Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.2 LAccepted-AOC 99 MODEL TOWN PATHANKOT 145001 | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹15.8 L+₹1.2 L (8.40%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹16.5 L+₹2.0 L (13.8%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹17.0 L+₹2.4 L (16.7%)Rejected-Finance BX 167 4 ISHWAR NAGAR PATHANKOT PUNJAB 145001 UDYAM PB 16 0001334 03AALFR1593C1ZE B R | PATHANKOT | PUNJAB | 145001 | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹17.6 L+₹3.1 L (21.0%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
20 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SAMBA
GE SAMBA
REPAIR IMPROVEMENT REPLACEMENT TO LT NETWORK AND OTHEER ALLIED CONNECTED WORKS AT ZONE II AND III UNDER MIL STN SAMBA
2023_MES_604037_1
GE/SMB/T-37/2023-24
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
SAMBA
REF NIT
8 documents required · 8 mandatory
₹500
GE SAMBA
₹50,000
Yes
1 Sept 2023
20 Jun 2023
22 Jul 2023
20 Jun 2023
20 Jul 2023
6 Jul 2023
20 Jun 2023 - 22 Jun 2023
Amount
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of cables, poles & stay or other items and getting out soil in any type soil complete all as specifed.
Excavation in trenches not exceeding 1.5 mtr wide and exc. 1.5 m but not exceeding 3.0 mtr in depth for poles or other items and getting out soil in any type soil complete all as specifed.
Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm complete all as specified.
Removing excavated material not exceeding 50 mtr and depositing where directed in a level not exceeding 1.5 mtr above the starting point of any type of soil complete all as specified
Sand cushioning to under ground electric cable a layer of 8 cm thick before laying the cable and stretching the cable and punned down to form a bed of 18 cm and second layer of 15 cm thick after laying the cable complete all as specified in clause 19.75 of MES Schedule part-I (2009) Note : Sand shall be of good quality as specifed and punned thickness shall be measured and paid.
Well burnt sub class 'B' bricks of nominal size 230X115X75 mm abutting each other for mechanical protection of cable with width equal to lenght of brick complete all as specified.
Plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation of poles including use of necessary form works for rough finished surface complete all as specified and directed.
Plain cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in coping to poles including use of necessary form works for rough finished surface complete all as specified and directed.
Structural steel work conforming to grade Fe-410S as in cross arms bracing supports clamps, back plates fabricated from steel section including nuts, bolts and washers welding, drilling hole, complete with two coats of aluminium paint over one coat of primer, complete all as specified and directed.
XPLE under ground cable, insulated screened PVC bedded galvanised steel strip/ wire armoured, electric power cable heavy duty 1100 volts grade of size 95 sqmm, 3.5 core with stranded aluminium conductor including proper connection with aluminium thimbles of suitable size /rating laid in trenches through pipe or under culvert including taking out existing cables,complete all as specified and directed by Engr-in-charge. (Note – Necessary excavation, returning filling in,removal of soil ,sand cushioning,brick work and GI pipe shall be measured and paid under respective item of BOQ).
XPLE under ground cable, insulated screened PVC bedded galvanised steel strip/ wire armoured, electric power cable heavy duty 1100 volts grade of size 70 sqmm, 3.5 core with stranded aluminium conductor including proper connection with aluminium thimbles of suitable size /rating laid in trenches through pipe or under culvert including taking out existing cables,complete all as specified and directed by Engr-in-charge. (Note – Necessary excavation, returning filling in,removal of soil ,sand cushioning,brick work and GI pipe shall be measured and paid under respective item of BOQ).
XPLE under ground cable, insulated screened PVC bedded galvanised steel strip/ wire armoured, electric power cable heavy duty 1100 volts grade of size 50 sqmm, 3.5 core with stranded aluminium conductor including proper connection with aluminium thimbles of suitable size /rating laid in trenches through pipe or under culvert including taking out existing cables,complete all as specified and directed by Engr-in-charge. (Note – Necessary excavation, returning filling in,removal of soil ,sand cushioning,brick work and GI pipe shall be measured and paid under respective item of BOQ).
XPLE under ground cable, insulated screened PVC bedded galvanised steel strip/ wire armoured, electric power cable heavy duty 1100 volts grade of size 25 sqmm, 4.0 core with stranded aluminium conductor including proper connection with aluminium thimbles of suitable size /rating laid in trenches through pipe or under culvert including taking out existing cables,complete all as specified and directed by Engr-in-charge. (Note – Necessary excavation, returning filling in,removal of soil ,sand cushioning,brick work and GI pipe shall be measured and paid under respective item of BOQ).
XPLE under ground cable, insulated screened PVC bedded galvanised steel strip/ wire armoured, electric power cable heavy duty 1100 volts grade of size 16 sqmm, 4.0 core with stranded aluminium conductor including proper connection with aluminium thimbles of suitable size /rating laid in trenches through pipe or under culvert including taking out existing cables,complete all as specified and directed by Engr-in-charge. (Note – Necessary excavation, returning filling in,removal of soil ,sand cushioning,brick work and GI pipe shall be measured and paid under respective item of BOQ).
XPLE under ground cable, insulated screened PVC bedded galvanised steel strip/ wire armoured, electric power cable heavy duty 1100 volts grade of size 25 sqmm, 2.0 core with stranded aluminium conductor including proper connection with aluminium thimbles of suitable size /rating laid in trenches through pipe or under culvert including taking out existing cables,complete all as specified and directed by Engr-in-charge. (Note – Necessary excavation, returning filling in,removal of soil ,sand cushioning,brick work and GI pipe shall be measured and paid under respective item of BOQ).
GI pipe in replacement ( Light grade ) for protection of LT cable fixed to walls/ poles/road crossing including suitable size clamps complete of size 50 mm bore , complete all as specified and directed
GI pipe in replacement ( Light grade ) for protection of LT cable fixed to walls/ poles/road crossing including suitable size clamps complete of size 80 mm bore , complete all as specified and directed
Earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick not less than 6.0 mm thick buried directly in ground vertically (in earth pit not less than 2.25 meter deep below ground level) with the top edge of earth plate at a depth not less than 1.5 meter below normal ground level, connected to galvanised steel strip 32x6 mm by means of nuts, bolts, washers, check nuts of GI steel all as shown in electric plate no. 3 all as specified and indicated complete and including charcoal dust and salt etc and GI protection pipe, medium grade 40mm and GI watering pipe 20mm, medium grade with funnel and wire mesh, 15 mm thick Pre-cast RCC M-15 (Nominal mix) cover reinforced with XPM weight not less than 4 kg/sqm with suitable handle of 6 mm dia MS bar and angle iron 40x40x3 mm frame for cover, PCC M-15 (Nominal mix) pit, excavation and earth work in any type of soil, returning, filling in and removal of surplus soil and connected work, complete all as specified and directed.
Stay assembly complete with accessories as shown in electrical plate No. 1 of 16 mm dia complete all as specified and directed.
Replacement loop type insulator, vitreous porcelain, white brown or green with overall dimensions 65x90 mm clearance of hole 16 mm including dismantling old unserviceable insulator, complete all as specified and directed.
Galvanized stranded stay wire of size 7/4.00 mm including necessary binding with insulator, clamp and stay clamp, complete all as specified and directed.
Wall mounted LT busbar chamber , aluminium bus bar of capacity 200 Amps , 3 phase 415 volts, 4 ways, fixing on angle iron 40x40x5 mm including PCC 1:3:6 , complete all as specified and directed. Make- Havells cat part no. IHBC020004 or technocommerically equivalent to Legrand / ABB/ C&S/ Schneider.
Wall mounted LT busbar chamber , aluminium bus bar of capacity 100 Amps , 3 phase 415 volts, 4 ways, fixing on angle iron 40x40x5 mm including PCC 1:3:6 , complete all as specified and directed. Make- Havells cat part no. IHBC006304 or technocommerically equivalent to Legrand / ABB/ C&S/ Schneider.
LED street light fitting 60 Watt, 230 V, AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver with impact and corrosion resistant including thermal management in multiple optics with IP-66 protection, CCT 5700K, lumen efficacy not less than 110 lumen/watts including three core PVC insulated cable with multi stranded, unsheathed of size 1.5 Sqmm (FRLS) 1100 volts for connection from junction box to security light to be laid inside PVC conduit 20 mm dia 1.8 mm thick duly fixed with 2 nos MS clamp fabricated to the shape of PCC/Steel tubular pole made out of MS plate 25x3 mm thick complete with nuts, bolts and washer from junction box to GI bracket of street light fittings including taking out old u/s existing flood light with fittings, complete all as specified and directed. Make:-HPL Cat Part No. HPLLEDDSL6060WS or its techno commercially equivalent in Philips/Havells/Wipro/Crompton/Polycab. Note- Street light fittings, PVC Conduit, street light bracket shall be included in quoted rate.
LED street light fitting 90 Watt, 230 V, AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver with impact and corrosion resistant including thermal management in multiple optics with IP-66 protection, CCT 5700K, lumen efficacy not less than 110 lumen/watts including three core PVC insulated cable with multi stranded, unsheathed of size 1.5 Sqmm (FRLS) 1100 volts for connection from junction box to security light to be laid inside PVC conduit 20 mm dia 1.8 mm thick duly fixed with 2 nos MS clamp fabricated to the shape of PCC/Steel tubular pole made out of MS plate 25x3 mm thick complete with nuts, bolts and washer from junction box to GI bracket of street light fittings including taking out old u/s existing flood light with fittings, complete all as specified and directed. Make:-HPL Cat Part No. HPLLEDDSL9060WS or its techno commercially equivalent in Philips/Havells/Wipro/Crompton/Polycab. Note- Street light fittings, PVC Conduit, street light bracket shall be included in quoted rate.
LED flood light, 170/180 watt, 230 V, AC outdoor type with thermal management in multiple optics, powder coated, pressure die cast aluminium body with toughened glass visor, and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp,CCT 5700K, lumen efficacy not less than 110 lumen/watts (in repair) including taking out old u/s existing flood light with fittings, complete all as specified and directed. Make:-Polycab or its techno commercially equivalent in Philips/Havells/Wipro/Crompton/HPL.
Supply & errection Pre-stressed concrete poles 9 meter long 102 x 172 mm top and 102 x 279 mm at bottom, class-10, errecting in truely vertical position, making 30 cm wide strip (total 5 nos) with black and yellow paint including numbering,complete all as specified and as directed. (Note : Excavation & earth work, PCC shall be measured and paid for separately under respective items of BOQ).
Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents.
dinesh enterprises
Bharat Builder
M/S RUDHRAKSH TRADING CO
Jiwan Singh
M/S SALARIA ASSOCIATES
A K JAIN AND SONS
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .