Repairs to existing damaged drain at Sheikh Mohalla Kaloosa Ward no 12 from H/O Javid Iqbal Bhat .

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.

Clearance of silt,mud and chocking material(wet) from drains including disposal of same lead as per direction of Engineer-incharge/outside muncipal limits

Demolishing of old damaged cement concrete manually/by mechanical means including disposal of material lead as per direction of Engineer-incharge/outside muncipal limits: 1:3:6 or richer mix (i/c equivalent design mix)

Earth work in excavation in all kinds of soil by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed by site Engineer

Supply and filling of dry stone soling in foundation trenches/under floors tightly hand packed with hand ramming, dressing ,watering incld. carriage of material from source to site of work complete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1 Cement: 4 coarse sand: 8 grade stone aggregate 40mm nominal size) incld. carriage of material from source to site of work complete

Centering and shuttering including strutting propping etc. and removal of form for foundation, footings basses of columns etc . incld. carriage of material from source to site of work complete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:2:4 (1Cement: 2 coarse sand: 4 grade stone aggregate 20mm nominal size) incld. carriage of material from source to site of work complete

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and two or more coats of synthetic enamel paint using structural steel etc. as required for frame work, Iron trash guards using 65x65x 6 mm angle iron with RHS 50x25x4mm Tranverse with 2'gap including fixing in cement concrete as per directions of site Engineer and incld. carriage of material from source to site of work

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete, 40 mm thick with 20mm nominal size stone aggregate, incld. carriage of material from source to site of work complete