Tender for ARC for U.G.cable fault finding work providing jointing kit as specify by DGVCL Company at Puna sdn or any other S/Dn under various scheme under Surat Rural Division.

Name of Work:Tender for ARC for U.G.cable fault finding work providing jointing kit as specify by DGVCL

Company at Puna sdn or any other S/Dn under various scheme under Surat Rural Division.

No. Item Code Description Unit RATE

Labour charge for excavation of cable trench of 400mm width x 1200mm depth, in any type of soil for laying of cable

1 9925000001 of size up to 240 mm2 (For additional cable 200 mm additional width shall be considered i.e. half trench length is to be Meter

Labour charge for excavation of cable trench of 600mm width x 1200mm depth, in any type of soil for laying of cable

2 9925000002 of size up to 240 mm2 (For additional cable 200 mm additional width shall be considered i.e. half trench length is to be Meter

Labour charge for laying of 11kV / 22 kV XLPE Cable of size up to 240 mm2 & preparation of sand layer 100mm thick,

in the cable trench & covering the cable with 150 mm dia (INNER), thickness 25 mm, 1.0 meter long RCC half round

muffs and providing and fixing of 4inch width yellow colour polyethylene tape with printing"CAUTION ELECTRIC CABLE

BELOW' at 0.75 m depth from ground surface after laying cable in trench. This will provide indication that electric

cable is passing underground so as to protect cable from mechanical injuries, refilling the same, as per Instruction of E

gineer in Charge (EIC) .

Supply & fixing of heat shrink type end terminations (outdoor) for up to 11kV 3C x 185 mm2 size XLPE cable as per

DGVCL technical s ecification

Supply & fixing of heat shrinkable straight through joint for up to 11kV 3C x 185 mm 2 size XLPE cables as per DGVCL

technical specification.

Supply & fixing of heat & shrinkable end terminations (outdoor) for up to 22 kV 3C x 185 mm 2 size XLPE cable ( as per

DGVCL technical specification)

Supply & fixing of heat shrinkable straight through joint type for up to 22kV 3C x 185 mm 2 size XLPE cable as per

DGVCL technical specification

Labour charge for excavation of 2100mm long x 1200mm wide x 1200 mm deep joint pits for installation of 11kV /

22kV Straight through joints as per instruction of engineer-in-charge & covering the cable with 150 mm dia (Outer),

thickness 25 mm, 1.0 meter long RCC half round muffs & refilling same as per instruction of EIC .

Charges for attending 11/22 KV Under ground cable fault of size 185/240 mm2 using cable fault locator machine at

various location including transportation of fault locator machine and require excavation to attend the fault.Work of

fault finding 11/22 kv cable underground XLPE cable fault locating exact place of fault.

Testing of cable at various points and commissioning the feeder as per instruction of engineer-in-charge.Test result

10 9925000025 shall be submitted by contractor with bill. No

Providing and fixing heat shrinkable type cable termination kit suitable for 11KV 1C *70 sq.mm AB cable for outdoor

termination application

Providing and fixing heat shrinkable type cable termination kit suitable for 22 KV 1C *70 sq.mm AB cable for outdoor

termination application Nos

Est.total (In Rs.)

Contractor Sign & Stamp Surat Rural Division,DGVCL