangement of Motor 7.5 HP-1 No back pull out stand by Centrifugal Pump/Monoblock with Motor as existing pump during the breakdown of any existing Monoblock/ Centrifugal Pump as per site including transportation, installation and taking out existing Centrifugal Pump and lowiring the stand by pump with necessory T&P items as required at site complete all as specified and directed.

Replacement of ball bearing of size as per sample given

Pump motor MS coupling (pump/motor for repair as per ser no 10.00)

Replacement of gland coller set complete

Cover bolts & washers, neck ring

CI impellar suitable for existing 7.5 HP centrifugal pump set.

CI Gland packing chaplla

SS Sleeve (Gland Sleeve)

Pump shaft with studs and nuts for pump body 7.5 HP

All as per item No.11 above but for 60 to 63 KVA DG Set

All as per item No.11 above but for 100 KVA DG Set

Supply only multi-grade 15W40 lubricating oil for DG Sets as per manufacturer’s recommendations, complete all as specified and directed.

Supply only coolant for radiator as per manufacturer’s recommendations, complete all as specified and directed.

Supply & fixing Water body,radiator system, with connecting accessories Hose pipe set , Clips of water / coolant cooled radiator system for following DG set:-

30 to 40 KVA DG set

60 to 82.5 KVA DG set

100 KVA DG set

Repairs & Overhauling of radiator assembly by dismantling from engine transporting to the workshop and removing the sediments and scales, corrosion etc by means of acid, cleaning and high pressure water washing and air cleaning, gas welding / soldering with good quality material for stopping the leakage etc, re-assembling the same with new gaskets and transporting to the site, fixing to the engine with hoses, clips complete to the entire satisfaction of engineer - in - charge as required for following DG Sets:-

30 to 40 KVA DG set

60 to 82.5 KVA DG set

100 KVA DG set

Dismantling the water pump of the DG Set taking out the worn out parts, refixing the water pump in the same position after replacing the worn out parts with new water pump repair kit set for following DG set:-

30 to 40 KVA DG set

60 to 82.5 KVA DG set

100 KVA DG set

Dismantling & strip opening of self starter for 12 volt/24 volt inspecting /checking the complete parts & taking out worn out parts/unserviceable parts and making the self starter functional after replacing the new parts as required and directed. Note: Spare parts shall be measured and paid for separately under respective items of BOQ.

Supply only the following items to self starter of existing make.

Armature assembly 12 volt suitable for 80 AH to 150 AH

Solenoid switch 12 volts

Field coil 12 volts

Bendex penion 12 volts complete

Carbon brush

Supply and fixing in repair of battery charging panel mounted 12 V 6 Amp complete all as directed.

Disconnection and dismantling the fuel injector pump assembly from its original position , Overhauling & servicing by cleaning / oiling/servicing of fuel injector pump assembly , removing and replacement with and including fuel injector pump, repair kit,fuel pipe and injectors including fip calibration & refixing the same complete all as directed by Engineer-in-charge for following DG set :-

30 to 40 KVA DG set

60 to 82.5 KVA DG set

100 KVA DG set

S&F in repair RPM meter of DG set complete all as specified and directed.

S&F in repair oil pressure Gauge on DG set complete all as specified and directed.

S&F in repair oil temperature Gauge on DG set complete all as specified and directed.

S&F in repair water temperature Gauge on DG set complete all as specified and directed.

S&F PVC insulated stranded copper conductor cable of 25 sqmm single core, of 2 Mtr length, souldered with 2 Nos gun metal battery terminals suitable for 60-180 Ah 12V/24V DC battery, complete all as specified and directed.

M&L for preparation of old painted surface of DG Set complete (DG Set cap 30 KVA to 40 KVA) with fuel tank by scrapping / removing old paint / dust etc and painting with two coats of synthetic enamel paint (colour & tint as approved) over a coat of primer including caliberatation of capacity and marking/writing as follows:- (a) Tank capacity (b) Tank cleaned on (c) Due date. (d) MES No in Black Bold Latter.

All as per srl item No 28 above but for DG Set cap 60 KVA to 62.5 KVA.

All as per srl item No 28 above but for DG Set cap 100 KVA.

Disconnecting, and taking out carefully unserviceable alternator, transformer and existing pattern AVR of any make and any capacity of DG Sets , dismantling and strip opening of alternator for servicing, taking out and removing old burnt out winding and rewinding of alternator with existing gauge super enameled copper wire as approved by the Engineer-in-Charge with insulating material such as luminous paper, latherized paper, cotton tape, glass sleeves, insulating varnish & alternators making new to shunt field coil,main poles, yoke, armature slot, armature,commutator,bushes, bearing ,shaft magnatic,pole shoe,boring,making new to cleaning slots / Decalying of slots if it get damaged etc, including reassembling and fixing the same in position and testing alternator assembly, complete all as specified and directed by the Engineer-in-Charge.

Taking out following defective parts from Alternator of DG sets and supply and fixing new parts in same position including testing, complete all as specified and directed by Engineer-in-Charge :-

AVR unit complete for 30 to 40 KVA DG Set

AVR unit complete for 60 to 62.5 KVA DG Set

AVR unit complete for 100 KVA DG Set

Terminal plate

Silicon Rectifier assembly with metallic plate as existing covered with thin layer of selenium and inverted nut bolt , control wiring soldering complete.

Flexible rubber coupling star type capacity alternator coupled for 30 to 100 KVA , complete all as specified and directed.

S&F in repair self starter 12 V for DG set 60 to 62.5KVA suitable for kirloskar, Ruston& CG complete all as specified and directed.

S&F in repair self starter 12 V for DG set 30 to 40 KVA suitable for Ruston,kirloskar & CG complete all as specified and directed.

S&F in repair self starter 12 V for DG set 62.5to 100 KVA suitable for Ruston,kirloskar & CG complete all as specified and directed.

S & F in repair flexible fuel pipe of 5 Mtr length including end hexa nut bolts etc, complete all as specified and directed.

S & F in repair ignition switch push button type, complete all as specified and directed.

S&F in repair lead acid battery maintenance free 12 Volt 92 to 95 Ah, complete all aspecified and directed Make: Exide/Amaron

All as per srl item No.38 above but 12 Volts 120 Ah, complete all as specified and directed. Make: Exide/Amaron

M&L for top overhauling of DG set 100 KVA Make : Cummins, KEC, Mahindra, Greaves and kirloskar with and including of taking down of the old unsv parts such as inlet and exhaust valve mechanism, valve guide sheet, tappets, cylinder liners, pressure ring, oil rings, piston, connecting rod and gagen pin including lathe work as required for top overhauling and fixing the unservicable parts in same position, complete all as specified and directed. Note :- Spare parts shall be measured and paid for separately under respective items of BOQ as supply only.

Supply only Sleeves liner, complete all as specified and directed.

Supply only Piston , complete all as specified and directed.

Supply only Piston oil ring, complete all as specified and directed.

Supply only Piston pressure ring, complete all as specified and directed.

Supply only Inlet valve mechanism, complete all as specified and directed.

Supply only Exhaust valve mechanism, complete all as specified and directed.

Supply only Connecting rod bearing , complete all as specified and directed.

Supply only Valve guide, complete all as specified and directed.

Supply only connecting rod bush, complete all as specified and directed.

Supply only Valve guide sheet, complete all as specified and directed.

Supply only FIP calibration, complete all as specified and directed.

Supply only Injectors, complete all as specified and directed.

Supply only Inlet and exhaust valve spring, complete all as specified and directed.

Supply only Head gasket set, complete all as specified and directed.

Supply only injector sleeves, complete all as specified and directed.

Supply only Connecting rod, with nuts ,seal packing, complete all as specified and directed.

Supply only oil cooler with all nuts and packing etc complete all as specified and directed

Supply only Oil pump with all accessories used in fixing complete all as specified and directed.

Supply only Feed pump with all accessories used in fixing complete all as specified and directed.

Supply only Binjo bolt with washer and packing etc, complete all as specified and directed.

Supply only Commpresor ring ,complete all as specified and directed.

Supply only Turbo Charger complete with all all accessories used in fixing complete all as specified and directed.

Supply only Exhaust jain with all accessories used in fixing etc complete all as specifed and directed.

Supply only Turbo Jain with all accessories used in fixing etc complete all as specfied and directed.

Head repair complete with leathe work including all boring work complete as per fixing again in engine complete all as specified and directed.

Supply only valve seal,complete all as specified and directed.

Supply only valve lock ,complete all as specified and directed.

Supply only Acuator with all accessories used in fixing ,complete all as specified and directed.

Supply only ECU with all accessories used in fixing, complete all as specified and directed.

Supply only Suppressor with all accessories used in fixing, complete all as specified and directed.

Supply only Governer with all accessories used in fixing, complete all as specified and directed.

Supply only NRV with complete accessories used in fixing, complete all as specified and directed.

Supply only MPU complete with all accessories used in fixing , complete all as specified and directed.

Supply only Stop Solenoied with all accessories used in fixing, complete all as specified and directed.

Supply only IPS sensor with all accessories used in fixing, complete all as specified and directed.

Supply only Oil sensor with meter and all accessories used in fixing, complete all as specified and directed.

Supply only Ignition switch with all accessories used in fixing, complete all as specified and directed.

M&L 30 to 62.5 KVA of Make Cummins, KEC, Mahindra, Greaves, Ashoka Layland and kirloskar with and including of taking down of the old unsv parts such as inlet and exhaust valve mechanism, valve guide sheet, tappets, cylinder liners, pressure ring, oil rings, piston connecting rod and gagen pin and lathe work as required including fixing all the necessary parts in postion, complete all as specified and directed. Note :- Spare parts shall be measured and paid for separately under respective items of BOQ as supply only.

Supply only Sleeves liner, complete all as specified and directed.

Supply only Piston, complete all as specified and directed.

Supply only Piston oil ring, complete all as specified and directed.

Supply only Piston pressure ring, complete all as specified and directed.

Supply only Inlet valve mechanism, complete all as specified and directed.

Supply only Exhaust valve mechanism, complete all as specified and directed.

Supply only Connecting rod bearing , complete all as specified and directed.

Supply only Valve guide, complete all as specified and directed.

Supply only connecting rod bush, complete all as specified and directed.

Supply only Valve guide sheet, complete all as specified and directed.

Supply only FIP calibration, complete all as specified and directed.

Supply only Injectors , complete all as specified and directed.

Supply only Inlet and exhaust valve spring, complete all as specified and directed.

Supply only Head gasket set, complete all as specified and directed.

Supply only Connecting rod, with nuts ,seal packing, complete all as specified and directed.

Supply only oil cooler with all nuts and packing etc complete all as specified and directed

Supply only Oil pump with all accessories used in fixing complete all as specified and directed.

Supply only Feed pump with all accessories used in fixing complete all as specified and directed.

Supply only Binjo bolt with washer and packing etc, complete all as specified and directed.

Supply only Compressor ring ,complete all as specified and directed.

Supply only Turbo Charger complete with all all accessories used in fixing complete all as specified and directed.

Supply only Exhaust jain with all accessories used in fixing etc complete all as specifed and directed.

Supply only Turbo Jain with all accessories used in fixing etc complete all as specfied and directed.

Head repair complete with leathe work including all work complete as per fixing again in engine complete all as specified and directed.

Supply only valve lock ,complete all as specified and directed.

Supply only Acuator with all accessories used in fixing ,complete all as specified and directed.

Supply only ECU with all accessories used in fixing, complete all as specified and directed.

Supply only Suppressor with all accessories used in fixing, complete all as specified and directed.

Supply only Governer with all accessories used in fixing, complete all as specified and directed.

Supply only NRV with complete accessories used in fixing, complete all as specified and directed.

Supply only MPU complete with all accessories used in fixing , complete all as specified and directed.

Supply only Stop Solenoied with all accessories used in fixing, complete all as specified and directed.

Supply only IPS sensor with all accessories used in fixing, complete all as specified and directed.

Supply only Oil sensor with meter and all accessories used in fixing, complete all as specified and directed.

Supply only Ignition switch with all accessories used in fixing, complete all as specified and directed.

Supply only injector sleeves, complete all as specified and directed.

S&F 3 pole AC control power contactor,415 volts, . Phase 50 hz rated operational current 63 amp. & AC 3 rating confirming to IEC-60947 in AMF Panel complete all as specified and directed.

S&F 3 pole AC control power contactor,415 volts, . Phase 50 hz rated operational current 95 amp. & AC 3 rating confirming to IEC-60947 in AMF Panel complete all as specified and directed.

S&F 3 pole AC control power contactor,415 volts, . Phase 50 hz rated operational current 160 amp. & AC 3 rating confirming to IEC-60947 in AMF Panel complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to using galvanised iron strip 25×4mm as earthing lead mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.

M& L for rewinding of monoblock pump motor set of 10 HP/7.5 HP of swimming pool with suitable gauge copper winding wire after taking out burnt winding wire varnishing. insulating mtrl etc complete all as specified as directed

Supply only TCCA 90 (Trichloroisocyanuric Acid) in containers.

Supply only Alumn

Supply only copper sulphate

Supply only Bleaching powder min 25 % contained Chlorine

S&F nylon brush for suction sweeper as per sample as directed by Engr in Charge

S & F of on load changer switch in sheet steel enclosure four pole, 415volt, front handle operated of capacity 200 Amp complete, change over switch fixed in panels or on walls as per site requirement including taking down old UNSV change over switch any make and type all as specified and directed.

S & F of on load changer switch in sheet steel enclosure four pole, 415volt, front handle operated of capacity 163 Amp complete, change over switch fixed in panels or on walls as per site requirement including taking down old UNSV change over switch any make and type all as specified and directed.

S & F of on load changer switch in sheet steel enclosure four pole, 415volt, front handle operated of capacity 63 Amp complete, change over switch fixed in panels or on walls as per site requirement including taking down old UNSV change over switch any make and type all as specified and directed.

M & L for caulking of lead joint of spigot and socket cast iron pipe incl providing lead wool and making joint leak proof including necessay earth work/excavation and making good disturbed site, T & P and draining out water etc of following as directed.

150 mm bore

100 mm bore

S & F Green suction hose pipe medium duty ISI marked of size 80 mm inner dia with wall thickness not less than 5.0 mm suitable for working pressure 8.0 Kg/ Sq cm & bursting pressure 15.0 Kg/ Sq cm complete.

Supply and fix in repair MCCB 4 Pole,415 Volts adjustable type, 200 Amp with breaking capacity 35/36KA, complete all as specified and directed by Engr-in-charge.

Supply and fix in repair MCCB 4 Pole,415 Volts adjustable type, 125 Amp with breaking capacity 16 to36 KA, complete all as specified and directed by Engr-in-charge.

Supply,laying testing and commissioning XLPE insulated,armoured heavy duty electric cable with aluminium conductor,1100 volts grade,cross sectional area 50 x3.5 core, complete all as specified and directed by Engr-in-charge.

Supply,laying testing and commissioning XLPE insulated,armoured heavy duty electric cable with aluminium conductor,1100 volts grade,cross sectional area 35 x3.5 core, complete all as specified and directed by Engr-in-charge.

Supplying and fixing in repair of 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart, one twin core cable flat of size 10.0 sqmm for service connections complete all as specified.

M&L for DG Machanic, and Helper and M&L for sweage pump and filtration plant for swiming pool ,for attending day to day compliants of all nature i.e. No DG Start, leakaging form pump,filters etc leakage coolent pressure check,AVR unit check, chocking of air,fuel filter,nrv,fuel pipe, fuel return pipe,checking of DG connection, changeover connection,and all other minor/major fault including Holiday and sunday complete all as directed by Engineer - in - Charge. Note: (a) Any material required for complaints shall be measured & paid separately under respectvie items here-in-after) (b) In case , after checking & attending the defect, it is not possible to rectify the defect within 05 hrs, the facts shall be brought to the notice of Engineer-in-charge by the contractor/his rep. If Cocern JE is satisfied with contractors works view, no recovery will be made.(C) All T&P required for attending the Complaints shall be provided by the contractor. (d) Technician DG Machanic and Labour shall always be in possession of his suitable equipments incl all tools, complete etc ,as required at site.

100 mm bore

Material and labour for painting of water supply tubing upto 150 mm after preparation of old painted surface by proper cleaning and then applying two coat of synthetic enamelled paint by spray machine as per existing colour code as directed by Engineer-in-Charge

Material and labour for painting of Water Filtration tank of capacity 10000 ltrs incl pump alongwith motor upto 10 HP capacity after prepation of old painted surface by proper cleaning and then applying two coat of synthetic enamelled paint spray machine as per existing colour code or marking MES No on it as directed by Engineer-in-Charge

S&F in repair fully automatic Single phase preventor with suitable relay and suitable for 7.5 to 30 HP Centrifugal pump connected with, 415 volt, 50 HZ AC supply all as specified and directed by Engr-In-Charge.

labour only for cleaning of DG set and swimming pool area and water connection pipe line from Pump house area by proper cleaning like grass cutting by grass booster machine removing all garbage from site complete all as specified and directed by Engineer-in-Charge.

Supply, installation, fixing, jointing and testing, ISI Marked, of approved quality, cast iron sluice valve of class PN-1.6 conforming to IS-14846 of 2000 both ends flanged with iron wheel head and stainless steel spindle, long body type, jointed and tested including taking down old one complete all as specified and directed for following bores :- (a) 80mm bore

Supply, installation, fixing, jointing and testing, ISI Marked, of approved quality, Butterfly valve conforming to IS-14846 of 2000 both ends flanged with hard plastic handal head and,long body type, jointed with neck washer and tested including taking down old one complete all as specified and directed for following bores :- (a) 80mm bore

Supply, installation, fixing, jointing and testing, ISI Marked, of approved quality, Butterfly valve conforming to IS-14846 of 2000 both ends flanged with hard plastic handal head and,long body type, jointed neck washer and tested including taking down old one complete all as specified and directed for following bores :- (a) 100 mm bore

M&L For construction of shed size 5.2 Metre(width)x 5.1 metre(length)x 3.20 metre(Height) for DG set of pre-painted galvatume aluminium zinc coating GI based corragated steel .50mm thick with steel work tubler truss using EWR IS 1161,1979 grade ST 240 complete channel with Preparation and priming with one coat of red oxide and two coat of synthetic enamel surface of any description over 10 cm in width or grith including earth work (post hole) or similar holes with pcc 1:3:6 C2 40 mm graded crushed stone aggregate protection, complete all as specified and directed.

Supply Only Tape insulation PVC LT 20 mm wide x 25 mtrs long complete all specified.

M/s super construction (BID ID -3478979)