Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹16.1 Cr
EMD Value
₹16.1 L
Closing Date
3 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Superintending Engineer, Project Implementation Unit, Health & Family Welfare Department.
Construction of 80 Bedded C.H.C. Building, P.M. Room and Compound Wall at village Liliya, Ta. Liliya, Dist. Amreli.
363582
2026-27/110/01
Open
Civil Works
Works
Gandhinagar
1 document required · 1 mandatory
₹18,000
PIU-General Fund A/c 11-114
₹16.1 L
5 Nov 2026
5 Nov 2026
5 Nov 2026
3 Dec 2026
5 Nov 2026
120 days
Name of Work :- New Construction of 80 Bedded CHC at Lilya, District-Amreli.
Memorandum showing items of works to be carried out
may Be More Or In Figures
Clearing and grubbing road land including uprooting rank vegetation grass bushes,shrubs,sapling and trees girth up to 300 Eighty Four Thousand Two
0.08 mm removal of stumps of trees cut earlier and disposal of unserviceable materials(A) By manual means in area of light jungle. 84255.99 Hundred Fifty Five Rupees Hectare
And Paise Ninety Nine Only
Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the One Hundred Twenty Two
2366.36 excavated stuff upto 50 Meter lead.(B) Loose or Soft 122.94 Rupees And Paise Ninety
Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing One Hundred Fifty Seven
399.00 off the excavated stuff upto 50 Meter lead.(B) Dense or Hard soil. 157.16 Rupees And Paise Sixteen Cumt.
Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing
One Hundred Thirty Six
634.00 off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil
Rupees And Paise Thirty Only
Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing
One Hundred Seventy
485.14 off the excavated stuff upto 50 Meter lead.(B) Dense or Hard soil
Rupees And Paise Fifty Only
Filling available excavated earth (excluding rock)in trenches, plinth,sides of foundations etc. in layers not exceeding 20 cm. in One Hundred Thirty Six
1919.00 depth consolidation each deposited layer by ramming and watering. 136.92 Rupees And Paise Ninety Two
Filling in plinth with chhara under floors including watering, ramming, consolidating and dressing etc. completed Six Hundred Twenty One
150.65 621.46 Rupees And Paise Forty Six
Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete
Four Hundred Eighty One
Rupees And Paise Eighty Only
Filling in foundation and plinth with murrum or selected soil in layers of 20cm thickness including watering ramming and
Three Hundred One Rupees
639.00 consolidating etc. complete
And Paise Seventy Eight Only
Applying general insecticide pest control treatment to floors, cupboards etc including labour material etc. complete. Using
Heptachloride 20 EC. As Per 6113_pests Consentration Weight 0.50 percent is recommended one litre chemical emulsion Thirty Nine Rupees And
dillute with 39 liter of water will give. Total dillute concrentration will be 40 litre inclusive of one litre chemical emulsion Paise Nine Only
appication 0.5 Litre chemical / Sqm of surface is recommended as per I.S
Carring out plinth treatment to post construction / existing structure by spraying chemical solution for termite control
treatment including labour and material consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC. As Per
Fifty Nine Rupees And Paise
552.00 6131_paret-II Consentration Weight one percent is recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 %
concrentration inclusive of one litre chemical emulsion appication at the rate of 5 Litre chemical / Sqm of surface is
recommended as per I.S.
Providing and spreading rubble soling in 20 TO 23 cm Thick layers including hand packing and compacting,royalty charges
One Thousand Ninety Four
125.00 Etc completed
Rupees And Paise Eleven Only
Provdg. & laying cement concrete 1:2:4 (1cement:2 corse sand :4 hand broken stone aggregate 20 mm nominal size) and Three Thousand Eight
294.76 curing complete including cost of form work in (A) Foundation and plinth 3805.29 Hundred Five Rupees And
Paise Twenty Nine Only
Providing and laying controlled cement concreteM-30 and curing complete Including the cost of formwork and Excluding
Six Thousand Twelve Rupees
663.73 Cost of reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete. (more
And Paise Fifty Three Only
than 10 ton) (Design Mix )
may Be More Or In Figures
Providing and laying controlled cement concreteM-25 and curing complete eIncluding the cost of formwork and Excluding
Six Thousand One Hundred
Cost of reinforcement for reinforced concrete work in (C) All Floor Beam. (more than 10 ton)
924.54 6161.18 Sixty One Rupees And Paise
Providing, laying controlled cement concreteM-30 and curing complete including the cost of form work but excluding
Seven Thousand Six
reinforcement for reinforced concrete work in: Up to Terrace Floor Level.(C) Column
714.51 7630.73 Hundred Thirty Rupees And
Paise Seventy Three Only
Providing, laying controlled cement concrete M-25 and curing complete including the cost of form work but excluding Six Thousand Eighty Eight
62.00 reinforcement for reinforced concrete work.(B) Coping 6088.46 Rupees And Paise Forty Six
Design Mix (All Floor) Only
Providing and laying controlled cement concrete M-25 and curing complete including the cost of form work but excluding Six Thousand Eighty Eight
67.30 reinforcement for reinforced concrete work in: (B) Lintel (i) All Floorr 6088.46 Rupees And Paise Forty Six
Design Mix Only
Providing and laying controlled cement concrete M-25 and curing complete including the cost of form work but excluding
Six Thousand One Hundred
reinforcement for reinforced concrete work in: (C) Whether shade (i) All Floor
49.00 6138.96 Thirty Eight Rupees And
Paise Ninety Six Only
Providing and laying controlled cement concreteM-25 and curing complete including the cost of form work but excluding Seven Thousand Five
905.70 reinforcement for reinforced concrete work in: (D) R.C.C. slab (i) All Floor 7570.13 Hundred Seventy Rupees And
Design Mix Paise Thirteen Only
Providing and laying controlled cement concreteM-25 and curing complete including the cost of form work but excluding
Five Thousand Six Hundred
reinforcement for reinforced concrete work in: (E) Stair case (i) All Floor
96.90 5628.91 Twenty Eight Rupees And
Paise Ninety One Only
Providing, laying controlled cement concreteM-25 and curing complete including the cost of form work but excluding Six Thousand Eight Hundred
97.08 reinforcement for reinforced concrete work in: RCC wall up to Terrace Floor 6866.16 Sixty Six Rupees And Paise
Design Mix Sixteen Only
Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including bending, binding and placing in position complete Seventy Eight Rupees And
upto floor two level . upto any floor any height Paise Thirty Four Only
Masonary work using Aerated light weight concrete block having crushing strength not less than 35 kg/sqcm for super
Four Thousand Six Hundred
structure above plinth level upto floor two level in cement mortar 1:5 ( 1 cement : 5 fine sand ) complete as per Technical
1005.00 4639.81 Thirty Nine Rupees And Paise
Eighty One Only
Masonary work using Aerated light weight concrete block having crushing strength not less than 35 kg/sqcm for super
structure above plinth level upto floor two level in cement mortar 1:5 ( 1 cement : 5 fine sand ) complete as per Technical Four Thousand Six Hundred
530.20 Specification 4639.81 Thirty Nine Rupees And Paise
Half Block Wall Eighty One Only
Providing 15 mm. thick mala cement plaster in single coat on fair side of brick concrete walls for interior plastering upto floor One Hundred Ninety Five
12507.80 two level and finished even & smooth plaster.(ii) Cement mortar 1:4 (1 cement : 4 sand) 195.94 Rupees And Paise Ninety
(i) All Floor Four Only
Providing 10 mm thick mala cement plaster on ceiling and soffits of stairs upto floor two level, in cement mortar (1:3) (1 One Hundred Seventy One
4505.12 cement : 3sand) 171.71 Rupees And Paise Seventy
(i) All Floor One Only
20 mm thick sand faced cement plaster (Gutaka) on walls up to height 10 meters above ground level consisting of 12 mm thick Three Hundred Sixty Nine
3257.20 backing coat of CM 1:3 (1 cement : 3 sand) and 8 mm thick finishing coat of CM 1:1 (1 cement : 1 sand) etc. complete. All Floor 369.64 Rupees And Paise Sixty Four
Providing throating or plaster drip and moulding to R.C.C. chhajja Forty Three Rupees And
Paise Five Only
may Be More Or In Figures
Providing & Fixing the Chikenmesh - 20 guage(Crimp Jali) of approved size applying between the RCC and masonry junction Two Hundred Ninety Seven
2291.00 in proper line, level and plumb with all material, labour, tools, tackles and equipment. Including providing and fixing the jali 297.95 Rupees And Paise Ninety Five
with nails, etc complete as directed by the site-in-charge. Only
Applying two coats of Birla or Asian acrylic lapy ( putty) & two coats of primer of approved brand and manufacture on new wall
Forty Rupees And Paise Fifty
16637.00 surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter
and sand papered smooth.
Providing and applying Wall painting (three coats) with plastic emulsion paint of approved brand and manufacture on under
Eighty Two Rupees And
11039.00 coated wall surface to give and even shade including throughly brushing the surface free from mortor droppings and other
Paise Eighty Five Only
foreign matter and sand paperd smooth on new work to give an even shade.for all height
Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade
One Hundred Twenty Rupees
2497.00 after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete
And Paise Twenty Six Only
Providing 20 mm thick water proof cement plaster using water proofing powder 1Kg/1bag of cement for all floors on brick /
concrete wall work using water proofing materials in C M 1: 4 ( 1 cement 4 coasrse sand) including finishing with a flooting
Two Hundred Eighty Rupees
250.00 coat of neat cement slurry etc complete for all floor. and shall be guaranteed for minimum period of 10 years after handing
And Paise Seventy Eight Only
over the completed building by the main contractor to be finished as directed. Stamp paper guarantee 10 years to be furnished
before receiving any payment from the client.
Providing and laying 18 mm thick polished granite stone machine cut in single piece (Max. available) in sill and jambs of Door,
Two Thousand Four
window, Ventilation frame laid over 10 mm thick cement mortar 1 : 3 (1 cement : 3 coarse sand) and jointed with grey cement
766.00 2474.50 Hundred Seventy Four
slurry with matching pigment incl. rubbing and polishing half rounding edge etc. complete colour and shed as approved by
Rupees And Paise Fifty Only
architect engineer in charge.
Providing and laying 24" X 24" full body Double Charge Vitrified glossy/ satin/ matte finish 8mm thick tile flooring including
One Thousand Two Hundred
skirting/dado over 20mm (ave) base of C.M. 1:6 on new surfac or fixing on existing flooring by adhesive material incl.
1862.00 1264.41 Sixty Four Rupees And Paise
dismentaling of existing flooring and jointed with colour cement-slurry incl. finished with flush pointing & cleaning the surface
etc. comp. for light shed.
Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-
One Thousand Nineteen
coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment
1444.00 1019.39 Rupees And Paise Thirty Nine
to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick
Providing and laying Ceramic flooring tiles 300mm x 300mm in flooring treads of steps and landings laid on a Bed of 12 mm.
Nine Hundred Ninety Two
252.00 Thick cement mortar 1:3 (1 cement : 3 coarse sand) pointing in white ceand jointed with white cement slurry.
Rupees And Paise Fifteen Only
Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting,
One Thousand Four
risers of steps and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement slurry.
4344.80 1488.24 Hundred Eighty Eight Rupees
And Paise Twenty Three Only
Providing and fixing Exterior grade paver tile pavement in approved pattern or Nitco or Pavit make or equivalent make in
approved colour and pattern as per architectural drawing. The tiles to be laid using 20 to 25mm thick CM 1:3. The bedding
plaster may vary in thickness as per site condition. The paver tiles to be pasted on the bedding plaster using grey cement.
The tiles to be pasted leaving grooves of 4 to 5mm in between each successive tiles or/and gap may be provided in between the
Nine Hundred Fifty Nine
275.00 paver tiles to have gross joints / pebble stone as per architectural scheme. No extra will be paid for leaving the joints. The
Rupees And Paise Fifty Only
joints to be pointed using ready-made polymer jointsealer like tile mate of Roff or laticrete or equivalent. The type of pointing
shall be ruled and sunk. The rate toinclude cost of all labour and material, cleaning, curing, etc., complete all as directed by
Engineer-in-Charge.
Providing and laying Tactile flooring tiles 300mm x 300mm in flooring 12 mm. Thick cement mortar 1:3 (1 cement : 3 coarse Eight Hundred Eight Rupees
sand) pointing in white ceand jointed with white cement slurry. Only
Providing and laying polished Granite slab flooring over 20 mm (average) base of cement mortar 1:6 (1 cement : 6 coarse sand)
One Thousand Nine
laid and jointed with grey cement slurry including rubbing and polishing complete.18 mm thick
275.00 1994.55 Hundred Ninety Four Rupees
And Paise Fifty Five Only
may Be More Or In Figures
Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 95mm x 24mm x
1.17mm (of Jindal Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track member size 92mm x 31.75mm x 1.30mm (of
Jindal Section no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm (of Jindal Section no:8933,@
Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size 40 mmx18mm x1.29mm (of Jindal Section no:8947@ wt.of
0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt/ with 5 mm
Two Thousand Eighty
220.00 thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon
Rupees And Paise Sixty Only
sealant glass fixing to frame as per details etc. Providing and fixing Stainless steel mosqito net jali ,wire of I.S gauge
designation 85-G with wire of 0.56 mm fix in aluminium door, window, ventilator shutters of any size, any shape with etc all
complete at all floors/all levels/all heights as per the architectural drawings and the directions of Engineer-in-Charge. Actual
laying installed Jali shall be measured.
Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm(of Jindal Section no:4605, @
One Thousand Three
Wt 1.094Kg / RMT with colour anodized alluminium frame with 5 mm thick transparent bronze colour tinted float glass with
15.00 1301.82 Hundred One Rupees And
colour anodized alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for.window
Paise Eighty Two Only
Providing and fixing M.S. grill of required pattern of windows etc. with M.S.. flats at required spacing and frame alround
square or round headed bolts and nuts or by screws.including applying a priming coat of red lead paint and two coats of oil
One Hundred Six Rupees
6748.00 painting etc complete (A)Plain grill
And Paise Twenty Three Only
Providing and fixing flush door both sides laminated shutter fabricated from 35 mm thick solid core malemine faced three
layered pre laminated flat pressed wood based exterior grade bonded BWP/BWR synthetic resin having stamped IS
Four Thousand Six Hundred
grade I type II including three coats of lacquer polishing to exposed wooden surfaces and including providing and fixing of
93.00 4642.97 Forty Two Rupees And Paise
Floor door stopper & fixing of S.S finish decorative type heavy guage designs fixtures / fastening etc. complete As per drawings
Ninety Seven Only
and design supplied by architect and instruction given by authority and E.I.C.
may Be More Or In Figures
Providing & fixing in position alluminium pivoted Single Shutter door & partition with alluminium anodized hollow section
frame of approved shade fabricated from alluminium standard section for outer frame size 101 mm x 44.5 mm (of app.
wt. 1.30 kg/RMT) and door styles and top rial of alluminium section size 47.5mm x 44.5 mm (of app. wt. 1.14 kg/RMT)
Three Thousand Eight
bottom rail & lock rail for door size 114mm x 44.5mm (of app. wt. 1.7kg/RMT) and providing rubber gasket and glazing clips
192.00 3840.02 Hundred Forty Rupees And
around the glass all over including providing heavy handle, heavy lock, bracket, stoppers. 5 mm thick sheet ground glass
(frosted or obscured on one side in Top panel) fixed with transparent silicon gasket & 12 mm thick particle board fixed clits
including all required materials labours and equipments as per detailed drawing as directed.
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required
size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/
rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of
Three Thousand Nine
kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus
92.00 3958.59 Hundred Fifty Eight Rupees
of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,
And Paise Fifty Nine Only
water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body
threaded star headed counter sunk S.S screws, all as per direction of Engineer-In Charge. 35 MM
Providing and laying white glazed tiles equal size pieces for CHINA MOSAIC WATER PROOFING TREATMENT WITH BRICK
BET BASE to terrace including cleaning the surface opening the creaks in " V " grooves pattened filling the same water proof
cement mortar 1:1(1 Cement : 1 sand ) including BRICK BAT as directed to have proper slope over a layer of C.M. 1:1 (1
Cement : 1 sand) including finishing the top surface with 15mm thick water proof cement plaster in C.M. (1:3) (1 Cement :
Eight Hundred Sixty One
sand) and finishing with a floating coat of neat cement slurry using chemical water proofing compound as per manufactures
1974.93 861.53 Rupees And Paise Fifty Three
specifications and standard specifications as per indian Water proofing or equivalent including curing at specified period as
directed including finishing the top surface with equal size white glazed tiles pieces including round shape vata 100mm x
100mm size with filling white cement in joints, using chemical water proofing as per mfg., specification & standards with
cleaning top surface using acid including drip moulding at the junction of vata & plaster etc..complete as directed by E.I.C.
Fabricating, supplying and fixing in position SS railing for staircase and balcony with brush finish and 304 grade as per
Two Thousand Fifty Seven
Indian Standrd and detailed drawing including grinding, cleaning and filling the welded spots with SS finish (Only Length will
91.00 2057.37 Rupees And Paise Thirty
be paid for payment heigth max.1.0 mt.). The Work to be executed as per consultant drawing .
Fabricating, supplying and fixing in position SS daso for staircase and balcony with brush finish and 304 grade as per Indian One Thousand Three
37.00 Standrd and detailed drawing including grinding, cleaning and filling the welded spots with SS finish (Only Length will be paid 1313.00 Hundred Thirteen Rupees
for payment ). The Work to be executed as per consultant drawing . Only
Providing and filling with good quality Cinder (steam coal) as directed by engineer in charge in sunks in layers of 15 cm thk, Seven Hundred Ninety Five
168.00 including watering, placing, ramming well etc. as directed. 795.88 Rupees And Paise Eighty
Providing and fixing Sand which type Granite platform including supplying and fixing granite stone 18 mm thick mirror
Three Thousand Three
polished 1st quality Granite stones in top and side posiition and vertical strip at front over 25 mm thick polished kotah stone
Hundred Ninety Seven
22.00 platform fixing in top and sides and itermediates supports fixing with cement mortar and adhesivee and finishing including
Rupees And Paise Sixty Four
cutting for fixing of sink any size (as directed by engineer incharge) at required position etc complete.
Providing and fixing Flexible Homogeneous Vinyl Flooring of With treatment of Plyurethane Reinforced Surface, Densely One Thousand Eight
Compacted, Anti-Bactaril and fungicidal and Antistatic havng thickness of 2.00mm With weight of 3150 g/m2 with levelling, Hundred Ninety Three
chemical adhasive for fixing, corner junction. Rupees And Paise Seventy
Wall Painting (two coats) with antibacterial polyrethane epoxy paint approved brand and manufacture on internal walls to give
Four Hundred Fifty Four
360.00 an even and smooth surface. Thoroughly brushing the surface free from mortar dropings and other forein matter and sand 454.50 SMT.
Rupees And Paise Fifty Only
prepared smooth.
may Be More Or In Figures
Providing & applying two Componant ,non slumping ,non-sagging, thixotropic epoxy bedding compond & adhesive compatible
Five Hundred Seventy Five
with for tiles for coving at radius of 25 mm or as directed by the architect's / Engineer-in-charge make it fit for tiles inclusive
1200.00 575.70 Rupees And Paise Seventy
of Labour, material and Equipment etc. for all heights, location, shape & size as directed by the architect/Bank engineer
incharge. (Actual Length shall be measured for payment.)
Providing and applying 2mm thick Texture Plaster Terre Palette (Earthen Textures, Spectrum, Coral or equivalent)
Three Hundred Fifty One
incorporating fine filaments made of polymer and aggregating natural stone powder with making grooves on existing base coat
2497.00 351.48 Rupees And Paise Forty Eight
of 18 mm thick smooth mala plaster etc. Complete Colour and shade as approved by Architect/ Engineer in charge for all floor
Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint, brushing, interior to give
Ninety Two Rupees And
356.00 an even shade including cleaning the surface an even shade including cleanicn the surface of all dirt, dust and other foreign 92.20 SMT.
Paise Twenty Only
Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge & 15 mm Thick Densified
edges on the Tile Periphery for Extra Strength The Light weight calcium silicate ceiling tiles shall have , light reflection 85%
noncombustible as per B.S. 476 part IV, 100% humidity resistanceandalsohaving thermalconductivity0.043° w/m KC.for the
best thermal Insulation . The Light weight calcium Silicate tile shall be of approved texture Fine fissured/ Spintone/Cosmos
having NRC value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to be laid on true
One Thousand Six Hundred
horizontal level suspended inter locking metal gridof hot dipped galvanized steel sections (galvanizing @120 grams per sqm
690.00 1674.15 Seventy Four Rupees And
including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and size of 24X38mm made
Paise Fifteen Only
from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size 24X28mm made out of 0.33mm
(Minimum) sheet spaced 1200mm along spaced between main ‘T’ at 600mm centre to centre to form agrid of 1200X600mm
and secondary cross ’T’ of length 600mm and size 24x28mm made of 0.30 mm thick (Minimum) sheet to be interlocked at
middle of the 1200X600mm panel to form grid of size
FLUSH PARTITION (laminate finish) :
Providing & fixing flush partition up to false ceiling ht (thickness of partition is 75 mm) having 12 mm thick Marin plywood
IS 710 both side on aluminum framing. Aluminum framing size for vertical & horizontal support is 50 mm x 25 mm. All
exposed surfaces finished with 1 mm thick laminate of approved shade without any air gap and grooving as per design.
Necessary framing to be erected above false ceiling. No extra cost to be paid for the same. Before installation, make hole/face Two Thousand Six Hundred
113.00 plate for conduit pipes of electrical / networking cables with open able stud from partition Including all materials and labor 2639.14 Thirty Nine Rupees And Paise
etc. Make necessary grooves as per shown in drawing. All bottom ends are covered with Ghana teak bidding Patti finished Fourteen Only
with laminate Complete with all necessary hardware & adhesives as per details given in drawing and as per instructions of
Architect/consultant/Engineer In charge. Contractor has to provide all necessary cut outs (race ways.) for Electrical works &
no extra payment shall be made for it.
Partly glazed partition: Providing & fixing full height partly laminated & partly glazed partition (up to false ceiling ht )
using 12 mm thick marin plywood IS 710 both side on aluminum framing of guage 16 . Aluminum framing size for vertical
& horizontal support is 50 mm x 25 mm .Grid of aluminum framing is 600 mm x 600 mm. All exposed surfaces finished with
1 mm thick laminate of approved shade without any air gap and grooving as per design. . Necessary framing to be erected
above false ceiling (up to beam and slab height.) No extra cost to be paid for the same. Before installation, make hole/face One Thousand Four
95.00 plate for conduit pipes of electrical / networking cables with open able stud from partition Including all materials and labour 1467.53 Hundred Sixty Seven Rupees
etc. And Paise Fifty Three Only
For glazing Using of 12 mm thick toughen clear glass with proper crystal edges & with suggested frosted films on glass.
Frosted film material rate is provided extra as per given cost in tender item. All joints are covered with Ghana teak bidding
Patti finished with laminate. Complete with all necessary hardware & adhesives as per details given in drawing and as per
instruction of Architect/consultant/Engineer In charge.
may Be More Or In Figures
STORAGE BELOW PANTRY COUNTER :Providing & fixing full ht storage having size as per detail drawing , having depth of
600 mm, having skirting of 75 mm, with proper locks. 5 nos of vertical supports & 3 no of horizontal shelves made by 19 mm
thick Marin ply, having shutters of 9 mm thick double sandwich ply with using 12 mm thick Marin ply for framing. All Four Thousand Two
complete with proper Burma teak biding. Back ply is 12 mm Marin ply. All exposed & internal surfaces are covered with 1 mm Hundred Ninety Three
thick laminate. External & internal joints covered with bidding Patti complete with laminate finish. All complete with proper Rupees And Paise Thirty Nine
hardware like locks, S.S. Screws, MS Nails, Magnets, table chains, cable manager SS 304 Handles of 250 mm and 100 mm Only
dia etc. All Details as per shown in detail drawings & as per instructions of architect/consultant / in charge engineer
Drilling of bore hole in Alluvial Strata by Direct Rotary rig.(i) 250 / 300 mm dia bore hole Eight Hundred Sixty Five
400.00 865.57 Rupees And Paise Fifty Seven RMT.
Providing and supplying ISI mark M.S. E.R.W. pipes with following diameter confirming to IS : 4270 - 1992 including all taxes,
insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, Two Thousand Four
50.00 stacking etc. complete. 2431.07 Hundred Thirty One Rupees RMT.
Medium Duty Plain Ended And Paise Seven Only
Providing and supplying following materials for borewellClamps made from M.S. plate with 3 holes on either side with nuts & Two Thousand Thirty Seven
1.00 bots of standard make and suitable size. 2037.91 Rupees And Paise Ninety One
(g) 900 mm X100 mm X 16 mm flat suitable to 200 mm dia. Pipe. Only
Lead Lined Doors:Providing and fixing Lead Lined Door of Navair make, comprising of Hardwood Frames, interlayered with
specified thickness of lead sheet and shutter comprising with approved material as per manufacturer specification, the whole
system shall be in accordance to AERB norms. The lead sheet Overlaps in frame & edge to edge lead lining in shutters must
be considered as approved by EIC.Door Frame: The Door Frames shall be hardwood red merandi Frame, The Frame Shall be
fully lead lined of 2 MM lead Sheet with 99% purity and as defined by AERB. Frames should be fixed by anchor fasteners for
installation on a finished plastered masonry wall opening. The size of frame shall be min. 120 X 70 mm or as per approved
manufacturer standard, with layered specified thickness of Lead Line Sheets (in door type) being overlapped from either side,
the finish of frame etc. shall be as per direction of Engineer in Charge. Frame rebate shall be as per manufacturer standard, Twenty Two Thousand Five
14.40 the finish of the door frame shall be wooden primer finish as per EIC. The door frame shall be fixed with anchor fastener / 22520.18 Hundred Twenty Rupees And
dash fasteners or as per manufacturer and as approved by EIC. Shutter: Door leaf shall be 44 mm thick with commercial ply Paise Eighteen Only
& laminate both side with or without vision lite.incase vision lite is required it shall be only Lead Glass as recomomnded by
AERB/DRC . The internal construction of the door should be rigid with lead line of 2mm thick all across the inside of the
exposed surface. Shutter shall be made with 6mm commercial borad and 35mm commercial board sandwitch between 2mm
lead sheet. All doors should be factory prepped for receiving appropriate hardware and provided with necessary reinforcement
for hinges, locks, and door closers as per ANSI Standard , the shutter shall be finished with approved 1mm thick laminate
Hardware: The hardware shall be fire rated hardware in accordance with requirement of doors and as specified in the door
type in the BOQ. The necessary reinforcement to be taken care if required while placement of hardware. All the hardware shall
Providing and fixing in position collapsible steel shutters with vertical channels 20 x 10 x 2 mm braced with flat iron diagonals
20 x 5 mm size with top & bottom rails of T iron 40 x 40 x 6 mm with 38 mm dia steel pulleys complete with bolts, nuts, Six Thousand Sixty One
locking arrangements, stoppers handles including applying a priming coat with red lead paint & Two Coat of oil paint etc. Rupees And Paise Forty Only
Construction of granular sub-base 150 mm thick by providing coarse graded machine crushed B.T. material satisfying MOST
specification of grading I (B.T. stone aggregate 53 mm to 26.5 mm 35 % , 26.5 to 4.75 mm - 45 % and 2.36 mm below - 20 % Nine Hundred Fifty Seven
336.00 )including spreading in uniform layer with motor grader on prepared surface, mixing by mix in place method with rotavator at 957.48 Rupees And Paise Forty Eight Cumt.
OMC and compacting with vibratory roller to achieve the desired density etc. complete. Only
may Be More Or In Figures
Providing M-250 controlled cement concrete road using Trimix vaccum dewatering system with mixing Conplast P-211 (water
reduction concrete admixture) @ 100 ML per bag of cement with mixing of Recon 3S fibers (reliance product) at 125 gms per
bag of cement with providing and fixing & removing of "C" channel having 75 x 75 mm as per required level slope and Six Thousand Two Hundred
224.00 thickness of concrete and leveling and finishing the concrete using surface vibrator, power floater and trowel light brooming on 6208.47 Eight Rupees And Paise Forty Cumt.
as directed including making expansion joint of size 20 x 200 mm & filling the expansion joint using Colpar 200 as per Seven Only
manufactures specitions by cutting of joint using concrete cutter machine etc. complete.
Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm
Four Hundred Two Rupees
596.00 thick of M250 grade concret as per approved design and including excavation for fixing in proper line and level,filling the joint
And Paise Fifty Five Only
with C:M 1:3 (1cement:3fine sand) etc complete. (upto 10 ton)
Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less than 35Kg. Nine Hundred Fifty Eight
3.00 958.17 Rupees And Paise Seventeen
Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 1.2mm , @ Wt. 0.643 Kg/mt
One Thousand One Hundred
with colour Powder Coated alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for
1.00 1175.56 Seventy Five Rupees And Sqmt.
Paise Fifty Six Only
Providing and fixing 1.20 Metre high fencing with 2.0 Metre long M.S. Angle posts 40mm x 40 mm x6 mm and oil painting
Three Hundred Ninety One
coats fixed at 2.5 Mt,C/c. with five Horizontan lines and two diagonals of galvanised steel barbed wire weighting 9.38 Kg. per
31.70 391.93 Rupees And Paise Ninety
100 Metre, strained and fixed to posts with G.I,staples including fixing the postsin ground with 0.5 M x 0.5.M x 0.5 M. block in
C.C1:5:10 etc complete.
Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths inter-locked together through their
Three Thousand Eight
entire length and jointed together at the ends by end locks mounted on specially designed pipe shaft with bracket plates,
42.00 3812.43 Hundred Twelve Rupees And
guide channels and arragements for inside and outside locking with push-pull operation including the cost of hood cover and
Paise Forty Three Only
spring etc. complete.(A) Shutters having width below 3.5 M.
Providing, supplying, fabricating & erecting chain link fencing panel of size 2100 X 1500 mm. made from 65 X 65 x 6 mm
angle (Angles will be supplied by PGVCL) including fixing the 10 Gauge 3 inch chainlink in angle frame by means of 40 X 5 One Thousand Eighty Five
6.34 mm. M.S. Flat welded to angle frame drilling to holes in angle frame & flat & fixing the same with angle post in line level & 1085.75 Rupees And Paise Seventy
plumb by means of 10mm. dia. bolts frame & flat & nuts, 2 coats of oil painting to angle iron etc., completed as per drawing & Five Only
as directed by E.I.C.
Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as
approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be Seventy Two Rupees And
concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive Paise Sixty Five Only
solvent, including cost of all materials.
Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as
approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be Ninety One Rupees And
concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive Paise Eighty Four Only
solvent, including cost of all materials.
Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as
approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be One Hundred Nineteen
concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive Rupees And Paise Fifteen Only
solvent, including cost of all materials.
Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as
approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be One Hundred Forty Eight
concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive Rupees And Paise Twelve Only
solvent, including cost of all materials.
Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as
One Hundred Ninety Five
approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be
144.00 195.67 Rupees And Paise Sixty Seven
concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive
solvent, including cost of all materials.
may Be More Or In Figures
Providing laying and jointing in true line and level 65mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as
approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be Six Hundred Seventy Rupees
concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive And Paise Sixty Four Only
solvent, including cost of all materials.
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation
Two Hundred Eight Rupees
25.00 Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the
And Paise Eighty Only
wall, ceiling and floor etc. complete. [B]20mm.
Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL VALVE / OR WHEEL valves of approved make,
Nine Hundred Nine Rupees
15.00 including flanges / unions, nuts, bolts, washers, etc. complete, as approved by the Architect and Engineer-in-charge for water
supply lines of the following Nominal bore (NB) size: 15 mm
Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL VALVE / OR WHEEL valves of approved make, One Thousand Eight
23.00 including flanges / unions, nuts, bolts, washers, etc. complete, as approved by the Architect and Engineer-in-charge for water 1818.00 Hundred Eighteen Rupees
supply lines of the following Nominal bore (NB) size: 25 mm Only
Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL VALVE / OR WHEEL valves of approved make,
Two Thousand Seven
including flanges / unions, nuts, bolts, washers, etc. complete, as approved by the Architect and Engineer-in-charge for water
4.00 2777.50 Hundred Seventy Seven
supply lines of the following Nominal bore (NB) size: 32 mm
Rupees And Paise Fifty Only
Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL VALVE / OR WHEEL valves of approved make,
Three Thousand Five
including flanges / unions, nuts, bolts, washers, etc. complete, as approved by the Architect and Engineer-in-charge for water
16.00 3595.60 Hundred Ninety Five Rupees
supply lines of the following Nominal bore (NB) size: 40 mm
And Paise Sixty Only
Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL VALVE / OR WHEEL valves of approved make,
Four Thousand Eight
including flanges / unions, nuts, bolts, washers, etc. complete, as approved by the Architect and Engineer-in-charge for water
15.00 4898.50 Hundred Ninety Eight Rupees
supply lines of the following Nominal bore (NB) size: 50 mm
And Paise Fifty Only
Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL VALVE / OR WHEEL valves of approved make, Six Thousand Five Hundred
4.00 including flanges / unions, nuts, bolts, washers, etc. complete, as approved by the Architect and Engineer-in-charge for water 6560.96 Sixty Rupees And Paise
supply lines of the following Nominal bore (NB) size: 65 mm Ninety Six Only
Providing, fixing, jointing and testing, heavy Quality Gun metal or brass Non return valve confirming to IS 778, with screwed /
Two Thousand Five Hundred
2.00 flanged ends, 20 Kg/m2 of approved make, on water supply lines of the following Nominal bore (NB) size: 50 MM
Twenty Five Rupees Only
Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end
plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system
pipe line, pipe shall be jointed
Eight Hundred Seventy Six
440.00 with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm
Rupees And Paise Ninety Only
length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary
fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost
of all materials.(Soil + Waste + Rain Water)
Providing and fixing to wall ceiling and floor 10.0 Kg.F/Cm2 working pressure polythene pipes of the following outside Dia.
Two Hundred Eighty Rupees
11.00 Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and
And Paise Twenty Three Only
floor. (F) 75mm - Balcony + Standing Balcony + AC Drain
Providing and fixing to wall ceiling and floor 10.0 Kg.F/Cm2 working pressure poluthene pipes of the following outside Dia. One Hundred Seventy Three
19.00 Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and 173.71 Rupees And Paise Seventy
floor. (E) 50mm for waste water One Only
Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia. One Hundred Thirty One
155.00 Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and 131.96 Rupees And Paise Ninety Six
floor.(D) 40mm for waste water for Sink Only
may Be More Or In Figures
Providing, fixing, jointing and testing IS 14735 for Drain PVC SWR 'P' - traps of self cleansing design with water seal not less
than 50 mm., with or without vent, cutting chases / hole in floors / slabs and bringing the same in proper condition and
83.00 shape after placing the trap in right position in case of suspended / open plumbing or setting the trap in 1:2:4 CC in case of 606.00 Six Hundred Six Rupees Only
concealed plumbing , etc. complete, as required. The trap shall be 'P' type, of following sizes: 110 x 110 mm OD inlet / outlet
Providing and fixing Heavy class S.S. grating with Mosquito proof S.S. strainer of Chilly or equivalent make, as approved,
Four Hundred Nineteen
83.00 (cockroach trap) including setting in floor with cement mortor to match with floor finish as per architect requirements.
Rupees And Paise Fifteen Only
Providing and fixing in position cowel went to pipes.(C) Five Hundred Five Rupees
100mm dia And Paise Seventeen Only
Providing and fixing in position cowel went to pipes.(B)
Three Hundred Ninety Three
Rupees And Paise Four Only
Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of the
Three Hundred Fifty Nine
following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete.(C) 250mm
273.00 359.84 Rupees And Paise Eighty
Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of the
Two Hundred Fifty Rupees
26.00 following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete.(B) 150mm
And Paise Fifty Four Only
Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mm x
One Thousand Two Hundred
300mm size (inside) with standard weight.(i) Square mouth traps. (A) 100mm x 100mm size P type.
21.00 1292.19 Ninety Two Rupees And Paise
Supplying and fixing C.I. cover 300mm x 300mm without frame for Gulley trap (Standard pattern) te weight of cover to be not Four Hundred Ninety Seven
21.00 less 4.53 Kg.) 497.14 Rupees And Paise Fourteen
Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having crushing
strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total
weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 Two Thousand Nine Hundred
7.00 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick 2932.93 Thirty Two Rupees And Paise
with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(i) Inside Ninety Three Only
dimensions 455mmx 610mm and 450mm deep for single pipe line.
Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having crushing
strength not less than 35Kg/ Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total
weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4
mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside Seven Thousand One
8.00 plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. 7180.44 Hundred Eighty Rupees And
complete.(iii) Inside dimensions 600mm x 850 mm and 450mm deep for pipe lines with three or more inlets. Paise Forty Four Only
Extra over items 24.44 for every additional depth of 0.1M. of Three Hundred Twenty Five
16.00 part thereof beyond 450mm depth for Brick masonry 325.59 Rupees And Paise Fifty Nine
chamber.(iii) for 600mm x 850mm size. Only
C.I. Cover without frame 455mm x 610mm Nine Hundred Sixty Five
7.00 965.49 Rupees And Paise Forty Nine
may Be More Or In Figures
C.I. Cover without frame 600mm x 850mm Four Thousand Three
8.00 4331.02 Hundred Thirty One Rupees
And Paise Two Only
Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1- cement :2-coarse sand : 4-graded stone aggregate 20mm nominal
size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick
with Cement Mortar 1:3 (1-Cement : 3-coarse sand) finished with a floating coat of neat cement and making channels in
cement concrete 1:2:4 mix (1-Cement :2- Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete Eleven Thousand Forty Two
4.00 including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm 11042.74 Rupees And Paise Seventy
diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With Four Only
230mm thick walls of brick msonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5
(1- Cement: 5-Coarse sand) (1) A type depth 0.90 Metre for 150mm diameter sewer.
(I) Extra rate for constructing B.B. masonry for every Five Hundred Twenty Two
6.00 additional depth of 0.1M. or Part thereof over item No.24.27 522.96 Rupees And Paise Ninety Six
(I) for depth from 0.9M to 1.5M. Only
Installing, testing and commissioing of Pump system comprising of horizontal Submersible Pumps with SS casing, SS
impeller, SS Shaft and driven by 415 V AC, 3 phase, 50HZ., motor running at 2900 rpm speed and shall be supplied with all
accessories viz., base plate, coupling, motor, VFD based control panel, dry run & overload protection, cabling up to panel, Fifty Thousand Five Hundred
earthing, GI medium duty suction, delivery & header pipes, pressure gauge, pressure switches, pressure transmitter, suction Rupees Only
ball valves & delivery ball valves & check valves etc., complete. 200 lpm., @ 50mtr. HEAD , (To GROUND FLOOR TO
TERRACE TANK) FOR DOMESTIC WATER
Supply, installation, testing & commissioning of Water level controller for the OH tanks with switches, hardwares, interlocking Ten Thousand One Hundred
with panel, etc. For Under Ground tank & OH Tank Rupees Only
Constructing masonry Soak well with mesonery work bottom side 6'' PCC work, with minimum 9'' thik brick wall with 30%
One Lac Forty Five Thousand
opening in wall area, with Top side 6'' RCC Slab, 400x400 Inspection chamber, top side with FRP cover fitting, 110mm Air vent
2.00 145187.50 One Hundred Eighty Seven
line. Dia 3.0 Meter x 6 meter Depth (Optional Items)
Rupees And Paise Fifty Only
S.I.T.C. submersible pump set for bore of 200 mm. dia. or more having 3 phase motor capacity about 50-55 H.P discharge One Lac Seventeen
capacity having . Lifting and Lowering taken extra. Thousand Five Hundred Two
(A) ( 13 Stage) 100 to 400 L.P.M. discharge at the head 182 to 265 mtrs. suitable for 80 mm dia. Delivery pipe Cat.III Rupees And Paise Thirty Nine
Providing, Installation, testing & commissioning, in position European water closet comprising of Wall hung European W.C.
Pan in white colour, on approved type of chairs. 15 mm Concealed flush tank as directed. Five Thousand One Hundred
48.00 C.P health faucet with required length of flexible tube, clamp and bracket for fixing to wall, 15 mm C.P. brass heavy quality 5138.79 Thirty Eight Rupees And
angel stop cock for flushing health faucet Paise Seventy Nine Only
Fixing W.C. unit with chair brackets and accessories in position.
Providing, Installation, testing & commissioning, in position White vitrious ching W.C. sqatting pan Orrisa type
One Thousand Two Hundred
580 x 400 size in white colour, on approved type of chairs. 15 mm open flush tank as directed.
1.00 1290.77 Ninety Rupees And Paise
C.P health faucet with required length of flexible tube, clamp and bracket for fixing to wall, 15 mm C.P. brass heavy quality
Seventy Seven Only
angel stop cock for flushing health faucet Fixing
Providing, Installation, testing & commissioning, Wash basin with tap hole on basin comprising of Concealed type brackets
fixed to wall with adjustable clamp to push against counter rim. Concealed body parts for basin spout fixed to wall with basin
Spout 32 mm heavy plated C.P. waste coupling fitting with or without pop-up. Two Thousand Four
66.00 C.P. bottle trap with cleaning eye with extension piece and wall flange. 2409.12 Hundred Nine Rupees And
Painting brackets with two coats of white enamel paint over one coat of primer. Paise Twelve Only
CP Wash Basin Pillar Cock 15 mm C.P. brass heavy grade flexible inlet connection.
15 mm C.P. brass heavy quality angle stop cocks
may Be More Or In Figures
Providing, Installation, testing & commissioning, S. S. sink, single bowl of size not more than 600 / 450 mm and depth
mm with tap point on wall / counter comprising of Concealed type brackets fixed to wall with adjustable clamp to push
Three Thousand Six
against counter rim. 40 mm heavy plated C.P. waste coupling fitting with or without pop-up.
Hundred Twenty Eight
4.00 40 mm heavy plated C.P. bottle trap with cleaning eye with extension piece and wall flange. Painting brackets with two coats of
Rupees And Paise Forty Nine
white enamel paint over one coat of primer.
15 mm CP sink cock wall mounted.
Providing and fixing Urinal of approved quality including connection with trap and with integral longitudinal flush pipe.(A)
One Thousand Six Hundred
Squating plate pattern white earthenware 550mm x 300mm.
9.00 1631.88 Thirty One Rupees And Paise
Eighty Eight Only
Providing, Installation, testing & commissioning,screw down C.P. Water Bib cocks with wall flange of heavy quality with all Two Hundred Fourteen
10.00 accessories, supplied by owners. 214.81 Rupees And Paise Eighty One
Providing, Installation, testing & commissioning,screw down C.P. Angle cocks with wall flange of heavy quality with all
Two Hundred Five Rupees
30.00 accessories, supplied by owners. For Geyser, RO, & Washing Machine
And Paise Eighty Three Only
Providing, Installation, testing & commissioning, CP brass / S.S. towel rail, 600 mm. long and 20 mm. dia., with concealed
Six Hundred Sixteen Rupees
45.00 type brackets fixed, to the wall with CP brass screws, etc. complete.
And Paise Forty Two Only
Installation, testing & commissioning, screw-to-wall type toilet paper-roll holder, fixed to the wall with CP brass screws, etc. Four Hundred Twenty Seven
48.00 complete. 427.99 Rupees And Paise Ninety
Providing and fixing C.P. brass shower rose with 15mm Two Hundred Eighty Two
6.00 or 20mm inlet.(A) 100mm dia. Each 282.16 Rupees And Paise Sixteen
Providing and fixing C.P. brass spout 15mm. Job complete
One Thousand Five Hundred
Fifteen Rupees Only
Providing and fixing C.P. brass Single Lever Diverter Three Thousand Five
6.00 3535.00 Hundred Thirty Five Rupees
Providing laying and jointing in true line and level 160 diameter U.P.V.C. SWR Type B pipe confirmng to IS 13592-1992 with
one end plain and other end socketed with rubbering, & fitting conforming to ISI 14735-1999 of approved make for drainage
system pipe line, pipe shall be jointd with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of Eight Hundred Thirty Four
10.00 the size 160 mm diameter x 210 mm length x 196 mm high at every 2000 mm center to center or shall be concealed in walls 834.38 Rupees And Paise Thirty
as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with Eight Only
adhesive solvent cement including cost of all materials.SOR -23066
Providing. & laying (Two level or slopes)&jointing with stiff, mixture of cement mortar in proportion 1:1 Salt glazed stoneware
pipes following nominal internal dia. incl. testing of pipes and joints complete. SOR-24001AA with providing and laying Three Hundred Forty Nine
10.00 c.c.1:5:10 [1 Cement, 5 Fine sand, 10 graded stone Agg. 40mm nominal size] bedding for stoneware pipes with necessary form 349.31 Rupees And Paise Thirty One
work and curing complete. (A) 100 mm dia. [112 Avg. Bed Thickness] SOR -24002A Only
Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia.
Three Hundred Thirty Nine
10.00 Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and
Rupees And Paise Five Only
floor.(G)110 mm SOR It.code.23004G.
Providing & fixing soap dish holder of premium quality etc. complete. as directed by E.I.C. One Hundred Six Rupees
And Paise Five Only
may Be More Or In Figures
Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mm x One Thousand Two Hundred
1.00 300mm size (inside) with standard weight.(i) Square mouth traps.(B) 150mm x 100mm size P or R type SOR -24006B 1246.92 Forty Six Rupees And Paise
Ninety Two Only
Providing and fixing PVC SWR Nahni Trap IS 14735 for drain - 100 mm diameter with jali of the following nominal diameter of Five Hundred Eighty Six
2.00 self cleansing design with C.I. scread down or hinged grating including the cost of cutting and making good the walls. SOR - 586.27 Rupees And Paise Twenty
23068 Seven Only
Providing and fixing coloured wash down water closet (European type WC pan) with integral 'P' or 'S' trap with soil pipe in
cement mortar 1:1 (1 cement : 1 fine sand) with coloured plastic seat cover with CP brass hinges,Jet spray heavy duty with Two Thousand Fifty Eight
1.00 S.S. Braided hose 60 cm long with 15 mm dia brass screw down stop tap and rubber buffers including 15 mm dia flush cock 2058.14 Rupees And Paise Fourteen
and cutting holes in wall and making good the same etc complete. SOR Ch.23-It.code.23010+23017+Input Material M738 Only
Provdg. and fixing chromium platedbrass half turn flush cock of SAGAR,DELUX,ESSCO,GMT brands directed by engineer in Two Hundred Sixty Three
1.00 charge(1) 25 mm dia.SOR -23032B 263.77 Rupees And Paise Seventy
Providing and fixing urinal of approved connecting the urinal with waste pipe ,trap,and 15 mm dia stop tap etc. complete (A) One Thousand Two Hundred
2.00 White earthenware flat back or corner type size 430 x 260 x350 mm.SOR -23033+23030A 1280.69 Eighty Rupees And Paise
Sixty Nine Only
Providing and fixing flat back wash basin 550 mm x 400 mm size of first grade, white in colour with single hole for pillar tap
with CI or MS brackets painted with including cutting holes and making good the same including P/F 32 mm dia CP brass
One Thousand Six Hundred
waste coupling with waste pipe and P/F MI washer union 32 mm dia and P/F 15mm dia Pillar Tap capstan head screw down
2.00 1680.52 Eighty Rupees And Paise Fifty
high pressure with screws, shanks and back nuts and P/F 15 mm dia brass screw down Stop tap including inlet PVC
connection pipe 600 mm length etc complete. Ch.23-It.Code.23018+23020B+ 23021B+23035
Providing and fixing screw down bib taps of following size : (B) Brass chromium plated screw down bib tap (I) 15 mm dia. SOR One Hundred Eighty Six
2.00 -23028B1 186.83 Rupees And Paise Eighty
Provdg. & fixing Gun metal check or nonreturn full wheel valve. (A) 25 mm dia SOR -23031C Four Hundred Twenty
2.00 420.63 Rupees And Paise Sixty Three
Provdg. & fixing Gun metal check or nonreturn full wheel valve. (B) 40 mm dia.SOR -23031E Six Hundred Sixty Three
1.00 663.43 Rupees And Paise Forty Three
Constructing brick masonary chamber for underground C.I Inspection chamber and bends with bricks having crushing
stregth no less then 35 kg/cm2 in c:m 1 :5 C.I. cover with frame (light duty) 445 mm x 610 mm internal dimensions total
weight of cover with frame to be not less than 38 kg (wt. or cover 23 kg. and wt of frame 15 kg) R.C.C.top slab with 1: 2 : 4 mix Three Thousand Six
1.00 (1 Cement :2 coarese sand : 4 grade stone aggregate 20 mm size) foundation concrete 1 : 5 : 10 inside plaster 15 mm thick 3660.76 Hundred Sixty Rupees And
with cement mortar 1 : 3 finished smooth with a floating coat of neat cement on walls and bed concerete etc. complete.(ii) Paise Seventy Six Only
Inside dimension 500 mm x 700 mm and 450 mm deep for pipe line with one or two inlets. SOR -24016BA
Providing and fixing UPVC SWR Pipes in position for cowlvent 110mm dia. SOR Ch.23- It. code.23006C Five Hundred Five Rupees
And Paise Seventeen Only
Providing erecting and fixing double coated Sintex or equivalent PVC. (ISI) mark water tank of reqd capacity each with all Three Rupees And Paise
necessary fittings & connection etc. comp on terrace. SOR Ch.22-It.code.22014 Ninety Five Only
Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden plugs with C.P. brass scews.(B)
Five Hundred Ten Rupees
1.00 600mm x 20mm size.
And Paise Ten Only
Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. (i) 15mm dia.
Three Hundred Eight Rupees
2.00 Item No.: 23029A
And Paise Seventy Three Only
may Be More Or In Figures
Providing and fixing Two way BIB cock with wall flange of genuine Jaquar ompany brand, in with model no FUS-CHR29041, Three Thousand One
1.00 water tap brand or approved ISI brand quality, fixing in pieline and testing the same… etc., complete., as directed by EIC 3131.00 Hundred Thirty One Rupees
Providing and fixing SS finish Angular Stop cock for wash basin like Jaquar code FUS-29053
One Thousand Seven
1.00 1742.25 Hundred Forty Two Rupees
And Paise Twenty Five Only
Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS
PVC insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected with 6A Modular type switch /
bell push & accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box, single mounting base Five Hundred Eighty Two
374.00 frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected, with 582.77 Rupees And Paise Seventy
necessary Lamp holder/ceiling rose / H.D.Connector as directed. Seven Only
(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat-III
Point wiring for secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV
grade FRLS PVC insulated multi strand copper wires, in below type of pipe to be erected complete with earth continuity and
necessary connection with primary light with accessories erected on Metal / PVC / wooden box covered with 3 mm thick Two Hundred Rupees And
PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as Paise Ninety Nine Only
(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat-III
Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI marked
1.1 KV grade FRLS PVC insulated multi strand copper wires erected in below type of pipe with 6A Modular type switches and
following type of accessories erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured / Seven Hundred Twenty Five
14.00 metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary batten/angle holder or 725.18 Rupees And Paise Eighteen
ceiling rose or H.D.Connector as directed. (f) with Only
medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete
Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC
insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected with 6A Modular type switch and hum
free EME step type electronic fan regulator mounted and accessories with earth continuity of following type erected on PVC /
Eight Hundred Ten Rupees
153.00 Metallic/Wooden box, single mounting base frame covered with textured/metallic/white front plate modules erected on / in
And Paise Two Only
wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed.
(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat-III
Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC
insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch &
pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as
Six Hundred Twelve Rupees
26.00 per pipe erected with following type of accessories.
And Paise Six Only
[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board
(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling
complete Cat-III
Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC
insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch &
Eight Hundred Ninety Four
pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as
430.00 894.86 Rupees And Paise Eighty Six
per pipe erected with following type of accessories
[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.
(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat-III
may Be More Or In Figures
Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC
insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch &
pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as Eight Hundred Ninety Four
49.00 per pipe erected with following type of accessories 894.86 Rupees And Paise Eighty Six
[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board. Only
(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat-III (FOR UPS)
Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC
insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with Modular type switch &
pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as One Thousand Forty Six
18.00 per pipe erected with following type of accessories 1046.36 Rupees And Paise Thirty Six
[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing wire from mcb d b board.. Only
(FOR WATER COOLER)
(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat-III
Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden box,
Three Hundred Nine Rupees
123.00 single mounting base frame covered with textured / metallic/white front plate modules erected on / in wall / ceiling with
And Paise Six Only
following type accessories. Cat-III
Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame
covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed One Hundred Sixty Rupees
by Engineer In charge. And Paise Fifty Nine Only
(4) TV Co-axial Socket outlet Cat.III
Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame
covered with textured / metallic/white front plate , modules erected with necessary connections as per site situation directed Twenty Five Rupees And
by Engineer In charge. Paise Twenty Five Only
(7) Blank Plate Single Cat.III
Providing & erecting Switch board for Computer or electric apparatus consisting of following modular type accessories
mounted with PVC / Metallic concealed/open box with single mounting base frame covered with textured/metallic /white
One Thousand One Hundred
front plate,modules erected with necessary connections as directed
39.00 1133.22 Thirty Three Rupees And
1 no. 6A/16A universal plug-switch combined.
Paise Twenty Two Only
3 nos. 6A Switch
3 nos. 6A 5 pin Plug For Modular Type Accessories
Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling
erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in
approved manner as directed.
(B)25 MM Thirty Three Rupees And
Paise Thirty Three Only
Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling
erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in
approved manner as directed.
(c) 32 mm Fifty Four Rupees And Paise
Fifty Four Only
Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following
type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated
Seventy Eight Rupees And
4274.00 stranded wire of green colour for earth continuity of following size
Paise Seventy Eight Only
(A) with medium class Rigid PVC pipe and accessories
(a) 2 wire 1.5 sq. mm
may Be More Or In Figures
Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following
type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated
One Hundred Four Rupees
5360.00 stranded wire of green colour for earth continuity of following size
And Paise Three Only
(A) With medium class Rigid PVC pipe and accessories
(b) 2 wire 2.5 sq. mm
providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following
type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green
One Hundred Forty Rupees
791.00 colour for earth continuity of following size
And Paise Thirty Nine Only
(A) With medium class Rigid PVC pipe and accessories
(a) 2 wire 4 sq. mm
Providing and erecting decorative wall bracket fittings complete with LED lamp and rust free fittings components mounted in One Thousand Seven
22.00 chrome finish housing with holder ,clear/opaque glass diffuser complete erected with lead wires with minimum 15 wattage 1712.96 Hundred Twelve Rupees And
capacity as per instruction engineer incharge/architect/authority .cat-III Paise Ninety Six Only
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with
housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast
powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company
160V to 270V,Power Factor more than 0.95, THD < 15 %
CCT 3000 K to 6500K,
Five Hundred Eighty Nine
Luminaire efficacy> 85 lumens/watt
839.00 589.84 Rupees And Paise Eighty
LED driver efficiency > 85 %
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED
fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)
(A) Square/ Circular shaped
Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20
(iii) 16-20 watts, Surge-2 KV cat-III
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with
housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast
powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted body with company
160V to 270V,Power Factor more than 0.95, THD < 15 %
CCT 3000 K to 6500K, Five Hundred Eighty Nine
41.00 Luminaire efficacy> 85 lumens/watt , 589.84 Rupees And Paise Eighty
LED driver efficiency > 85 % Four Only
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED
fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)
(B) LED Panel Light with provision for Plane
front frame with translucent cover fixed to housing complete.IP20
(vi) 36 watts, 24" x 24", Surge- 2KV cat-III
Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above
assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with
smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with
toughened glass with company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %
Five Thousand Five Hundred
CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 % .( fittings
51.00 5581.26 Eighty One Rupees And Paise
required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The
Twenty Six Only
Engineer incharge may select any wattage capacity between the ranges shown.)
(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-voltage protection.
(iv) 90 - 119 watts Cat-lll
may Be More Or In Figures
Providing & erecting Approved make Power Saving 45 - 50 Watt Ceiling Fan with double ball bearing ISI mark with Condenser
One Thousand Nine
230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades with aluminium blades with , canopy & 30 cm. down rod
153.00 1948.29 Hundred Forty Eight Rupees
erected with earthing.(Make shall be approved by Engineer in charge))
And Paise Twenty Nine Only
Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up to 50mm length each side and
One Hundred Eight Rupees
153.00 pierced through a 16 Gauge M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with necessary finishing.
And Paise Seven Only
Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box. Eighteen Rupees And Paise
Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body with inbuilt lowers & One Thousand Three
18.00 square frame.For 200mm with 1350 RPM cat-ii 1366.53 Hundred Sixty Six Rupees
And Paise Fifty Three Only
Supplying and erecting approved make Octagonal pole made from HR sheet steel. The pole should be made as per IS. and
shall be coated with hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with integral Junction
box consist of terminal plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type
Seven Thousand Five
terminal and arrangement for cable termination to be erected With Suitable foundation (Included) as per details given by
51.00 7561.87 Hundred Sixty One Rupees
manufacturer considering site requirement. (C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm thickness
And Paise Eighty Seven Only
with 200mmX200mmX12mm base plate, 4-M16 Bolts and 600mm long with necessary G.I. J Bolts .Approx Pole weight 46 kg
Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation for the pole of size 45 x 45 x
cm. Deep in below ground level with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) high upper ground level with necessary Eight Hundred Nine Rupees
curing and finishing in approved manner. And Paise One Only
( for 4 & 6 mtr pole)
Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop-out approx. 2mm thick box complete
with Bakelite connector strip 5way(3P+N+E),DIN rail for mounting mob & hinged doors as per requirement having locking
Eight Hundred Ninety Eight
51.00 arrangements with mounting clamp with nuts, bolts & washers suitable for erection on pole with cable clamps& earth bolt of
Rupees And Paise Ninety Only
following size of box.
(A) 300mm x 200mm x 100mm [deep]
Providing and erecting street light pole bracket comprising main B Class GI pipe of 4.2 cm/require outside dia. complete with
suitable B Class G.I sleeve tubing of approx. 45cms.length and suitable for 76.5 mm / 80mm. / require size pole top having
sufficient fasteners for fixing the brackets and having spread of 1 mtr. length with suitable rise as per site condition & suitable
Six Hundred Fourteen
39.00 welded stiffener reducer and nipple with check nut complete painted with one coat of Red oxide / PU base primer and two
Rupees And Paise Eight Only
coats of Aluminium / PU paint. paint with following nos of arms.
[a] Single Arm bracket 1 Mtr
Providing and erecting street light pole bracket comprising main B Class GI pipe of 4.2 cm/require outside dia. complete with
suitable B Class G.I sleeve tubing of approx. 45cms.length and suitable for 76.5 mm / 80mm. / require size pole top having
sufficient fasteners for fixing the brackets and having spread of 1 mtr. length with suitable rise as per site condition & suitable Eight Hundred Twenty Nine
12.00 welded stiffener reducer and nipple with check nut complete painted with one coat of Red oxide / PU base primer and two 829.21 Rupees And Paise Twenty
coats of Aluminium / PU paint. paint with following nos of arms. One Only
[B] Double Arm Bracket 1 Mtr
may Be More Or In Figures
Supply of Smart Streetlight Control & Monitoring System having an Individual Streetlight Controller(iSLC) for control,
monitoring, & fault detection of each streetlight., Equipped with a 32-bit CPU., Operates on 90V to 600 V AC , Has 1 output
for 0% -100% dimming & compatible with 0-10 V LED dimmable driver., Individual streetlight Cloud software-based dimming,
scheduled dimming & motion-based dimming for each streetlight., ISLC with in-built Microwave Motion Sensor. Motion sensor
based adaptive dimming facility to turn 100% in streetlights ahead when vehicle/pedestrian approaches. It must be cloud-
based settable to set number of ahead streetlights to be brightened., Microwave Motion sensor detection range upto 9 m.,
Synchronized with other zones streetlight mesh networks via roaming trigger., User-adjustable dimming intensity., iSLC must
be tested from an NABL Lab for Surge Test @ 8kV as per (IEC 61000)/ @ 6 KV (IEC 61000-4-5), ESD Test @ 4 KV (IEC 61000-
4-2) , EFT @ 2 KV (IEC 61000-4-4), Conducted Emission @ 150 KHz-30 MHz (CISPR11), Cold Test (-10 deg C) for 4 hours IS:
9000 (Part 2/Secc.4):1977 latest, Damp Heat Test (40 Deg C @ 95% RH) 2 cycles of 12+12 hours (IS: 9000 (Part 5/Sec.2):1981
latest), Ingress Protection for IP65 as per IEC 60529 with all test passing criteria as “Temporary degradation or loss of function
or performance which is self-recoverable”., Includes Clamps to install iSLC on Pole with iSLC angle position (0 Deg. To
Deg.) adjustment facility., Operates on IoT Mesh WiFi / Wi-Sun / Zigbee / sub-GHz technologies., Bidder must provide
backhaul infrastructure for communication technology for 5 years., ISLC with in-built energy monitoring chip. Must monitor
V, I, PF, F, KW, KWh., Built-in Surge protection., “Fail-safe”: iSLC ensures lights remain ON when iSLC fails., Accelerometer
inside iSLC for pole movement alert., Failure of one iSLC will not affect others., Local configuration via WiFi / BLE for
maintenance or during force majeure., In-built GPS chip for iSLC precise mapping & astronomic location., Programmable
dimming schedules daily, monthly, yearly, special events, astro-clock for sunset/sunrise time with monthly offset., Live status
CCMS Web dashboard with secure password & OTP login., iSLC software must integrate with Group Controller or operate on a
common platform., Hosted on trusted cloud, data security, antivirus & attack protection., HTTPS., AES256-bit encryption.,
Vulnerability Assessment and Penetration Testing (VAPT) certificate for CCMS Software., Streetlight management software for
load status, live analytics & reports., Energy meter data (kW, kWh, PF, I, V, etc.) available., Utility data reconciliation & Class
1 accuracy reports for billing., Energy monitoring & auditing for streetlight infrastructure., Fault detection & alerts.,
Customizable CCMS Software., WhatsApp integration, SMS & Email Alerts., Hierarchy-wise reporting & alerts., GIS mapping Ten Thousand Two Hundred
of live connected streetlight control panels & streetlights., OTA updates., Smartphone app with local configuration & One Rupees Only
navigation., Monitoring & reporting of lighting parameters., Work permits, media attachments for site photos etc. per Feeder
Panel for remote verification., Asset management module for streetlight infrastructure data & GIS mapping.,
Complaint/service management with history & escalation must be available., Includes 5 years of data hosting,
communication, & cloud services with CCMS Web Dashboard.,
Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 25 KA. at
V,having normal current rating up to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50 Six Thousand Seven
19.00 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. 6790.23 Hundred Ninety Rupees And
ICS=100% of ICU only Cat III Paise Twenty Three Only
Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at
V. having normal current rating 125A. with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all Eight Thousand Eight
2.00 internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. 8861.74 Hundred Sixty One Rupees
ICS=100% of ICU only Cat III And Paise Seventy Four Only
Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at
Seventeen Thousand Eight
V. having Normal current rating 200A.with variable Thermal & magnetic release suitable to work on A.C.supply 50 Hz. with all
8.00 17843.67 Hundred Forty Three Rupees
internal connections, spreader tinned copper & complete erected in existing 16 G.M.S.housing ICS=100% of ICU only
And Paise Sixty Seven Only
Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. and
above at 415 V . having normal current rating 250A. with variable thermal & magnetic release suitable to work on A.C.supply Twenty Three Thousand
2.00 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. 23041.13 Forty One Rupees And Paise
ICS=100% of ICU only Cat III Thirteen Only
may Be More Or In Figures
Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 50 KA and Twenty Seven Thousand
above at 415 V having Normal current rating 400A. with variable Thermal & magnetic release suitable to work on A.C.supply Seven Hundred Fifty One
50 c/s. With all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. Rupees And Paise Seventy
Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 50 K.A. and Twenty Seven Thousand
above at 415 V having normal current rating up to 630A. with variable thermal & magnetic release suitable to work on Seven Hundred Fifty One
A.C.supply 50 Hz. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing Rupees And Paise Seventy
Providing and erecting Approved make Three pole moulded case circuit breaker having breaking capacity ICU of 25 K.A. at
V having normal current rating up to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50 Five Thousand Eight
9.00 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. 5890.32 Hundred Ninety Rupees And
ICS=100% of ICU only Cat III Paise Thirty Two Only
Supply of Approved make Iron Clad or metal clad four pole change over switch 415V. confirming to IS of following capacity (B) Twelve Thousand Two
1.00 100 A / 125 A Cat III 12240.19 Hundred Forty Rupees And
Paise Nineteen Only
Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus
having current density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour
Three Thousand Sixty One
insulating tape for phase sequence of following current carrying capacity, erected with necessary bus bar supports
3.00 3061.31 Rupees And Paise Thirty One Rn.Mtr
/insulators, main cable socket to each busbar,erected in existing cubical panel with necessary connections.
(E) Suitable for 630 Amp. capacity
Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus
having current density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour
One Thousand Four
insulating tape for phase sequence of following current carrying capacity, erected with necessary bus bar supports
10.00 1469.55 Hundred Sixty Nine Rupees Rn.Mtr
/insulators, main cable socket to each busbar,erected in existing cubical panel with necessary connections.
And Paise Fifty Five Only
(C) Suitable for 300 Amp. Capacity
Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus
having current density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour
One Thousand Thirty Seven
insulating tape for phase sequence of following current carrying capacity, erected with necessary bus bar supports
20.00 1037.27 Rupees And Paise Twenty Rn.Mtr
/insulators, main cable socket to each busbar,erected in existing cubical panel with necessary connections.
(B) Suitable for 200 Amp. capacity
Providing and erecting Approved make Earth fault Relay suitable to mount with inter connection suitable to following size of
Five Thousand Nine
moulded case circuit breaker having CT ratio & MCCB rating as following along with shunt trip 220V AC. with all internal
1.00 5956.98 Hundred Fifty Six Rupees
connections & complete erected in existing M.S.housing.
And Paise Ninety Eight Only
providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having One Hundred Twenty Three
337.00 breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III 123.22 Rupees And Paise Twenty
Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & Three Hundred Thirty
13.00 confirms to IS : 8828 in existing box having following capacity 330.27 Rupees And Paise Twenty
(A) 6 to 32 Amp. Seven Only
Providing and erecting 415 Volt MCB four pole motor & inductive load (c Curve) having 10 KA Breaking capacity and Seven Hundred Thirty Five
14.00 confirms to IS : 8828 in existing metal box having following capacity. 735.28 Rupees And Paise Twenty
(b)40 Amp. Cat- III Eight Only
Providing and erecting 415 Volt MCB four pole motor & inductive load (c Curve) having 10 KA Breaking capacity and Eight Hundred Eleven
confirms to IS : 8828 in existing metal box having following capacity. Rupees And Paise Three Only
may Be More Or In Figures
providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit
withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick action &
Two Thousand Four
tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected as directed
43.00 2458.34 Hundred Fifty Eight Rupees
(ii) 40Amps. DP Cat. III
And Paise Thirty Four Only
Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar,
neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of
Two Thousand Nine Hundred
MCBs.(The DBs should be used of same company of MCB to be used) suitable for
2.00 2913.85 Thirteen Rupees And Paise
(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI)
Eighty Five Only
(b) sheet steel double door
Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar,
neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of
Three Thousand Four
MCBs.(The DBs should be used of same company of MCB to be used) suitable for
4.00 3412.79 Hundred Twelve Rupees And
(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI)
Paise Seventy Nine Only
(b) sheet steel double door
Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar,
neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of Three Thousand Eight
MCBs.(The DBs should be used of same company of MCB to be used) suitable for Hundred Seventy Four
(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) Rupees And Paise Thirty Six
(b) sheet steel double door Only
Supplying and erecting approved make panel mounting type Digital Voltmeter having 3 digits LED display, 0 to 750 AC Volts
One Thousand Two Hundred
range erected on existing panel board with all connection, wiring etc .with manufacturers calibration certificate.
7.00 1275.63 Seventy Five Rupees And
Paise Sixty Three Only
Supplying and erecting approved make panel mounting type Digital Ammeter having 3 digits LED display, external CT
One Thousand Five Hundred
operated, calibrated for 0 to 1000 Amps suitable to operate on 500 Volt AC , erected on existing panel board with all
7.00 1558.43 Fifty Eight Rupees And Paise
connection, wiring etc .with manufacturers calibration certificate.
Forty Three Only
Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC Supply 500 V on existing panel board with Three Hundred Seventeen
7.00 necessary connections. 317.14 Rupees And Paise Fourteen
Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 VA burden erected in existing CRCA Two Hundred Seventy Four
7.00 box duly secured with insulating materials connected to the meter 274.72 Rupees And Paise Seventy
Supplying and erecting approved make set of indicator lamps of LED type lamp, lens cover, Bakelite holder complete erected Forty Three Rupees And
with necessary connections. Paise Forty Three Only
may Be More Or In Figures
Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing Electrode consisting Pipe-in-
Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-
200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm
with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type
of applications with chamber and heavy duty cover (A)(approved make OEM has to submit test certificate including value of
earth resistance of installation duly stamped and signed by agency and officer Incharge has to ensure the value of earthing Five Thousand Eight
5.00 resistane mentioned in test Certificate) & having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 5842.85 Hundred Forty Two Rupees
0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2% (C) Back And Paise Eighty Five Only
fill Compound :- Earthing compound should be capable to retain moisture for long time Necessary test report must be
submitted by Agency. [A] For electrical installation up to 440 V
Length of Pipe - 1 Mtr
Back filling compound - 1 Nos. of Bag of 15 Kgs.
Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing Electrode consisting Pipe-in-
Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-
200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm
with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type
of applications with chamber and heavy duty cover (A)(approved make OEM has to submit test certificate including value of
earth resistance of installation duly stamped and signed by agency and officer Incharge has to ensure the value of earthing
Seven Thousand Ninety Five
resistane mentioned in test Certificate) & having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:-
8.00 7095.25 Rupees And Paise Twenty
0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2% (C) Back
fill Compound :- Earthing compound should be capable to retain moisture for long time Necessary test report must be
submitted by Agency. [B] For Electrical installation up to 11 kV located in other than normal soil i.e. Soft Rock, Marshy
-Length of Pipe : 2 mtr
-Back filling Compound :1 no. Bag of 25 Kg.
Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing Electrode consisting Pipe-in-
Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-
200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm
with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type
of applications with chamber and heavy duty cover (A)(approved make OEM has to submit test certificate including value of
earth resistance of installation duly stamped and signed by agency and officer Incharge has to ensure the value of earthing
resistane mentioned in test Certificate) & having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- Ten Thousand Five Hundred
15.00 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2% (C) Back 10593.89 Ninety Three Rupees And
fill Compound :- Earthing compound should be capable to retain moisture for long time Necessary test report must be Paise Eighty Nine Only
submitted by Agency. (c) For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant &
Sensitive Computer System(like Automation, SCADA) i.e independent Earthing in normal soil.
Length of Pipe : 3.00 mtrs
Back filling Compound :2 nos Bags of 25 Kg.
Supplying & erecting funnel type earthing having earth plate of following size burred in specifically prepared earth pit 3 mtr.
below ground with 40 kg. charcoal and salt with alternate layers of charcoal & salt, 20mm.dia. G.I. pipe with Funnel with a
Seven Thousand Eight
wire mesh for watering & bricks masonry block, C.I. Cover complete as per para 7.3 of IS 3043 with necessary length of double
Hundred Seventy Four
8.00 Galvanised Iron / copper earth wire No 6 SWG bolted with lug to the plate and covered in 12 mm dia. G.I. pipe 2.5 mtr long
Rupees And Paise Ninety
complete connected to the nearest switch gear with end socket as per direction & duly tested by earth tester confirming to IS
(As per drawing) with following specification (C) with 60 x 60x 0.315 cms. Copper earth Plate
may Be More Or In Figures
Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing Electrode consisting Pipe-in-
Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-
200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm
with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type
of applications with chamber and heavy duty cover (A)(approved make OEM has to submit test certificate including value of
earth resistance of installation duly stamped and signed by agency and officer Incharge has to ensure the value of earthing
resistane mentioned in test Certificate) & having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:-
0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2% (C) Back
fill Compound :- Earthing compound should be capable to retain moisture for long time Necessary test report must be
submitted by Agency.
supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber
grommets, rib, bakelite control fuses/MCB for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base
Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy duty end terminal
connection,danger notice board,necessary ventilation,earthing strip complete. The Panel shall be painted with epoxy powder
coating. (B) The standard companies switch gear shall be used and only manufacturers at CPRI approved factory
(i) with 350mm depth
Ten Thousand Four Hundred
8.00 10468.65 Sixty Eight Rupees And Paise Sq.Mtr
Sixty Five Only
(ii) With 550 mm. Depth
Thirteen Thousand Five
8.00 13576.42 Hundred Seventy Six Rupees Sq.Mtr
And Paise Forty Two Only
Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper size of M.S.
angles,square,round, flats, bars, channels, sections complete with cutting, welding, grinding & finishing duly painted with one Seventy Seven Rupees And
coat of red oxide with erection on site as per direction of engineer in charge with necessary grouting, cementing, plastering & Paise Seventy Seven Only
finishing complete.
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on Two Hundred Sixty Four
281.00 wall with necessary clamps or in existing trench / pipe of following size of cables 264.62 Rupees And Paise Sixty Two
(B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core) Only
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on
Four Hundred Fifty Four
100.00 wall with necessary clamps or in existing trench / pipe of following size of cables
Rupees And Paise Fifty Only
(D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core)
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on Five Hundred Eighty Eight
307.00 wall with necessary clamps or in existing trench / pipe of following size of cables 588.83 Rupees And Paise Eighty
(E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core) Three Only
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on Six Hundred Forty Eight
165.00 wall with necessary clamps or in existing trench / pipe of following size of cables 648.42 Rupees And Paise Forty Two
(F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core) Only
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on Eight Hundred Seventy
2.00 wall with necessary clamps or in existing trench / pipe of following size of cables 877.69 Seven Rupees And Paise Sixty
(G) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core) Nine Only
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on One Thousand Four
110.00 wall with necessary clamps or in existing trench / pipe of following size of cables 1401.88 Hundred One Rupees And
(I) 3 1/2 core 240 Sq. mm( 120 Sq. mm 1/2 core) Paise Eighty Eight Only
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on
One Thousand Six Hundred
wall with necessary clamps or in existing trench / pipe of following size of cables
495.00 1689.73 Eighty Nine Rupees And
(J) 3 1/2 core 300 Sq.mm ( 150 Sq. mm 1/2 core)
Paise Seventy Three Only
may Be More Or In Figures
Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on
Three Rupees And Paise
396.00 wall with necessary clamps or in existing trench / pipe of following size of cables
(A) 4 core 16 Sq. mm
Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on Two Hundred Twenty Nine
440.00 wall with necessary clamps or in existing trench / pipe of following size of cables 229.27 Rupees And Paise Twenty
(B) 4 core 25 Sq. mm Seven Only
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for 1.1 KV. to be laid
Four Hundred Fifty Five
on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables.
352.00 455.51 Rupees And Paise Fifty One
(B) 4 core 4 Sq. mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for 1.1 KV. to be laid
Six Hundred Thirty Seven
on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables.
176.00 637.31 Rupees And Paise Thirty One
(C) 4 core 6 Sq. mm
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall
Eight Hundred Forty Six
with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables.
374.00 846.38 Rupees And Paise Thirty
(A) 4 core 10 Sq. mm
Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete
Thirty Three Rupees And
7.00 with out going tails, insulating tape etc for following size of cables.
Paise Thirty Three Only
(A) 2 to 4 core 2.5 / 4 Sq. mm
Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete
Thirty Eight Rupees And
31.00 with out going tails, insulating tape etc for following size of cables.
Paise Thirty Eight Only
(B) 2 to 4 core 6 Sq. mm
Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete
Thirty Eight Rupees And
20.00 with out going tails, insulating tape etc for following size of cables.
Paise Thirty Eight Only
(C) 2 to 4 core 10 Sq. mm
Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete
Forty Seven Rupees And
20.00 with out going tails, insulating tape etc for following size of cables.
Paise Forty Seven Only
(D) 2 to 4 core 16 Sq. mm
Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete
Fifty One Rupees And Paise
9.00 with out going tails, insulating tape etc for following size of cables.
(E) 2 to 4 core 25 Sq. mm
Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated
Seventy Five Rupees And
7.00 armoured cable complete with out going tails, insulating tape etc for following size of cables.
Paise Seventy Five Only
(B) 3 & 1/2 core 35/50 Sq. mm
Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated
One Hundred Thirty One
7.00 armoured cable complete with out going tails, insulating tape etc for following size of cables.
Rupees And Paise Thirty Only
(D) 3 & 1/2 core 95 Sq. mm
Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated
One Hundred Forty Rupees
2.00 armoured cable complete with out going tails, insulating tape etc for following size of cables.
And Paise Thirty Nine Only
(E) 3 & 1/2 core 120 Sq. mm
Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated
One Hundred Ninety Rupees
4.00 armoured cable complete with out going tails, insulating tape etc for following size of cables.
And Paise Eighty Nine Only
(F) 3 & 1/2 core 150 Sq. mm
Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated Two Hundred Forty Seven
2.00 armoured cable complete with out going tails, insulating tape etc for following size of cables. 247.45 Rupees And Paise Forty Five
(H) 3 & 1/2 core 240 Sq. mm Only
Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated
Two Hundred Eighty Rupees
13.00 armoured cable complete with out going tails, insulating tape etc for following size of cables.
And Paise Seventy Eight Only
(I) 3 & 1/2 core 300 Sq. mm
may Be More Or In Figures
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high
pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Thirteen Rupees And Paise
(B) 10 Sq.mm Thirteen Only
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high
pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Fifteen Rupees And Paise
(C) 16/25 Sq.mm. Fifteen Only
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high
pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Twenty Rupees And Paise
(D) 35/50 Sq.mm. Twenty Only
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high
pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Twenty Five Rupees And
(E) 70 Sq.mm. Paise Twenty Five Only
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high
pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Forty Rupees And Paise
(F) 95 Sq.mm. Forty Only
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high
pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Forty Five Rupees And Paise
(G) 120 Sq.mm. Forty Five Only
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high
pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Sixty One Rupees And Paise
(H) 150 Sq.mm. Sixty One Only
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high
pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Eighty Five Rupees And
(J) 240 Sq.mm. Paise Eighty Five Only
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high
pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Ninety Eight Rupees And
(K) 300 Sq.mm. Paise Ninety Eight Only
Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure
Eight Rupees And Paise
70.00 tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (A) 1.5/ 2.5/4/6
Providing and erecting metallic vitrified danger notice board as per language suggested by engineer incharge for MEDIUM Sixty Nine Rupees And Paise
VOLTAGE installation to be erected as per IS-2551. Sixty Nine Only
Providing & erecting Medium Voltage Danger Notice Board sticker as per language suggested by engineer incharge of standard Twenty Six Rupees And Paise
size as per IS-2551 Twenty Six Only
Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below ground across the road crossing or on floor with
Three Hundred Forty Three
150.00 necessary material in an approved manner and making the ground as per original.
Rupees And Paise Forty Only
Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with
One Hundred Thirty Seven
necessary connecting accessories of same material at required depth in existing trench for laying of cable. below ground /
200.00 137.36 Rupees And Paise Thirty Six
road surface for enclosing cable
(D)120 mm outer dia.
may Be More Or In Figures
Making trench in all soil of suitable width of 90 cm deep for laying cable or locating the fault all over the run and back filling Fifty Five Rupees And Paise
the same and making the surface as normal ground. Fifty Five Only
Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The cable tray should be single or
double bended as per required and as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. Four Hundred Twenty Four
150.00 with max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erection with 424.20 Rupees And Paise Twenty
necessary support( included) as per Specification and as per instruction of engineer in charge..(3) 150 X 50 X 1.6 mm Thick Only
Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The cable tray should be single or
double bended as per required and as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. Six Hundred Twenty Two
200.00 with max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erection with 622.16 Rupees And Paise Sixteen
necessary support( included) as per Specification and as per instruction of engineer in charge..(5) 300 X 50 X 2.0 mm Thick Only
Supplying and erecting approved make online Un-interruptible Power Supply system comprising flat cum-boost charger with
IGBT base rectifier & Inverter & sealed maintenance free SMF batteries. The charger having operating capacity for input 160-
Three Lac Ninety Seven
270V AC & inverter having output 230V,50 Hz Ac with 0.8 load power factor with battery, over/under voltage output with
Thousand Three Hundred
1.00 over load & short circuit protection equipment. The system housed in CRC sheet duly powder coated paint with following
Twenty Four Rupees And
power backup.with MS painted batteries stand, 10% Overload capacity for momentary load.
Paise Ninety One Only
(J) 20 kVA 3 - phase with 1Hr Backup
Supplying and erecting approved make online Un-interruptible Power Supply system comprising flat cum-boost charger with
IGBT base rectifier & Inverter & sealed maintenance free SMF batteries. The charger having operating capacity for input 160- Five Lac Eighty One
270V AC & inverter having output 230V,50 Hz Ac with 0.8 load power factor with battery, over/under voltage output with Thousand One Hundred
over load & short circuit protection equipment. The system housed in CRC sheet duly powder coated paint with following Seventy Nine Rupees And
power backup.with MS painted batteries stand, 10% Overload capacity for momentary load. (K) 30 kVA 3 - phase with 1Hr Paise Twenty Five Only
Providing and erecting ISI Marked 3core 120 Sq.mm XLPE insulated 11 kV armoured cable Aluminium conductor IS-7098 to
One Thousand Five Hundred
be laid on wall with clamps or in provided cable trench / pipe approved manner as directed.
200.00 1542.27 Forty Two Rupees And Paise
Twenty Seven Only
Providing and erecting cable end termination kit, heat shrinkable Push on type Densons/ Raychem/ Elastimold make suitable Fourteen Thousand Six
4.00 for 11 kV XLPE cable 3core 95 & 120 Sq.mm (A) Outdoor type 14611.67 Hundred Eleven Rupees And
Paise Sixty Seven Only
Providing and erecting cable end termination kit, heat shrinkable Push on type Densons/ Raychem/ Elastimold make suitable
Eight Thousand Four Rupees
4.00 for 11 kV XLPE cable 3core 95 & 120 Sq.mm (B) Indoor type
And Paise Twenty Five Only
may Be More Or In Figures
X'MER "Supply, installation,
testing, and commissioning of 315 kVA, 11 kV / 0.415 kV, 3-Phase, 50 Hz, Oil-Cooled, Outdoor type Copper Wound
Distribution Transformer conforming to IS:2026 and IS:1180 (Part-1) Energy Efficiency Level-2 (or latest amendments),
complete with all standard fittings and accessories as per DISCOM/CEA guidelines.
The transformer shall be equipped with an On-Load Tap Changer (OLTC) on the HV winding side to provide a tap range of +5%
to -15% in steps of 1.25% (total 17 positions), suitable for local manual control as well as remote electrical control through an
RTCC (Remote Tap Changing Cubicle) Panel.
Technical Specifications:
• Rating: 315 kVA Twelve Lac Twelve Thousand
• Voltage Ratio: 11000 Volts / 415-250 Volts Rupees Only
• Cooling Type: ONAN (Oil Natural Air Natural)
• Winding Material: Electrolytic Grade Copper (both HV and LV)
• Vector Group: Dyn11
• Core: High-grade, low-loss, Cold Rolled Grain Oriented (CRGO) Silicon Steel laminations.
• Standard Accessories to be included: Conservator tank with magnetic oil level gauge, Prismatic oil level indicator, Silica gel
breather, Explosion vent / Pressure Relief Device (PRD), Buchholz Relay with alarm and trip contacts, Dial-type Oil
Temperature Indicator (OTI) and Winding Temperature Indicator (WTI), HT/LT Bushings with terminal connectors, Air release
plug, Drain valve, Filter valve, Earthing terminals, Marshalling box, and Bi-directional rollers."
Providing, erecting, testing commissioning & getting Plan Approval as well as NOC from Electrical Inspector for extensible H.T
panel comprising of one 630A/800A/1250A. H.T. VCB incoming & Two outgoing 630/800/1250 A Drawout type VCB
confirming as per I.S. for use on 11 kV, 3 phase, 50 Hz. unearthed A.C. supply system having breaking rupturing capacity of
350 MVA or Above complete with spring operated mechanism, mechanically & automatic ON-OFF and spring mechanism
Thirteen Lac Twenty Eight
charged, discharged indicators, ON-OFF mechanical push button, operation counter necessary auxiliary switches, closing
Thousand Eight Hundred
1.00 shunt trip, air insulated busbar chamber having heat shrinkable PVC sleeves, mechanical interlocks safety shutters, isolating
Thirty Six Rupees And Paise
plugs and a VCB trolley with three vacuum interrupters with epoxy support insulators and self aligning finger type isolating
contacts. The breaker shall be Manual cum motorised mechanism & auto spring charge with TNC switch closing with
following accessories. The Standared Companies Switchgear shall be Used and Only Manufacutres as per IEC 62271-200/201
for beneficial use.
1.flush mounting type digital multifunctional meter with communication facility - Three sets.
2. Power Factor Meter One No
3. Double core current transformer cast resin type having ratio 200 to 50/1 core for metering & second core for protection
having required class of accuracy. - Three Sets
4. Instantaneous under voltage relay,Over Voltage relay & Temperature rise Tripping Relay
5. Electrical closing coil & short trip coil operating on 110V. D.C.- Three Sets
6. Auxiliary relay for anti pumping device
7. Three phase Three limb Drawout type feeder connected & output of 200 VA cast resin insulated potential transformer
having ratio 12000V./110V. and 200 VA Burdon with 0.5 accuracy. - One No.
8. Common Alarm bell operating on 110V A.C.- One No.
9. Digital KWH Meter - One No.
10. Cable boxes suitable up to 11 kV 3core 150 sq.mm XLPE cable. - Three Nos.
11. 230V. A.C. to 110V. D.C. power pack for closing & tripping circuit common.
may Be More Or In Figures
12.Breaker ON-OFF, Auto trip and spring charged indicators. - Three Sets.
13.Phase indicating & panel illumination lamps with plug socket - Three Sets.
14.Numerical Communicable type non directional O/C & E/F Relay with
a setting of 5-250% both in O/C & E/F. -Three Set
complete with necessary interconnection with air insulated high grade copper busbar {Breaker Testing scope include Closing
Time, Opening Time, VCB Hi-Pot test at Site}{ Relay Testing Scope Include testing of all protection by three phase testing kit at
site }(VCB Trolley is to be provided)
Supply, installation, testing and commissioning of 12/24 kV, extensible/non-extensible, SF6 gas-insulated Ring Main Unit
(RMU) enclosed in a weatherproof metal housing, comprising 3-Way / 4-Way configuration (e.g., 2 Load Break Switch ways for Three Lac Sixty Eight
1.00 incoming/outgoing ring + 1/2 Circuit Breaker way(s) with self-powered numerical relay for transformer protection), complete 368650.00 Thousand Six Hundred Fifty
with auxiliary contacts, pressure indicator, fault passage indicator (FPI), base channel, hardware, and routine test certificates Rupees Only
as per relevant IEC standards.
Providing, and erecting 11 kV D.P. 9 mtr. high Structure made of 6" x 3" ‘I’-Section Girder, 4" x 2"channels, clamps, nuts,
bolts etc. Suitable for erection of the followings duly connected with necessary ACSR conductors. as per drawing approved by
the Engineer- in charge complete with following. Height as per IS 7 Mtr above ground ) (A) 11 kV 200 Amps Drop out
fuses with S.R.B.P. tubes carries.-Three nos (B) 11 kV G.O.D. switch complete Ninety Eight Thousand Four
1.00 with insulators, operating handle with galvanised pipe, Sq.bar etc. 400 Amp.- One Set (C) 11 kV 98433.59 Hundred Thirty Three Rupees
lightening arrestor with clamp- Three Nos. (D) 11 kV shackle insulators- Six Nos. And Paise Fifty Nine Only
(E) The above D.P. structure should be earthed with 25 mm.X 3 mm thick double copper earth strips run
separately and connected with separate copper plate earth electrode.
Supplying and erecting, commissioning and testing of Diesel Generating set confirming to IS: 4722:1968 & BS:5514 having
continuous rating, 3 phase, 415 volts, 50 cycles A.C. supply comprising of a totally enclosed air/water cooled diesel engine
with multi-cylinders developing suitable BHP not less than following capacity at 1500 RPM with 10% overload for one hour in
24 hours with standard accessories like fly wheel, lubricating oil cooler, "A" class governor, heavy duty fuel wheel and
lubricating oil filter, oil bath air filler, lubricating oil pressure gauge, end exhaust manifold, standard set of tools with
adjustable spanners, screw drivers, cylinder head to cover, joint cylinder head to exhaust, element lube oil filter, 12 / 24 volts
electric starting equipment complete with standard heavy duty battery, dynamo, cut-outs, ammeter, necessary wiring, Thirty Three Lac One
1.00 pressure gauge, starter etc and heavy duty Residential type exhaust silencer (With DEF System) and vertical hot air duct both 3301014.31 Thousand Fourteen Rupees
logged with asbestos rope, save oil trays, exhaust piping of required length, standard wall/floor mounted fuel with level And Paise Thirty One Only
indicator and piping and drip proof alternator, self excited, self regulated, screen protected, with excitation system, capable of
delivering the rated system output at 415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire, running at 1500 RPM, conforming to IS-4722-
1968 with voltage regulation +/- 5% of rated voltage from no load to full load. Both the engine and alternator fitted on a
common fabricated steel base plate with antivibration mounting engine and alternator both connected to each other by
flexible flange coupling and with floor/wall mounted control panel box comprising of voltmeter ammeter, selector switches,
ACB / MCCB / MCB of adequate capacity,
indicator lamps duly wired with HRC fuses. The alternator & control panel shall be connected with provided suitable capacity
armoured cable and complete with Acoustic enclosure (canopy) made out of 16 SWG CRCA Sheet, sound absorbing material
Rockwool of 64 density & 100 mm thick conforming to IS:8183 / PU Foam of 40 Density - at least 40 mm. The resin bonded
rockwool covered from inside the canopy by perforated sheet with 3/4 mm holes, sound level not more than 75 dB at a
distance of 1 mtr, as per PVCT norms.DG set should have in built fuel tank capacity of minimum 8 hrs of continous running
capacity on full load . Erection, commissioning and satisfactory testing as per requirement with first filling of fuel (minimum
up to the 80% of fuel tank capacity), oil, etc. with guarantee / Warrantee of complete system for Two years. & with obtaining
all necessary certificate from Electrical Inspector. The Capacity and Ratings of DG sets are as below. (As per new CPCB4+
Emission norms Engine With - Turbo Charger, EGR (Exhaust Gas Recirculation), CRS (Common Rail Fuel System), DOC
(Diesel Oxidation Catalyst), SCR (Selective Catalytic Reduction), Integrated wiring harness connected to ECU .)
(S) Continuous rating of 320 KVA ,BHP not less than 375 BHP
may Be More Or In Figures
Providing & erecting approved make AMF control panel suitable for following size of 3 phase, 415 V., 50 cycles, A.C. diesel
generating set complete of scope as detailed below:
1) Power module: A pair of electromechanically interlocked contactors (for mains & generator) Overload relay for generator
contactor Neutral contactor for mains and generator Power socket for connections.
2) Control and metering module: Line voltage monitor. Generator voltage monitor Ammeter 3 items attempt start facility. Air
Two Lac Eighty Four
circuit breakers/MCB/MCCB of suitable rating for auto/manual operation. Auto/manual switch. Emergency stop push
Thousand Six Hundred Fifty
1.00 buttons. Manual start push button. frequency meter. Engine hour meter. Two earthing studs.
Rupees And Paise Thirty Two
3) Protection module: The engine shutdown in the unlikely event of Low lube oil pressure High cylinder head temperature. V
4) Indicators with alarm Load on generator.
5) Indicators Load on mains Engine fails to start . Emergency stop battery charger.
The AMF Panel of following capacity
(E) AMF Control Panel for 300 kVA/320 KVA3 phase DG Set
Design, Supplying, installing, testing of factory fabricated ready made Three phase APFC Panel Cubical Panel fabrication
should be type tested as per IEC 61921, 61439:1&2 Capacitor Duty Contactor for switching as per following Steps Incomer
Switch of MCCB type Icu=Ics=50KA at 400/440 Volts, with OC, SC, internal earth fault protection Incomer Switch of MCCB
type Icu=Ics=50KA at 400/440 Volts, with OC, SC, internal earth fault protection,Copper tinned insulated Busbar,Cubical Seven Lac Eighteen
panel should be indoor type with IP 43 and IK 10,Metalized polypropylene film tye3-phase 550Volt Capacitor,De tuning Thousand Nine Hundred
Reactor for each capacitor,Panel having Short Circuit and Overload protection,Each step Capacitor having suitable MCB with Eighty Five Rupees And Paise
Sc, OL, internal earth fault relay,Each stage having Stage Contactor (Capacitor load rating),PF regulator master controller Sixty Seven Only
having suitable steps with LCD display, Rs 485 Communication port, Indication LED Lamps for main incomer and ON-OFF for
each capacitor bank,MS Chanel for Floor mounting, Cable entry as per site situation,Cooling fans for panel
SITC of Vertical Air Termination Solid aluminium with Base- 10 mm dia and 1000 mm long. Air Termination Base tested for
Nine Thousand Four
conditioning, Ageing Test & Lightning impulse current withstand test: 100 kA of 10/350µs waveform in an accredited Third
1.00 9416.23 Hundred Sixteen Rupees And
party laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol with MAST 34mm dia 3000 mm long- Cold Galvanized
Paise Twenty Three Only
SITC of 8 mm dia solid Aluminium Conductor for roof top mesh grid and tested as per IEC 62561- 2 conducted in the Govt.
accredited thirty party laboratory to meet the requirement of IS/IEC 62305 with Required Accessories - Aluminium Holding
clamp at every 1 mtr distance, Aluminium/SS cross splicer at every crossing of Alu. conductor, Expansion piece with
Two Hundred Ninety Nine
connectors at every 20 mtr distance, Aluminium straight Splicer to connect conductors. All Accessories should be tested as
100.00 299.97 Rupees And Paise Ninety
per IEC 62561-1 2018 Cl. 6.3 for conditioning & Ageing Test & 6.4 for Lightning impulse current withstand test: 100 kA of
10/350µs waveform(Ageing & Electrical test ) conducted in a sequence manner & tested in the Govt. accredited Third party
laboratory to meet the requirements of IS/IEC
SITC of 14.2 mm dia 3 mtr long Earth electrode of High tensile steel electrode with 250 micron copper bonding & 1 bag of
Five Thousand Nine
Carbon fill Based environment friendly backfill tested as per IEC 62561-7 in NABL accredited Laboratory and suitable
2.00 5992.33 Hundred Ninety Two Rupees Per Set
stainless Steel double sided clamp. Eco Friendly rust proof heavy duty weather proof Polyethylene Earth Pit Chamber with
And Paise Thirty Three Only
following dimensions :254 mm dia (top), 330 mm dia (bottom) & 260 mm (height).
Providing and erecting water cooler having storage capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp of
Fifty Four Thousand Five
45˚ C. The outlet temp. of the water should drop by 15˚ C within a hour, The water cooler should be comprising of hermetically
3.00 54515.76 Hundred Fifteen Rupees And
sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating coil, thermostats, relay etc. complete
Paise Seventy Six Only
with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel.
may Be More Or In Figures
Supplying & erecting reverse osmosis (RO) water purification system with M.S. powder coated pedestal frame, prefilter
housing carbon filter suitable buster DC pump, auto low & high pressure switches with following size of LPH capacity &
Seventy Seven Thousand
erected as directed [D] 100 LPH with 1 phase / 3 phase Raw water pump of 500LPH @
Eight Hundred Ninety One
3.00 2.5kg/cm2 - (1N0 - Kirloskar /CRI/Lubi), Dual media filter 10"x54" - (1 No), Micron cartridge filter 20" x 2.5" ( 1No), High
Rupees And Paise Twenty
pressure pump 500LPH @ 10kg/cm2 - (1No - Shimge /CRI /Lubi), RO Membrane housing with RO membrane of 40*40 -
(1No), RO pressure tube 4" x 1E - ( 1No), 0 - 1200LPH Rotameter -(2 Nos), with Recovery Rate 50% .
Providing, Supplying, Installing, Testing and Commissioning of 200 LPH Reverse Osmosis (RO) Water Treatment Plant suitable
for a 4-Bed Haemodialysis Unit, comprising raw water feed pump, multimedia sand filter, activated carbon filter, water
softener with brine tank, micron cartridge filter, high-pressure pump, RO membrane assembly with pressure vessels, pressure One Lac Seventy Six
1.00 gauges, flow meters, conductivity/TDS meter, control panel, interconnecting piping, valves, fittings and necessary accessories, 176750.00 Thousand Seven Hundred
including suitable dialysis-grade water storage, distribution and disinfection arrangements, complete as per approved Fifty Rupees Only
technical specifications, applicable dialysis water quality standards and directions of the Engineer-in-Charge.
Providing, supplying, installing, testing and commissioning of 30 kVA capacity, three-phase, air-cooled, servo-controlled
automatic voltage stabilizer suitable for hospital electrical equipment and other sensitive electrical loads, complete with heavy-
duty servo motor, variable autotransformer, buck-boost transformer, electronic voltage sensing and control circuit, digital
input and output voltage indication, adjustable voltage correction mechanism, high/low voltage cut-off protection, overload
Eighty Four Thousand Seven
protection, short-circuit protection and thermal protection. The unit shall be complete with a suitably rated enclosure, internal
1.00 84769.30 Hundred Sixty Nine Rupees
wiring, terminal connections, necessary accessories, earthing connections and all other components required for proper
And Paise Thirty Only
operation. The stabilizer shall conform to relevant applicable IS/IEC standards and approved manufacturer's specifications,
with the required input voltage range, output voltage regulation, phase configuration and protection features as approved by
the Engineer-in-Charge. The complete installation shall be carried out and commissioned as directed by the Engineer-in-
(a) General Features & Special Features of the all lift items shall be taken as below.
(b) for Handicap Lifts, Minimum 10 Passengers Lift Capacity shall be considered.same is to be informed to architect /civil
authority to keep necessary size of lift well.
(c) The lifts of 15/ 16 and above passenger capacity shall be taken for Hospital Lifts; Where in Description “ Stretcher Lifts”
shall be mentioned.
(d) The Rates of the following items are for the lift of Machine room less. For Machine room Lifts, rate for Rs. 1,50,000/- shall
be deducted in Total Cost for the Lifts from 4 to 13 Passenger Lift. Rs. 2,00,000/- shall be deducted in Total Cost for the Lifts
15 and above passenger capacity as extra cost.
(e) Add Rs. 80,000/- for the DUPLEX control for the lifts up to 10 floors and add Rs. 10,000/- for additional each floor above
(A) GENERAL DESCRIPTION OF LIFTS.
[1] GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque Lift 3 phase 440 V A. C. Permanent Magnet
Synchronous motor of proper rating with high efficiency shall be used.
[2] Micro processor based / PLC, ACVVVF, vector control drive with encoder feedback closed loop system shall be used for lift
car and door operation which shall be full collective selective operation hall call demand response, UP/DOWN hall stops, Main,
Up/ Down Contactor with overload and phase reversal relay and safety controls.
[3] Car with M S platform with bracings of adequate size and to sustain the impact load cabin + passenger with safety factor of
fire for steel and side panels of Stainless steel of sheet of grade 304 duty. Car ceiling will be S.S. finishes with aesthetic
appearance with LED ceiling lights. Car flooring shall be of s/s 304 chaker plate design sugeested of engineer in charge. of
engineer in charge. Car doors shall be of stainless steel grade 304, hairline finish with centre opening / telescopic automatic
doors. Car panel will also be S.S. 304 finished with emergency stop device, mechanical door safety device, facility of auto/
attended mode. All car panel buttons and all floor switches must be with brail language as per lift act.
may Be More Or In Figures
[4] All landing doors must be fire rated for 2 hour shall be fully automatic centre opening/ telescopic opening made of hairline
finish steel grade of 304 with key holes and infrared curtains with Unlocking facility from outside
[5] Appropriate battery operated emergency light in the car along with alarm switch shall be provided. Also, Emergency Light &
Fan should start immediately without any Time Delay as soon as power fails.
[6] Digital scrolling indicator system for up-down arrow along with floor position indicator shall be provided inside the car and
[7] Full height infra red curtain with multiple cross / crossing light beams shall be provided.
[8] Automatic Rescue Device (ARD) shall be provided accordingly of passenger capacity with Manual Rescue Operation (
Manual Cranking Facility).
[9] Audio visual indication in the lift car showing over loading shall be provided such that doors kept open till excess load is
[10] Spring buffers/PU Buffers shall be provided.
[11] Car fan as per passenger capacity with automatic sleep timer shall be provided.
[12] Voice annunciator with suitable music shall be provided in lift car.
[13] Self diagnostics system for operational and safety parameters shall be provided in control panel.
[14] Mechanical over speed governor with governor calibration as per actual site parameters and submission of calibration
certificate submission, door key holes in the floor doors, fireman switch shall be provided.
[15] Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift pit should be provided by the lift
agency, along with the other steel structure works, foundations for the machine etc…
[16] In the hoist way fascia plate shall be provided without any extra cost, where ever required as / if directed by engineer in
[17] Permanent wiring with necessary safety devices like RCCB in all circuit, Over Voltage Under Voltage protection and THD
eliminator in circuit for lift machine room and lift well with proper numbers of light points, with fixtures, exhaust fan and
plug points shall be provided by the agency. Only 3 phase Power Supply shall be made available by department in lift
machine room. Necessary Earthing as per Lift Act/Rules shall be arranged by Lift Agency.
[18] Any civil/ electrical works for additional and alteration in lift shaft and machine room related to erection of lift shall be
made by lift agency without any extra cost. (granite/marble fixing around all landing door openings are not in lift agency’s
[19] Agency has to provide all working drawings and documents and liaison services for obtaining all necessary permission
from lift inspector and other authorities.
[20] acrylic transparent licence/display A4 size holder in lift car
[20A] As per statutory requirement of Govt. Of Gujarat lift & escalator act 2000, lift agency has to provide
1. Car top safety barricade
2. Push & talk communication system.
3. Fireman's switch operation at Ground Floor. 4.carrying out third party lift
inspection during/after lift erection and provide report by third party authorized by concern licensing authority 5.agency
has to provide third party insurance upto completion of free maintenance period and submit the document for the same.
[21] Car Panel Operating Buttons with floor position indicator/buttons must be of Auto Glow type clearly visible when view
from inside cabin.
[22] For Physically Handicapped person Full Length Handrails of hairline finish steel grade of 304 should be provided at
appropriate height on the Rear & Side Wall Panels in Lift Car.
[23] With Necessary KVA rating voltage controlled Stabilizer suitable for your controller, drive and all equipments of lift.
[24] Necessary rating of DP Elcb and FP Elcb required for lift is in scope of work which rating is sugested by CEICED
Department (electrical Inspector)
(B) SPECIAL FEATURES DESCRIPTION OF LIFTS for PREMIUM category
may Be More Or In Figures
1. Advanced control system dual 64 bit embedded microprocessor with CANBUS Serial Communication mode including
Regenerative power efficient operation,on site programming facility, Anti nuisance, Pte-opening, BMS/RMS with necessary
online real time monitoring system having necessary connectivity for remote monitoring & other suitable supporting hardware
& software devices to fulfil the purpose.
2. Floor Indication LCD Display with call registration & brail mark with arrival gong and hall lantern & TFT Screen in the car
with MP3 Voice Announcer.
3. CAR Panel should be Scratch resistive SS Moonrock finish / Hair Line / Honeycomb for car and all Doors, All landing
doors must have fire rating up to 2 hours and car door must have multi-level crisscross beam door protection.
4. To & fro communication system & wiring (i.e. car , control room & guard room ) and Each elevator are equipped with remote
monitoring system.agency has to provide mobile app and user id and password for monitoring
20 passengers . Ground plus 3 upper floors with Rated Speed of 1.0 m/sec with micro price/PLC control and ACVVVF. drive
Twenty One Lac Twenty
(C) With General PLUS ADDITIONAL SPECIAL FEATURES attached herewith. Prem. Cat.
Three Thousand Nine
Hundred Thirty Three Rupees
And Paise Four Only
15/16 Passengers, Ground plus 3 upper floor with Rated Speed of 1.0 m/sec.,
(C) With General PLUS ADDITIONAL SPECIAL FEATURES attached herewith. Prem. Cat. Twenty Lac Twenty Three
Thousand Ninety Four
Rupees And Paise Sixty Four
Providing & erecting approved make overload non-start feature & overload warning Indicator system in the lift with making
use of sound isolated floating platform & micro switches on SI frame to get sensation of live load inside lift cage at any given
Thirty Two Thousand Five
moment, with provides new fixtures of overload warning inside lift cage with new relay in the existing control panel to activate
1.00 32527.05 Hundred Twenty Seven
‘Overload Non-Start Function with carrying out additional wiring including laying of new travelling cable, include minor civil
Rupees And Paise Five Only
work & without changing the existing capacity speed stops, travel & operation of the desired lift
Providing and fixing printed instruction chart both in English and Gujarati and duly framed with front glasses, for treatment
One Hundred Thirty Rupees
1.00 of person suffering from Electric shock with minimum 50" diagonally size.
And Paise Twenty Nine Only
Providing pair of rubber hand gloves suitable for working on 11 KV/22 KV supply.
Two Hundred Fourteen
Rupees And Paise Twelve Only
Supplying rubber matting of following thickness as per IS:15652/IEC 61111 One Thousand Twenty Seven
10.00 (b)4mm 1027.17 Rupees And Paise Seventeen Sq.Mtr
Supplying stand first AID box with antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, Two Hundred Ninety Nine
2.00 medicated ready to use bandage (Band-aid) adhesive tape for medicinal user, Scissors, anti-septic solution (Savlon or similar) 299.97 Rupees And Paise Ninety
etc. (All above contents shall be of standard makes) Seven Only
Supplying FIRE bucket round bottom of 9 litres capacity made out of 24 gauge G.I. sheet with extra handle at bottom duly
Two Hundred Fourteen
8.00 painted white inside and Red out side with FIRE mark, filled with dry-sand and kept on existing stand provided or hung on
Rupees And Paise Twelve Only
Wall hook 22 to 25 cms. projection for keeping fire buckets made out of 15 mm dia. M.S rod grouted in wall to a depth of Sixty Rupees And Paise Sixty
minimum 15 cms. Only
SITC of ABS back box Two Hundred Ninety Four
272.00 [Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] 294.92 Rupees And Paise Ninety Two
may Be More Or In Figures
SITC of Face Plate - Single (Keystone Jack,square)
Ninety Rupees And Paise
272.00 [Approved by Competent Authority
i.e. not Below the rank of Executive Engineer ]
Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling
erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in Thirty Three Rupees And
approved manner as directed Paise Thirty Three Only
SITC of CAT6 UTP 23AWG Solid: Per Meter
Forty Three Rupees And
9676.00 [Approved by Competent Authority i.e. not
Paise Forty Three Only
Below the rank of Executive Engineer
Supply, installation, testing, and commissioning (SITC) of a 24U, 19-inch standard floor-mount rack. The rack must be made
of mild steel with a powder-coated finish and include lockable front and rear doors (front door typically glass or perforated, Forty Thousand Four
rear door perforated), lockable and removable side panels, and a welded frame construction for stability. Hundred Rupees Only
Supply, Installation, Testing, and Commissioning (SITC) oF 1U horizontal cable manager for a 19-inch rack, made of powder-
coated steel with a black finish. The manager shall feature multiple D-rings, typically 5 to 7, to provide organized routing and Two Hundred Eighty Two
support for patch cables. The design should facilitate easy moves, adds, and changes while maintaining proper cable bend Rupees And Paise Eighty Only
radius. Includes all necessary M6 cage nuts and screws for mounting.
SITC of PIGTAIL LC SM SIMPLEX LENGTH- 1m Seven Hundred Seventy Nine
30.00 [Approved by Competent Authority i.e. 779.72 Rupees And Paise Seventy
not Below the rank of Executive Engineer ] Two Only
SITC of Patch Panel Cat 6 UTP Keystone Type- 24 Port-Fully Loaded Four Thousand Four
20.00 [Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] 4400.57 Hundred Rupees And Paise
Fifty Seven Only
Supply, installation, and commissioning of a 48-Port 10/100/1000 Mbps Layer 2 Managed Gigabit Switch with 2 SFP uplink
ports, suitable for standard 19” rack mounting. The switch shall support VLAN, QoS, STP/RSTP/MSTP, SNMP, and have a
Twenty Two Thousand Sixty
minimum switching capacity of 56 Gbps. It must include all necessary accessories (mounting kit, power cord, etc.), be
6.00 22068.50 Eight Rupees And Paise Fifty
UL/CE/FCC Class A certified, and have an internal power supply. Scope includes delivery, rack installation, configuration,
testing, and documentation. Minimum 3-year OEM warranty required.
SITC of PATCH CORD LC-LC SM DUPLEX LENGTH- 3m One Thousand Nine
30.00 [Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] 1901.83 Hundred One Rupees And
Paise Eighty Three Only
Supply, installation, and configuration of a compact firewall device suitable for securing the network. The firewall shall provide
essential security features including stateful packet inspection, basic intrusion prevention, URL filtering, and VPN support for
secure remote access. It must efficiently handle the expected network traffic without impacting performance and support Eighty Five Thousand Two
1.00 multiple user profiles and security zones. The scope includes delivery, physical installation, integration with existing network 85244.00 Hundred Forty Four Rupees
infrastructure, configuration according to library security policies, testing, and commissioning. Training for basic operation Only
and administration shall be provided. The device shall come with a minimum one-year warranty and technical support from
Supply, installation, testing, and commissioning of complete Wi-Fi system including wireless access points (indoor/outdoor as
specified), wireless controllers, network switches, structured cabling, mounting accessories, PoE injectors or PoE switches as
required, configuration, integration with existing LAN infrastructure, and provisioning for seamless wireless connectivity
throughout the designated area. The system shall support the latest Wi-Fi standards (minimum Wi-Fi 6 / 802.11ax), ensure
Sixty Thousand Six Hundred
7.00 high-speed internet access, robust security protocols (WPA3), centralized management, load balancing, roaming capabilities,
and scalability for future expansion. All equipment shall be from approved makes, compliant with relevant industry standards,
and installed as per manufacturer’s guidelines and project specifications. The scope includes necessary civil and electrical
works, testing, labeling, documentation, and training to client personnel, complete in all respects.
may Be More Or In Figures
Supply, delivery, installation, testing, and commissioning of a new 40‑inch LED/Smart TV for library or display use. The TV
should have a minimum native resolution of Full HD (1920×1080), with built‑in smart functionality (or compatibility with
external streaming devices), at least 2 HDMI ports, USB port(s), and standard audio output connectivity. It should come with a
Thirty Five Thousand Three
3.00 table stand or wall mounting bracket (as required) along with remote, power cable, user manual, and warranty card (minimum
Hundred Fifty Rupees Only
1 year). The supplier shall mount or place the TV at the designated location, ensure it works (inputs, network, picture quality),
carry out necessary cable routing (power, HDMI etc.), and hand over in fully operational condition with demonstration to staff.
Supply, installation, testing, and commissioning of a 5 MP STQC-certified dome‑type IP CCTV camera with vandal‑proof metal
Thirteen Thousand Six
housing, secure firmware, encrypted video transmission, and compliance with MeitY Essential Requirements; to be fully
67.00 13635.00 Hundred Thirty Five Rupees
integrated, configured, and commissioned as a complete, operable surveillance unit in accordance with the contract
Supply, installation, testing, and commissioning of a 5 MP STQC-certified bullet‑type IP CCTV camera with vandal‑proof metal
housing, secure firmware, encrypted video transmission, and compliance with MeitY Essential Requirements; to be fully Fifteen Thousand One
integrated, configured, and commissioned as a complete, operable surveillance unit per contract specifications. Hundred Fifty Rupees Only
Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling
erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in Thirty Three Rupees And
approved manner as directed Paise Thirty Three Only
SITC of CAT6 UTP 23AWG Solid: Per Meter
Forty Three Rupees And
2615.00 [Approved by Competent Authority i.e. not
Paise Forty Three Only
Below the rank of Executive Engineer
SITC of Patch Panel Cat 6 UTP Keystone Type- 24 Port-Fully Loaded Four Thousand Four
4.00 [Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] 4400.57 Hundred Rupees And Paise
Fifty Seven Only
SITC of PIGTAIL LC SM SIMPLEX LENGTH- 1m Seven Hundred Seventy Nine
10.00 [Approved by Competent Authority i.e. 779.72 Rupees And Paise Seventy
not Below the rank of Executive Engineer ] Two Only
SITC of 8 x 10/100/1000BASE-T PoE ports
2 x Gigabit SFP ports
Advanced L2 switching and security features
Eighteen Thousand Four
L2+ Static Routing
1.00 18400.18 Hundred Rupees And Paise
Optional “standard mode” or “surveillance mode” management user interface
[Approved by Competent Authority i.e. not Below the rank of Executive
SITC of 24 x 10/100/1000BASE-T PoE ports 4 x Gigabit RJ45/SFP Combo ports Advanced L2 switching and security features
L2+ Static Routing Optional “standard mode” or “surveillance mode” management user interface 193 W PoE budget Thirty One Thousand Nine
3.00 31996.80 Hundred Ninety Six Rupees
[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] And Paise Eighty Only
Supply and installation of a 32-channel Network Video Recorder (NVR) with support for up to 8 SATA hard drives and capable
of handling video input resolutions up to 12MP for both live preview and playback. The NVR shall support H.264/H.265 video
compression, provide simultaneous multi-channel recording and playback, and feature user-friendly interface for remote Fifty Thousand Seven
monitoring via web and mobile apps. It must include advanced functionalities such as motion detection, alarm management, Hundred Two Rupees Only
and network redundancy options. The unit shall support PoE ports (if applicable) and be compatible with standard IP cameras.
may Be More Or In Figures
Supply and installation of 6TB Surveillance-grade Hard Disk Drive (HDD) suitable for continuous 24x7 operation in
CCTV/DVR/NVR systems. The HDD shall be specifically designed for video surveillance applications with enhanced reliability,
Fifteen Thousand Eight
high write endurance, and optimized for multiple HD video stream recording. It must support SATA III interface (6 Gbps), have
2.00 15806.50 Hundred Six Rupees And
a minimum spindle speed of 5400 RPM or higher, and include vibration resistance and thermal management features. Scope
Paise Fifty Only
includes delivery, integration with existing recording system (DVR/NVR), formatting, testing, and ensuring proper recording
functionality. HDD must be from a reputed brand
Supplying and erecting ceiling speaker with rated power of 6 watt/power tapping 30/15/7.5 watt available,opening angle
degree H * 77 degree V ,sound pressure level 88 dB ,frequency response of 70Hz to 20KHz One Thousand Two Hundred
[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] Twelve Rupees Only
SITC of 8 Zone Standaone Voice Alarm controller 19” 2U rack mount type with Built in Media Player with USB (MP3/
One Lac Eleven Thousand
1.00 WAV/FLAC), Bluetooth V5.0, FM Radio functions, SD CARD , Pre-recorded Evacuation messages and fire alarm integration
One Hundred Rupees Only
Supply and installation of a Voice Alarm Call Station designed for emergency communication and public address in safety and
security systems. The call station shall support clear two-way voice communication, with built-in microphone and speaker,
and include features such as call initiation, emergency signaling, and integration capability with existing voice alarm or public Forty Two Thousand Five
1.00 address systems. It should be rugged, wall-mountable, and compliant with relevant safety standards. Scope includes delivery, 42561.40 Hundred Sixty One Rupees
installation, wiring, integration with the alarm control system, functional testing, and commissioning. The product must carry And Paise Forty Only
a minimum one-year OEM warranty.
SITC of Power amplifier, 240W [Approved by Competent Nineteen Thousand Twenty
2.00 Authority i.e. not Below the rank of Executive Engineer ] 19029.41 Nine Rupees And Paise Forty
Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling
erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in Thirty Three Rupees And
approved manner as directed Paise Thirty Three Only
Supply, Installation, Testing, and Commissioning (SITC) of: High-quality, low-impedance, 2-core, 1.5 sqmm speaker cable for
the connection of loudspeakers to the voice alarm amplifier/controller. The cable must be suitable for both normal public Twenty Two Rupees And
address and emergency voice alarm applications, ensuring clear and reliable audio signal transmission Paise Twenty Two Only
Supply & Installation Fire Alarm Panel Addressable Type with Two Loop & With battary Backup One Lac Three Thousand
One Hundred Fifty Six
Rupees And Paise Thirty Five
may Be More Or In Figures
Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with Two Thousand Five Hundred
158.00 mounting base complete as required. 2555.30 Fifty Five Rupees And Paise
Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic
One Thousand Three
cover complete with all connections etc as required.
40.00 1388.75 Hundred Eighty Eight Rupees
And Paise Seventy Five Only
Supplying, installation, testing & commissioning of addressable manual call point complete as required.
Three Thousand Eight
6.00 3832.95 Hundred Thirty Two Rupees
And Paise Ninety Five Only
Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.
Two Thousand Seven
6.00 2777.50 Hundred Seventy Seven
Rupees And Paise Fifty Only
Supply & Installation Signal Module
Two Thousand Four
6.00 2444.20 Hundred Forty Four Rupees
And Paise Twenty Only
Supply & Installation Isolator Module
Two Thousand One Hundred
6.00 2177.56 Seventy Seven Rupees And
Paise Fifty Six Only
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE Ninety Nine Rupees And
insulation, steel wire armouring & FRLS/HFFR outer sheath complete as required Paise Ninety Nine Only
EPBX SYSTEM Two Hundred Ninety Four
25.00 SITC of ABS back box 294.92 Rupees And Paise Ninety Two
[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ] Only
SITC of Face Plate - Single (Keystone Jack,square)
Ninety Rupees And Paise
25.00 [Approved by Competent Authority
i.e. not Below the rank of Executive Engineer ]
SITC of Digital/ PCM/ TDM EPABX System having SMT design, system with flexible universal slots. Inbuilt
Auto attendant facility, Minimum 150 Nos. conference, Analog extension line, Calling GSM, E&M line, PRI/ EI
& VOIP program me through Analog telephone digital key from Ethernet, public address cord, shall have unrestricted
simultaneous dialing facility, QSIG protocol on PRI, 95/ STD/ ISD/ Local-Locking, Class of Service, Quick Dial-
Single Digit dialing of any two external number, Once only ring device, Chairman/ Secretary - Do not disturb
Facility, Power Down Mode, Hot Line, Hot Outward Dialing, Day Night Mode, Auto Call Back, Barge-in, Call Pick Seventy Seven Thousand
1.00 Up,& Call Transfer, Call transfer while Ringing with Voice Guide System, (DISA), Caller ID (CLI), CLI Base ECF, 77077.14 Seventy Seven Rupees And
CLI Base routing Internet Ready Port, External Music Port, Call Budgeting, Call Most Calculation (ASMDR), DID Paise Fourteen Only
Direct Inverse Dialing, External Music Input, Fax Homing, Global Directory Printing with following capacities
[Approved by Competent Authority i.e. not Below the rank of Executive Engineer ]
[C] No of Extension 48, No of Junctions 9, 8 Port IP Resource in-built, 4 Port Web base Video Conferencing, No of expandable
ports : 128, Operators Console - 01 Compatible : ISDN
may Be More Or In Figures
Providing & erecting main Distribution (MDF) indoor type, back mounted frame as per DoT standard approved with krone
Three Thousand Four
strips (d) Suitable for 100 pair
1.00 3443.09 Hundred Forty Three Rupees
And Paise Nine Only
Supplying & erecting push button type telephone instrument having speaker phone Caller ID & speaker phone with one touch
Eight Hundred Ninety Eight
25.00 memory (min.6 nos.)& 99 memories with display system Single line [[Approved by Competent Authority i.e. not Below the
Rupees And Paise Ninety Only
rank of Executive Engineer ]
Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling
erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in Thirty Three Rupees And
approved manner as directed Paise Thirty Three Only
may Be More Or In Figures
SITC of CAT6 UTP 23AWG Solid: Per Meter
[Approved by Competent Authority i.e. not Forty Three Rupees And
Below the rank of Executive Engineer Paise Forty Three Only
Providing, supplying, installing, testing and commissioning of a complete wired Nurse Calling System for the Intensive Care
Unit (ICU), comprising bedside nurse call units with call and reset/cancel buttons, illuminated call confirmation indicators,
patient call handset with flexible connecting cord, Code Blue/emergency call facility, nurse station master controller with
LCD/LED display for bed-wise call identification, corridor annunciator display, power supply unit, necessary
controller/interface modules, ELV cabling, conduits, junction boxes, connectors, termination accessories and all other
components required for a fully functional system.
The system shall provide audible and visual indication of incoming calls, identification of the calling bed, call
acknowledgement and cancellation/reset facility. Emergency calls shall be distinctly indicated at the designated nurse station.
Twenty One Thousand Seven
5.00 All equipment shall be compatible with one another and supplied as a complete integrated system, including configuration,
Hundred Fifteen Rupees Only
programming, installation, testing, commissioning and demonstration to the satisfaction of the Engineer-in-Charge, as per
approved drawings, manufacturer's specifications and applicable standards.
Providing and erecting approved make split air-conditioning unit consisting of copper condensing unit with fan motor,
hermetically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower
motor with its accessories by means of extra supplied proper insulated copper tubing,drain PVC pipes suitable for ( cost
includes powder coated Stand, Eco Friendly green gas charging, 15A plug top & Remote Control) with necessary core cutting.
(1)For ISEER Range (KWH/KWH)(3.1 to 3.99) Premium Category
may Be More Or In Figures
(b) for 1.5 ton capacity
Fifty Seven Thousand Six
1.00 57686.15 Hundred Eighty Six Rupees
And Paise Fifteen Only
Providing and erecting Inverter based approved make split air-conditioning unit consisting of condensing unit with variable
speed fan motor, inverter type hermetically sealed rotary compressor with accessories etc. duly connected separately erected
evaporating unit and blower motor with its accessories by means of extra supplied proper insulated copper tubing,drain PVC
pipes suitable for ( cost includes Eco Friendly green gas charging and 15A plug top & Remote Control & MS Stand) with
necessary core cutting.
(1)For ISEER Range (KWH/KWH)(3.1 to 3.99)
(B) for 1.5 ton capacity - Premium Cat. Fifty Three Thousand Eighty
5.00 53083.58 Three Rupees And Paise Fifty
(C) for 1.7 to 2 ton capacity - Premium Cat.
Sixty One Thousand Nine
1.00 61989.76 Hundred Eighty Nine Rupees
And Paise Seventy Six Only
Providing and erecting approved make Cassette type split air-conditioning unit consisting of condensing unit with fan motor,
hermetically sealed scroll/rotary compressor with accessories etc. duly connected separately erected evaporating unit and
blower motor with its accessories by Eco friendly Green gas charging & Internal copper wiring & Remote control ( 3 star and
above of current year) with necessary core cutting.
(D) for 3 ton capacity- 1/3Phase
One Lac One Thousand Nine
1.00 101922.13 Hundred Twenty Two Rupees
And Paise Thirteen Only
Providing and erecting Inverter based approved make Cassette type split air-conditioning unit consisting of condensing unit
with fan motor, hermetically sealed scroll/rotary compressor with accessories etc. duly connected separately erected
evaporating unit and blower motor with its accessories by Eco friendly Green gas charging & Internal copper wiring & Remote
control ( 3 star and above of current year) with necessary core cutting.
(B) for 2 ton capacity
Eighty Eight Thousand Eight
1.00 88804.25 Hundred Four Rupees And
Paise Twenty Five Only
(C) for 3 ton capacity- 1/3Phase
One Lac Forty Five Thousand
2.00 145049.13 Forty Nine Rupees And Paise
(D) for 4 ton capacity- 1/3Phase One Lac Seventy Seven
Thousand Three Hundred
Thirty Six Rupees And Paise
Eighty One Only
Supplying & installing MS standard type stand mounting for outdoor unit of Split A.C. up to 4 TR capacity erected with Seven Hundred Forty Six
13.00 necessary hardware materials as directed. 746.39 Rupees And Paise Thirty Nine
Supplying and erecting insulated pair of soft copper tubing open or concealed including power and control cable,necessary
One Thousand One Hundred
PVC drain pipes for Split/Cassette AC machine up to 4 TR capacity
92.00 1158.47 Fifty Eight Rupees And Paise
Forty Seven Only
Supplying and installing MS angle , powder coated / Painted standard type of wall/floor stand mount for outdoor unit of split
AC of following capacity, erected with necessary hardware materials as directed.
may Be More Or In Figures
(A) 25mm*25mm*3mm thick M.S angle suitable for up to 2 TR. Capacity of ac machine One Thousand Three
6.00 1318.05 Hundred Eighteen Rupees
And Paise Five Only
(B) 35mm*35mm*5mm thick M.S angle suitable for above 2 TR to 4 TR Capacity of ac machine One Thousand Five Hundred
7.00 1510.96 Ten Rupees And Paise Ninety
Supply, Installation, Testing and commissioning of factory built floor mounted double skin type horizontal/vertical air
handling units SITC of Double Skin Hygienic AHU: Modular construction for ICU/Critical
areas. Includes:
• Casing: 45mm-50mm thick PUF insulation (40 kg/m³) with thermal break profiles and SS 304 inner skin for hygiene.
• Fan Section: High-efficiency plug fan or backward-curved centrifugal fan with EC/IE3 motor suitable for VFD.
• Filter Sections: 3-stage filtration (G4 Pre-filter + F7/F9 Fine filter ).
• Cooling Coil: 6-8 row deep copper tube with aluminum fins, SS-304 insulated drain pan.
• Special Features: Marine light, view port, UVGI germicidal lamps, and pressure monitoring ports. Three Lac Forty Two
2 DX Coil with 6-8 342390.00 Thousand Three Hundred
rows deep, copper tubes, and aluminum fins. Hydrophilic blue fins are preferred for anti-corrosion; 2-core x 1.5 sq.mm Ninety Rupees Only
shielded communication cable in PVC/GI conduits between ODU and IDU.
Humidity Control Section (RH Control)
Dehumidification: 6-8 row deep cooling coil (standard for moisture removal) with copper tubes and blue-coated aluminum fins.
Reheat Coil: Electric heater banks or hot water reheat coils interlocked with the fan to maintain 40–60% RH without
overcooling the space.
Humidification (Dry Climates): Steam-type humidifier section (if required by local climate) with a dedicated distribution
Sensors: Duct-mounted and room-type RH + Temperature sensors integrated with the BMS/PLC for real-time modulation.(2-
Providing and installing RCC foundation block 300×300×300 mm for AHU support on slab, including reinforcement,
Four Hundred Fifty Four
8.00 shuttering, MS angle support frame, vibration isolation mounts, anchor fasteners and all necessary accessories, complete.”
Rupees And Paise Fifty Only
Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting
One Thousand Three
complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and
190.00 1308.96 Hundred Eight Rupees And Sq. Mtr.
specifications of following sheet thickness complete as required. 8.11.1-(A) Thickness 0.63 mm sheet (22 Gauge)
Paise Ninety Six Only
Supply, installation, testing and commissioning of Motorized (ON-OFF Type) duct mounted GI volume control damper with
Nine Thousand Eight
enthalpy sensor and necessary control wire (minimum 1.5 sq-mm) for integration within AHU room. 8.11.4-(A) Damper
1.00 9836.39 Hundred Thirty Six Rupees Sq. Mtr.
And Paise Thirty Nine Only
Supply, installation, testing and commissioning of Motorized (ON-OFF Type) duct mounted GI volume control damper with Nine Thousand Eight
4.00 enthalpy sensor and necessary control wire (minimum 1.5 sq-mm) for integration within AHU room. 8.11.4-(B) Actuator 9846.49 Hundred Forty Six Rupees
And Paise Forty Nine Only
Supplying, installing & commissioning approved make Laminar
(a) Compact & Slick Design(b) Perforated Grill/CG screens to protect HEPA Filters (c) PUF insulated Wall & Ceiling Panels (d)
PUF insulated Doors (e) poxy/Vynil Floors (f) Available with Stainless Steel/PCGI (g) Positive pressure in OT ensures no entry Three Lac Seventy Eight
2.00 for outside contaminated air (h) Class 100/ISO 5 at grill level as per NABH guidelines (i) Temperature 21Dec C as per NABH 378750.00 Thousand Seven Hundred
guidelines (j) Humidity 40-60% (k) Positive pressure minimum 15 pascals (l) Air changes minimum 20 Air changes per hour Fifty Rupees Only
(m) Following NABH guidlines for testing and calibration and traceability as per NABH standards (A) 1970mm x 2350mm
Supplying, fixing testing commissioning of Riser of powder coated aluminium without volume control dampers with anti
One Thousand Five Hundred
0.80 smudge ring & removable core and size & shape as per site requirement and approved design. 1515.00 Sq. Mtr.
Fifteen Rupees Only
Providing and fixing acoustic insulation to AHU ducting, including all necessary materials, adhesive, fixing and finishing: One Thousand Four
40.00 Supply duct – 6 m length and Return duct – 4 m length from AHU connection, complete as per specification and site 1466.52 Hundred Sixty Six Rupees Sq. Mtr.
requirement. And Paise Fifty Two Only
may Be More Or In Figures
Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber
(Class "O") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with Eight Hundred Seventy
120.00 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required. 877.69 Seven Rupees And Paise Sixty Sq. Mtr.
8.11.13-(A) 19mm Nine Only
8.11.13-(B) 25mm One Thousand One Hundred
70.00 1102.92 Two Rupees And Paise Ninety Sq. Mtr.
Electric Motor Driven Hydrant Pump
Supplying,Installing, testing and commissioning of Fire authority approved Electrical driven fire pump suitable for automatic/
manual operation consisting of the following-Rates for erection of pump only Horizontal split casing, high pressure, single/
multistage centrifugal type fire pump having cast iron body, bronze impeller,stainless steel shaft & capable of delivering
LPM against a total head of 40Mtr while running at 2900 RPM complete with proper connection to suction and delivery line,
and including bypass arrangement for testing of pumps as per the requirement. Suitable mechanical seal with mounting
aggangement shall be included, having a name plate indicating suction, delivery, head, discharge, stages, RPM and direction
of rotation. Y Stainers at pump input shall be provided as per manufacturer requirements. Pump shall be capable of One Lac Thirty Six Thousand
1.00 furnishing not less than 150% of rated capacity at a head not less than 65 % of rated head. The shut off head shall not exceed 136350.00 Three Hundred Fifty Rupees
120% of rated head. Squirrel cage, induction motor, TEFC type suitable for 415 + 10% V, 3 phase, 50 Hz, AC supply, of Only
suitable HP rating for the above pump with synchronous speed of 2900 RPM conforming to IP 55 protection & class 'F'
insulation. The motor shall conform to IS 325 1978 (up to date) with flexible coupling and coupling guard . Factory Fabricated
Common base plate for mounting pump and motor fabricated of mild steel channel as per manufacturer's recommendation
with heavy duty Anti Vibration pads (4 Nos., heavy duty). Grouting bolts to be provided and installed by vendor at his cost
Flexible Coupling and coupling guard for direct coupling of pump and motor. Drain Pipe with Valve Main Fire Pump
Discharge : 1280 LPM Pumping Head : 40 M Pump Size : 30 HP Rate should included interconnection cables and Cable box
if reqd for cable conn. to motor.
Electrical Motor Driven Jockey Pump
Supplying,Installing, testing & commissioning of fire authority approved electrically driven Jockey pump suitable for
automatic/manual operation consisting of the following: Horizontal / Vertical mounted multistage jockey pump having cast
iron body, S.S. impeller, stainless shaft with mechanical seal capable of delivering 180 LPM against total head of 40Mtr while
running at 2900 RPM complete. The system shall be complete with necessary pressure gauge with gun metal shut off cock on
delivery side including bypass arrangement for testing of working of the pumping set as required. The pump should meet the
requirement of IS 15105:2002 and must be approved by the local fire authority. Y-Stainers at pump input shall be provided as
per manufacturer requirements. Squirrel cage induction motor suitable for 415 + 10% V, 3 phase, 50 Hz, AC supply of suitable Seventy Five Thousand
1.00 HP rating for the above pump with synchronous speed of 2900 RPM T.E.F.C type connected to pump with flexible coupling 75750.00 Seven Hundred Fifty Rupees
and coupling guard . Factory fabricated Common base plate for mounting pump and motor fabricated of mild steel channel as Only
per manufacturer's recommendation with heavy duty 4 Nos. Anti Vibration pads.(Cushy foot) . grouting bolts to be provided
and installed by the vendor at his cost Suitable reinforced cement concrete pump foundations as per manufacturer's design
including foundation bolts, washers as required.
Drain pipe with valve (25 mm dia) Jockey Pump :- Discharge : 180 LPM
Pumping Head : 40 MTR Pump Size : 10 HP Rate shall include inter connecting cables and cable box if reqd for cable conn to
may Be More Or In Figures
Diesel Fire Pump
Supplying, Installation, Testing and commissioning of Diesel engine driven fire pump suitable for automatic operation and
consisting of following: Horizontal type, centrifugal End Suction pump of cast iron body & bronze impeller , mechanical seal to
ensure a minimum pressure of 3.5 kg / sq.cm. at highest and farthest outlet at specified flow of 137 m3/Hour@ 40M. head
Three Lac Forty Eight
conforming to IS 1520. with M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.
1.00 348450.00 Thousand Four Hundred Fifty
Diesel Fire Pump
Discharge : 1280 LPM
Pumping Head : 40 M
Pump Size : 30 HP
Fire pump panel (Combined for All Pumps) and electrical works - Starter panel with star delta or as per CFO approved starters
rated to suite pump HP with necessary protection feautres like SPP / ELR / OL / SC / phase and on off indicating lamps. The
busbars shall be of Al - 0.8 A / sq mm size. Panel shall be fabricated from 14G sheet steel with seven tank process powder
coated and shall be min IP 52. Panel shall have Ammeter / Voltmeter and KWh meter. Cabling / earthing from panel to pump
shall be scope of vendor without any extra cost. Cabling - supply / laying and terminating, shall be Al XLPE armoured / Cu
Two Lac Twenty Two
XLPE armoured / as per manufacturers specifications with necessary terminal box to terminate the cables. Panel shall be
1.00 222200.00 Thousand Two Hundred
rated min for 25KA fault level. Cable trays - hot dip GI ladder type 16 gauge with required supports shall be used for cabling.
Panel shall have one incomer MCCB / ACB of required rating where by incoming supply and earthing shall be terminated by
electrical contractor.Starters shall be suitable for respective motors.panel to take inputs from pressure switch/on-off switch .
Flow switch wiring shall be in suitable mms pvc consuits. Panel should be manufactured by CPRI approved panel builder
Supply, Installation, testing and commissioning of CAST IRON Y-TYPE STRAINER (flanged) PN-1.6 ; body - C.I., Screen
Fifteen Thousand Three
stainless steel a.150 mm dia
3.00 15326.75 Hundred Twenty Six Rupees
And Paise Seventy Five Only
Supplying,Installing, testing & commissioning of dial type Pressure Guage having 100 mm dial & range of 0-15 Kg/cm2 with
Three Thousand Five
syphon and cock.
3.00 3585.50 Hundred Eighty Five Rupees
And Paise Fifty Only
Supplying,Installing, testing & commissioning of Pressure Switch required accessories Three Thousand Five
3.00 3535.00 Hundred Thirty Five Rupees
Supply, installation, testing and commissioning of butterfly valve PN 1.6, with s.s seat duly lSI marked complete with Nuts,
Four Thousand Five
Bolts, washers, gaskets, confirming to IS 13095, of following sizes as required.a.150 mm dia
4.00 4585.40 Hundred Eighty Five Rupees
And Paise Forty Only
Supply, installation, testing and commissioning of butterfly valve PN 1.6, with s.s seat duly lSI marked complete with Nuts, Two Thousand Six Hundred
4.00 Bolts, washers, gaskets, confirming to IS 13095, of following sizes as required. b.100 mm dia 2631.05 Thirty One Rupees And Paise
Supply, installation, testing and commissioning of butterfly valve PN 1.6, with s.s seat duly lSI marked complete with Nuts,
Two Thousand One Hundred
Bolts, washers, gaskets, confirming to IS 13095, of following sizes as required. c. 80 mm dia
1.00 2136.15 Thirty Six Rupees And Paise
Supply, installation, testing and commissioning of butterfly valve PN 1.6, with s.s seat duly lSI marked complete with Nuts,
Bolts, washers, gaskets, confirming to IS 13095, of following sizes as required. d.65 mm dia One Thousand Nine
1.00 1949.30 Hundred Forty Nine Rupees
And Paise Thirty Only
may Be More Or In Figures
Supplying,Installing, testing & commissioning of CI dual plate non-return valve of following sizes conforming to IS: 5312 Five Thousand Six Hundred
1.00 complete with rubber gasket, GI bolts, nuts, washers etc. as required.a.150 mm dia. 5615.60 Fifteen Rupees And Paise
Supplying,Installing, testing & commissioning of CI dual plate non-return valve of following sizes conforming to IS:
Three Thousand Three
complete with rubber gasket, GI bolts, nuts, washers etc. as required. b.65 mm dia
1.00 3393.60 Hundred Ninety Three
Rupees And Paise Sixty Only
Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S. Pipes of Class
C (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / One Thousand Eight
121.00 reducers / couplings / unions / bends / flanges etc., and laying on the surface including painting with two coats of 1888.70 Hundred Eighty Eight Rupees
anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per And Paise Seventy Only
specifications complete as required. 150 mm
Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S. Pipes of Class
C (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / One Thousand Two Hundred
58.00 reducers / couplings / unions / bends / flanges etc., and laying on the surface including painting with two coats of 1277.65 Seventy Seven Rupees And
anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per Paise Sixty Five Only
specifications complete as required. 100 mm
Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S. Pipes of Class
C (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows /
Nine Hundred Forty Nine
124.00 reducers / couplings / unions / bends / flanges etc., and laying on the surface including painting with two coats of
Rupees And Paise Forty Only
anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per
specifications complete as required 80 mm
Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S. Pipes of Class
C (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows /
Seven Hundred Seventeen
113.00 reducers / couplings / unions / bends / flanges etc., and laying on the surface including painting with two coats of
Rupees And Paise Ten Only
anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per
specifications complete as required 65 mm
Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S. Pipes of Class
C (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows /
Five Hundred Eighty Five
68.00 reducers / couplings / unions / bends / flanges etc., and laying on the surface including painting with two coats of
Rupees And Paise Eighty Only
anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per
specifications complete as required 50 mm
Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S. Pipes of Class
C (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows /
Four Hundred Ninety Four
79.00 reducers / couplings / unions / bends / flanges etc., and laying on the surface including painting with two coats of
Rupees And Paise Ninety Only
anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per
specifications complete as required 40 mm
Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S. Pipes of Class
C (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / Four Hundred Forty Nine
42.00 reducers / couplings / unions / bends / flanges etc., and laying on the surface including painting with two coats of 449.45 Rupees And Paise Forty Five
anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per Only
specifications complete as required 32 mm
Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S. Pipes of Class
C (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / Two Hundred Seventy Seven
567.00 reducers / couplings / unions / bends / flanges etc., and laying on the surface including painting with two coats of 277.75 Rupees And Paise Seventy
anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per Five Only
specifications complete as required 25 mm
may Be More Or In Figures
Supplying,Installing, testing & commissioning of Weather proof standard fire hose cabinet (750 mm x 600 mm x 300 mm deep)
made out of 16 SWG powder coated M.S. sheet having single or double opening glazed (4.0 mm thick glass) shutter including Three Thousand Eight
1.00 necessary locking arrangement by allen key, stove enamelled Fire red finish (as per IS : 5, shade no. 536) with " Fire Hose" 3817.80 Hundred Seventeen Rupees
marked on front, suitable for housing 2 nos. 15m long 63 mm dia Hose pipe, 1 No. branch pipe & nozzle spanner (For External And Paise Eighty Only
Supply, Installation, Testing and Commissioning of Weather proof Standard Fire Hose Cabinet wall mounting type (450 mm x One Thousand Eight
6.00 600 mm x 250 mm deep) having single or double opening with necessary locking arrangement by allan key suitable for 1818.00 Hundred Eighteen Rupees
housing 1 nos. hose pipe, 1 no. Branch pipe & nozzle spanner. Only
Supply ,installation, testing and commissioning S.S. Single Headed Fire Hydrant Valve with 80mm N.B. flanged inlet, 63 mm
Four Thousand Seven
dia female instantaneous outlet type. S.S. coupling, blankcap, chain, twist release type lug & all accessories Conforming to
6.00 4772.25 Hundred Seventy Two Rupees
IS:5290. Including fixing with supports, flanged tapping from wet riser,orifice plate complete as required by the Local Fire
And Paise Twenty Five Only
Supply, installation, testing and commissioning non-percolating rubber reinforced lined fire Hose pipe (as per IS:903) of
Four Thousand Ninety
6.00 mm dia and 15 mtrs long.
Rupees And Paise Fifty Only
Supply, Installation, Testing and commissioning of 63 mm dia instantaneous pattern aluminium short branch pipe One Thousand Seven
6.00 1706.90 Hundred Six Rupees And
Paise Ninety Only
Supply, installation, testing and commissioning of First Aid Hose Reel equipment conforming to IS:884 comprising of hose reel
Six Thousand One Hundred
drum, 8 mm shut off nozzle, Rubber hose reel tubing as per IS: 444 of 25 mm dia x 45 mtr. long, painting, Manual fix type
6.00 6135.75 Thirty Five Rupees And Paise
with fixing bracket, anchor fastener, bolts & nuts etc. complete as required by Local Fire Authority.
Seventy Five Only
Supply, installation, testing and commissioning of SS Ball Valve.
One Thousand Two Hundred
6.00 1297.85 Ninety Seven Rupees And
Paise Eighty Five Only
Supply, installation, testing and commissioning of Cast lron Four Way Fire Brigade Inlet as per IS:904 having 63 mm dia inlet
Nine Thousand One
with blank cap and chain with necessary fittings, flanges, nut bolts etc. complete as required.
1.00 9135.45 Hundred Thirty Five Rupees
And Paise Forty Five Only
Supply, Installation, Testing and Commissioning of Gun Metal Air Release Valve with necessary fittings. Size: 25 mm (For One Thousand Seven
1.00 Riser) 1706.90 Hundred Six Rupees And
Paise Ninety Only
Supply, Installation, Testing and commissioning of Quartzoid Bulb type Sprinkler Heads. (a) Pendent Sprinkler 57°C -
Three Hundred Fifty Three
221.00 standard response
Rupees And Paise Fifty Only
Supply, installation, testing and commissioning of ABC type Fire Extinguisher of 6.0 kg confirm to IS:15683, with ISI marked One Thousand Eight
6.00 / TAC approved fitted with required accessories including wall suspension brackets. 1818.00 Hundred Eighteen Rupees
Supply, installation, testing and commissioning of Carbon Dioxide (Co2) type Fire Extinguisher of 4.5 kg confirm to IS:15683, Four Thousand Eight
6.00 with ISI marked / TAC approved fitted with required accessories including wall suspension brackets. 4848.00 Hundred Forty Eight Rupees
Supplying,Installing, testing & commissioning of fire alarm and pump trigger system as per requirement and specification
6.00 606.00 Six Hundred Six Rupees Only
consisting of following items. a.Manual call point:
Supplying,Installing, testing & commissioning of fire alarm and pump trigger system as per requirement and specification
Seven Hundred Fifty Seven
6.00 consisting of following items. b.Hooters:
Rupees And Paise Fifty Only
Supplying,Installing, testing & commissioning of fire alarm and pump trigger system as per requirement and specification Five Hundred Five Rupees
consisting of following items. Pump c.On / Off switch: Only
Supplying,Installing, testing & commissioning of fire alarm and pump trigger system as per requirement and specification Sixty Three Rupees And
consisting of following items. D. 4 core 1.5 sq.mm cu. Flexinble wire Paise Sixty Three Only
may Be More Or In Figures
Supplying,Installing, testing & commissioning of fire alarm and pump trigger system as per requirement and specification One Hundred Six Rupees
consisting of following items. e. 2 core 1.5 sq.mm cu. Flexinble wire And Paise Five Only
Providing and fixing M.S. structural work fabricated from standard sections, (MS rounds, angles, channels etc.) including
cutting to size, drilling, welding, including cost of fasteners, clamps in RCC structural members as directed, including two or One Hundred Sixteen
more coats of synthetic paint over one coat of primer after surface preparation including cutting and making good walls Rupees And Paise Fifteen Only
(Structural other than pipe supoort).
Painting of above ground lines with two coats of red oxide primer and two coat of sinthetic enamal paint (PO.Red)
One Hundred Ninety One
Rupees And Paise Ninety Only
Supplying of AUTOGLOW Signages in Block / Small Letters of Specified Sizes: Fire lift size: 4" X 12"
Two Hundred Fifty Two
Rupees And Paise Fifty Only
Supplying of AUTOGLOW Signages in Block / Small Letters of Specified Sizes: Fire Hydrant: 4" X 12"
Two Hundred Fifty Two
Rupees And Paise Fifty Only
Supplying of AUTOGLOW Signages in Block / Small Letters of Specified Sizes: "DCP" Extinguisher: 8" X 4"
One Hundred Fifty One
Rupees And Paise Fifty Only
Supplying of AUTOGLOW Signages in Block / Small Letters of Specified Sizes: "CO2" Extinguisher: 8" x 4"
One Hundred Fifty One
Rupees And Paise Fifty Only
Supplying of AUTOGLOW Signages in Block / Small Letters of Specified Sizes: In case of Fire, do not use lift, use staircase: 8"
Three Hundred Fifty Three
Rupees And Paise Fifty Only
Coating & Wrapping for underground pipe Wrapping Tape(150mm wide x 4mm thick) bitumen-based polymeric tape (like IWL Seven Hundred Seven
Pypkote or Clexo) is ideal. Rupees Only
Getting Approval NOC of Fire protection system from local fire authority and any other relevant statutory authority at initial
Two Lac Fifty Two Thousand
1.00 and various other stages of work including preperation of report / drawings as per fire authority.
Five Hundred Rupees Only
Medical Grade Copper Pipe : 42mm OD X 1.2mm thick
Two Thousand Six Hundred
Twenty Rupees Only
Medical Grade Copper Pipe : 28mm OD X 0.9mm thick
One Thousand Two Hundred
Eighty Rupees Only
Medical Grade Copper Pipe : 22mm OD X 0.9mm thick Eight Hundred Twenty
Medical Grade Copper Pipe : 15mm OD X 0.9mm thick Six Hundred Fifty Rupees
Medical Grade Copper Pipe : 12mm OD X 0.7mm thick Four Hundred Seventy Eight
Gas Outlet Points/ Terminal Unit : Oxygen Five Thousand Five Hundred
Gas Outlet Points/ Terminal Unit : Nitrous Oxide Five Thousand Five Hundred
Gas Outlet Points/ Terminal Unit : Air 4 bar Five Thousand Five Hundred
Gas Outlet Points/ Terminal Unit : Vacuum Five Thousand Five Hundred
Gas Outlet Points/ Terminal Unit : AGSS
3.00 10000.00 Ten Thousand Rupees Only
may Be More Or In Figures
Two gas Area Valve Service Unit Fourteen Thousand Five
Hundred Rupees Only
Three gas Area Valve Service unit Eighteen Thousand Five
Hundred Rupees Only
Five gas Area Valve Service Unit Twenty Five Thousand Six
Hundred Rupees Only
Medical Gas Area Alarm for 2 services. Fourteen Thousand Five
Hundred Rupees Only
Medical Gas Area Alarm for 3 services Eighteen Thousand Five
Hundred Rupees Only
Medical Gas Area Alarm for 5 services
Twenty Six Thousand Five
Hundred Forty Rupees Only
Oxygen Manifold (2x10) along with tailpipe, NRV and fittings. One Lac Four Thousand
Oxygen Emergency Manifold (2x2) along with tailpipe, NRV & fitting
Forty Seven Thousand Eight
Hundred Rupees Only
BPC flowmeter bottle along with humidifier bottle One Thousand Fifty Rupees
N2O Manifold (2x3) along with tailpipe, NRV and fittings.
Forty Seven Thousand Eight
Hundred Rupees Only
CO2 Manifold (2x3) along with tailpipe, NRV & fitting
Forty Seven Thousand Eight
Hundred Rupees Only
600ml Ward Vacuum unit along with regulator Three Thousand Two
Hundred Fifty Rupees Only
Theatre Suction trolley Eighteen Thousand Five
Hundred Rupees Only
Isolation Lockable line valves :15mm
One Thousand Six Hundred
Fifty Nine Rupees Only
Isolation Lockable line valves : 22 mm Two Thousand Two Hundred
Fifty Rupees Only
Isolation Lockable line valves :28 mm Two Thousand Five Hundred
Fifty Rupees Only
Isolation Lockable line valves :42 mm Four Thousand Five
Hundred Rupees Only
Thirty Eight Thousand
26.00 Providing and Supplying Fowler bed should have Overall dimension: (L) 2138 x (W) 908 x (H) 559mmFunctions : Two
may Be More Or In Figures
Providing and Supplying hospital locker. The bedside locker has single drawer and cabinet with lock and with plastic
molded handle. There is space between plastic top and the cabinet to keep the general items for the frequent use. Cabinet is
Provisionided with lock to keep the valuable items for the safety. overall dimensions should be 490mmW x 410mm D x
941mm H.Corner tube made of ERW round tube with section 25.4 mm dia of 1.2 mm thickness.Cabinet made of CRCA sheet
of 0.8 mm thick Provided with lock.( 470 mm x 410 mm x 382 mm).Top made of ABS of 2.2 mm thick. Top has recessed and
contoured shape for better aesthetic and usability.Plastic molded knob is Provisionided with Matt finish and dome shaped for
Eleven Thousand Nine
76.00 better grip.Plastic molded castors with 50 mm dia placed in diagonal locking arrangement.RAL white, plastic parts in Grey.5
Hundred One Rupees Only
kg UDL on both the tops and 10 kg in the cabinet.All metal components are pre treated with zinc phosphating in 7 tank
process and then powder coated with anti microbial epoxy polyester powder coating to fulfill the requirements for bacterial
protection against at least 2 commonly found bacteria in Hospital environment [Gram positive and Gram Negative].goods are
supplied in knocked down construction to reduce carbon emission. The rate shall include all materials, hardware, and labour
etc. complete as per instruction of engineer-in charge.
Providing and Supplying of IV pole of saline stand. Overall dimension should be 250 mm PCD with height adjustable from
743 mm to 1150 mm. it is fully SS made used on bed with telescopic rod for height adjustment. The bottom adapted is 12 mm
Four Thousand Four
dia, fixed tube is 15.9 mm dia , 1.6 mm thick ERW Tube. Telescopic rod is 12 mm dia ERW tube. there are 2 nos 6 mm dia
10.00 4435.00 Hundred Thirty Five Rupees
hooks to hand saline bags. Maximum load bearing capacity is 2kg per hook.The rate shall include all materials, hardware, and
labour etc. complete as per instruction of engineer-in charge.
Single Step stool is to be made of ERW square tube.Textured and Rubber mat is to be provided, of 20mm X 20mm size. Tube
1.2 mm thick and mat 3.0 mm thick Size:485(L) x 335 (W) X 210 (H) Step stool is to be made of MS square tubes, is to be
strong and firm. Top is to be made of textured rubber offering firm grip for climbing Frame:It should be made up of MS
19mmX19mm section of thickness 1.2 mm. Stool top:stool top should be made up of MS of thickness1.2mm. Rubber
mat:steps should be provided with rubber Mat which is made of natural rubber of thickness 3.2mm. Maximum Two Thousand Five Hundred
weight:maximum safe work load should be 135 kg. welding:To ensure qood quality welding " Co2 Argon" process should be Rupees Only
adhered to. powder coating:All metal components should be pre treated with zinc phosphating in 9 tank process and then
powder coated with anti microbial epoxy polyester powder coating .packing:goods should be supplied in knocked down
construction to reduce carbon emission. In house test report proof:loading test , cycle tests , impact test. Certifications:
Providing and Supplying of Examination couch with full storage of Examination couch with full storage- Overall dimension
1975 mm (L) x 560 mm ( W) x 805 mm (H). Examination couch with three drawers with three cabinets, inbuilt step stool and
BP tray holder.the base frame should made of 30 mm x 30 mmX 1.6 thick ERW tube. The cabinets should made of 1 mm thick
CRCA sheet with recessed plastic handles and with lock and plastic door latch. the hindges of the cabinet should be made of
sheet metal and pin arrangement. The internal dimension of the two sidecabinets should be 422 mm (W) x 455 mm (D) x
mm (H). the internal dimension of the centarl cabinet should be 422 mm (W) x 455 mm (D) x 358 mm (H). The storage cabinet
unit should be mount tubular base frame. The head rest should be adjustable on gas spring which should be actuated with C
shaped handle lever . The drawers should made of 1 mm thick CRCA sheet with recessed plastic handles and work on double
extension ball slides for smooth glide. the internal dimension of the drawer should be 330 mm (W) x 427 mm (D) x 92 mm (H). Forty One Thousand Nine
The mattress platform should be 65 mm thick which is made of 12 mm thick ply and PU foam and covered with leatherite Hundred Rupees Only
cover.the cover should be water resistant, fire retuardant, aniti micraobial . the cover should have in-vitro cytotoxicity test
report from reputed test lab. the end of the top mattress surface should be tapered end edge for ergonomic benifit. There
should be ss304 made tissue roll holder present on the lower side of the back rest. There should be 1 mm thick CRCA made
step stool with leveler with double extension ball slide for smooth operation. There should be 1 mm thick CRCA made BP
aparatus holder which should be adjustable in height on a SS made height adjustable rod. Total load bearing capacity should
be 135 kg. The examination couch should be provided with six numbers levelers made of metal and plastic for adjustment on
the uneven floor. All the metal parts should be pre treated and powder coated with epoxy polyester powder coating.The rate
shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge.
may Be More Or In Figures
Providing and Supplying of Examination couch with full storage of Examination couch with full storage- O overall
dimension of L 2065 X W 850 X H 850 mm. The backrest has ratchet mechanism for tilting the backrest. Leg frames and
intermediate frames should be made of ERW tubes having section of 30 x 30 square tubes with thickness of 1.6mm. Nylon
leg shoes is given to avoid wear and tear. MS sheet metal lying surface of thickness 1.2mm is used. Top sheet metal panel
base frame of 25 x 25 ERW square tubes of thickness 1.6mm is used. Ratchet is made of MS Strip with section 40 x 4 to Twenty Six Thousand Six
Provision the backrest tilt. The table is Provided with Leathrite calf rest which is adjusted on ss304 made lithotomy rod. The Hundred Rupees Only
Rod and the calf rest is ht adjustable and swivel to achieve desired position. The table is Provided with SS bowl stand to collect
fluids and discharge during procedure. Table is pre-treated and powder coated with epoxy powder coating. Safe working load is
135kg. The rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge.
Providing and Supplying of round stool should have of round stool. Overall dimension should be Diagonal Leg Dia 538 mm
H470 min-655max. Top plate made of SS 304 made sheet with spin section of thickness 1mm and non corrosive. It has a
diameter of 305mm, seat base made of MS ring and rectangular tube. EN8 Screw having dia of 22 mm is used for height
adjustment of the seat base. The round hub made of MS ERW tube having dia of 38mm and thickness 2 mm. The Hub is
welded with the legs and it accommodate and cover the lead screw mechanism. The under-structure consist of 4 legs made One Thousand Five Hundred
up of MS ERW tube of diameter 25.4 mm and 1.6mm thick. The press formed pipe leg give a round and clean look. All the Fifty Rupees Only
legs is Provided with 4 nos of Nylon-6 bush. All metal components are pre treated with zinc phosphating in 7 tank process
and then powder coated with epoxy polyester powder coating . Safe working load is 135kg .The rate shall include all
materials, hardware, and labour etc. complete as per instruction of engineer-in charge.
supplying and fixing s.s 304 laboratory stool for hospital used PSP-1037-SS Stool 14" Square stainless steel 18 gauge
contoured seat Stainless steel base with heel rest for added comfort Tubular legs fitted with rubber shoes pretreated and Nine Hundred Twenty
power coated. As directed by Engineer in charge etc Rupees Only
Ward Care Bed Delux (Plain Bed) (I.C. 7500) (1900mmL X 91OmmW X 61OmmH .) Providing and Supplying a Ward Care
Bed Frame work of specially designed CRC rectangular heavy tube. machine pressed CRC sheet top with proper support. SS
Four Thousand Five
10.00 head and foot bows with laminated panels. Four side saline arrangement location L.eg fitted with shoes. Pretreated and 4500.00 Sqmt
Hundred Rupees Only
Powder coated. Selection as per Engineer-In-Charge etc. completed. ( As per Photo attached)
Providing and Supplying STRETCHER ON TROLLEY should have Strecher on trolley with Overall dimension should be
mm (L) x 666 mm (W) x 827 mm (H). It should be removable stretcher on trolley mointed on castors.. The trolley should be
made of 31.75 mm and 25.5 mm dia 1.2 mm thick and 1.6 mm thick ERW tube. The casters should be 200 mm dia
Thirty One Thousand Eight
diagonal lockable castors. stretcher understructure should be made of 25.4 mm dia 1.6 mm thick ERW tube and the top
2.00 31834.00 Hundred Thirty Four Rupees
should be made of 1.2 mm thick CRCA sheet. The stretcher should have provision to mount IV pole at four corners. The
product should be pre treated and powder coated with Epoxy polyster powder coating.The maximum load bearing capacity
should be 135 kg.The rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in
Providing and Supplying Foldable wheel chair should have Foldable wheel chair with Over all dimension should be (L) 790 x
(W) 600 x (H) 870mm Foldable frame structure should be made of section 22x1.2mm A3 carbon steel with chrome finish.
Cross bar should be made of A3 carbon steel with section 25.4 x 1.2mm.The Rear wheel should be made of 24 inch Solid mag
wheels with alloy in the rim .Integrated handrim shoud be provided to drive the wheel chair of section 16x1.2mm A3 carbon
steel with chrome finish. The front wheel should be of 8 inch HUB made of PA polymer and outer with solid rubber. PU molded
Sixteen Thousand Two
1.00 arm rest and base should be made of ABS for better arm support .There should be Leatherite strap for calf rest and
Hundred Ninety Rupees Only
leatherite cushion for seat. The foot rest should be Adjustable alluminimum die cast foot rest with updown and swivel type
mechanism and Push Handles should be made of moulded rubber grip to push the wheelchair. Hand brakes should be
provided to lock the wheelchair at desired location. The finsih of chair should be antirust chrome .The rate shall include all
materials, hardware, and labour etc. complete as per instruction of engineer-in charge.
may Be More Or In Figures
Providing and Supplying Three-Fold partition screen should have Three-Fold partition screen- Overall dimension: L 2637 X
W 640 x H 1720 MM. Frame should be made of ERW tube with movable plastic hinges. The fix frame should be made of
mm dia 1.2 mm thich ERW tube, the movable frame shouuld be made of 19.05 mm dia 1.2 mm thich ERW tube and the leg
frame should be made of 30 mm suqare tube with 1.6 mm .thick. The fixed portion should be 1075 mm width and the movable Ten Thousand Seventy Three
portion should be 778 mm width. 50 mm dia wheel castors should be provided. All MS parts should be pre treated and powder Rupees Only
coated with thermosetting epoxy polyester. Green color Casement fabric must be provided for modesty.The rate shall include
all materials, hardware, and labour etc. complete as per instruction of engineer-in charge.
Providing and Supplying of OXYGEN CYLINDER TROLLEYshould have MS Oxygen cylinder trolley suitable for B type
oxygen cylinder. The overall dimension should be 410 mm (L) x 375 mm (W) x 1112 mm (H). The main frame should made of
Four Thousand Eight
25.4 mm dia 1.6 mm thick ERW tube with 10 mm dia ms made locking rod to keep the cylinder position during transit.The
2.00 4856.00 Hundred Fifty Six Rupees
trolley should be provided with 100 mm dia 25 mm thick PU wheel for longer durability. LDPE made leg bush should be
provided on the legs. Max load bearing capacity should be 50 kg.The rate shall include all materials, hardware, and labour etc.
complete as per instruction of engineer-in charge.
Providing and Supplying of Instrument trolley should have ISO 13485:2016 certificate from NABCB certified agency, CE
certificate from european notified body with 4 digit registration code, ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018
Certified and should be mandatorily submitted along with Bid. of Instrument trolley- SS 304 sheet should be provided at top
for the placement of the instruments being used and also for easy in portability. SS 304 sheet should be provided at the top Twenty Two Thousand Eight
2.00 as well as bottom shelf for keeping the instrument being used. Horizontal bars should be welded with legs so as to provide 22844.00 Hundred Forty Four Rupees
protection at sides with supporting legs giving a sturdy look.Castors of 125mm Dia. should be used for easy in movement. Only
Overall Dimension: 775mm X 531mm X 915mm H. Maximum safe working load must be 40kg.The rate shall include all
materials, hardware, and labour etc. complete as per instruction of engineer-in charge.
Providing and Supplying of Medicine trolley should have Medicine trolley-Overall dimension: - 902(L) X 532(B) X 915(H)
mm. Top shelf and bottom shelf should be made of SS304 sheet with 1mm thickness and 1.2mm. Rest of the components
like supporting legs, horizontal bar handle should be made of SS 304 pipe having dia 31.8, 12.7 mm respectively. The castors Twenty Three Thousand Nine
4.00 of high quality plastic injected molded and anti static having the dia of 125mm should be used.Handles made of SS 304 pipe 23986.00 Hundred Eighty Six Rupees
having section of 16mm and thickness of 1.2mm should be used.The rate shall include all materials, hardware, and labour Only
etc. complete as per instruction of engineer-in charge.
Providing and Supplying soil linen trolly should have I Soiled linen trolley with Overall dimension should be 625 mm dia
and 955 mm height. The base frame should be made of 25 mm dia and 10 mm dia 1.6 mm thick ERW tube.It should be fitted
Eight Thousand Seventy Six
2.00 on 50 mm dia castor.The bag should made of Casement fabric which should be wasable. Overall load bearing capacity should
be 10 kg.The rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge.
Supplying and installing Biomedical waste trolley of 60 Liter capacity of Best Plastic and approved brand and selected Twenty One Thousand Five
colour etc.(As per Photograph) Sintex of Equivalent.(Set of 3 Bucket) Hundred Rupees Only
Providing and Supplying crib should have Crib for infant should be made of wire mesh crib on ms trolley.Dimension Overall
size should be 892 mm (L) x 536 mm (W) x 1008 mm (H).The crib is of 16 mm and 5 mm dia 1.6 mm thick ERW tube. The
mesh is designed to accommodate the baby to Provide ventilation and visibility.The base frame is of 25.4 mm and 10 mm dia
1.6 mm thick ERW tube with 125 mm individual locking castor.The maximum load bearing capacity is 20 kg.All metal
Thirteen Thousand Seven
5.00 components are pre treated with zinc phosphating in 7 tank process and then powder coated with epoxy polyester powder
Hundred Ten Rupees Only
coating .All powder coated parts in RAL white.Maximum patient load is 20 kg.
packing goods are supplied in knocked down construction to reduce carbon emission. The rate shall include all materials,
hardware, and labour etc. complete as per instruction of engineer-in charge.
may Be More Or In Figures
Providing and Supplying PAEDIATRIC SHEET BED should have Overall dimensions should be (L) 1572 mm X 839 mm (W) x
1218 mm (H) till the bed surface Head and foot board are made of 15.8 and 31.75 mm dia 1.2 mm and 1.6 mm thick ERW
tube respectively.ERW round and rectangular tubes are used with thickness of 1.6 mm. Sleek base frame with large clear
space and ground clearance with long base structure provides greater stability.ERW round tubes should be used with
thickness of 1.6mm with section 32mm Lying surface is made of CRCA sheet with thickness of 1 mm and is powder coated
with anti microbial and anti rust coating. It consists of embossed holes to give more stability and load bearing capacity.The Thirty One Thousand Seven
2.00 bed is Provisionided with drop down type full side rails which should made of 15.9 dia and 19 mm dia and 1.6 mm thick ERW 31768.00 Hundred Sixty Eight Rupees
tube.Nylon6 made Leg shoe is Provided for avoiding wear and tear Maximum safe working load is 135 kg.Mattress- Optional Only
All metal components are pre treated with zinc phosphating in 7 tank process and then powder coated with epoxy polyester
powder coating ."1. All powder coated parts in RAL white.2. Other plastic parts in Pantone Cool Grey 8C.goods are supplied in
knocked down construction to reduce carbon emission. The rate shall include all materials, hardware, and labour etc.
complete as per instruction of engineer-in charge.
Providing and Supplying mattress should have Mattress with overall dimension should be (L)615mm*(W)315mm*(H)50mm
MATTRESS FOR CRIB ON BED and CRIB ON TROLLEY , mattress made of 40 density pu foam. The mattress have high end
Two Thousand Eleven
8.00 heavy helium cover which is water resistant, x ray permeable, fire retardant.The rate shall include all materials, hardware, and
labour etc. complete as per instruction of engineer-in charge.
Providing and Supplying of Emergency Crash Cart should have Advanced emergency cart constructed of CRCA Powder
Coated MS Sheet of thickness 1.2mm. overall dimension of L 1037 W x 672 H x 1435 mm.
Should have 5 drawers with drawer configuration: 2 small (390(L)x600(W)X71(H)mm) + 2 medium (390(L)x600(W)X149(H)mm)
+ 1 Large (390(L)x600(W)X227(H)mm). all drawers should be lockable through central locking. Should have anti-tilt
mechanism. should have minimum five drawer with adjustable acrylic separators. Should have cam lock type central locking
mechanism for drawers Provided with 100 security seal tagsShould have following accesories items.defibrillator shelf with
monitor straps, sharps container – 2qty. oxygen cylinder holder, cardiac chest board made of compact laminate, push/pull
writing surface, utility tray, document holder, catheter holder., a waste bin discarding syringes and gloves.wire wounder and Sixty Two Thousand Three
2.00 mounting screws for spike guard.cart should have ABS vacuum formed top tray of thickness 3mm, Aluminum push handle of 62347.00 Hundred Forty Seven Rupees
dia. 25mm built into the end panel for smooth stable movement. Pullout writing surface top. cart should be light, sturdy, Only
scratch and dent resistant. should have 4 TPE corner bumpers for collision protection, Single wheel front locking castors
should have 125mm diameter to facilitate quiet and easy movement. ABS grade made top sheet with 3mm thickness should be
used. MS Cylinder case should be used with 2 Velcro straps to hold the cylinder with a foam padded base. SS 304 grade pipe
of section 16mm and thickness of 1.6mm should be used to to mount IV rod. High endurance anti-static, Aluminum handle
pipe should have section of 25mm with length of 365mm and should have thickness of 1mm giving a glossy finish. Metal
parts should be pre treated and powder coated with epoxy polyster pwder coat. Safe working load must be 55kgs.Optional
accessory: Spike guard/Extension board.The rate shall include all materials, hardware, and labour etc. complete as per
instruction of engineer-in charge.
Supplying of Dust bin of approved brand Sintex or equivalent (as per photographs) of 240 Liter Capacity Three Thousand Six
Hundred Rupees Only
Providing and Supplying storwel with Storwel plain with Gordian Lock shall have an overall size of
916mm(W)x486mm(D)x1981mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of
0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These
components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle
Eight Thousand Sixty Four
2.00 and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall
have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic
base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and
shelving options shall be available.The rate shall include all materials, hardware, and labour etc. complete as per instruction
of engineer-in charge.
may Be More Or In Figures
Providing and Supplying main table with ERU ..Supplying and placing in position Main Table with ERU of the following
specifications. Its size shall be 1650 Width x 700 Depth x 743 Height (Main Desk) 1000 Width X 450Depth X 743 Height
(ERU).Top shall be of 18 mm thickness made of PLT board with 2 mm Edge banding. Wenge and savannah Maple PLT board
shall be used. The Understructure shall be in pre-laminated panels made with PLT boards . 2- Drawerand 3 - Drawer storage Nineteen Thousand Two
units with different combinations to support tops made with 18 mm PLT boards of different colours.Modesty and back panels Hundred Seventy Rupees Only
made with 18 mm PLT boards. The pedestals / storages shall be fitted with necessary locks. The rate shall include all
materials, hardware, and labour etc. complete as per instruction of engineer-in charge.
Providing and Placing Slotted Angle Rack : 1300 W X 500 D X 1895 H mm. To be provided with 5 Shelves. Blotless Rack made Eight Thousand Five
of CRCA Steel. Hundred Rupees Only
Providing and Supplying Leatherette chair office chair.SEAT/BACK ASSEMBLY: The seat and back should be made from
seasoned wood and plywood. The same should be upholstered with black synthetic leather and polyurethane foam.BACK
SIZE: 46.0cm. (W) X 27.0cm. (H) SEAT SIZE: 46.0cm. (W) X 40.0cm. (D).ARMREST TUBE: The armrest tube should be made
of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. tube and powder coated (DFT 40-60 microns).UNDERSTRUCTURE
Four Thousand Eight
5.00 ASSEMBLY: The understructure assembly should be a cantilever type frame made of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk.
Hundred Ten Rupees Only
M.S. E.R.W. tube and powder coated (DFT 40-60 microns).Overall Dimensions of Chair-Seat Height - 48.0 cm.Height -
87.5cm.Width and Depth of Chair as measured from base - Width-58.0 cm and Depth-56.5 cm.The rate shall include all
materials, hardware, and labour etc. complete as per instruction of engineer-in charge.
Providing and Supplying Cushion back High Back Chair. SEAT/BACK ASSEMBLY:-The seat/back shall be made up of
±0.1cm thick hot pressed plywood measured. upholstered with fabric and moulded Polyurethane foam together with moulded
seat and back covers. The back foam shall be designed with contoured lumbar support for extra comfort. Back size -50.0 cm
(W) x 72.0 cm (H) . Seat Size-50.0 cm (W) x 46.5cm. (D). HIGH RESILIENCE(HR) POLYURETHANE FOAM: The HR
Polyurethane foam should be moulded with density 45±2kg/m3-and Hardness load 16 ±2 kgf for 25 Percent
compressionSEAT/BACK COVERS:The seat cover shall be injection moulded in black co-polymer polypropylene and back
cover should be vacuum formed from ABS sheets.ARMRESTS: The one-piece armrests shall be made of black integral skin
polyurethane with 50-70 Shore 'A' Hardness and reinforced with M.S. insert. The armrests shall be scratch and weather
resistant tant. The armrests shall be fitted to the seat with seat/armrest connecting strip assembly made of 0.5 ±0.05-cm. Two Thousand Six Hundred
thick HR steel. CENTER TILT MECHANISM:The center tilt mechanism shall be designed as-360° revolving type, 17° ±2° Sixty Rupees Only
maximum tilt on pivot at center, Upright position locking, Tilt tension adjustment.PNEUMATIC HEIGHT ADJUSTMENT:The
pneumatic height adjustment shall have an adjustment stroke of 12.0 ±0.3cm. TELESCOPIC BELLOW ASSEMBLY: The
bellow shall be 3 piece telescopic type and injection moulded in black Polypropylene. PEDESTAL ASSEMBLY: The pedestal
shall be injection moulded in black 33 Percent glass-filled Nylon-66 and fitted with 5 nos. twin wheel castors. Thepedestal
shall be 66.3 ±0.5cm.(76.3±1.0 cm with castors) TWIN WHEEL CASTORS;The twin wheel castors shall be injection moulded
in Black Nylon.Overall Dimensions of Chair-Seat Height - min 44.2 to max 54.2cm.Height - min103.3 to max 115.3cm.Width
and Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm.The rate shall include all materials,
hardware, and labour etc. complete as per instruction of engineer-in charge.
Providing and Placing WHITE BOARD (2500mm X 1000mm) (Display board for writing / projections) Providing and installing
magnetic matt finish resin coated ceramic white board of approved make with G. I. Sheet backing filled with honey combing
material and proper arrangement for hanging an wall with full length tray at bottom for duster and marker person. Hooks to Five Thousand Eight
be provided on top for hanging charts, maps etc. (Please refer annexure for approved Hundred Fifty Rupees Only
make / manufacturer)
Providing and Placing Notice board having 9mm soft board as a core materail 1mm laminate sheet as back materail and
surface of 1.mm felt cloths, having profile of heavy alumnuim fluted anodized profile 10 to 12 micron of 18 to 25 thick board C
channel and corner is made uo of molded virgin ABS grey colour hanging vertical and horizontal hanginh facilty as per Two Thousand Seven
selected colour and size including all necesaary fixture , faster, fitting, labour material machinary etc complete as selected Hundred Rupees Only
and directed by engineer insharge. Approved make: scholar/pearl/alkonsign/elora ‐Notice Board size 900mm x 1200mm
Overall size:1200x900
Supplying and Placing Slotted shoe Rack : 900 W X 300 D X750 H mm. To be provided with 4 Shelves with SS 304 grade Two Thousand Two Hundred
supporting legs, horizontal bar is made of SS 304 pipe having dia 31.8, 25 mm respectively. Fifty Rupees Only
may Be More Or In Figures
Providing and Placing of Dust bin of approved brand Sintex or equivalent (as per photographs)of 5 Liter Capacity Seven Hundred Twenty
Providing and Placing Photo with Frame, Size : 600 X 400 Providing and Fixing Photo Frame made of Teakwood Border Patti of
Two Thousand Twenty
size 25x25 with melamine polish finish with 3 mm glass and inside the picture on Photo paper with high resolution picture
1.00 2020.41 Rupees And Paise Forty One
quality and sticked on MDF as selected by engineer‐in‐charge including all necessary fixture, fasteners,labour , material etc
Providing and Placing Ajanta Make : Wall Clock Provinding and fixing Ajanta make wall clock of the desired shape and design Five Hundred Thirty One
as selected by engineer in charge Ajanta Wall Clock Rupees Only
Providing and Placing Acrylic Worktop Providing and Arranging arylic work top with 10mm clear imported Acrylic sheet with
Five Thousand Five Hundred
3.00 two brass rods with height adjustable of overall size 580 mm x 400 mm etc complete as diretced by engineer
incharge.Approved Make: scholar/pearl/alkonsign/elora Acrylic Worktop
Providing and Placing Partitions are generally structured by Aluminum extruded sections.All panels are in standard size and
ready to assemble condition.All exterior metal surfaces are POWDER COATED FINISH .12 mm thk. Pre laminated or
laminated panel on both the side of the partition. It has provision for all utility management and to mount worktops, etc., All
joineries are free from Nailing, Screwing and adhesives. .All components are removable without any damage and designed to
reconstruct, reorient or reconfiguration layout very easily.Entire systems are free from maintenance like refinishing anti pest
treatments or refitting, lifetime.It has inherent Sound and thermal insulation properties. All panels are twin layered and very
proper sealing in joint are provided to ensure these properties. System is designed in such a manner that resizing of structure
and related mountings can be carried out at site easily, if required. It is Eco‐Friendly in true sense. Partition Skeleton Main
Vertical Section : Aluminum extruded section having overall size of 73 mm x 29 mm having wall thk. 1.50 mm with provision Five Thousand One Hundred
to connect to outer vertical closing section at all side. Main Horizontal section : Aluminum extruded section having overall size Forty Three Rupees Only
73 mm x 29 mm having wall thk. 1.50 mm with provision to connect with each other at side to supporting panels of 12 mm
thk. on the both sides of partition. Electric trench box section : Aluminum extruded section having over all size 60 mm x
mm having wall thk. 1.40 mm with snap fitting arrangment. Connecting pole section : Aluminum extruded section having
overall size 99.60 x 99.60 box section having wall thk. 1.40 mm and provision to connect with all type of connections. ( i.e. "
L " , " T " and " PLUS connectivity ). Verticle and Horizontal covring seal section : Aluminum extruded section having over
all size 32.20 x 8.40 mm having wall thk. 1.20 and provision to cover all open sides with snap fitting. Double Glass Section :
Aluminum extruded section having over all size 56.0 mm x 9.70 mm having wall thk. 1.20 mm and provision to hold 5 mm
thk. Glass with cushioned rubber for every side of glass on both the sides of the panel. Solid filler panels: Solid panel made
Supplying and placing of Mattress Size 1900L x 840W x 100H Foam Density : 40 +- 2 kg/m3 Hardness in kg : 45+-2 as per Three Thousand Six
5.00 IS:7888 for 25 Percent compression Stitched upholstery cover material Helium Heavy A/F F/R SM Colour – Navy Blue, (350 3667.00 Hundred Sixty Seven Rupees
GSM,0.45 thk) with fire retardant and antimicrobial properties. Bed Matt 100mm thick.. Only
Providing and Fixing 3 Seater Pero Cross Beam made of black powder coated regular MS ERW tube having 8.0+/-0.03 cm x
4.0 +/- .03 cm x 0.2 +/-0.014 cm size. Legs to be chrom plated made of rolled steel with 0.12 +/- 0.013 cm thinkness.Seat Eleven Thousand Four
10.00 and Back Shell to be peforated made from cold rolled M.S. Sheet (DIN 1623 Part 1 ST -12 Grade), 0.14 +/- 0.013 cm 11475.00 Hundred Seventy Five Rupees
thickness. The side Bar is made of chrome Plate solid steel 3.0 cm +/- 0.03cm x1.2 cm +/- 0.03 cm with fluting and plastic Only
inserts. The Shell to be assembled on the cross beam with help of M8 Bolts.
Providing and Supplying office table of the following specifications. Its size shall be 1200 Width x 600 Depth x 740 Height .
The top shall be made from 25 mm thick pre- laminated board . All the edges are sealed with 2 mm thick PVC edge band all
around . Side panels shall be made from 25 mm thick pre- laminated paticle board . All the edges are sealed with 2 mm thick
PVC edge band on the user side and 0.8 mm on the top and bottom side .The side panels have 2 glide screws each for
levelling of the desk. Modesty panel shall be made from 18 mm thick pre- laminated particle board . All the edges are sealed
Seven Thousand Sixty
5.00 with 0.8 mm thick PVC edge band all around. Freestanding Pedestal shall be made from 18 mm pre- laminated particle board
with a combination of 2 mm and 0.8 mm PVC edge band on all the exposed surfaces as per requirement . The drawers are
provided with suitable slides for smooth operation . All the pedestal drawers are centrally locked with a single key .Drawer
slides are of Hettich.The rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in
may Be More Or In Figures
Providing and Supplying office table of the following specifications Its size shall be 1500 Width x 750 Depth x 740 Height .
The top shall be made from 25 mm thick pre- laminated board . All the edges are sealed with 2 mm thick PVC edge band all
around . Side panels shall be made from 25 mm thick pre- laminated paticle board . All the edges are sealed with 2 mm thick
PVC edge band on the user side and 0.8 mm on the top and bottom side .The side panels have 2 glide screws each for
levelling of the desk. Modesty panel shall be made from 18 mm thick pre- laminated particle board . All the edges are sealed
Seven Thousand Eight
2.00 with 0.8 mm thick PVC edge band all around. Freestanding Pedestal shall be made from 18 mm pre- laminated particle board
Hundred Rupees Only
with a combination of 2 mm and 0.8 mm PVC edge band on all the exposed surfaces as per requirement . The drawers are
provided with suitable slides for smooth operation . All the pedestal drawers are centrally locked with a single key .Drawer
slides are of Hettich.The rate shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in
Supplying and Stacking of Tubular Section Cardiac table with Stainless Steel grade 304 of frame of work mounted on four
Four Thousand Six Hundred
5.00 50 mm Castors.etc.(As per Photograph)
Seventy Five Rupees Only
Supplying and Stacking of Tubular section of Stainless steel storage Rack of size 1200mm(width) X 600mm (Depth) and
Nine Thousand One
1.00 1800mm height frame of 304 grade steel.etc.
Hundred Thirty Rupees Only
Providing and Placing inquiry counter with Worksurface of size W - 3665 X D 1060 X H 750 Worksurface and 1350 counter
made of - Decorative Laminate Particle board 25mm thick. Inside radius 700.0 mm outside radius – 1350.0 mm Depth –
mm. Rubberized cork – 18mm thick. should have Glass Frosted of10mm thick Diamond cut finishing on edges. Inside Radius
Sixty One Thousand Two
1.00 – 1202.5mm Outside radius – 1402.5mm Depth – 200mm *Note: Angle sustained within arc surface is 60 deg.Understructure
Hundred Rupees Only
should have Modesty Panel MS Perforated sheet Below Worksurface : 0.8 mm (thick) x 665.0mm (height) x 1345.0 mm (flat
length) Above Worksurface : 0.8mm (Thick) x 260 mm (height) x 1345.0 mm (flat length). Legs MS tube 1.6 mm thick Diameter
50.8 mm Height 604 mm.
Providing and Supplying of Stool Mch Ht Adj + back Hi Base. 1) SEAT ASSEMBLY: The seat should be made up of
1.2±0.1cm thick flat plywood and with moulded Polyurethane foam and should be .upholstered with replaceable synthetic
leather covers.SEAT SIZE: Diameter 40.0 cm ADJUSTMENTS: 360° Revolving type 2) BACK. ASSEMBLY: The back foam
should be designed with contoured Lumbar support for extra comfort. The upholstery should be available in synthetic
leather. *BACK SIZE: 45.0 cm (W) covered with polyurethane foam 3)HIGH RESILIENCE (HR) POLYURETHANE.
AM:The_HR.polyurethane foam should be _moulded with density Equal 45 +1-2 kg/m3 and Hardness load 16 ± 2 kgf for
Percent compression4)HEIGHT ADJUSTMENT: The manual height adjustment should be very easy to operate with a help of a
knob.. It can be easily locked at the most comfortable position. 5)PEDESTAL ASSEMBLY: The five-prong pedestal should be Three Thousand Five
fabricated from 0.2 ± 0.02 cm :thick HR sheet.( should be :. DD 1079 / HR ), powder coated ( DFT 40-60 microns ) and fitted Hundred Rupees Only
with an injection moulded black Polypropylene Hub Cap and 5 nos. twin wheel castors. The pedestal-should be 55.0±0.5cm
pitch-circle-diameter- (65.0±-1,0cm-with-castors).-Circular-foot-ring of 052.0±0.2cm made up of 01.9±0.2 x 0.12±0.0096cm
thk MS ERW Tube for foot support in High-base stool. 6)TWIN WHEEL CASTORS: The twin wheel castors should be injection
moulded in Black Nylon. Width- 65.0cm, Depth- 65.0 cm, Height- 88.0cm to 99.5cm Seat Height- 67.0 to 78.5cm. The rate
shall include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge.
may Be More Or In Figures
Providing and Supplying High Back Chair. SEAT/BACK A SSEMBLY: The seat is made up of 1.2 ± 0.1cm thk. hot pressed
plywood measured.The Back is made up of injection mou1ded glass filled nylon and upholstered using Mesh fabric with high
tenacity yarn.* SEAT SIZE : 47.0 cm. (W) x 51.5 cm (D)* BACK SIZE : 45.0 cm. (W) x 65.3 cm. (H)
HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m° and
hardness 16 ± 2 kgf as per IS:7888 for 25 Percent compression.ARMRESTS : The adjustable armrest is designed with the
following features :• Up-Down adjustment- 8 steps (8 0±0.Scm range)• Height adjustable armrest structure which is Powder
Coated and fitted with an armrest top.• Fixed Armrest Top is PU moulded over metal insert.LUMBAR SUPPORT ASSEMBLY:
The Lumbar support consists of polypropylene pad with moulded polyurethane foam and covered with polyester fabric.The Twelve Thousand One
10.00 Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pa6. Lumbar pad has an 12171.00 Hundred Seventy One Rupees
adjustment of 8.0 ± 0.5 cm in height.FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is designed Only
with the following features.• 360° revolving type.• Single point control.• Front-pivot for tilt with feet resting on ground ensuring
more comfort.• Tilt tension adjustment.• 4-position locking with anti-shock feature.• Seat/back tilting ratio of 1:2.PNEUMATIC
HEiGHT ADJUSTMENT. The pneumatic height adjustment has an adjustment stroke oi 10.0 ± 0.3 cn°.Pedestal Assembly : the
pedestal is injection moulded in black 30 Percent glass filled nylon and fitted with 5 nos. twin wheel castors. The pedestal
pitch center dia is 66.1± 0.5 cm.TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon.
NECKREST : The Neckrest assembly consist of polypropylene pad with moulded polyurethane foam and covered with
polyester fabric Neckrest is fixed to Back Assembly through Neckrest connector Neckrest assembly has height adjustment
of4.2 ± 0.5 cm and rotation adjustment of overall76°+ 2°. The complete neckrest assembly is retro fit to the main chair.The
Providing and Supplyin .Mid Back Chair. SEAT/BACK A SSEMBLY: The seat is made up of 1.2 ± 0.1cm thk. hot pressed
plywood measured.The Back is made up of injection mou1ded glass filled nylon and upholstered using Mesh fabric with high
tenacity yarn.* SEAT SIZE : 47.0 cm. (W) x 51.5 cm (D).* BACK SIZE : 45.0 cm. (W) x 65.3 cm. (H)HIGH RESILIENCE (HR)
POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m° and hardness 16 ± 2 kgf as
per IS:7888 for 25 Percent compression.ARMRESTS : The adjustable armrest is designed with the following features :• Up-
Down adjustment- 8 steps (8 0±0.Scm range)• Height adjustable armrest structure which is Powder Coated and fitted with an
armrest top.• Fixed Armrest Top is PU moulded over metal insert.LUMBAR SUPPORT ASSEMBLY: The Lumbar support
consists of polypropylene pad with moulded polyurethane foam and covered with polyester fabric.The Height of Lumbar pad Eleven Thousand Two
1.00 can be adjusted through two projecting knobs provided on the rear side of the pa6. Lumbar pad has an adjustment of 8.0 ± 11236.00 Hundred Thirty Six Rupees
0.5 cm in height.FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is designedwith the following Only
features.• 360° revolving type.• Single point control.• Front-pivot for tilt with feet resting on ground ensuring more comfort.•
Tilt tension adjustment.• 4-position locking with anti-shock feature.• Seat/back tilting ratio of 1:2.PNEUMATIC HEiGHT
ADJUSTMENT. The pneumatic height adjustment has an adjustment stroke oi 10.0 ± 0.3 cn°.Pedestal Assembly : the pedestal
is injection moulded in black 30 Percent glass filled nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch center
dia is 66.1± 0.5 cm.TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon.The rate shall
include all materials, hardware, and labour etc. complete as per instruction of engineer-in charge.
MOTORIZED OPERATION TABLE PRIMA (DR)• Size: 1970 x 535 x 780 - 1070 mm approx• Eccentric Column Design.•
section top.• One wired Hand set & an Additional controller based on the column of the table• Completely 304 grade S.S with
Radiolucent top.• Actuators from T Motion.4 Actuator based design.• Single Leg Section.• With Battery Back up.• Head and
Three Lac Twenty Eight
2.00 foot end can be interchanged• Positions: Height, TB& RTB, Lateral tilt, Back Rest Manual Kidney Bridge attachment.•
Thousand Rupees Only
Accessories: Padded Leg rest with Ball & Socket. Shoulder Support, IV Arm boards. Anesthetic Screen , Buttock Supports &
50mm High Density Mattress.• Paddle for Floor Locking.• Imported Centre Locking Non Marking Castors.
may Be More Or In Figures
MOTORIZED OBSTETRICS LABOUR BED Size:2155 x 1010 x540- 905 mm ht (Approx.) 81" x 39.5"x 21" - 35"h
t(Approx.)Platform size: 1985 x 700 / 78" x 27.5"Central Locking Castors. 125 mm Motorised Backrest, Height Adjustment,
Trendelenburg & Reverse rendelenburg Wired handset control for all positions3 section mattress with head and seat section in
100 mm and foot end mattress is 125 mm Leg section telescoped under the Seat Section for lithotomy position.Completely Pre-
treated & Powder Coated.Padded thy rest with ball & socket joint for easy positioning Removable Waste collection tray in SS
Actuators and lifting column aesthetically covered. 2 Pcs. Full Length Extra Long Side Polymer Rails 4 pole Telescopic IV One Lac Seventy Thousand
attachment, S.S Bearing down supports with handles and grips. Easily Detachable Polymer Head & Foot End bows with 31.75 Rupees Only
mm dia, 315 mm Metal inserts for extra strength, 2 mm thickness.Mattress Platform 5 mm Thick in PRB Sheet (Anti-Virus,
Anti-bacterial, Fire resistant, resistance to harmful chemicals, Dry heat tested, Wet heat tested, scratch resistant, and
resistance to microbial growth etc.).
SCRUB SINK (1 Ft)Completely 304 Grade S.S 18 Swg thick Can be provided with Elbow operated tap 1 mm thick SS 304 sheet
Removable Bottom Cover for ease in maintenance Elbow operated tap INSTALLTION TO BE DONE BY HOSPITAL Twenty One Thousand
DIALYSIS CHAIR/ BED Overall Dimensions:1980mm x 960mm x 530 -750 mm.ht Platform Size:1980mm x 610mm / 78" X
24" (Apron.) Bed Top:3 section made from Back Rest: 0-70 Degree Foot Section:0-60 Degree Approx. Reverse Trendelnberg:0
to 10Degree Approx.Castors125 mm complete and directional locking Four function Motorized for Back rest, Height, RTB &
Chair position. Provided with 75 mm upholstery thick mattress Extendable, Detachable foot rest.Height adjustable and
One Lac Forty Thousand
2.00 extendable 2 hands rest All operation with help of corded back lit remote Optionally available with railings.Base frame made
form 60mm x30 mm Rectangular .ERW tube Two IV Provisions with 4 pole IV rod. Single key for chair Position Detachable
food table with laminated top Safe working load : 120 KG.
In Wards: - Sixteen Crore Eleven Lac Seventy Seven Thousand Forty Three Rupees Only
The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.
The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
GST and Income tax TDS will be deducted at a source while making payments of bills
In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in
S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost
of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender. Input rate is Rs. 5234 MT.
GST extra applicable in case of work based on SOR 2024-25 only.
Servicable materials available after Demolishing / Dismentalling any item should be hand over to the concerned as per instruction of PIU engineer in charge.
Deputy Executive Engineer Executive Engineer
P.I.U., Zone-2, Amreli P.I.U., Zone-2, Amreli
Deputy Executive Engineer (Ele.) Executive Engineer (Ele.)
P.I.U., Zone-2, Amreli P.I.U., Zone-2, Amreli
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
20-Special Conditions-27-05-2026.pdf
Building-Specification_Part1.pdf
Building-Specification_Part2.pdf
Building-Specification_Part3.pdf
GRs and Conditions-11-06-24.pdf
Insurance Clause-03-11-2025.pdf
Performance Bond and Bitumen date.pdf
Standard Specification for Electrical Work.pdf
02. Schedule-b Lilya.pdf
DWG-LILIYA CHC.pdf
SBD_Liliya_CHC.pdf
Section-5_ Specification MGPS and OT Items.pdf
Section-5__Specification Fire fighting Work.pdf
Section-5__Specification Plumbing Work.pdf
Section-5__Specifications Electrical Works.pdf
Section-5__Specifications Safety Norms.pdf
Section-5__Specifications_ELV.pdf
Section-5__Specifitions Shuttring.pdf
Special condition section 2.pdf
Special Condition.pdf
Tender Details-110-01.pdf
Make List Dt-15-10-25-6680_Part1.pdf
Make List Dt-15-10-25-6680_Part2.pdf
Make List Dt-15-10-25-6680_Part3.pdf
01.2-Schedule-B-Lilya-R1.pdf
CORRIGENDUM
01.1-Corrigendum-01-SB-Upload.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .