CONSTRUCTION OF NEW CIVIC CENTER IN ANANADNAGAR FOR BHAVNAGAR MUNICIPAL CORPORATION, BHAVNAGAR

Name of Work :- Construction Of New CIVIC CENTER , ANANDNAGAR Bhavnagar(B.M.C.)

NAME OF DOCUMENT: SCHEDULE-B

Item Rate Total Amount

Item Rate Total Amount

Item Description Quantity Unit

Excavation for foundation upto 1.5 m depth including sorting out and

1 stacking of useful materials and disposing off the excavated stuff 1220.00 Cum. 255.14

upto 500 Meter lead.(A) Loose or soft soil

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting

2 out and stacking of useful materials and disposing off the excavated stuff 277.00 Cum. 303.84

upto 500 Meter lead.(B) Dense or Hard soil

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting

3 out and stacking of useful materials and disposing off the excavated stuff 499.00 Cum. 423.33

upto 500 Meter lead.(C) Hard Murrum

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting

out and stacking of useful materials and disposing off the excavated stuff

upto 500 Meter lead. (D) Soft rock not requiring

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand

5 : 4- graded stone aggregates 20 mm nominal size) and curing complete 401.00 Cum. 3922.84

including cost of formwork in (A) Foundation and Plinth

Providing and laying controlled cement concrete M250 work with curing

etc. complete including the cost of from workbut excluding cost of

Reinforcement for RCC work in (A) Foundation footing base of columns

and mass concrete.

Providing and laying controlled cement concrete M250 work with curing

7 etc. complete including the cost of from workbut excluding cost of 62.00 Cum. 7813.36

Reinforcement for RCC work in Column upto Plinth Level.

Providing and laying controlled cement concrete M250 work with curing

8 etc. complete including the cost of from workbut excluding cost of 24.00 Cum. 8322.40

Reinforcement for RCC work in RCC Wall upto ground Floor

Providing and laying controlled cement concrete M250 work with curing

9 etc. complete including the cost of from workbut excluding cost of 6.00 Cum. 8364.82

Reinforcement for RCC work in RCC Wall upto First Floor

Providing and laying controlled cement concrete M250 work with curing

10 etc. complete including the cost of from workbut excluding cost of 6.00 Cum. 8407.24

Reinforcement for RCC work in RCC Wall upto Second Floor

Providing and laying controlled cement concrete M250 work with curing

11 etc. complete including the cost of from workbut excluding cost of 5.00 Cum. 8449.66

Reinforcement for RCC work in RCC Wall upto Third Floor

Providing and laying controlled cement concrete M250 work with curing

12 etc. complete including the cost of from work but excluding cost of 90.00 Cum. 6,329.67

Reinforcement for RCC work in Ground beam

Brick work using common burnt clay building bricks having crushing

13 strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement 224.00 Cum. 4,279.98

Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional

Filling available excavated earth (excluding rock) in trenches.

14 plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth 2049.00 Cum. 137.47

consolidating each disposited layer by ramming and watering.

Filling in foundation and plinth with murrum or selected soil in layers of

15 20cm. thickness including watering, ramming and consolidating etc. 714.00 Cum. 304.60

Applying general insecticide pest control treatment to floors, cupboards

etc including labour material etc. complete. Using Heptachloride 20 EC.

As Per 6113_pests Consentration Weight 0.50 percent is recommended

16 one litre chemical emulsion dillute with 39 liter of water will give. Total 539.00 Sqm. 40.02

dillute concrentration will be 40 litre inclusive of one litre chemical

emulsion appication 0.5 Litre chemical / Sqm of surface is recommended

Providing and laying controlled cement concrete M250 work with curing

17 etc. complete including the cost of from work but excluding cost of 61.00 Cum. 7,813.36

Reinforcement for RCC work in Column (G.F.)

Providing and laying controlled cement concrete M.250 work with curing

18 etc. complete including the cost of formwork but excluding the cost of 37.00 Cum. 7,855.78

reinforcement for RCC work in Column (F.F.)

Providing and laying controlled cement concrete M.250 work with curing

19 etc. complete including the cost of formwork but excluding the cost of 37.00 Cum. 7,898.20

reinforcement for RCC work in Column (S.F.) Page 1 of

Name of Work :- Construction Of New CIVIC CENTER , ANANDNAGAR Bhavnagar(B.M.C.)

NAME OF DOCUMENT: SCHEDULE-B

Item Rate Total Amount

Item Rate Total Amount

Item Description Quantity Unit

Providing and laying controlled cement concrete M.250 work with curing

20 etc. complete including the cost of formwork but excluding the cost of 13.00 Cum. 7,940.62

reinforcement for RCC work in Column (T.F.)

Providing and laying controlled cement concrete M250 work with curing

21 etc. complete including the cost of from workbut excluding cost of 27.00 Cum. 6523.59

Reinforcement for RCC work in Coping.

Providing and laying controlled cement concrete M250 work with curing

22 etc. complete including the cost of from workbut excluding cost of 13.00 Cum. 7924.46

Reinforcement for RCC work in Lintel Ground Floor

Providing and laying controlled cement concrete M250 work with curing

23 etc. complete including the cost of from workbut excluding cost of 12 Cum. 7966.88

Reinforcement for RCC work in Lintel First Floor

Providing and laying controlled cement concrete M250 work with curing

24 etc. complete including the cost of from workbut excluding cost of 12.00 Cum. 8,009.30

Reinforcement for RCC work in Lintel Second Floor

Providing and laying controlled cement concrete M250 work with curing

25 etc. complete including the cost of from workbut excluding cost of 6.00 Cum. 8,051.72

Reinforcement for RCC work in Lintel Third Floor

Providing and laying controlled cement concrete M250 work with curing

26 etc. complete including the cost of from workbut excluding cost of 50.00 Cum. 8,029.50

Reinforcement for RCC work in Beam (G.F.)

Providing and laying controlled cement concrete M250 work with curing

27 etc. complete including the cost of from workbut excluding cost of 49.00 Cum. 8071.92

Reinforcement for RCC work in Beam (F.F.)

Providing and laying controlled cement concrete M250 work with curing

28 etc. complete including the cost of from workbut excluding cost of 49.00 Cum. 8114.34

Reinforcement for RCC work in Beam (S.F.)

Providing and laying controlled cement concrete M250 work with curing

29 etc. complete including the cost of from workbut excluding cost of 6.00 Cum. 8,156.76

Reinforcement for RCC work in Beam (T.F.)

Providing and laying controlled cement concrete M250 work with curing

30 etc. complete including the cost of from workbut excluding cost of 9.00 Cum. 7,115.45

Reinforcement for RCC work in CHAJJA AT GROUND FLOOR

Providing and laying controlled cement concrete M250 work with curing

31 etc. complete including the cost of from workbut excluding cost of 9.00 Cum. 7157.87

Reinforcement for RCC work in CHAJJA AT FIRST FLOOR

Providing and laying controlled cement concrete M250 work with curing

32 etc. complete including the cost of from workbut excluding cost of 9.00 Cum. 7,200.29

Reinforcement for RCC work in CHAJJA AT SECOND FLOOR

Providing and laying controlled cement concrete M250 work with curing

33 etc. complete including the cost of from workbut excluding cost of 1.00 Cum. 7242.71

Reinforcement for RCC work in CHAJJA AT THIRD FLOOR

Providing and laying controlled cement concrete M250 work with curing

34 etc. complete including the cost of from workbut excluding cost of 86.00 Cum. 6,575.10

Reinforcement for RCC work in SLAB (G.F.)

Providing and laying controlled cement concrete M250 work with curing

35 etc. complete including the cost of from workbut excluding cost of 80.00 Cum. 6,617.52

Reinforcement for RCC work in SLAB (F.F.)

Providing and laying controlled cement concrete M250 work with curing

36 etc. complete including the cost of from workbut excluding cost of 80.00 Cum. 6,659.94

Reinforcement for RCC work in SLAB (S.F.)

Providing and laying controlled cement concrete M250 work with curing

37 etc. complete including the cost of from workbut excluding cost of 6.00 Cum. 6,702.36

Reinforcement for RCC work in SLAB (T.F.)

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

38 Cutting, bending, binding and placing in position complete upto floor two 100000 Kg. 77.29

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

Cutting, bending, binding and placing in position complete at First floor

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

40 Cutting, bending, binding and placing in position complete at Second 33500.00 Kg. 79.43

Name of Work :- Construction Of New CIVIC CENTER , ANANDNAGAR Bhavnagar(B.M.C.)

NAME OF DOCUMENT: SCHEDULE-B

Item Rate Total Amount

Item Rate Total Amount

Item Description Quantity Unit

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

Cutting, bending, binding and placing in position complete at Third floor

Brick work using common burnt clay building bricks having crushing

strength not less than 35 Kg/ Sq.Cm. In Super Structure above plinth

level up to floor two level in cement mortar 1:6 (1 Cement: 6-Fine sand)

with curing etc. (b)Conventional. (G.F.)

Brick work using common burnt clay Building bricks having crushing

strength not less than 35 Kg/ Sq.Cm. In Super Structure above plinth

level up to floor two level in cement mortar 1:6 (1 Cement: 6-Fine sand)

with curing etc. (b)Conventional. for F.F.

Brick work using common burnt clay Building bricks having crushing

strength not less than 35 Kg/ Sq.Cm. In Super Structure above plinth

level up to floor two level in cement mortar 1:6 (1 Cement: 6-Fine sand)

with curing etc. (b)Conventional. for Second Floor

Brick work using common burnt clay Building bricks having crushing

strength not less than 35 Kg/ Sq.Cm. In Super Structure above plinth

level up to floor two level in cement mortar 1:6 (1 Cement: 6-Fine sand)

with curing etc. (b)Conventional. for Third Floor

Half brick masonry in common brunt clay building bricks having crushing

strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement :

4 -coarse sand ) in foundation and plinth (B) Conventional (upto 10 ton)

Half brick masonry in common brunt clay building bricks having crushing

strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement :

4 -coarse sand ) in foundation and plinth (B) Conventional (upto 10 ton)

FOR FIRST FLOOR

Half brick masonry in common brunt clay building bricks having crushing

strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement :

4 -coarse sand ) in foundation and plinth (B) Conventional (upto 10 ton)

FOR SECOND FLOOR

Providing and fixing FRP frame size 100x50 mm and 28mm thick FRP

depress panel shutter having extra reinforcement on sides & edges in

Gel coat finish. The core of the shutter & frame is to be filed up with

injected fire retardant grade polyurethene foam done in situ alongwith

49 embedded wooden pieces for stiffening & also taking hinges & fintures. 31.00 Sqm. 2377.76

The whole FRP frame & shutter is to be water proof weather proof,

termite proof & resistance to mild acid/alkali. Rates are to be inclusive of

S.S hinges with necessary screws & alluminium fixtures & fastenings &

fastener sleeve

roviding and fixing window having extruded aluminum Colour anodized

section frame main outer size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg /

Rmt, horizontal two track member size 61.85 mm x 31.75 mm x 1.20mm

@ wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x 31.75mm x

1.30 mm @ wt.of 0.659 Kg/mt with sliding shutters of horizontal member

size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical member of

size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, @ Wt. 0.457 Kg/mt

with 5 mm thick transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details etc complete for window.

Providing and fixing standared extruded of alluminium section of size

63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized

alluminium frame for ventilation with 5 mm thick frosted glass as details

etc complete for Ventilation

Providing and fixing M.S. grills of required pattern to marble/granite

frames of window etc. with M.s. flats at required spacing and frames

alround, square or round bars fixed with round headed bolts and nuts or

by screws, including oil painting with one coat of primer of approved

quality and brand & two coats of synthetic enamal oil paint etc. complete

as per detail drawing and as directed by Engineer in charge.

Providing 10 mm thick cement mala plaster on ceiling and soffits of

53 stairs for interior upto floor two level, in cement mortar (1:4) (1 cement : 4 895.00 Sqm. 147.94

sand) etc complete. Ground floor

Name of Work :- Construction Of New CIVIC CENTER , ANANDNAGAR Bhavnagar(B.M.C.)

NAME OF DOCUMENT: SCHEDULE-B

Item Rate Total Amount

Item Rate Total Amount

Item Description Quantity Unit

Providing 10 mm thick cement mala plaster on ceiling and soffits of

54 stairs for interior upto floor two level, in cement mortar (1:4) (1 cement : 4 845.00 Sqm. 172.76

sand) etc complete. First floor

Providing 10 mm thick cement mala plaster on ceiling and soffits of

55 stairs for interior upto floor two level, in cement mortar (1:4) (1 cement : 4 845.00 Sqm. 197.58

sand) etc complete. Second floor

Providing 10 mm thick cement mala plaster on ceiling and soffits of

56 stairs for interior upto floor two level, in cement mortar (1:4) (1 cement : 4 55.00 Sqm. 222.39

sand) etc complete. Third floor

Providing 15 mm thick cement mala plaster in single coat on fair side

bricks/concret walls for interior plastering up to floor two level finished

even and smooth in cement mortar 1:4 (1 cement : 4 sand) etc

complete. Ground Floor

Providing 15 mm thick cement mala plaster in single coat on fair side

bricks/concret walls for interior plastering up to floor two level finished

even and smooth in cement mortar 1:4 (1 cement : 4 sand) etc

complete. Frist Floor

Providing 15 mm thick cement mala plaster in single coat on fair side

bricks/concret walls for interior plastering up to floor two level finished

even and smooth in cement mortar 1:4 (1 cement : 4 sand) etc

complete. Second Floor

Providing 15 mm thick cement mala plaster in single coat on fair side

bricks/concret walls for interior plastering up to floor two level finished

even and smooth in cement mortar 1:4 (1 cement : 4 sand) etc

complete. Third Floor

20mm.thick sand faced cement plaster on walls upto height 10 meters

above ground level consisting of 12mm. Thick backing coat of CM.1:3 (1-

cement:3-sand) and 8mm.thick finishing coat of C.M. 1:1 (1-cement:1-

sand) etc. complete.

Providing throating or plaster drip and moulding to R.C.C. Chajja

63 Prov.20mm deep finished groove etc.comp 1,837.00 Rmt 27.27

Providing and fixing chicken wiremesh jali at R.C.C. masonry joints at

any height with all labour & material etc. complete.

Applying two coats of birla(White cement based) or Asian (acrylic lappy

putty) or equivalent two coats of primer of approved brand and

65 manufacture on new wall surface to give an even shade including 5,690.00 Sqm. 40.59

thoroughly brushing the surface free from mortar dropping and other

matter foreign and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

Finishing wall with 100% Acrylic Smooth exterior paint of required

shade : Two or more coat applied @ 1.67 ltr/10 sqm over and including

67 priming coat of exterior primer applied @0.90 litre/10 sqm to give an 1,400.00 Sqm. 360.57

required shape even shade after thoroughly brushing the surface to

remove all dirt, and remains of loose powdered materials. etc complete

Providing cement vata, 10 cm. x 10 cm. size, quarter round in cement

mortar 1:1 including neat cement finishing, watering, etc. complete.

Providing and laying Lather finished granite stone slab 18mm thick in

flooring treads of steps and landing laid on a bed of 12mm thick cement

mortar 1:6 (1-Cement : 6-Coarse Sand) finishing with full molded round

edges, flush pointing in white or colour cement.

Providing and laying polished Granite Slab 18mm thick in Risers of steps

Dedo, window sill, jembs and pillars laid 10mm thick Cement Mortar 1:3

(1-Cement : 3 coarse sand and jointed with Grey Cement Slurry including

full molded round front edges , rubbing and polishing etc. complete.

Name of Work :- Construction Of New CIVIC CENTER , ANANDNAGAR Bhavnagar(B.M.C.)

NAME OF DOCUMENT: SCHEDULE-B

Item Rate Total Amount

Item Rate Total Amount

Item Description Quantity Unit

Providing and laying chaina mosic water proofing treatment on terrace

including applying neat cement slurry 2.75 Kg./Sqm. Of cement admixed

with water proofing compound after cleaning the surface (b) laying

cement concrete usig brick bats 25 to 100 mm size with 50% C.M. 1:5 (1

cement : 5 coarse sand) admixed with water proofing compound over

mm thick layer of C.M. 1:5 to required slope including rounding of

junction of walls and slabs (a) after two days of proper curing applying a

second with 20 mm thick C.M. 1:4 and china mosaic tiling and finally

finishing the surface with trowel white cement slurry (e) after finishing the

whole terrace shall be flooded with water for two weeks.

Providing and laying water proofing treatment on roofs of slabs by

applying cement slurry mixed with water proofing cement compound

consisting of applying: (a) after surface preparation, first layer of slurry of

cement @ 0.488 kg/ sqm mixed with water proofing cement compound @

0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first

layer is still green. Overlaps of joints of fibre cloth should not be less than

10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement

@ 1.289 kg/sqm mixed with water proofing cement compound @

kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure

for 4 hours followed by water curing for 48 hours. The entire treatment will

be taken upto 30 cm on parapet wall and tucked into groove in parapet all

around. (d) fourth and final layer of china mosaic (which will be paid for

separately. For the purpose of measurement the entire treated surface

will be measured.

Providing and laying Vitrified tiles 8 to 10 mm thick , 36'' x 36'' in flooring

treads of steps and landing laid on a bed of 12mm thick cement mortar

1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white

Providing and laying Vitrified tiles 8 to 10 mm thick , in skrting risers of

74 steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse 39.00 Sqm. 1592.40

sand) and jointed with white cement slurry

Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x

8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo

on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed

with white cement slurry.

Providing and laying Ceramic tiles 6mm thick in flooring treads of steps

76 and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 147.00 Sqm. 1015.78

3-coarse sand ) finishing with flush pointing in white cement.

Providing and Fixing 90 cm high stainless steel railing made from

anticorrosive 304 grade S.S. Staircase Railing modular type welded fitting

(S-Rail SR11 Square Type Steel Baluster),Main hand Rail pipe (DASA

Pipe) 50mm outer dia 1.6 mm Thickness SS 304 Grade, Balustar steel

77 square type 32X32mm outer dia. 1.6mm thickness ss 304 pipe, 3 pipe 64.00 Rmt 3954.93

below main dasa pipe 16 mm outer dia. 1.6mm thickness ss304 grade

as a vertical support fixed in RCC S.S. pipe with steel modular type fitting

baluster including all type accessories as per detailed drawing as directed

etc. complete for all floors.

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling

and filling the joint with sand in proper line and level as per guidlines of

IRC : SP 63-2018 etc.Complete.

79 Water conection with necessary fitting 1.00 job 2020.00

80 Drainage conection with necessary fitting 1.00 job 2020.00

Takti for Inauguration with naming as directed by architect or EIC.

Water supply,Sanitary & Drainage work

Providing and fixing wsh down water closet (European type, W.C. Pan)

with integral P or S trap including jointing the trap with soil pipe in Cement

Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and

paid for separately)(A) vitreous China Pattern :(i) in white colour

Providing and fixing plastic seat and cover for wash down water closer

83 Page 5 of 19 9.00 Each 291.33

with C.P. brass hinges and rubber buffers.

Name of Work :- Construction Of New CIVIC CENTER , ANANDNAGAR Bhavnagar(B.M.C.)

NAME OF DOCUMENT: SCHEDULE-B

Item Rate Total Amount

Item Rate Total Amount

Item Description Quantity Unit

Providing and fixing washbasin with single hole for pillar tap with C.I. or

M.S. brackets painted white including sutting holes and making good the

same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin

550 mm x v 400mm size. (i) In white colour.

Providing and fixing C.P. brass waste for washbasin or sink. (B) 40mm

Providing and fixing M.I. fisher union for washbasin or sink. (B) 40mm dia

Providing and fixing chromium plated, bottle trap with necessary

couplings of approved quality for wash basin.

Providing and fixing Urinal or approved quality including conecting the

88 Urinal with waste pipe , tap etc. complete.(A) White earthenware flat back 12.00 Each 1036.27

or corner type size 430mm x 260mm x 350mm.

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior

89 glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to 9.00 Each 833.73

wooden pluge with C.P. brass screws and washers.

Providing and fixing C.P. brass towel rail comlete with C.P. brass

90 brackets fixed to wooden plugs with C.P. brass scews.(B) 600mm x 9.00 Each 603.19

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm

diameter with jali of the following nominal diameter of self cleansing

design with C.I scread down or hinged grating including the cost of

cutting and making good the walls

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working

pressure polythene pipes of the following outside Dia. Low densidy,

complete with special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and floor.(F) 75mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working

pressure poluthene pipes of the following outside Dia. Low densidy,

complete with special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and floor.(G)110 mm

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight.(i) Square mouth traps.(B) 150mm x 100mm

size P or R type

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x

610mm intenal dimensions total weight of cover with frame to be not less

than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete.(i) Inside dimensions

455mmx 610mm and 450mm deep for single pipe line.

Providing laying and jointing in true line and level 15mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials

Providing laying and jointing in true line and level 25mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. Page 6 of

Name of Work :- Construction Of New CIVIC CENTER , ANANDNAGAR Bhavnagar(B.M.C.)

NAME OF DOCUMENT: SCHEDULE-B

Item Rate Total Amount

Item Rate Total Amount

Item Description Quantity Unit

Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete.[A] 15 mm

Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

100 potable water of following dia. nominal bore tube fittings and clamps 90.00 Rmt 249.72

including making good the wall, ceiling and floor etc. complete. [C]

Providing and fixing screw down bib taps of following size.(A) Brass

screw down bib tap polished bright. (i) 15mm dia.

5 Providing and fixing pillar tap, capstan head, screw down high pressure

with screws, shanks and back nuts. (i) 15mm dia.

103 Providing and fixing brass screw down stop tap.(A) 15mm dia 21.00 Each 205.83

Providing and fixing chromium plated brass half trun flush cock of

approved quality including fixing in pipe line etc. complete.(ii) 25mm dia.

Providing and fixing ball cock of approved. quality as directed.(A) Copper

Metal (i) 25mm dia

Providing and fixing in position cowel went to pipes.(B) 75mm dia

Providing and fixing in position cowel went to pipes.(C) 100mm dia

Providing erecting and fixing double coated ISI water tank of required

108 capacity each with all necessary fittings and connection etc. complete on 6,000.00 litre 3.95

Providing, supplying, laying and planting different kinds of plants/ shrubs/

ground cover ( 7nos per sq.mt) in suggested area including with

necessary excavation minimum depth 0.30 mt as directed by Architect,

109 filled with good quality garden soil required for plants,curing,required FYM 109.00 Sqm. 770.63

farm yard manure, for flower bed etc.complete at all level,heights as per

design and directed by ARCHITECT(Notes. please minimumm height of

all plants not less then 0.45 to 0.60 mt )

Providing, supplying, laying and planting bohemia of height 10' - 12', bag

size 21" X 21", and the a trunk size of 6" are in suggested area with

110 necessary garden soil required for plants, curing, required manure, 20.00 No 1647.31

forflower bed etc. complete at all level, heights as design and directed by

Providing, supplying, laying and planting gulmahor of height 10' - 12', bag

size 21" X 21", and the a trunk size of 6" are in suggested area with

111 necessary garden soil required for plants, curing, required manure, 15.00 No 1647.31

forflower bed etc. complete at all level, heights as design and directed by

Providing, supplying, laying and planting kadam of height 10' - 12', bag

size 21" X 21", and the a trunk size of 6" are in suggested area with

112 necessary garden soil required for plants, curing, required manure, 15.00 No 1647.31

forflower bed etc. complete at all level, heights as design and directed by

Providing, supplying, laying and planting lymosyth (borchhalli) of height

10' - 12', bag size 21" X 21", and the a trunk size of 6" are in suggested

113 area with necessary garden soil required for plants, curing, required 15.00 No 1647.31

manure, forflower bed etc. complete at all level, heights as design and

directed by ARCHITECT

ELECTRICAL ITEM

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below type of pipe rected

with 6A Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white ront

plate modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed

on wall/ceiling complete Cat. III

Name of Work :- Construction Of New CIVIC CENTER , ANANDNAGAR Bhavnagar(B.M.C.)

NAME OF DOCUMENT: SCHEDULE-B

Item Rate Total Amount

Item Rate Total Amount

Item Description Quantity Unit

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green)

both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand

copper wires, in following type of pipe to be erected concealed in /

flushed on wall/ceiling complete with 6A Modular type switch and hum

free EME four or more step type electronic fan regulator with separately

115 mounted and accessories with earth continuity of following type erected 42.00 Pt. 606.00

on PVC / Metallic box, single mounting base frame covered with

textured/metallic front plate modules erected on / in wall / ceiling as per

pipe erected. with necessary ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic box, single mounting base frame covered with

116 textured / metallic front plate modules erected on / in wall / ceiling with 72.00 Pt. 242.40

following type accessories

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm &

earthwire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in following type of pipe to

be erected concealed in / flushed on wall/ceiling ,complete with 6A

Modular type switches and following type of accessories erected on PVC

117 / Metallic box, single mounting base frame covered with textured / 50.00 Pt. 535.30

metallic front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary batten/angle holder or ceiling rose or

H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected concealed

in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

118 insulated stranded wire of green colour for earth continuity of following 700.00 Mtr. 80.80

( c) with oval conduit /pvc casing capping double lock type

(b) 2 wire 2.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected in / on wall /

ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size

(a) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm

Approved make ELCBs / RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and

suitable for operation on 3 phase and neutral 415V. having characteristic

120 of quick action & tripping with all advance feature & do not incorporate 5.00 Ea. 3585.50

any electronic component for following Max. rating erected as directed.

(iii) 63 Amps. FP

Providing and erecting Approved make Ceiling fan with double ball

bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep

121 complete, canopy and 30 cms. down rod erected on existing hook or 42.00 Ea. 1717.00

clamp with 24/0.2 , 3 core flexible wire with earthing. [Make shall be

approved by Engineer in charge]

Providing & erecting fresh air fan 250 mm dia with square frame make of

122 ABS body with louvers 9.00 Ea. 1838.20

Point wiring for on board Looped Plug with 6A Modular type switch &

pin socket erected on PVC / Metallic/Wooden box, single mounting

123 base frame covered with textured / metallic/white front plate 25.00 Pt. 283.81

modules erected on / in wall / ceiling with following type

accessories Cat. III

Name of Work :- Construction Of New CIVIC CENTER , ANANDNAGAR Bhavnagar(B.M.C.)

NAME OF DOCUMENT: SCHEDULE-B

Item Rate Total Amount

Item Rate Total Amount

Item Description Quantity Unit

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

124 MCB to house appropriate nos. of MCBs.(The DBs should be used of 120.00 Ea. 1044.34

same company of MCB to be used) suitable for (A) single phase

incoming and horizontal single phase outgoing (b) sheet steel double

door (IP-43) (ii)6 way

providing and erecting Approved make RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component. for following Max.

rating erected as directed (i) 25 Amps.DP Cat. III

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S.

126 Pipe down rod erected duly painted for fan complete with necessary 24/ 42.00 Ea. 126.25

O.20, 3 core flexible wire with earthing.

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming

to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name 160V to

270V,Power Factor more than 0.95, THD < 15 %, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges

(A) Square/ Circular shaped Surface/Recessed Mount Downlight

with provision for spring loaded mounting clips complete.IP20

(i) 5-9 watts,Surge-2 KV

Providing & erecting fresh air fan 250 mm dia with square frame

make of ABS body with louvers.Cat.II

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at road crossing or

floor of following size of cable.(A) 3 core 2.5Sq. Mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling,

with 1.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size (A) With

medium class Rigid PVC pipe and accessories.(b) 2 wire 2.5 sq. mm

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

132 connecting accessories of same material at required depth for laying of 500.00 Mtr. 72.72

cable. below ground / road surface for enclosing cable and back filling

the same to make ground as per original.(a) 90 mm

Name of Work :- Construction Of New CIVIC CENTER , ANANDNAGAR Bhavnagar(B.M.C.)

NAME OF DOCUMENT: SCHEDULE-B

Item Rate Total Amount

Item Rate Total Amount

Item Description Quantity Unit

Supplying and erecting approved make Octagonal pole made from HR

sheet steel. The pole should be made as per IS. and shall be coated with

hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local

wind speed with integral Junction box consist of terminal plate of min

6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and arrangement for cable termination to

be erected With Suitable foundation (Included) as per details given by

manufacturer considering site requirement.

(B) 4 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-M16 Bolts and 450mm long with 10.00 Ea. 6554.90

necessary G.I. J Bolts .Approx weight 37 kg

Providing and erecting C.I./M.S. flange type base plate of 300mm x

Providing and erecting Street Light pole bracket comprising main B Class

GI pipe of 4.2 cm/require outside dia. complete with suitable B Class G.I.

sleeve tubing of approx. 45cms.length and suitable for 76.5 mm /80mm

/ required size of pole top having sufficient fasteners for fixing the

135 brackets and having spread of 1.5.mtr. length with 110 deg.with vertical 10.00 Ea. 805.98

plane & suitable welded stays, reducer and with check nuts complete

painted with one coat of Red oxide / PU base primer and two coats of

Aluminium / PU paint. paint with following nos of arms. [A] Single Arm

Bracket 1.5 Mtr

ProvidingM-20/1:2:4 cement concrete foundation & 70% PCC from

bottom including excavation for the pole of size 45 x 45 x 100 cms. Deep

136 in below ground level with plinth of 45cms x 45cms (or 45cms dia x 15.00 Ea. 953.44

45cms) high upper ground level wit hnecessary curing and finishing in

approved manner.( for 4 & 6 mtr pole)

Decorative Down ward type Light Fixture having size of width of 435mm

&amp; Height.700mm Made out of specially spun aluminum top

housing and MS pipe Supporting arms with mounting base, Acrylic

Material Cover. The fixture is completely wired with 36W 3K/4K/6K LED

&amp; driver light.

Make: B ART, Gruhudhyog.

Decorative Victorian type Aluminium Casted Hexagoan type light fixture

over all Ht.17" top dia 12" & having socket for 60mm dia pipe, screws

138 bolts for fixing.Incl.top cover with Acrylic cover, B22 holder suitable for 15.00 Each 3193.62

12/18 Watt.including LED bulb 18 Watt, black paint finish complete.

Make: B ART, Gruhudhyog.

Supplying & erecting approved make time switch with single pole

airbreak contacts suitable for 230 V.15/16A.complete with self starting

139 motor driven clock ‘ON’ &’ OFF’ automatic arrangement at any 15.00 Each 2895.67

predetermined time during each 24 hours,With nickel cadmium

rechargeable battery backup erected as directed.

Providing and erecting required size HOT deep Galvanised iron strip for

140 earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. 15.00 Each 90.90

using proper clamp.

Providing and erecting HOT deep Galvanised iron strip wire 8 to

Name of Work :- Construction Of New CIVIC CENTER , ANANDNAGAR Bhavnagar(B.M.C.)

NAME OF DOCUMENT: SCHEDULE-B

Item Rate Total Amount

Item Rate Total Amount

Item Description Quantity Unit

Supplying & erecting in earthpit of minimum bore dia. 225mm size ASH

or approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free G.I.Pipes having

Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe

dia of 40 mm having 200-250 Micron galvanising, connection terminal

dia of 14 mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for panel

earthing.[A] For electrical installation up to 440 V (c) For Electrical

Installation covering Transformer Neutrals, Lightning arrester Earthing,

A.C.Plant & Sensitive Computer System(like Automation, SCADA) i.e

independent Earthing in normal soil. Length of Pipe : 2.00 mtrs Back

filling Compound :2 nos Bags of 25 Kg.

Providing one bag of 25 Kg. Additional Back Filling Compound (BFC)

suitable for safe earthing device.

Providing and erecting Pipe type earthing having 150 cms.long and

144 cms. dia. galvanised iron pipe with coupling and buch buried in specially 4.00 Each 434.30

prepared earth pit complete with necessary 8 SWG earth wire.

providing and erecting Approved make ELCBs / RCCBs conforming to IS:

12640 and having sensitivity of 30 mA and Short Circuit withstand

capacity of 10 KA and suitable for operation on 3 phase and neutral

415V,50Hz. having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic component for

following Max. rating erected as directed. (ii) 40Amps. FP Cat. III

SITC of 2 Megapixel up to 20 meter IR IP66 ,Varifocal ,Water Proof

outdoor type Bullet IP netwrok Camera : Up to 2 megapixel high

146 resolution Full HD1080p video Dual stream with 4mm lens - 3D Digital 4.00 Each 7515.41

Noise Reduction3-axis adjustment DC12V Support H.265+ with all

required acceesories.

Supply, Installation, Testing & Commissioning of 16 port NVR

Supply, Installation, Testing & Commissioning of 8 port POE Switch

Supply, Installation,Testing & Commissioning of 8 TB Hard Drive

Supply, Installation,Testing & Commissioning of 4U Rack With Required

Accessory. Outdoor or Indoor

Supplying & erecting approved make LAN cable of following size in

existing pipe as per direction [C] CAT -

152 Supply and Installation of HDMI CABEL. 18.00 Rmt 155.54

Supplying and erecting Flexible PVC insulated multi strand multi core

153 1.1 kv grade ISI marked copper wires of following size to be erected as 18.00 Rmt 197.96

directed. (k) 4.00Sq.mm 4 core round PVC sheathed

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth continuity of

following size. (A) with medium class Rigid PVC pipe and accessories. (i)

4 wire 10 sq. mm (use earth wire of 4 sq.mm )

Name of Work :- Construction Of New CIVIC CENTER , ANANDNAGAR Bhavnagar(B.M.C.)

NAME OF DOCUMENT: SCHEDULE-B

Item Rate Total Amount

Item Rate Total Amount

Item Description Quantity Unit

Supplying & erecting IP 55 grade following size section pillar fabricated

from joint less M.S. Sheet with angle iron legs made from jointless M.S.

Angle with cable clamps to be buried in ground to have appropriate

erection to work uniform until erected with cement concrete

foundation and 45 cm high bricks work finishing with plaster etc. hinged

double door internally supported on both side, with internal and

outside looking arrangement with look and keys in duplicate 35 x 35 x

mm M.S. Angle of Two Nos. one is welded and other with nut and bolt

for erecting Bakelite sheet. Painting the Section Pillar inside and out

side with three tank powder coated paint. section pillar roof should be

without joint with water leakage proof & tested as per IP 55 test &

followed by IS 2147 of 1962. (B) 75 X 60 X 45 cm section pillar fabricated

from 16 Gauge MS Sheet with angle iron legs 45 cm long made from

X 35 X 5 mm thick MS angle.

Supplying and erecting nuwood 12 mm thick on existing angle iron

Supplying & erecting approved make Digital time switch having lithium

cell 6 years operative and operate battery backup 1 channel day clock

with 14 memory programme, suitable to operate on 240V + 5%, 16A

with, floating contacts Minimum switching setup time 1 minimum &

LCD display. Also comprised permanent ON/OFF switching.

Programming switches & housed in fire proof thermoplastic enclosure &

transparent cover erected as required with necessary connection

erected as directed.

EXTERIOR CEMENT TEXTURE FINISH: Providing and applying exterior

cement-based textured finish on external walls, using ready-mixed

cement texture coating (Monokrete of Suzuka® or equivalent approved

make) in approved shade and texture, including preparation of surface

by cleaning, removing loose particles, dust, oil, grease and

efflorescence, making good minor cracks and undulations, applying two

coats of approved primer, followed by application of cement texture

coat using stainless steel trowel to obtain uniform concrete / polished

cement texture finish, including rubbing, pattern formation and

leveling, and finally applying protective topcoat / sealer by roller as per

manufacturer’s specifications, complete with all materials, labour, tools,

scaffolding, curing, surface protection and incidentals, complete in all

respects as per drawings, specifications and directions of Engineer-in-

Name of Work :- Construction Of New CIVIC CENTER , ANANDNAGAR Bhavnagar(B.M.C.)

NAME OF DOCUMENT: SCHEDULE-B

Item Rate Total Amount

Item Rate Total Amount

Item Description Quantity Unit

Providing, supplying and fixing Natural Brick Cladding tiles of size

approximately 60 × 215 mm and thickness 15 mm, made of concrete, in

natural finish, on internal or external vertical wall surfaces, including

preparation of base surface by cleaning, removal of loose particles,

dust, oil and grease, fixing the tiles using approved cementitious /

polymer-modified tile adhesive suitable for vertical applications,

maintaining proper line, level and alignment, providing uniform joints

159 and pointing the same with matching grout, including cutting, shaping, 941.00 Sqm 3022.93

finishing at edges, corners, openings, scaffolding, tools, labour and all

incidental works, complete in all respects as per manufacturer’s

specifications, drawings and directions of Engineer-in-Charge.

Natural Brick Cladding Code 15640 – 60×215 mm, concrete, 15 mm thick

by MyTyles, or equivalent approved make.

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M200 grade

160 concret as per approved design and including excavation for fixing in 235.00 Rmt 412.13

proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand)

Providing and laying 19 to 20mm thick DHOLPUR stone flooring

cement mortar 1:3 (1 cement :3coarse sand) laid over and jointed with

grey / white cement slurry with matching color of stone including half

roundnosing, rubbing and polishing etc complete.

Surface dressing of the ground including removing trees, vegetation and

162 making surface levelled and disposal of rubbish outside premises to an 2400.00 Sqm 5.91

unobjectionable place, as directed by the Engineer in Charge.

Providing and fixing 35 mm thick shutters for Doors, windows and clear

163 story windows including anodised alluminium butt 70.00 Sqm 4101.06

hinges with necessary screws.(A) Indian Teak Wood (1) Fully Panelled

Providing, laying and jointing in true line and level 160 diametre U.P.V.C

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed

with each other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 160 mm diametre x 210 mm length x 196 mm

eigh at every 2000 mm center to center or shall be concealed in walls as

directed including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

Filling in plinth with sand under floors including watering ramming,

consolidating and dressing complete

(i) Uncoursed Rubble Masonry with hard stone of approved quality in

166 foundations and plinth in Cement Mortar 1:6 (1-cement : 6-coarse sand 250.00 Cum 2592.84

including levelling up etc. complete

Providing and fixing water closet squatting Pan (Indian type W.C. Pan)

size 580mm (Earthwork, bed concrete, foot reste and trap to be

measured and paid for separately) (A) Vitreous China.(I) Long pattern =

Name of Work :- Construction Of New CIVIC CENTER , ANANDNAGAR Bhavnagar(B.M.C.)

NAME OF DOCUMENT: SCHEDULE-B

Item Rate Total Amount

Item Rate Total Amount

Item Description Quantity Unit

GRID FALSE CEILING :- P&F Perforated ceiling 600 x 600 mm with grid

section (24/15mm) with semi recessed / micro look joints, NRC : 0.9,

Fire resistance : Class-A, as per design, with 50 mm. rockwool, inclusive

of fixing, labour and all other required acessories etc complete as per

the company specifications and guidelines (ECOTONE / GYPROC /

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA

polyester powder coated and high U.V. & corrosion resistance with

diffuser and/or Polycarbonate optics with company mark/name

120 to 300 V,Power Factor more than 0.9, THD < 10 %, CCT 4000 K to

6500K, Uniformity ratio >0.7, Luminaire efficacy> 85 lumens/watt , LED

driver efficiency > 85 %, HYBEC / PHILIPS Lumileds /OSRAM /

Bridgelux(U.S.A.) make LED used for luminaire.

(D) LED Panel Light with provision for Plane front frame with translucent

cover fixed to housing complete.

(f) upto 36 watts, 600 x 600 mm, Surge- 4KV CAT III

Providing, supplying, fabricating and installing single-seater workstation

table with glass partition, of approved design and finish, comprising

table of size 1.20 m × 0.60 m, manufactured from 18 mm thick IS

grade MR plywood of approved make Euro / Greenply / SRG or

equivalent, finished with 1.0 mm thick decorative laminate of approved

shade and make like, Greenlam, Merino, Centurylam Etc. All exposed

edges finished with seasoned hardwood edge lipping with melamine

polish. Providing one pedestal with three drawers mounted on heavy-

duty telescopic drawer channels of Suzu / Hettich / equivalent approved

make, drawer fronts laminated and internal surfaces finished with

mm thick white laminate. Providing and fixing glass partition mounted

in wooden frame made of MR plywood, with 10–12 mm thick

toughened clear / frosted glass fixed with gaskets and sealant, complete

including all hardware, fittings, adhesives, cutting, assembling,

polishing, transportation and fixing at site, complete as per drawings

and directions of Engineer-in-Charge.

Name of Work :- Construction Of New CIVIC CENTER , ANANDNAGAR Bhavnagar(B.M.C.)

NAME OF DOCUMENT: SCHEDULE-B

Item Rate Total Amount

Item Rate Total Amount

Item Description Quantity Unit

Providing, supplying, fabricating and installing executive table with back

cupboard of approved design and finish, complete in all respects as per

drawings and directions of Engineer-in-Charge. Front table of size

m (L) × 0.60 m (W) with standard working height, made of 18 mm thick

IS 303 grade MR plywood of approved make Euro / Greenply / SRG or

equivalent, finished with 1.0 mm thick decorative laminate of approved

make Merino / Greenlam / CenturyLam or equivalent. All exposed

edges finished with seasoned hardwood edge lipping with melamine

polish. Front table provided with four drawers mounted on heavy-duty

171 telescopic drawer channels of Suzu / Hettich or equivalent, drawer 17.00 Each 45625.74

internal surfaces finished with 0.8 mm thick white laminate. Providing

and fixing stainless steel leg rest rod / pipe neatly finished and firmly

fixed. Back cupboard of size 1.50 m (L) × 0.55 m (D) × 0.90 m (H) made

of 18 mm IS 303 grade MR plywood, externally finished with 1.0 mm

thick decorative laminate and internally finished with 0.8 mm thick

white laminate, provided with shutters, internal shelves suitable for file

storage and locking arrangement, including all hardware, fittings,

cutting, assembling, polishing, transportation and fixing at site,

complete as per drawings and directions of Engineer-in-Charge.

Providing, supplying, fabricating and installing office table with side

table (credenza) of approved design and finish, comprising main table of

size 1.80 m × 0.75 m × 0.80 m height and side table of size 1.20 m ×

m × 0.65 m height, manufactured from 18 mm thick IS 303 grade MR

plywood. Table top, panels and structural members shall be made of

MR plywood and finished with 1.0 mm thick decorative laminate of

approved shade and make like, Greenlam, Merino, Centurylam Etc. All

exposed edges shall be provided with seasoned hardwood edge lipping,

neatly rounded and finished with melamine polish. Side table shall be

provided with drawers / storage units mounted on heavy-duty

telescopic drawer channels of Suzu / Hettich / equivalent approved

make. Including all necessary hardware such as drawer channels,

hinges, handles, locks, screws, adhesives, cutting, assembling, polishing,

finishing, transportation, loading, unloading and fixing at site, complete

in all respects as per approved drawings and directions of Engineer-in-

Name of Work :- Construction Of New CIVIC CENTER , ANANDNAGAR Bhavnagar(B.M.C.)

NAME OF DOCUMENT: SCHEDULE-B

Item Rate Total Amount

Item Rate Total Amount

Item Description Quantity Unit

Providing and fixing part-height office partition of total height 1.56 m

from finished floor level, consisting of 1.10 m high solid portion and

m high glazed portion above, using 50 mm × 50 mm aluminium hollow

box section framework (minimum 2.0 mm thick), powder coated /

anodized, fixed to floor and adjoining walls with anchor fasteners,

including cladding on both sides with 12 mm thick MR grade plywood

conforming to IS 303 of approved make such as Greenply / Century /

Kitply or equivalent, finished with 1.0 mm thick decorative laminate

173 conforming to IS 2046 of approved make such as Merino / Greenlam / 80.00 Sqm 9176.86

Royale Touche or equivalent on exposed faces, providing 19 mm thick

seasoned wooden border finished with melamine polish on all exposed

edges, fixing 10–12 mm thick toughened glass conforming to IS 2553 of

approved make such as Saint-Gobain / AIS / Modiguard or equivalent in

aluminium glazing channels with EPDM gaskets and silicone sealant,

including all labour, materials, fixtures, fasteners, scaffolding, finishing

and incidentals, complete as per drawings and directions of Engineer-in-

Providing and fixing full-height office partition from finished floor level

up to false ceiling / slab, partly opaque and partly glazed, using 50 mm ×

50 mm aluminium hollow box section framework (minimum 2.0 mm

thick) fixed to floor, ceiling and walls, cladding opaque portions on both

sides with 12 mm thick MR grade plywood conforming to IS 303 of

approved make such as Greenply / Century / Kitply or equivalent,

finished with 1.0 mm thick decorative laminate conforming to IS 2046 of

approved make such as Merino / Greenlam / Royale Touche or

equivalent, providing 19 mm thick seasoned wooden border finished

with melamine polish at all exposed edges, corners, junctions and door

frames, fixing 10–12 mm thick toughened glass conforming to IS 2553 of

approved make such as Saint-Gobain / AIS / Modiguard or equivalent in

aluminium glazing channels with EPDM gaskets and silicone sealant,

including provision for door openings, service cut-outs, all labour,

materials, tools, scaffolding and incidentals, complete as per drawings

and directions of Engineer-in-Charge.all door inside use floor spring and

all assesarary. no extra payment for door inside use floor spring and all

Providing, supplying, fabricating and placing two-seater sofa of

approved design and finish, having approximate size 1.20 m length ×

0.55 m depth, with seating height about 0.40 m and overall height

about 0.75 m. Internal frame made of seasoned hardwood members

and 18 mm thick IS 303 grade MR plywood for seat, back and arm

175 support. Seat and back cushions made of standard density polyurethane 17.00 Each 19070.82

(U-foam). Sofa upholstered with rexine / artificial leather upholstery

fabric of approved shade and texture, neatly stitched and finished. Sofa

mounted on metal / SS legs, including all materials, foam, upholstery,

stitching, adhesives, labour, transportation and placing at site, complete

as per approved drawings and directions of Engineer-in-Charge.

Name of Work :- Construction Of New CIVIC CENTER , ANANDNAGAR Bhavnagar(B.M.C.)

NAME OF DOCUMENT: SCHEDULE-B

Item Rate Total Amount

Item Rate Total Amount

Item Description Quantity Unit

Providing, supplying, fabricating and installing storage cupboard of size

1.20 m (W) × 0.50 m (D) × 2.10 m (H), manufactured from 18 mm thick

IS 303 grade MR plywood of approved make Euro / Greenply / SRG or

equivalent. External surfaces including shutters finished with 1.0 mm

thick decorative laminate of approved make, internal surfaces finished

with 0.8 mm thick white laminate. All exposed edges finished with

176 seasoned hardwood edge lipping with melamine polish. Cupboard 67.00 Each 43528.98

provided with adjustable internal shelves, full height shutters with

locking arrangement, hinges, handles and necessary premium

hardware. Cupboard mounted on 75 mm high legs, including all

materials, hardware, cutting, assembling, polishing, transportation and

fixing at site, complete as per drawings and directions of Engineer-in-

High back chair with Swivel tile mechanism (revolving, back height

more than 24") 5 leg revolving fabricated stand to be made from 40 x

177 x 16 CRC powder coated sections, excell P.P. Cushion Arm , Gas Lift 17.00 Each 14554.10

nylone Base Leatherite fapestry as per selection of EIC ( Greeken Modal

Medium back chair with Swivel tile mechanism (revolving, back height

more than 24") 5 leg revolving fabricated stand to be made from 40 x

178 x 16 CRC powder coated sections, excell P.P. Cushion Arm , Gas Lift 70.00 Each 13686.51

nylone Base Leatherite fapestry as per selection of EIC ( Greeken Modal

Visitor's Chair (Non-Revolving, back height 17") fabricated pipe stand

179 CRC powder coated sections, excell P.P. Cushion Arm , Leatherite 82.00 Each 11605.91

fapestry as per selection of EIC ( Greeken Modal no. 226 A)

Supply, Installation, Testing and Commissioning of Electric driven

fire pump suitable for automatic/manual operation and consisting

of following: complete in all respect as required.

a) Monoblock pump & DIESEL PUMP SET to ensure a minimum

pressure of 3.5 kg / sq.cm. at highest and farthest outlet at

specified flow of 1620 Lpm at 60 m. head conforming to IS

standards B) 180 LPM JOKEY PUMP (3 NO PUMP

Supplying, Installation, Testing and Commissioning of

Control Panel suitable for automatic/manual operation of fire

fighting pumps consisting

(a) Necessary cabling, wiring, earthing from panel to

181 individual equipment shall be included in the quoted price. 1.00 Set 38000.00

(b) Facility for more selections i.e auto or manual.

(c) Protection failure and control cabling.

(d) interlocking of pressure switch with pumps

(e) soft starter

Supply, Installation, Testing and Commissioning of 150 mm dia

Pressure Gauge of range 0 - 16 Kg / cm² conforming to IS -

having bourdon tube of stainless steel 310 in cast aluminium,

stove enameled, black, weather proof case with outer, screwed

aluminium bezel and complete with necessary U-type stainless

steel siphon tube and cock including providing suitably painted

angle iron support to the tube etc.as per specification

complete as required.

Name of Work :- Construction Of New CIVIC CENTER , ANANDNAGAR Bhavnagar(B.M.C.)

NAME OF DOCUMENT: SCHEDULE-B

Item Rate Total Amount

Item Rate Total Amount

Item Description Quantity Unit

Supply, Installation, Testing and Commissioning of the following

sizes of flange jointed / screwed / welded, G I Pipes of Class C

(Hevy class) ISI marked including accessories such as MS

bracket, U clamps with Anchor fasteners, tees / elbows / reducers /

couplings / unions / bends / flanges etc., and laying on the surface

including painting with one coats of anticorrosive primer and one

coats of approved red enamel paint after laying and testing after

Installation etc. as per specifications complete as required.

c) 80 mm dia 3.00 Rmt. 1250.00

COUR CUTTING 2.00 Rmt. 600.00

h) 25 mm dia 6.00 Rmt. 360.00

Supply, installation, testing and commissioning of C.I.

184 Butterfly valve (PN 1.6) with

flanges, nut bolts, gaskets complete as required.

Supply, Installation, Testing and Commissioning of NON RETURN

Supply, installation, testing and commissioning Single Headed

Fire Hydrant Valve with 80 mm N.B. flanged inlet, 63 mm dia

female instantaneous outlet type. S.S. coupling, blank cap, chain,

188 twist release type lug & all accessories Conforming to IS:5290. 5.00 Nos. 4500.00

Including fixing with supports, flanged tapping from wet riser,

orifice plate complete as required

by the Local Fire Authority.

Supply, Installation, Testing and Commissioning of Weather proof

Standard MS Fire Hose Cabinet wall mounting type (450 mm x

600 mm x 250 mm deep) having single opening with necessary

locking arrangement by allan key suitable for housing 1 no.

1no. Branch pipe & nozzle spanner.

Supply, installation, testing and commissioning non-percolating

rubber reinforced lined fire Hose pipe (as per IS : 636) of 63 mm

dia and 15 mtrs long. The hose shall be rated for burst pressure

190 of 35.7 Kg/sqcm. Hose shall be complete with ISI marked 4.00 Nos. 4100.00

SS male & female coupling (IS:903) bound & riveted to hose

pipe with SS rivets & 1.5 mm SS wire. ( RATE 1 NOS HOSE

Supply, Installation, Testing and commissioning of 63 mm dia

instantaneous pattern COM SS short branch pipe, 20 mm dia

191 nozzle conforming to IS 903, suitable for inter connection to 4.00 Nos. 1200.00

hose pipe coupling complete as required by the Local Fire

Supply, installation, testing and commissioning of First Aid Hose

Reel equipment conforming to IS:884 comprising of hose reel

drum, 8 mm shut off nozzle, Rubber hose reel tubing as per IS:

192 444 of 25 mm dia x 30 mtr. long, painting, Manual fix type with 4.00 Nos. 4300.00

fixing bracket, anchor fastener, bolts & nuts etc. complete as

required by Local Fire

Supply, installation, testing and commissioning of SS Ball Valve.

Name of Work :- Construction Of New CIVIC CENTER , ANANDNAGAR Bhavnagar(B.M.C.)

NAME OF DOCUMENT: SCHEDULE-B

Item Rate Total Amount

Item Rate Total Amount

Item Description Quantity Unit

Supply, installation, testing and commissioning of Cast lron Two

Way Fire Brigade Inlet as per IS: 904 having 63 mm dia inlet with

blank cap and chain with necessary fittings,

flanges, nut bolts etc. complete as required.

Supply, Installation, Testing and Commissioning of Gun Metal Air

Release Valve withnecessary fittings. Size: 25 mm (For Riser)

Supply, Installation, Testing and commissioning ofa) Pendent

Sprinkler 57°C standard response (K-80)

Supply, installation, testing and commissioning of PRESSURE

197 switches to each internalhydrant valve with required 3.00 Nos. 3200.00

Supply, installation, testing and commissioning of XLPE insulated

198 copper Cable from each switches to Panel with all necessary 425.00 Mtrs. 125.00

accessories.Size:

Providing and fixing of Manual Fire Alarm system as per

199 requirement and specification consisting of following items 5.00 Nos. 800.00

a) Manual call point (FR-Polymer)

b) Hooters (FR-Polymer) 5.00 Nos. 800.00

c) Cable & other accessories: C XLPE insulated copper 18.00 Mtrs. 150.00

d) Manual Fire Alarm Panel 8 ZONE 1.00 Nos. 6500.00

Supply, installation, testing and commissioning of Carbon

Dioxide (Co2) type Fire Extinguisher of 4.5 kg confirm to

IS:15683, with ISI marked / TAC approved fitted withrequired

accessories including wall suspension brackets.

Supply, installation, testing and commissioning of ABC type 6 kg

201 confirm to IS:15683,with ISI marked / TAC approved fitted with 6.00 Nos. 1800.00

required accessories including wall suspension brackets.

202 FSPA AND NOC CHARGE 1.00 Nos. 35000.00

203 SMOKE DETECTOR 78.00 Nos. 1150.00

204 WATER TANK 50000 UG AND 5000 OH 1.00 Nos. 625000.00

Total Amount Without GST :-

Total Amount Without GST :-

Total Amount Without GST :-

Total Amount Without GST :-