SPL REPAIRS TO STORAGE ACCN BLDG NO T-89 AND JCOs MESS (T-256 AND T-257) OF CERTAIN UNIT AT N AREA UNDER GE CHANDIGARH

Amount

Dismantling of asbestos cement (corrugated, semi corrugated, translucent etc.) sheets/ridge in roof coverings complete all as specified and directed.

Demolition cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

S&F Steel tubular section of any size and shape including special shaped washer fixing in any position etc.complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 complete all as specified.

S&F pre painted galvalume aluminium zink coating GI basedcorrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and washers as specified and directed.

S&F pre painted galvalume aluminium zink coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge, valley gutter, fixed with self tapping screws and washers all as specified and directed and including dismantling plain or corrugated steel sheeting, any gauge, thickness in roof coverings all as specified and directed.

Dismantling ceiling and wall boards or insulation board any thickness including cover fillets complete all as specified and directed

M&L for 9 mm thick PVC pre liminated gypsum board as in ceiling including anodised aluminium snap grid frame work for ceiling having grid size 605 x 605 mm comprising of wall angle of size 25 mm x 25 mm x1.30 mm, main runner of size 38 mm x 26 mm x1.30 mm. The grid system will be suspended at every 1200 mm c/c in both directions by using 3.5 mm dia aqualine wire fixed to purline or RCC roof with suitable fastners to withstand the lood of grid system with ceiling board complete all as specified and directed.

Taking down chowkhats or frame not exceeding 1.5 Sq. m each with shutter(s) (without taking off shutters from the frame), including removing to store, complete all as specified.

Taking down chowkhats or frame exceeding 1.5 Sq. m but not exceeding 4 Sq. m each with shutter(s) (without taking off shutters from the frame), including removing to store, complete all as specified.

Taking down shutters of any description exc 1sqm but not exceeding 2 Sq. m each, including stacking at directed location for refixing and/or removing to store, complete all as specified.

S&F for factory made pressed steel frames, conforming to IS, having profile 105 mm x 60 mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified.

S&F for factory made pressed steel frames, conforming to IS, having profile 125 mm x 60 mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified.

M&L for 35mm thick 2nd class hard wood plain, framed, panelled door shutter (two panels) with lock rail and panels of 12 mm thick plywood BWR 9 ply with commercial veneers on both faces with size of rails and stiles sizes of members of shutters as specified in SSR Part-I,Section 8.Clause 8.24(a) and fitted to Chowkats all as spd and as directed.

M&L 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with divided in to square with plain,chamfered or rounded,mitered and rebated sash bars any numbers), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (b); supplied and fitted to chowkats all as spd and as directed.

S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete without glazing bars , dovetailed or welded as per drawing No TD-276R sheet 1/4 to 4/4 of HQ CE CZ Chandigarh including one shop coat of red oxide/zinc chrome primer, including Cutting holes into or through brick walls in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:3 type B-1 complete all as specified.

S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete with glazing bars , dovetailed or welded as per Drg No TD-277R sheet 1/4 to 4/4 of HQ CE CZ Chandigarh including one shop coat of red oxide/ zinc chrome primer, including cutting holes into or through brick walls in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:3 type B-1 complete all as specified.

S&F for factory made steel windows (Box type), fixed type, dovetailed or welded etc., including one shop coat of red oxide zinc chrome primer, fixed as IN REPAIR including Cutting holes into or through brick walls in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:3 type B-1 complete all as specified.

S&F in repairs for 18/19 mm thick HDHMR board both side liminated and fixed with screws in cup board shutters/ shelves and kitchen cabinets all as specified & directed.

S&F in repair 30 mm Continuous (piano) hinges, brass, bright finish or electrogalvanised complete all as specified and directed

S&F mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe-290 Gde- E-165 all as specified and as directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening, complete all as specified.

M&L Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thicks with wood free EPS, with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing inframe at site as per specification& drawing.

S&F Stainless steel butt hinges medium weight 100mm size all as per specified and directed.

S&F helical door spring MS 300mm long ordinary rat tail pattern spring including roller & roller plate complete fixed to wooden/steel chowkats all as spd and as directed.

S&F 150 mm long extruded section aluminium alloy anodised handles fabricated type all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm long all as specified and directed.

Supply and fix aluminium alloy anodised sliding door bolt 300mm long with hasp & sample (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as directed.

M&L for floor door stopper of aluminium alloy body and tongue,anodised,with 140mm long cover plate and hard drawn steel spring ,fixed in door complete all as directed.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed with tinned tack or stainless wire stapples all as specified.

S&F in repair Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed with tinned tack or stainless wire stapples all as specified.

S&F in repair Stainless steel curtain rod of dia not less than 25 to 30mm of Gde-I quality with fixing brackets, stops and rollers etc as approved by GE complete all as specified.

S&F in repair stainless steel Knob of Gde-I quality suitable of 25 to 30mm dia for curtain rod complete as approved by GE complete all as specified.

S&F for plain Sheet glass 4 mm thick, ordinary quality and glazing with oil pane putty in squares not exceeding 0.5 Sq. mm in each pane complete all as specified.

S&F for Figured glass, 4 mm thick, pin head type and glazing with oil putty in squares not exceeding 0.5 sq. m in each pane, complete all as specified.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified.

M&L Brick work using old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6) complete all as specified.

M&L Brick work using old size bricks (EXCEPT BRICKS) straight or curved on plan exceeding 6.00 metre mean radius, built in cement mortar (1:6) complete all as specified.

M&L for Brickwork with sub class 'B' bricks,straight or curved on plan to any radius in half brick thick walls in cement mortar 1:4 complete all as specified..

Demolition of reinforced cement concrete any thickness complete all as specified.

M&L Reinforced cement concrete, type A-1 (1:1½:3), using 20 mm graded stone aggregates as in slabs supported on walls, beams and columns in floors, chajja, drilling, weilding in old steel, roofs, landings, balconies, canopies, deck slabs and in shelves etc complete all as specified.

Use & waste of form work for rough finished surface to soffit of suspended slabs such as roof slabs, floor slabs, landing, chajja and similar work n.exc 200mm thick (horizontal or sloping) complete all as specified and directed.

M&L for RCC (nominal mix) 1:2:4 (using 20mm graded aggregated ) as in beams, cantilever and lintels over 1.5 m span etc or similar items all as specified & directed.

Use & waste of form work for rough finished surface to side & soffit of beams, bressmers, cantilevers,and supports etc complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends, or edges of landings etc. and cutting chases for concealed water tubing, concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth, in brick walls, complete all as specified.

Mild steel TMT bars10 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Mild steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

M&L for Repairing the edges of concrete chajjas, facias, columns & the like by providing PCC (1:2:4) type B-0 including all necessary form work and/ or provision of rendering 15mm thick (average thickness) in cement mortar (1:3) with chiken wire mesh, after applying a coat of cement slurry @ 3kg/sqm of surface finished even and fair, surface area not exceeding 1.00 Mtr wide, in patches including two coat of apex over a coat of primer including taking down swoolen/damaged plaster or concrete complete all as specified and as directed.

Supply only water proofing compound, complete all as specified.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.led in any mortar all as specified and directed.

M&L Machine cut Kota stone slab flooring 18-20 mm thick, laid over & including 20 mm thick (average thickness) cement mortar (1:4) screed and jointed with grey cement slurry mixed with matching shade pigment including rubbing and polishing (Granite finish) complete all as specified.

M&L Kota stone slab 18-20mm thick on vertical surfaces like riser of steps, skirting, dado and pillar laid over & including 10 mm thick (average thickness) cement mortar (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (Granite finish), complete all as specified.

M&L for kota/terrazzo tiles (old) of any description for grinding, polishing and waxing (whereever needed) as per instructions of Engr-in-charge.

M&L Machine cut Granite (of any type) tiles 16-18mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone in cooking platfrom, window cill, step &riser etc. including grinding and polishing complete (cut to size in square shape) laid over & including 20 mm thick (average thickness) cement mortar (1:3) screed and jointed with grey cement slurry mixed with matching shade pigment including rounding of / moulding to edge (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified.

Dismantling floor hearth or wall tilling including cement mortar bedding, removing rubbish off the premises for minor repairs to floor in patches all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surface 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match . The tiles shall be laid in pattern with two or more colured tile including rendering 10 mm thick on brickwork or concrete surfaces finished even and fair in CM 1:4.combinations all as directed.

M&L for Non skid, Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exc 0.18sqm laid as in floors/skirting, set and jointed with cement slurry over & including 15 mm thick bedding layer of cement sand mortar (1:6) and pointed with coloured cement to match with surfaces of tiles as directed by Engr-In-charge.

M&L for vitrified Ceramic tiles 8 to 9 mm thick (square/ rectagular) polished,area of each tiles not exceeding 0.36 sqm , in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tile over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 as specified and directed.

S&F endora tile good grip series 300X300X8-10mm thick consinehas of colour set in neet cement slury on 15mm thick screed bed in CM 1:6 and pointed with pigment complet all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thick (below or above GL) complete all as specified and as directed.

M&L 75 mm thick, cement concrete type C-2, 1:3:6 using 20 mm graded stone aggregate, finished even & smooth without using extra cement, as in plinth protection, complete all as specified.

M&L for PCC 1:2:4 Type B-2 (Using 20 mm graded stone aggregates) as in surface channels & drains complete all as specified.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and as directed.

M&L cement concrete type B-2 1:2:4 (20mm graded aggregate) 100mm thick in flooring finished even and smooth without using extra cement including Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and as directed.

M&L for providing cement concrete type D2, 1:4:8 using 40 mm graded stone aggregate, as in mass concrete etc., complete all as specified and aa directed

Material & labour for 25mm thick PCC (1:2:4) type BO (using 12.5 mm graded stone aggregate), as in leveling concrete in floor finished even & rough surface complete all as specified & directed.

M&L for 75 mm thick Cement concrete type D- 2,1:4:8 (40mm graded aggregate) as in floor complete all as specified and directed.

M&L Chequered cement concrete tiles 30cmx30cmx25cm thick with gre cement and pigment, over 15 mm thick screed in CM 1:6 set jointed and pointed in neat cement slurry in floors complete all as specified and directed.

M&L for machine pressed precast concrete interlocking colour paver block 80 mm thick any shape and size with glossy finish on top confirming to IS 15658-2006 of 80mm thickness, with grey cement & pigment M-40 grade complete all as specified and as directed.

M&L 50mm thick sand cushion under interlocking paver blocks including watering and consolidation, complete all as specified and as directed.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on other than fair faces of brick work or concrete surfacses, finished the surface fair & even w/o using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished the surface fair & even w/o using extra cement all as specified.

M&L for applying two coats of weather coat extrior paint over and including one coat of primer coats of damp shealth to new plastered wall as per manufacture isstrcution including properly filling the cracks with putty and apllied by approved applicator complete all as specified.

M&L for applying two coats of oil bound distemper over and including 1mm thick wall putty and a coat of alkali resistant priming paint incl preparation of new plastered surfaces of wall complete all as specified and directed.

M&L two coat of synthetic enamel paint over old painted wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including preparation of surfaces complete all as specified.

M&L two coats of synthetic enamel paint over & including a coat of pink primer over new wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including preparation of surfaces complete all as specified.

M&L two coats of synthetic enamel paint over & including a coat of red oxide primer over new steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces

M&L two coats of synthetic enamel paint over & including a coat of red oxide primer over old steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces

M&L for applying two coat of oil bound distemper over a coat of primer and 1mm wall care putty including complete removal of existing surface complete all as specified and directed.

M&L for complet removel of exit treatment applying two coats of weather coat exterior paint over one coat of primer coats of damp shealth to old plastered wall as per manufacture instrcution including properly filling the cracks with wall care putty and apllied by approved applicator complete all as specified.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified.

Taking up or down steel tubing 20 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified all as specified.

All as per item No 83 above but 25 mm dia.

S&F 20mm dia CPVC Brass Elbow complete all as specified all as specified.

S&F 25mm dia CPVC Brass Elbow complete all as specified all as specified.

S&F 20mm dia CPVC Brass Tee complete all as specified all as specified.

S&F 25mm dia CPVC Brass Tee complete all as specified all as specified.

S&F 20mm dia CPVC Male Brass Threaded Adaptor (MTA/ MBTA) ) complete all as specified all as specified.

S&F 25mm dia CPVC Male Brass Threaded Adaptor (MTA/ MBTA) ) complete all as specified all as specified.

S&F 20mm dia CPVC Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified all as specified.

S&F 25mm dia CPVC Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified all as specified.

S&F 25mm dia CPVC brass Tank Adaptor complete all as specified all as specified.

S&F 25mm dia CPVC brass Union complete all as specified all as specified.

S&F 25mm PP-R Gate valves (brass insert) as per requirement of the site in repair, complete all as specified.

S&F 20mm PP-R Gate valves (brass insert) as per requirement of the site in repair, complete all as specified.

S&F Bib taps, cast copper alloy with handle, chromium plated fancy type, short body with wall flange screwed down, suitable for 15 mm bore pipe, IN REPAIR complete all as specified.

S&F Bib taps, cast copper alloy with handle, chromium plated fancy type, long body with wall flange screwed down, suitable for 15 mm bore pipe, IN REPAIR complete all as specified.

S&F Consealed stop valve, cast copper alloy, screwed down, high pressure with handle, chromium plated, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIR. complete all as specified.

S&F in repairs soap dish of size 160x160x90mm ,fixed with plugs with chromium plated brass screws (for Baths of 3 cubical in each toilets) complete all as specified.

S&F for stop valves/angle valve, fancy type, chromium plated 15mm cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair complete all as specified.

S&F Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) in repair complete all as specified.

S&F for Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, screwed for iron pipe and fixed suitable for 15 mm bore pipe, IN REPAIR, complete all as specified.

S&F Waste coupling of PTMT, for WHB any colour half or full threaded suitable for 32 mm size discharge pipe (Minimum weight 45 gm) IN REPAIR, complete all as specified.

S&F PVC waste pipe 800 mm long suitable for 32 mm dia waste coupling, IN REPAIR, complete all as specified.

S&F Swivel shower of CP with shower arm 15mm size,195 mm long with bend of 45 degree with flange of PTMTany colour for fixing with 15mm pipe (Minimum weight 40 gm) IN REPAIR, complete all as specified.

S&F PVC connections 15 mm size with PTMT nuts of length 600 mm IN REPAIR, complete all as specified.

S&F Cast iron 'P' or 'S' trap, ISI marked, suitable for 100 mm bore CI spun pipes IN REPAIR, complete all as specified.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore, including jointing to waste pipe set in cement concrete type B-1(1:2:4) of size 200 mm x 200 mm x 250 mm, IN REPAIR, complete all as specified.

S&F in repair CP brass Wall mixer system with L bend incl (provn for Over Head shower) , 15mm bore chromium plated fancy type complete all as specified.

M&L for Aluminum body peg set of 06 pegs as in repair complete all as specified and as directed

S&F corner glass shelf assembly 5.5 mm thick toughened glass 300x300mm wide bevelled edge/ hatching of edges fixed with stainless steel "D" brackets with railing omplete all as specified and directed.

S&F as in repair stainless steel Grating 127mm (5'') size complete all as specified and as directed.

S&F vitreous china wash down water closet (pedestal pattern) white with ‘ and including PVC P’ or ‘S’ trap, plastic seat cover white and connection to out going pipe & to flushing pipe, anti-syphonage pipe etc as in repair complete all as specified and as directed.

S & F in repair Vitreous china squatting pan 'orrisa' pattern size 580 x 440 mm white integral floor rests ( excluding flushing cistern ) including connection to trap and to flushing pipe anti syphonage pipe etc complete including making good to floor, complete all as specified and as directed.

S&F 10 ltr capacity PVC flushing cistern syphonic action type white dual flush ISI (IS 7231) marked with flush pipe in repair complete with all fixing arrangements complete all as specified and directed.

S&F Vitreous China wash basin with pedestal, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts, IN REPAIR, complete all as specified and directed.

S&F kitchen sinks of stainless steel 1mm thick with drainage board with plugs,washers and wastes couplig ;including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm X 460mm and bowl size 410mm X 330mm X 160mm complete all as specified.

S&F in repair CP Brass Sink mixer, with swivel spout (Wall Mounted ) 15mm bore dia pipe for mixing hot & cold water screwed down for iron pipe and fixed with connecting legs and wall flanges complete all as specified and directed.

S&F in repair plate rack of stainless steel of size 900x750x300 mm with steel shelves and hanging arrangements for utensil complete all as specified and directed.

S&F in repair 15 mm bore 2 way Bib tap, brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc all as specified and directed.

S&F in repair health faucet , brass chromium plated with 1m long flexible PVC tube and wall hook all as specified and as directed.

S&F in repair spray jet chromium plated including suitable lengthof PVC connection pipe ,complete all as specified and as directed.

Dismantling of mild steel work of any description and in any position all as specified and directed.

Taking down eaves gutter pipes, rain water pipes (of any size or pattern) including fittings, head shoes, bends, swan neck etc

S&F for 110mm dia PVC (SWR) pipe pressure rating, ISI Marked fixed to wall/floor set in cement mortar with and including MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc complete all as specified and directed.

S&F for 75mm dia PVC (SWR) pipe pressure rating, ISI Marked fixed to wall/floor set in cement mortar with and including MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc complete all as specified and directed.

Supply and fixing PVC bends plain (any radius) for 75mm bore PVC pipes complete all as specified and directed.

Supply and fixing PVC bends plain (any radius) for 110mm bore PVC pipes complete all as specified and directed.

S&F in repairs 75mm dia PVC (SWR) floor traps plain with grating including jointing with solvent cement all as specified and directed

S&F brass, chromium plated toilet paper holder fixed to wall with chromium plated brass screws etc complete all as specified and directed.

Dismantling of water tank of capacity exc. 500 & n.exc. 1000 ltrs and removing to store complete all as specified.

S&F Hoisted and fixed in position, 1000 litre capacity, polyethylene water storage tanks of any shape, including making necessary connections complete all as specified.

S&F Ball valves, high pressure PTMT with epoxy coated polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed and suitable for 20 mm bore GI pipe, IN REPAIR, complete all as specified.

S&F tank nipple suitable for HDPE for water storage tank of size 20 mm bore in repair complete all as specified.

Disconnecting existing tanks exc 500 ltr and n exc 1000 ltr, setting aside (or lowering if required) for repairs,cleaning etc and hoisting if required. Reconnecting and re-fixing in position, complete all as specified.

M&L providing cement concrete type B0 1:2:4 (12.5mm graded aggregate) cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones,bed plates,back filling in steel door frame etc,complete all as specified and directed.

S&F Tubular towel rod 600 mm , brass chromium plated, fixed to walls with plugs and chromium plated brass screws all as specified and as directed.

M&L wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc., and surface painting, with a layer of blown grade bitumen of any penetration applied hot @ 1.7 kg per sq.m, blinded with grit or pea size gravel @ 0.006 cu.m per sq.m, and lightly tampered (area of flashings, etc., shall be added to the roof area) complete all as directed by the Engineer-in-charge.

Brushing neat cement slurry with 3.0 kg of cement per sq.m, complete all as specified and directed.

Cutting of tree branches / tree roots from wall and felling of tree girth n. exc 30 cm, repairing dismantled portion of wall with cement mortar 1:4 / concrete 1:3:6 & making good with existing surfaces and removing the tree/ branches out side of the defence land and cleaning site all as directed by Engineer-in-charge.

M&L for rendering 10mm thick in cm 1 : 3 mixed with liquid water proofing compound as per manufacturers instructions on concrete/brick surfaces finished even and smooth without using extra cement complete all as directed (WPC measured and paid separately) including taking down cement plaster complete all as specified and as directed.

Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m over cleaned and dry roof surface including parapet etc complete all as specified.

Material and labour for providing and laying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. notless than 150 gms/sqm) land on primed surface by forced application . The APP membrane shall be laid using torch-on application with minimum 10 cm side overlap and 15 cm end overlap. The APP memberane shall be fixed with termination bar and fasteners and end shall be properly sealed with sealant. The rain water gutter portion shall be finished with cement mortar 1:4 to provide requisite slope towards rain water pipe outlet.

Taking down Copper / aluminium point wiring ( light, fan, socket, or power ) complete, incl fixture and fitting such as switches, ceiling roses, pendants, regulators sockets, light fittings etc. removing materials to store for keeping in safe custody or for making credit and making good disturbed surfaces of walls, floors etc. complete all as specified.

M&L Point wiring with 1.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable in and including concealed , non metalic rigid pvc medium grade ISI marked conduit not less than 19 mm with all fittings & other accessories and also including PVC insulated ISI marked unseathed FRLS cable of size 1.5 sq mm copper conductor as earth wire to common earth dolly including concealed in wall/ceiling, modular MS Box, 1.6mm thick with modular cover plate with frame as required at site suitable for modular switches, sockets, fan regulator etc for the one light point/ceiling fan/exhaust fan/ bell point controlled by one way switch 6 amps 240 volts Note:-1. Colour code of wiring should be (for phase -Red, Neutral-black & earth wire green) 2. Modular switch sockets fan regulators shall be meaured and paid separately uner respective items. 3. Cost of mudular MS box , codular cover plate an frame of any modules as required at site and as directed by Engineer-in-charge is deemed to be included in th quoted rates.

All as per item no 147 above but one 3 pin 6 Amps switch socket out let point on independent board

All as per item no 147 above but one 3 pin 6 Amps switch socket out let point on same board

All as per item no 147 above but wiring with 4 sqmm copper conductor for 15 Amp socket outlet point on independent.

S&F ceiling rose surface bakelite 65x50mm three terminals complete all as specified ISI marked.

Supply and replacement of socket mudular 3 pin 5 Amp and 3 pin 15 Amps flush type (ISI marked), complete all as specified.

Supply and replacement of switch mudular 15 Amps single pole, AC, 230V flush type ISI marked.

Supply and replacement of socket mudular 5 pin 5 Amp flush type (ISI marked), complete all as specified.

Supply and replacement of switch mudular 5 Amps single pole, AC, 230V flush type ISI marked.

S&F bell push 5 Amp flush type ISI marked.

M & L for Sub main wiring with two single core FRLS 6 sqmm and one single core 4.00 sqmm as earth continuity cable PVC insulated multi-stranded copper conductor drawn through M&L for FR PVC conduit and inclduding connection at both ends with copper lugs. Colour code for Phase - Red/ Yellow/ Blue, Neutral - Black and Earth - Green complete all as specified.

S&F as in repair batten for LED tube light 1X20 watts LED, 230Volt energy saving recess, industrial batton type, powder coated, CRC Sheet complete with all as accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by Engineer in Charge.

Supply and Fixing lamp holder, angular type,(With lamp 9 watts ) PVC/ polycarbonate with back plate of capacity 5 Amps 230 volts suitabel for general lighting system complete all as specified and as directed.

M&L bell electrical ding dong 5 Amp 230 volt complete all as specified.

Supply & fixing factory made sheet metal enclosure for distribution board double door type (Fixed to the wall), single pole and netural with 200 Amp rated bus bar, 8 way suitable for having MCB’s complete all as specified.

S&F MCB Isolator of rating 240 volts, SPN, 40 Amps incl taking down complete all as specified.

S&F in repair MCB, SP, 240V, 5 to 32 Amps incl taking down complete all as specified.

M&L for earthing complete with galvanized steel earth plate, electrode 60cm x 60cm x 6.0mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI wire 4mm dia as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel, connected to earthing test point, earth plate electrode surrounded by mixer of common salt and charcoal dust, including 20mm dia GI watering pipe ‘medium grade’, funnel with wire mesh, earthing chamber with cement concrete (1:2:4) type B-1, RCC chamber cover 80mm thick (1: 1 ½ : 3) type B1, excavation & earth work all as shown in electrical plate No 3 of SSR (Part-I) and testing on completion, complete all as specified and directed.

S&F street light bracket made out of 40/32mm dia, 1.50 mtr long GI tubing, "medium grade" ISI marked, bent to required shape and angle as per site requirement with and including MS clamps size 30X6mm, with nuts, bolts, washers etc for fixing street light fittings and bracket, duly painted with two coats of aluminium paint over a coat of red oxide primer including taking out existing unserviceable rusted GI bracket complete all as specified and as directed.

S&F Supply and fixing LED street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermalmnagement in multiple optics complete with IP 65/66 protection complete.

S&F mirror light sleek LED mirror light provided with high output diffuser with suitable capacity driver with all comptonants as per manufacturer with 3 core flexible cord from ceiling rose to connector of fitting etc complete all as specified and directed .

Supply and fix Exhaust fan of size 300 mm sweep (5 star BEE rating) 900 RPM, single phase, 230 volts heavy duty with louvers, shutter including three core flexible cable of required length of size 23/0.0076 from ceiling rose/connector to fan terminal, fixing the fan with suitable sixe of nut, bolt washer and making good the disturbed surfaces as per existing complete all as specified and directed.

M&L for dismantling of ceiling fan scrapping old paint and applying two coat of synthetic anticorrosive enamel paint over a coat of anti-corrosive zinc red oxide and including M&L for replacement of rubber bush, nut, bolts, washers and split pin complete and including replacement of down rod of 1.5 mtr long and 3 core copper flexible PVC insulated cable size 23/0.0076 from ceiling rose to fan motor complete all as specified and as directed by Engr - in -Charge

S&F MCB DB, TPN, 12 way with 200 Amps rated copper bus bar with mild steel sheet enclosure, vertical, double door type suitable for fixing MCBs including connecting etc. complete all as specified and as directed by Engr - in -Charge.

S&F MCB TPN 32 Amps 10 KA ISI marked complete all as specified and as directed by Engr - in -Charge.

Supply and lay cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty ) 1100 volts grade with stranded aluminium conductor of size 70 Sqmm 3.5 core complete all as specified and as directed by Engr - in -Charge.

Excavation in trenches in soft/loose soil not exceeding 1.50 meter wide and not exceeding 1.5 meter in depth and not exceeding 10sqmm on plan and getting out complete all as specified.

Returning,filling in including spreding, levelling, watering and well ramming in layers not exceeding 25 cm thick each excavated soil in trenches after the pipes have been laid and tested completed as in soft/loose soil, complete all as specified.

Removing of surplus soil/excavated material to a distance not exceeding 50meter and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified.

Sand cushioning with clean dry sand to cables with layer of sand 8cm before of cable and 15cm thick after laying of cable complete all as specified Note: For payment purposed punned thickness of 18cm shall be measured against spread thickness of 23 cm as mentioned in para 19.75 of SSR Part i

Supply and laying burntbricks sub class "B" old size for cable protection laid flat lengthsise perpenducualr to the axis of cable complete all as specified and direted by Engineer-in-Charge.

Supply and replacement of fan mudular regulator 100W complete all as specified and direted by Engineer-in-Charge.

S&F LED Recess mounting downlight 2x2 ft decorative type of 15 W WHITE light and connecting with three core PVC copper flexible cable of size 23/.0076 from ceiling rose to connector block complete all as specified and as directed by Engr - in -Charge

M/S MATLOOB AHMED (BID ID -3154808)