Providing Cricket practice net near Indoor stadium for IISER Thiruvananthapuram Campus

Amount

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinthlevel :

1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:.

Cement mortar 1:4 (1 cement : 4 coarse sand)

12 mm cement plaster of mix :

1:6 (1 cement: 6 fine sand)

Providing and fixing garware UV treated 2.5 mm mesh for covering the sides by using necessary materials as per the direction and supervision of experienced personnel and direction of EIC

Steel work welded in built up sections/ framed work(GI), including cutting, hoisting, fixing in position and applying a epoxy priming coat of approved steel primer and enamel painting etc. all complte as per the direction of EIC as required.

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Steel reinforcement for R.C.C. work ncluding straightening, cutting,bending, placing in position and binding all complete upto plinth

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and laying synthetic multi-sports grass (3 x 12 Mtrs) of approved materials with advanced machineries as per FIFA standards. The Technical Specification of the Turf as follows. 1) Pile height = 15 mm 2) Gauge = 3/16 3) Dtex = 5500 4) Density = 69300 5) Backing = 2 layer (PP cloth + mesh+ SBR latex) 6) Yarn type = 100 % fresh PE 7) White lines – All being painted with PU white paints. 8) Fevicol SR998 shall be used as adhesive. The work has to be completed as per the direction of EIC

Covering cushion around the industrial legs by using 12mm double cushion at a height of 3mtr inorder to avoid injuries during the play.Cushion will be covered with premium rexin clothes.The work has to be completed as per the direction of EIC