Horizontal Construction of Fire Station at Kandi in the District of Murshidabad under West Bengal Fire and Emergency Services. Electrical Installation Works.

Amount

Dismantling the existing wiring, PBDB, SPNDB, main switch, Tube fittings, Ceiling Fan, different size cables and wire etc. and mending goods the damages to original finish and supply to store, also replacing old accessories as per direction of site engineer.

S&F 415V FN 200A TPN Switch (Cat No. SK 95642) Fuse Unit (Cat No. SF 94233) with SS Enclosure (Cat No. SK 95681) on Angle iron Frame (Make - L&T/ Siemens )

S&F double door 4 way VTPN Encl. (607914) MCB distribution board for MCCB incomer with IP 42/43 protection on angle iron frame on wall & mending good the damages to original finish incl. interconnection with suitable size of copper wire & neutral link & provision for e/a (make - Legrand) Incoming- 415V 160 A 4 pole MCCB - 1 No Outgoing- i) 415V 63A 3 pole MCB - 4

S&F 415V 16A -32A per way 6 way MCB DB with SS enclosure double door with IP 42/43 protection with 4 pole isolator as incomer & SPMCB (C- curve 10KA ) as outgoing concealed in wall after cutting the wall and mending good the damages to original finish incl. inter connection with suitable size of Cu. wire and neutral link and provision for earthing attachment. a) 415V 100A 4 Pole isiolator-1 no b) 450V 16-32A per way SPMCB - 18Nos. Make - legrand.

S&F 250V (2+10) way SPNBDB with SS enclosure double door recessed in wall after cutting the wall and mending good the damages to original finish to incl. inter connection with suitable size for copper wire and neutral link and provision for earthing attachment. a) 250 V 40A DP isolator - 1 no. b) 250V 6-16A SPMCB - 12Nos. (Make - Legrand)

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FRLSH' PVC insulated & unsheathed single core stranded copper wire (Brand- Finolex) in 19 mm bore, 3 mm thick polythen pipe (for horizontal & vertical run in wall and celing portion through prelaid polythen pipe) complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC Avarage Run 10 Mtr.

DO-DO-DO- (On Board Plug)

b) Do-------Do--- separate plug Average run 4.5 Mtr

S/F 240V. 16 A. 6 pin (5/15 combo) modular type plug socket 2 nos., with 2 nos. 16 A. modular type switch (Brand approved by EIC) without plug top in 6 modular G.I. box and top cover plate flushed in wall incl. S/F switch and cover plate and making necy. Connection with PVC copper wire and earth continuity wire etc. (For power board)

S & F 240V, 16A 6 pin 1 no Modular type plug socket(Approve make), & switch on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. Connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch (Brand approved by EIC), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing of 230V 4ft LED light fittings complete with all allied accessories, LED tube light , Incl necy connections.

(a) Single (Philips Cat No-TMC501P1 x TLED) with one no master LED tube 1200 mm 18W 2100lm

(b) Double tube fitting (Philips Cat No-TMC501 P 2 x TLED)with two nos master LED tube 1200 mm 18W,2100lm

S&F 240V 50HZ 48" sweep (1200mm) ceiling fan complete with down rod, canopy, fork, etc. (make- Crompton - High Speed) and fixing the ceiling fan complete with blades, canopy, fork, rubber, bush etc. incl. S&F connecting wire for down rod upto 300cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sq.mm. Flexible copper wire.

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.

S&F 250V 12" sweep AC Exhaust (Heavy Duty, EPC/Crompton) incl. fixing the Exhaust fan after making hole in wall and making good the damages and smooth cement finish etc. as practicable as possible and providing necessary length of PVC insulated wire and making connection also S&F of loover shutter/ coul on wall with necessary bolts & nuts as per GS.

S & F 250V AC /DC superior type Call Bell as per general schedule.

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Earthing the insulation by 2" (50mm) dia ISI (M) GI pipe 3.64 mm thick x3.04 Mtr long and 1x4 SWG GI (Hot DIP) wire (4 Mtr. Long) 13mm dia x 80mm long GI bolts, double nuts, double washer incl S&F 15mm dia GI pipe protection (1 mtr long) to be filled with bitumen partly under the ground level and partly above ground level and restoring surface duly rammed as per GS in soft soil.

Supply&deliver and Painting of ST Pole of length upto 9 mtrs. Long with 2 coat of Al. Paints over one coat of R.O. primer after cleaning the pole surface by sand / emary paper etc. for receiving the fresh coat of paint.(calcutta pole/equivalent)

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly.up to 9 mtr pole

Extra on items 1& 2 above, for providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) suitable for alkathene/ polythene pipe entry as directed for street light wiring, incl. S & F 25cmx25cmx10cm GI Loop box, 16SWG & incl. drilled hole in pole

S/ Erection of 1.5 mtr long 40mm dia detacheble Single Arm Bracket on 80mm dia 2 m ST pole including painting with all require accessories for 125 W street light as per direction of E.I.C.

Providing CC (6:3:1) muffing 600x600x700 mm in size or equivalent size cylindrical muffing above groung floor level around the pole base complete with 3mm thick neatly finished cement plaster all round after dismantling the un-servicable muffing if necessary. (without loop Box).(for ST pole, Gate light)

S &Fwater proof loop box

S & F 72 watt LED street light fittings complete with all accessories duty wired for ready to use (Approved make) to be fitted in the existing pole & new installation pole as per the direction of EIC. Cat No: BRP410 LED CW 072 MR FG SI PSU GR

Supply and fixing of low bay light (philips make-BY201P LED 78S CW PSUHE PC)

S & F 40mm dia 1.5 mtr long datachable type GI single arm bracket suitable for fixing on wall. The arm bracket shall be properly fixing arrangement on wall by bolts, nuts and washer as per direction of EIC.

S & Drawing 2x1.5 sqmm single core copper wire in polythene pipe from loop box to fittings.

Painting of 40 mm dia. 1.5 m long steel single arm bracket with two coat of super enamal synthetic paint over one coat of red oxide primer approve brand.

S & F gate light fittings complete with all accessories incl. making necessary connection incl. S & F of net guard arrangement. Mapal.

Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.

S & F 230V 36 W LED street light fittings fittings complete with all accessories (Make - Philips, Cat No. .BRP409 LED CW 036 MR FG S1 PSU GR) to be fixed on arm bracket on erected pole

S&F 415V FN 160A TPN on load change over Switchon Angle iron Frame as to GS & as per the direction of EIC (Make - L&T )

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages

S & F & instllation of 3 nos Gong bell for 1st floor, ground floor & outside campus, with control circuit in the duty room such that each bell can be operated separately as well as operating all at a time.

Supplying & Drawing 1.1KV PVC insulated single core copper wire( Finolex- FRLSH make) cutting channel of 40mm x 40mm size on masonry wall incl. S&F heavy gauge 19mm dia. 3mm thick polythene pipe without earth continuity wire by means of iron hooks and supplying and drawing (18 SWG) GI wire as fish wire incl. mending good the damages to building works.

a)2x6 sqmm + 1x4 sqmm from TPNMCBDB to spndb

b)2x2.5 sqmm +1x1.5 sqmm (for power plug)

c)2x4 sqmm +1x2.5 sqmm (AC M/C)

d)3x1.5 sqmm

S & lying of the following size 1.1 kv.gr. PVC/A Al. cable as below (Havells/Gloston) with 2 nos.10 SWG G.I wire after cutting floor/pavement /wall and making holes incl. embedding the cable at an averate depth as below and mending good the damages to original finish incl. removing the rubbish.

a)2 Core 10 Sqmm.

b)4 Core 16 Sqmm. (VTPN toPDB essential)

c)3.5Core 70 Sqmm. (PANEL to VTPN)

Finishing the end of Following XLPE/PVC armoured cable by crimping method incl. S &F solder less socket tapes anticorrosive paste and jointing materials

a)2 Core 10 Sqmm.

b)4 Core 16 Sqmm.

c)3.5Core 70 Sqmm.

S & F compression type gland complete with brass gland, brass rings & rubber ring for dust & moisture proof entry of XLPE/PVC armored cable as below

a)2 Core 10 Sqmm.

b)4 Core 16 Sqmm.

c)3.5Core 70 Sqmm.

Supply & drawing of 1.1 KV Grade 2 core 10sqmm PVC/A Al cable portly recessed in wall & mending in U.G. trench with brick protection as per GS.

S/Laying 40mm dia G.I pipe for cable protection and all jointing materials.(Make Tata M)(Avg 1.5mtr)

PARTHA SARKAR

JOGMAYA ENGINEERING