PR.NO. 395/24-25-Providing Motor Pumbset and water tank to Adupputty 30 veedu colony Drinking water project in ward 12

Amount

Motor Pumb set and water tank

OD149673/2024-2025:charges for pump lifting including all charges

OD149674/2024-2025:Charges for pump erecting including all charges

OD178377/2024-2025:Drilling 150 mm dia DTH bore well vertically suitable to accommodate well pipe of 180 mm dia PVC Pipe 6 kg/ cm2 for various depth up to150 m below ground level, having over burden 20 m or more in all classes of soil and rock inclusive of hire charge for machinery and all other accessories and stores putting up temporary sheds, conveying , lowering the casing pipe,jointing with coupling , developing and flushing continuously for 3 hours testing the discharge, , lowering dummy of the proposed Submersible motor pump set in the drilled bore well assuring the free movement of the same ceiling the casing pipe in the rock with cement grout, providing temporary cap if necessary as per the direction of departmental officers, including cost of fuel ,oil and other stores and all items incidental to the completion of work, including conveyance of casing pipe,coupling and dummy etc. but excluding the cost of casing pipe and specials etc. complete

OD149669/2024-2025:Supplying and erection of electrically driven best quality reputed makeISI marked , open well/bore well submerssible pump set having bronze impeller stainless steel shaft capable of discharging required lpm against a total required head including all accessories such aspanel board, main wsitch, suitable starter , suitable size of flat submerssible cable, wiring materials delivery pipe for open wellelectrification charges etc.complete.The warranty shall be for a minimum period of two years including all fittings. (delivery pipe up to 10m cable , foot valve, , panel board, with main switch , fuses,ELCB, starter, earthpipe etc. (As per KWA /HO/SP/333/2011/pumps/ tvm dated 20.12.2011)A-1 HP .Details for 1HP

18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

50.13.1:9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

aljovincent

Bidder Name

A.P.VINOD

aljovincent