Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.4 LAccepted-Finance HIMACHAL PRADESH HP | L1 | Accepted-Finance Lowest | |
| 2 | L2₹1.5 L+₹4,395.10 (3.06%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹1.5 L+₹8,566.50 (5.97%)Rejected-Finance | L3 | Rejected-Finance Other than lowest |
Tender Value
₹1.5 L
EMD Value
₹3,000
Closing Date
26 Jun 2025, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
EE JSV Mandi
Construction of RCC Circular Sector Storage Tank 10000 Ltr capacity at Bhatwari
2025_HPIPH_107620_1
2751-2800
Open Tender
Civil Works
Item Rate
90 days
Bhatwari
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
₹3,000
25 Jul 2025
17 Jun 2025
27 Jun 2025
17 Jun 2025
26 Jun 2025
17 Jun 2025
Amount
Excavation in foundation and trenches etc. in earth work in all kinds of soil such as pick work, jumper work, blasting soft or hard rock or by chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming / dressing of sidesand bed stacking the excavated soil clear from the edge of excavation and returning the excavated soil after completion of work in 15cm layers when required into plinth , sides of foundation etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge.
Providing and laying cement concrete 1:3:6 ( 1cement:3sand: 6graded stone aggregate 40 mm nominal size) and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts.
Providing and laying cement concrete 1:11/2 :3 ( 1cement: 1 1/2 sand: 3graded stone aggregate 20 mm nominal size )and curing complete excluding the cost of form work and reinforcement in all leads and lifts in:-
Foundation, footings base of columns and the like mass concrete.in all leads and lifts
Walls any thickness but not less than 0.1 mtr. thickness attached pillasters, buttresses plinth and string courses etc. from top of foundation level upto floor two level in all leads and lifts
Providing and laying cement concrete 1:2:4 (1cement:2sand : 4graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work and re-inforcement for reinforced concrete work in all leads and lifts in:-
Suspended floors, roofs,landings and shelves and their supports, balconies, beams, girders, bressumers and cantilivers up to floor two level.
Providing form work with steel plates 3.15mm thick welded with angle iron 30x30x5mm so as to give a fair finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4mtrs. and removal of the same for in-situ reinforced concrete and plain concrete work in all leads and lifts.
Vertical surface such as walls(any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like
Flat surface such as soffits of suspended floors, roofs, landing and the like floor etc. upto 200mm in thickness as per direction and to the entire satisfaction of the Engineer-in-charge.
Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level including cost of binding wires and carriage of materials upto all leads and lifts complete in all respects.
Providing, supplying and Fixing of steel / fiber reinforcement concrete SFRC Man Cover with Frame conforming to IS-12592 -Part-I-1998 with latest ammendments 560 mm (Medium Duty) in all leads and lifts.
Providing and fixing of MS fabricated protection panel 750x750mm made of MS angle 40x40x4mm frame, MS angle 30x30x3mm for cover, MS flat 25x5mm for fixing of sliding door bolts,& MS sheet (12 gauge)2.5 mm thick for protection of manhole cover of storage tank including the cost of cutting and welding of MS angle flat and MS sheet, embending in RCC slab by drilling holes in MS angle and in RCC slab. Provision for providing and fixing sliding door bolts,3x16mm,MS handles 100mm, lock andd applying a priming coat red oxide paint and painting two coats with steel paint (Firoza blue) complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer-in-charge.
VED RAM THAKUR (BID ID -528884)
Bhavneshwar (BID ID -528885)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .