PROVISION OF PYROTECHNIC STORE AND AOLO STAND AND CERTAIN WORK SERVICES AND PROVISION OF WIDENING OF WEST EXIT GATE AT PERIMETER WALL NEAR DSC MESS ALONG WITH MISC WORKS AT AF STATION BARRACKPORE UNDER GE (AF) BARRACKPORE

Surface dressing n exc 15 cm deep in soft/losse soil complete all as specified and directed.

Excavating over areas n exc1.5 m deep and getting out in soft/losse soil complete all as specified and directed.

Excavating over areas exc 1.5 m but n. exc 3 m deep and getting out in soft/losse soil complete all as specified and directed.

Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 m in depth for foundation etc or for shafts, wells, cess pits man holes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Material and labour for PCC (1:3:6) type C2 (using 40 mm graded stone aggregate ) as in foundation, filling and mass concrete complete all as specified and directed.

Material and labour for reinforced cement concrete M-25 (design mix) (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Material and labour for reinforced cement concrete M-25 (design mix) (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.

Material and labour for reinforced cement concrete M-25 (Design Mix) (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Material and labour for reinforced cement concrete M-25 (design mix) (using 20mm graded stone aggregate) as in walls, retaining walls, basement walls, ballast walls and the like (parapet walls); any thickness including attached pilasters and buttresses complete all as specified and directed.

Material and labour for reinforced cement concrete M-25 (design mix) (using 20mm graded stone aggregate) as in chajjas and the like concrete complete all as specified and directed.

Material and labour for reinforced cement concrete M-25 (design mix) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material and labour for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finished flat surfaces of concrete complete all as specified and directed.

Material and labour for form work to pillars, posts, struts, piers, columns and stanchions with rough finished square, rectangular, or polygonal surfaces of concrete complete all as specified and directed.

Material and labour for form work to sides and soffits of floor or roof beams, slab, girders, bres-summers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. with rough finished flat surfaces of concrete complete all as specified and directed.

Material and labour for form work to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter with rough finished flat surfaces of concrete complete all as specified and directed.

Material and labour for formwork to chullah hoods, chajjas, troughs and similar items including edges with rough finished flat surfaces of concrete complete all as specified and directed.

Material and labour for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or slopping) with rough finished flat surfaces of concrete complete all as specified and directed.

Material and labour for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide with rough finished flat surfaces of concrete complete all as specified and directed.

Material and labour for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

Material and labour for mild steel TMT bars 6 to 8 mm dia, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

All as per item No 21.00 above but 6mm dia and over upto 10mm dia for stirrups, spacer, binders and -ditto-.

Material and labour for brick work with fly ash bricks, modular size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Material and labour for mild steel works in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Material and labour for 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed.

Material and labour for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces with using water proofing coumpound (WPC) @ 200ml per bag (50Kg) of cement or as per manufacturers instruction and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed. Note : WPC will be measured and paid separately under respective item.

Material and labour for 5mm thick rendering on concrete surfaces in cement mortar (1:3) and finish the surfaces even and smooth without using extra cement as in ceiling complete all as specified and directed.

Material and labour for 5mm thick rendering in cement mortar (1:3) with using water proofing coumpound (WPC) @ 200 ml per bag of cement (50 Kg) or as per manufacturers instruction on roof top while concrete is green to become integrated part of concrete padding layer and finish the surfaces even and smooth without using extra cement complete all as specified and directed. Note : WPC will be measured and paid separately under respective item.

Supply only liquid water proofing compound (WPC) complete all as specified and directed.

Material and labour for hardcore of broken stone or boulder of gauge n.exc 63mm, deposited, spread and leveled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

Material and labour for 75mm thick PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in plinth protection, laid in panels including finishing the concrete surface even and smooth without using extra cement complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 250mm in soft/loose soil, complete all as specified and directed.

Spreading and levelling available earth in layers n exc. 25cm thick including well ramming including watering as required for filling under floors complete all as specified and directed.

Removing excavated material (soil) not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Material and labour for providing polythene film 125micron thick complete all as specified and directed.

Material and labour for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base, floor, pavings etc complete all as specified and directed.

Material and labour for 100mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base, floor etc complete all as specified and directed.

Material and labour for 75mm thick PCC (1:2:4) type B-2 (using 40mm graded stone aggregate) as in sub base, floor etc complete all as specified and directed.

Material and labour for 40mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in sub base, floor, paving etc complete all as specified and directed.

Material and labour for 75 mm thick M-25 (design mix) concrete (wearproof topping), laid in pannels n.exc 2.00m linear dimension with 4 mm thick glass dividing strips as specified (incorporating mixing of an approved metallic floor hardner), laid on concrete floors and pavings and finished the top even and smooth after treating the concrete surface with three dressings of sodium silicate solution complete all as specified and directed. Note: - Metallic hardener and glass dividing strips shall be measured and paid separately under respective items.

Supply only metallic floor hardener complete all as specified and directed. Make- FOSROC/ STP/ Asian Pints Ltd.

Material and labour for setting coat of 3mm thick in CM (1:2), trowelled to even and smooth finish over and including rendering 10mm thick in cement mortar (1:6) on fair faces of brick work or concrete wall surfaces complete all as specified and directed.

Material and labour for 4mm thick and 70 mm wide glass dividing strips, inserted in position, conform to design as in floors complete all as specified and directed.

Material and labour for machine cut Kota stone slab flooring 22-25mm thick over 20mm thick screed bed in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed.

Material and labour for machine cut Kota stone slab 20-25mm thick in skirting laid over and including 10mm thick rendering in cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of acrylic washable distemper over a coat of alkali resistance primer complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint (camouflage pattern) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming one coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

Material and labour for water proofing treatment to RCC roof surface comprising with the following course of treatment/specifications from bottom to top :- (a) Applying cold bituminous primer @ 0.30 liters per sqm confirming to IS 3384 over plastered surfaces of roof. (b) One layer of APP based polymeric membrane 3mm thick, weight not less than 3.50 kgs per sqm, reinforced with non woven polyester matt central core fabric (weight not less than 160 GSM) and coated on both side with and including layer of APP modified bitumen and finished with and including micro-prefabricated heat fusible polythene film on both surfaces. (c) Applying one coats of hot bitumen 85/25 grade @ 1.20 kg per sqm over membrane surface. (d) Finally applying two coats of bituminous aluminum paint @ 0.10 ltrs per sqm per coat on top surface. Note:- (i) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions. (ii) A minimum overlap of 150mm and 100mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturers instructions. Make of APP membrane:- Super Thermolay of M/s STP Ltd, Hyperplas of M/s IWL India Ltd, Hydrostop of M/s Tiki Tar Danosa (India) pvt ltd, , M/s FOSROC Chemicals, Smartcare APP membranes of M/s Asian Paints Ltd.

Supply and fix structural steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing conforming to Fe-410 W (Gde E-250) quality-A complete all as specified and directed.

Supply and fix mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work and hung as gates etc. conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Material and labour for preperation of new or previously untreated steel surface of any description, over 10cm in width or girth and applying two coat of fire resisting paint over one coat of primer complete all as specified and directed.

Material and labour for preperation of new or previously untreated plaster surface of walls and applying two coat of plastic emulsion paint over one coat of primer complete all as specified and directed.

Material and labour for writing letters or figures (Block. Roman, Italic or Indian) with synthetic enamel paint for 15cm height of letter complete all as specified and directed.

Material and labour for writing/ making labels, etc, n exc 0.1 sqm each, including cutting in edges with two coats of plastic emulsion paint complete all as specified and directed.

Material and labour for anti-termite treatement for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (area of the sub structure in contact with backfill to be measured) complete all as specified and directed.

Material and labour for anti-termite treatement for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

Material and labour for anti-termite treatement for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

Material and labour for anti-termite treatement for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc. 15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and directed.

Taking down plastering on lathing (other than wire- netting), without removing lathing, in cement mortar (one side only measured in cases where both sides are plastered) complete all as specified and directed.

Taking down chowkhats with shutter (without taking of shutter from the frame) n.exc.1.5 Sqm each and removing from site complete all as specified and directed.

Materials and labour for half brick thick brick work with fly ash bricks, modular size, straight or curved on plan to any radius built in cement mortar (1:4) complete all as specified and directed.

Material and labour for precast cement concrete (1:2:4) type B1 (20 mm using graded stone aggregates) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling) corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in cement mortar (1:4) complete with joints to match chamfered angles and throating including formwork complete all as specified and directed.

Material and labour for cement concrete (1:2:4) type B1 (20 mm using graded stone aggregates) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including formwork complete all as specified and directed.

Material and labour for cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hardcore, etc. including removing rubbish from site complete all as specified and directed.

Material and labour for cutting holes into or through brick walls built in cement mortar and making good in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required superfacial area exc 150 sqcm but not exc 400 sqcm complete all as specified and directed.

Material and labour for forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work with cement mortar (1:4) complete all as specified and directed.

Material and labour for making good under cills or over arches, lintels and bressummers including all pinning when necessary with cement mortar (1:4) complete all as specified and directed.

Material and labour for joint free ceramic, non skid coloured tiles (premium quality) 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exc. 0.38 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Material and labour for glazed ceramic tiles of size 350x250x7 mm / 450x350x7 mm (premium quality) coloured in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of acrylic washable distemper over a coat of alkali resistance primer over 1mm thick plaster of paris putty complete all as specified and as directed.

Supply and fix rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-410 (Gde E-250 quality-A complete all as specified and directed.

Material and labour for mild steel rag or lewis bolts, diameter of neck 20 mm, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, length of bolt exc 30cm long complete all as specified and directed.

Supply and fix 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based corrugated / semi corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and directed.

Supply and fix false ceiling with powder coated exposed GI grid suspension system (E-grid T-2430 or equivalent load carrying capacity- 12.50 Kg/sqm with mid span deflection n. exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long of size- 24x38mm x 0.25mm thick, cross tee of section size- 24x27mm x 0.25mm thick 1200mm/600mm long and wall angle of section size 22x22mm x 0.4mm thick. The wall angle shall be fixed on PVC dash fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The main runners to be placed @ 1200mm, The cross tee 1200mm will be inserted in pre-cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmx600mm. Additional cross tee of 600mm shall be placed perpendicular to the cross tee1200mm long to finally form a grid of 600mm x 600mm shall be supported by 4mm dia G.I. wire from perlins/soffits. 6mm thick high pressure steam cured non Asbestos fibre cement designer ceiling board (density> 1200kg/cum, modules of rupture (M.O.R)-15.85 Mpa, thermal conductivity (k)-0.0872 W/mk) of size 595mm x 595mm, confirming to IS 14862 & type B catagory III of ISO 8336-1993, (Reaction of fire-A2 -s1-d0) tested as per EN 13501 Part-I & BS-476 part-4, 5, 6 & 7, should be placed in the grid module to form a false ceiling complete all as specified and directed. Make: Armstrong/ Saint Gobain/ Lafarge/ Everest.

Supply and fix factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45X85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Supply and fix factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed.

Supply and fix anodised powder coated (minimum thickness of powder coating 50 micron) aluminium frames for door, window , ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and directed.

Supply and fix anodised powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty in square/ rectangle not exc 0.5 sqm in each pane complete all as specified and directed.

Supply and fix 4.00 mm thick frosted sheet glass, ordinary quality and glazing with oil putty in square/rectangle n. exc 0.5 sqm in each pane complete all as specified and directed.

Supply and fix 300mm long aluminium alloy, anodised, sliding door bolts with hasps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

Suplly and fix 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

Supply and fix 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

Supply and fix 200mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

Supply and fix vitreous china wash down water closet pan (pedestal Pattern) white (excluding fixing bolts flusing cistern and flush pipe) including connection to drain (or out going pipe) and to flush pipe anti syphonage pipe incl cast iron P or S trap fixed on floor including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply and fix 10 litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and 32mm dia PVC flush pipe complete all as specified and directed.

Supply and fix health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and direted.

Material and labour for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over and including 15mm thick screed bed in cement mortar (1:6) including supply and fix over 20-25mm thick machine cut cuddapah stone slab of any size complete all as specified and directed.

Supply and fix counter top oval shaped wash hand basin of size 630mmx450mm fixed to granite/marble top slab, including cutting for and pinning in including 32mm dia waste fitings cast copper alloy chromium plated with long screwed shanks and flynuts flange and beded in red lead cement, 32mm dia PVC waste pipe of 800mm long complete all as specified and directed.

Supply and fix 15mm bore fancy type pillar tap cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

Supply and fix vitreous china urinals, Half stall type, white flat back complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), including 32mm dia CP waste coupling and CP Urinal spreader for fixing with 15 mm dia pipe and 32mm dia PVC waste pipe of 800mm long complete all as specified.

Supply and fix 15 mm bore CP fancy type stop valves, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both,ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply and fix 15mm bore stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

Supply and fix 15mm bore brass angle cock fancy type, chromium plated for iron pipe complete all as specified and directed.

Supply and fix 15mm bore fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fix PVC connection pipe 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

Supply and fix brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

Supply and fix sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Supply and fix soap dish, brass, chromium plated complete all as specified and directed.

Supply, hoist and fix 500 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

Supply and fix 25mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Material and labour for cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth complete all as specified and directed.

Supply and fix CPVC special brass fittings (extra over and above item No 106.00 above), 20mm outer dia brass elbow completete all as specified and directed.

Supply and fix CPVC special brass fittings (extra over and above item No 106.00 above), 20mm outer dia brass elbow reducer (3/4 to 1/2) completete all as specified and directed.

Supply and fix CPVC special brass fittings (extra over and above item No 106.00 above), 20mm outer dia brass Tee completete all as specified and directed.

Supply and fix CPVC special brass fittings (extra over and above item No 107.00 above), 25mm outer dia brass elbow completete all as specified and directed.

Supply and fix CPVC special brass fittings (extra over and above item No 107.00 above), 25mm outer dia brass Tee completete all as specified and directed.

Supply and fix CPVC special brass fittings (extra over and above item No 107.00 above), 25mm outer dia union complete all as specified and as directed.

Supply and fix gun-metal globe or gate valves 20 mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

Supply and fix gun-metal globe or gate valves 25 mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

Dismantling of 110/100/75mm dia PVC/ cast iron or reinforced concrete drain pipes with all fittings, jointed in cement mortar and taking out of trenches/ in wall if required complete all as specified and directed.

Supply and fix 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or in wall with stack clamp complete all as specified and directed.

Supply and fix 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or in wall with stack clamp complete all as specified and directed.

Supply and fix 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

Supply and fix 110 mm bore PVC (SWR) bends with access door any radius complete all as speified and directed.

Supply and fix 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

Supply and fix 75 mm bore PVC (SWR) bends with access door any radius complete all as speified and directed.

Supply and fix 110 mm bore PVC (SWR) vent cowl complete all as specified and directed

Supply and fix 75 mm bore PVC (SWR) vent cowl complete all as specified and directed

Supply and fix PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

Supply and fix 75 mm bore PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided including removing of rubish from site complete all as specified and directed.

Dismantling of structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

Separating, scraping and cleaning of reinforcement (demolition of concrete measured separately) complete all as specified and directed.

Material and labour for preperation of steel surface area to exposed old and new reinfocrement to the full circumferance and length of bar to form unbroken 40 micron thick film and applying one coat anti corrosive primer @ 0.25 liter/ sqm or as per manufacturers instruction complete all as specified and directed. Make: -Asian Paints Ltd / STP / Fosroc.

Material and labour for applying one coat of epoxy bonding agent @ 2.6 litres/ sqm or as per manufacturer's instructions to old concrete surfaces of columns, beams, chajjas and similar structural members complete all as specified and directed. Make: -Asian Paints Ltd / STP / Fosroc.

Supply and fix wire netting of galvanised steel wire of 0.71mm dia, size of mesh 25 mm, fixed to concrete surfaces as in destressed concrete surfaces by means of nails etc complete all as specified and directed.

Material and labour for non shrink cementitious micro concrete mixed with 12.5mm graded stone aggregate using Renderoc RG of FOSROC in ratio by weight (18 kg aggregate : 25 kg Renderoc RG) respectively as per manufacturer's instructions, laid in average thickness 50 to 120 mm in surface of beams, columns, chajjas, parapets and similar structural members including necessary water tight form work complete all as specified and directed. Make: -Asian Paints Ltd / STP / Fosroc.

Material and labour for spraying curing compound as per manufacturer's instructions on freshly casted concrete surfaces complete all as specified and directed. Make: -Asian Paints Ltd / STP / Fosroc.

Material and labour for vitrified ceramic double charged tiles (premium quality) 10mm thick, dark shade as approved, polished area of each tiles n. exc. 0.36 Sqm (square/ rectangular) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Supply and fix 50 mm bore GI tubes (medium grade) with all fitting and fixed complete to walls and ceilings or laid in floors and for railings complete all as specified and directed.

Refixing only in repair 50 mm bore steel tubing with and including all fittings and fixed to walls and ceilings or laid under floors and for railings in new or old position complete all as specified and directed.

Supply and fix stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

Material and labour for structural steel work as in compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. conforming to Fe-410-W (Gde-E quality-A) complete all as specified and directed.

Supply and fix structural steel work in tubular trusses/ railing to projected balconies/ supporting members to projected balconies including special shaped washer etc. complete using ERW or induction butt welded tubes complete all as specified and directed. Note:- Mild steel tubular section work shall be carried out for supports of cantilever balcony at second floor to 3rd floor)

Material and labour for structural steel work in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded conforming to Fe-410-W (Gde-E-250 quality-A) complete all as specified and directed.

Material and labour for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate ) as in foundation, filling and mass concrete complete all as specified and directed.

Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Material and labour for PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in concrete bed to drain pipe including packing under and haunching against the sides of pipe 110mm bore after they are laid and tested complete all as specified and as directed.

Supply and fix PVC (SWR) pipes 110mm bore double socketed in any length with rubber ring joints laid in trenches complete all as specified and directed

Cutting into existing manholes for connecting new drain pipe of dia 110/150/160mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) smooth finished, and reforming benching as required complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided including reinforcement cut as required to facilitate demolition and removing debries from site of work completeall as specified and directed.

Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars etc. including removing of unserviceable bricks and debris from site complete all as specified and directed.

Material and labour for brick work with fly ash bricks, modular size, straight or curved on plan exc 6m mean radius built in cement mortar (1:4) complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinch chrome primer complete all as specified and directed.

Materials and labour for cutting holes in brick walls bulit in cement mortar for inserting holdfasts and making good dismantled portion in cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate ) as required depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc. half brick but not exc. one brick complete all as specified and directed.

Material and labour for RCC (1:2:4) (nominal mix) type B-1 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Material and labour for RCC (1:2:4) (nominal mix) type B-1 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.

Material and labour for rubber moulded chequered cement concrete tiles of size 200 x 200 x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement & no pigment as in path / floors etc and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming one coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

Material and labour for 150mm thick PCC (1:2:4) type B-2 (using 40mm graded stone aggregate) as in floors, pavings etc and finish the surace fair and even complete all as specified and directed.

All as per item No. 158.00 here-in-before but for one five pins 5 Amps switch socket outlet point on independent board and -ditto-.

Supply and fix modular switch 1 way 6 amps, 1 module complete all as specified and directed

Supply and fix modular shuttered sockets 6 amps, 2/3 pin combined two module complete all as specified and directed.

Supply and fix LED tube light fitting 1 x 20W (+/- 5%), 220V, AC with extruded strip in thermally conductive material & extruded housing in optically efficient material milky white with system lumen efficacy > 120 lumen per watt minimum system 2300 - 2400 and chip, Integrated electronic driver, SMD based LED constant current supply with double sided connection to avoid short circuit and surge protection greater than 2.5 KV, IP 20 protection and CRI>80, Power factor > 0.95, THD less than 15%, correlated Colour temperature (CCT) of 6500K, Operating Voltage of 140 V to 270 V, frequency of 50Hz burning hours 50000 hours with comprises of CRCA pre coated metal housing complete all as specified and directed.

Supply and fix 300mm sweep steel body exhaust fan AC single phase 230/240 volt. 1400 RPM, heavy duty, ISI marked, along with metal blade powder coated metalic finish with GI sheet louvers, low noise including necessary electric connection with and including cutting/making opening having dia of the hole for 300mm sweep exhaust fan in any type of walls of any description with nut, bolt, washer and making good distrubed surfaces complete all as specified and directed.

Supply and fix sheet metal enclouser SPN DB 4 ways double door having facility to fix MCB in incomer and MCBs in outgoing, IP-43 type complete fitted with bus bars, neutral links, blanking plates complete all as specified and directed.

Supply and fix MCB SPN, 240 Volts, 40 amps, "C" series, breaking capacity 10 KA complete all as specified and directed.

Supply and fix MCB SP, 240 Volts, of 6 to 32 amps current rating, 10 KA breaking capacity "C" series complete all as specified and directed.

Supply and fix LED light fitting 1x10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix flameproof switch LM6 body, rotary switch, SP, 16 Amps , IP66 protection die cast aluminium alloy for ON/OFF light / fan point to operate on single phase 230 Volts, AC with termination box certified by CIMFR and PESO certified IS-2145 complete all as specified and directed. Make : Sudhir /Bajaj/ Crompton Greaves.

Supply and fix flame proof / weather proof LED 1 x 20W 4 feet 230 V tube light fitting with lumen output not less than 4000 Lumens, body made out of cast aluminium alloy LM6 construction certified by CIMFR, BIS & PESO including suitable electronic including necessary fixing arrangements and connecting up complete all as specified and directed. Make: Sudhir /Bajaj/ Crompton Greaves.

Supply, laying, connecting and testing XLPE insulated, PVC sheathed, armoured LT electric power UG cable (heavy duty with stranded aluminum conductor) of size 10 Sqmm, 2 core, 1100 Volts grade, confirming to IS-7098 (Part-I) laid through duct/ pipe / in trench etc. with cable glands & suitable size of aluminium lugs complete all as specified and as directed. Note : Earth work, brick protection and sand cushioning and GI Pipe Shall be measured and paid separately under respective item.

Supply and fix galvanised iron pipe 40mm bore (light grade) for protection of cable, laid in trenches / floors / fixing on wall / pole complete all as specified and as directed.

Material and labour for sand cushioning with clean and dry river sand for protection of PVC cable with approved sand of uniform thickness. laid dry, filling in trenches and punning down in proper required layers complete all as specified and as directed. Note:- Punned down thickness shall be measured for payment.

Materials and labour for brick protection cover to underground cables with sub class ‘B’ of size 23 X 11.5 X 7.5 cm, (locally available best quality), laid dry and flat abutting Each other with gaps not exceeding 10mm complete all as specified and as directed.

Supply and fix 25mm dia High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 for passing of cable through PCC foundation from trench to cable junction box with necessary clamp, nuts and bolts complete all as specified and directed.

Material and labour for cutting existing CI/GI/DI water supply line with the help of electric cutting tools or manually, reducing to required length before laying and blockage removal, cleaning of particular joint etc and making good after repairing of size upto 100mm including leakage testing complete all as specified and directed.

Material and labour for cutting existing 100mm dia CI/GI/DI water supply pipe line with the help of electric cutting tools or manually for insertion of new Tees 100 x 100 x 25mm, branches and saddle pieces with connected accessories and including necessary earth work and testing complete all as specified and directed.

Material and labour for 25mm bore (nominal) Gl tubing (medium grade) including all necessary pipe fittings and laid in trenches complete all as specified and directed.

Please Enable Macros to View BoQ information