GENERALMaintenance of quarter C10 in GO quarters at Thevally, Kollam

Amount

Detailed estimate

OD14438/2023-2024:Supplying and fixing of aluminium mosquito net best quality with aluminium powder coated frame of size25.4x19.05x1.65mm, 25mm steel screws, etc. including fabrication and fitting charges etc.

OD14439/2023-2024:Supplying and fixing PVC hollow laminated bath room door of good quality single panelled section including cost of all fittings such as butt hinges, tower bolt, handles, conveyance, fitting charges etc.

17.18.1:Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete.10 litre capacity - White

18.51.1:Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)

17.20.1:Providing and fixing solid plastic Seat with lid for pedestal type W.C. pan complete:White solid plastic seat with lid

17.28.2.1:Flexible pipe32 mm dia

14.43:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

13.80:Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

14.54.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work

18.53.1:Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore

50.9.15.1:Supplying and fixing 200 mm Aluminium aldrop

9.65.1:Providing and fixing ISI marked oxidised M S door latches conforming to IS : 5930 with screws etc.300x20x6 mm

50.9.15.5:Providing and fixing iron hooks and eyes: 100 mm

50.17.1.1:Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

50.17.1.3:Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.

50.18.9.3.2:Providing and fixing PVC pipes includes jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm dia 10KGF/cm2

50.18.9.7.1:Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2

50.18.9.9.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2

50.18.9.20.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow

50.18.9.20.7:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia vent cowl

OD14441/2023-2024:Engaging man cooli

OD14442/2023-2024:Engaging plumber

OD14443/2023-2024:Engaging Carpenter(2nd class)

OD14444/2023-2024:Engaging scavenger

OD14445/2023-2024:Engaging blacksmith

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

OD14446/2023-2024:Providing Alu-zinc coated 0.35mm thick GI trafford sheet roofing including vertical/curved surface fixed with polymer coated) or l hooks, bolts and nuts 8mm diameter with bitumen and G.I limper washers or with G.I limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete(up to any pitch in horizontal/ vertical or curved surfaces), excluding the coat of purlins, rafts and trusses and including cutting to size and shape wherever required.

13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

OD24492/2023-2024:Cleaning the shubby and ceramic floor and wall tile with detergent and diluted hydrochloric acid etc.

OD24525/2023-2024:Constructing sewer manholes of 60cmx60cm inside and depth not exceeding 90 cm with 20mm thick walls of solid blocks in cement mortar 1:6 plastering inside with cement mortar 1:3,12mm thick with neat cement flushing coat and foundation concrete 15cm thick and forming channels with cement concrete 1:4:8 using 40mm brocken stone including all cost and conveyance of materials, labour charges etc. complete. (RCC cover slab not included).

OD24537/2023-2024:Supplying and placing 100 cm dia RCC precast slab 100mm thick with cement concrete 1:2:4 and placing in position etc complete.

RADHAKRISHNA PILLAI V

C.PRATHAPAN

Bidder Name

C.PRATHAPAN

RADHAKRISHNA PILLAI V

UNNI S