Construction of New Arts Building for Gujarat arts and Science College at Gujarat College Campus, Ahmedabad.

NAME OF WORK :-

Construction of New Arts Building for Gujarat arts and Science College at Gujarat College

Campus, ahmedabad

BILL OF QUANTITIES

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

1 Excavation for foundation upto 1.5 m depth 9562.00 Cmt 117.08

including sorting out and stacking of useful

materials and disposing off the excavated stuff

upto All lift and lead.(A) Loose or soft soil

2 Excavation for foundation for depth from 1.5 m 7373.00 Cmt 162.38

to 3.0 m including sorting out and stacking

of useful materials and disposing off the

excavated stuff upto All lift and lead .(B)

Dense or Hard soil

3 Filling in foundation and plinth with sand in 986.00 Cmt 460.19

layers of 20 cm. Thickness including watering

ramming and consolidating etc. comp.

4 Filling available excavated Earth (Excluding Rock) 12755.00 Cmt 130.39

in trench plinth side of foundation . in layer not

excluding 20 cm in depth consolidation each

deposited layer by ramming and watering etc.

5 Anti-Termite System: Providing and laying of 4380.00 Smt 134.33

permanent piping technology anti-termite

treatment before flooring work by installing LLDP

(Low linear density polyethylene) tube of 8 mm

O.D. & 6.4 mm I.D. with inbuilt pressure

compensation chip every 30 cm interval in the

tube, having working pressure of 2 Kg/cm² and

release rate of 1.9 ltr/hour fixed by P-clips and

nails. The LLDP pipe shall be installed at the

entire periphery of the building and at internal

network of building at a depth of 20 to 200 mm

under floor at every 2 to 3 mtr. c/c distance

(adjusted as per building layout) & ends of loop

pass through a PVC elbow of minimum 32 mm ID

at junction box of wall and floor level, entering

into a steel reinforced grooved flexible pipe of

minimum 22 mm ID leading into junction box

and the loops shall terminate in junction boxes &

test every junction during injecting chemicals for

termite control treatment.

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

The anti-termite chemical Imidacloprid 30.5% SC -

Sq.mt 133.00 mix as per IS-6313 (part III) shall

be injected by the pressure pump diluted with

water @ 10.5 ml/5 ltr of water at the rate of

Kg/sq.cm @ 5 ltr/SMT. The contractor shall

submit approved line plan for piping system and

junction boxes dully approved by Engineer-in-

Charge with bond of 5 year warranty. (i) Anti-

termite chemical injected area (Chemical injecting

incl. labour cost).

6 Providing and laying in position Ready Mixed M- 922.00 Cmt 4226.95

150 grade concrete for reinforced cement concrete

work in Foundations & Plinth, using cement

content as per approved Design Mix

manufactured in fully automatic batching plant

established on site and transported to site of

work in transit mixer having continuous agitated

mixer, manufactured as per mix design of

specified grade for reinforced cement concrete

work including pumping of R.M.C. from transit

mixer to site of laying, excluding the cost of

reinforcement and including cost of centering.

shuttering, formwork finishing and admixtures

in recommended proportions as per IS : 9103 to

accelerate/ retard setting of concrete, improve

workability without impairing strength and

durability as per direction of the Engineer -In -

Charge. Without Fly Ash (Min cement level as per

latest IS 456 shall be maintained) For All Floor

7 Providing and laying in position Ready Mixed M- 583.00 Cmt 5859.11

200 grade concrete using cement content as per

approved Design Mix manufactured in fully

automatic batching plant established on site and

transported to site of work in transit mixer having

continuous agitated mixer, manufactured as per

mix design of specified grade for reinforced

cement concrete work including pumping of

R.M.C. from transit mixer to site of laying,

excluding the cost of reinforcement and including

cost of centering. shuttering, formwork finishing

and admixtures in recommended proportions as

per IS : 9103 to accelerate/ retard setting of

concrete, improve workability without impairing

strength and durability as per direction of the

Engineer -In - Charge. Without Fly Ash (Min

cement level as per latest IS 456 shall be

maintained) For Plinth slab and all R.C.C.

memebers at all floor level

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

8 Providing and laying in position Ready Mixed M- 7243.00 Cmt 6536.85

250 grade concrete using cement content as per

approved Design Mix manufactured in fully

automatic batching plant established on site and

transported to site of work in transit mixer having

continuous agitated mixer, manufactured as per

mix design of specified grade for reinforced

cement concrete work including pumping of

R.M.C. from transit mixer to site of laying,

excluding the cost of reinforcement and including

cost of centering. shuttering, formwork finishing

and admixtures in recommended proportions as

per IS : 9103 to accelerate/ retard setting of

concrete, improve workability without impairing

strength and durability as per direction of the

Engineer -In - Charge. Without Fly Ash (Min

cement level as per latest IS 456 shall be

maintained) for all RCC elements like Footings

Mass concrete , Column up to GL

Ground/Plinth Beam Plinth Slab, Columns,

Beam, Chhajja, Lintal, Slab, Stair, RCC Wall,

Coping etc. For All Floor

9 Add for more consumption of cement due to 127912.00 Kg 6.08

change in concreting from controlled/RMC

cement concrete of specified grade in R.C.C.

members such as column footings, columns,

beams, pardi, vertical and horizontal fins, etc.,

using design mix concrete M20/M25/M30/M35

or equivalent, including loading, unloading,

stacking, handling, labour charges, mixer

machine operation and all incidental charges

complete as directed by Engineer-in-Charge.

10 Providing IS Mark TMT FE-550D bar 932155.00 Kg 96.66

reinforcement for RCC work including bending &

placing in position complete up to All floor Level

(Primary Producer Steel TATA, RINL, VIZAG,

11 Providing and fixing 90 cm Height Stainless Steel 256.00 Rmt 4332.29

Railing made from anticorrocive 304 grade S S

pipe of 50 mm dia (16 Gauge) as hand rail with S

S 304 grade Baluster of 40 mm dia (16 Gauge) as

a vertical support fixed in RCC slab at 1.2m c/c

including three horizontal S S pipes of 25 mm

dia (16 Gauge) at eqal distance fixed by

mm dia (16 Gauge) S S pipe with baluster

including accessories as per detailed drawing as

directed etc. complete.

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

12 Providing and fixing 30 cm Height Stainless Steel 322.00 Rmt 1969.50

Hand Railing made from anticorrocive 304 grade

S S pipe of 50 mm dia (16 Gauge) as hand rail

with S S 304 grade Baluster of 40 mm dia (16

Gauge) as a vertical support fixed in RCC member

at 1.2m c/c S S pipe with baluster including

accessories as per detailed drawing as directed

13 Brick work using common burnt clay building 438.00 Cmt 4021.02

bricks having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:6. (1- Cement : 6 -fine sand) (B)

Conventional below plinth

14 Brick work using common burnt clay building 2830.00 Cmt 4344.62

bricks having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:6 (1- Cement : 6 -fine sand) (B)

Conventional All Floor

15 Half Brick masonry in common brunt clay 3230.00 Sq m 660.44

building bricks having crushing strength not less

than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1-

Cement : 4 -coarse sand ) in foundation and

plinth (B) Conventional in super structure. for All

16 Providing and fixing 150 mm wide, approved 1869.00 Smt 339.36

quality chicken wire mesh at junction of brick

work and RCC work or two dissimilar surfaces, at

all heights fixed by nails, rowal plugs or tag

before applying the plaster, including curing,

scaffolding all complete as directed.

17 Providing 20 mm thick double coat mala cement 28487.03 Smt 310.68

plaster on interior brick / concrete work for

plastering comprising of base coat of 12 mm thick

cement plaster in cement mortar (1 Cement :

coarse sand) in rough finishing and 8 mm thick

top coat of cement mortar 1:2 (1 Cement :

Coarse sand) finished with trovel including

scaffolding curing and 10mm grooves etc.

complete.. ForAll Floor

18 Providing 10 mm. Thick mala cement plaster in 17549.70 Smt 194.02

single coat for plastering on ceiling and soffits of

stairs and finished with trovel in : (I) Cement

mortar 1:4 (1 cement : 4 sand) smooth mala

finish and 10mm grooves etc. complete. All Floor

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

19 20 mm thick Sand faced cement plaster with 11916.00 Smt 367.54

1cmx1cm grooves as suggested by this office

consisting of 12 mm thick backing coat of C.M.

1:3 ( 1 cement : 3 coarse sand ) and 8 mm thick

finishing coat of C.M. 1:1 ( 1 cement : 1 coarse

sand) and 18mm wide & 8mm deep groovesfor all

heights as directed etc. complete. and as per

pattern sample aprroved by the architect or

directed engineer in-charge

20 Providing throating or plaster drip and moulding 2283.00 Rmt 41.66

to R.C.C. Chhajja.

21 Wall painting with two coats of Acrylic lapy 27598.00 Smt 119.82

(putty) & two coats of primer of approved brand

and manufacture on new wall surface to give an

even shade including thoroughly brushing the

surface free from mortar droppings and other

foreign matter and sand papered smooth,

followed by two coats of plastic emulsion paint of

approved brand and manufacture to give an even

shade, complete.

22 Painting ceiling painting with two coats of Acrylic 17582.00 Smt 125.23

lapy (putty) & two coats of primer of approved

brand and manufacture on new surface to give an

even shade including thoroughly brushing the

surface free from mortar droppings and other

foreign matter and sand papered smooth,

followed by two coats of plastic emulsion paint of

approved brand and manufacture on wall and

ceiling surfaces to give an even shade, complete.

23 Wall Painting (Two coats) with 100% weather 11844.00 Smt 124.63

proof acraylic emulsion paint of approved brand

and manufacture and of required shade on

exterior wall surface to give an even shade over

and including primery coat with Alkaly resistance

primer of approved brand after thoroughly

brushing surface to remove all dust and remains

of loose powdered material etc. copm. for all

24 White washing with lime on wall surface (two 160.00 Cmt 12.41

coats) to give an even shade including thoroughly

booming the surface to remove all dirt, dust;

mortar drops and other foreign matter.

25 Forming groove of uniform size from 10 x 10 mm 15868.00 Rmt 52.32

and upto 25 x15 mm in plastered surface as per

approved pattern using wooden batten, nailed to

the under layer including removal of wooden

battens, repairs to the edges of plaster panel and

finishing the groove complete as per specifications

and direction of the engineer

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

26 Providing And filling with good quality cinder 75.00 Cmt 555.50

(steam coal) as directed by engineer in charge in

sunks in layers of 15 cm thick,including

watering,placing ,ramming well etc as directed,

27 Providing Water proofing Treatment on Sunk Slab 371.00 Smt 369.46

including cement concrete flooring 1:2:4 (1-

cement : 2-coarse sand : 4-graded stone

aggregate 20mm nominal size) laid in one layer

and finished with a 1:3 (1 cement : 3 Mortar )

floating coat of neat cement average 50mm thick

to Prepare slope including water proofing

chemical etc. Complete for Sunk Slab All Floor.

28 Providing and laying broken chine mosaic flooring 3944.00 Smt 747.29

for terrace using 12 mm to 20 mm broken pieces

of glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar

creme out upto surface using white cement

including rounding off junctions and extending

them upto 15 cm along the wall,clearing with

water and oxalic acid etc. as directed

29 Providing and laying cement concrete work 1:2:4 395.00 Cmt 4133.09

(1-Cement : 2- Coarse sand : 4- graded stone

aggregates 20 mm nominal size) and curing

complete excluding cost of formwork and

reinforcement for reinforced concrete work for All

30 Providing Plinth Protection to Building including 683.00 Smt 2240.48

excavation in ordinary soil and laying cement

concrete 1:3:6 using stone aggregates of 40mm

nominal size in foundation layer 125 mm thick+

125mm thick sand layer below pre-cast Rubber

Dye inter locking concrete block 60mm thick with

grade of concrete M300 pneumatic compressed

by mechanically pressed and as per approved

design including 75mm Sand layer for levelling

and filling the joint with sand in proper line and

level etc. complete, Including Providing and fixing

pre-cast concrete kerb stone of grey cement based

concrete block 30cm length, 30cm height and

15cm thick made of M250 grade concrete as per

approved design and including excavation for

fixing in proper line and level, filling the joint with

C:M 1:3 (1cement:3 fine sand) etc. complete.

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

31 Providing and fixing in position standard 91.00 Smt 4803.56

extruded Aluminium Three Track Sliding Window

System (27 mm Series Deluxe Type) . The frame

shall consist of top, bottom, and side sections of

size 91 mm × 45 mm, 1.5 mm thick, weighing

1.591 Kg/Rmt, and the shutters shall consist of

top, bottom, and side sections of size 65 mm ×

mm, 1.5 mm thick, weighing 1.020 Kg/Rmt, with

interlock section of size 37 mm × 31.75 mm,

mm thick, weighing 0.328 Kg/Rmt. The window

shutters shall be fitted with 5 mm thick

transparent tinted float glass, fixed with clip bead

arrangement and EPDM rubber gasket to ensure

airtight and watertight performance. All joints

shall be properly sealed with approved section

sealant, and the entire system shall include air

lock strip and power-coated standard aluminium

fittings. The work shall be completed in all

respects including materials, labour, fittings,

tools, and equipment, as per detailed drawings

and as directed by the Engineer-in-Charge.

32 Providing and fixing standared extruded of 595.00 Smt 1525.00

alluminium section of size 63.50 x 38.10 x

mm,@ Wt 1.094Kg / Rmt with colour anodized

alluminium frame with 5 mm thick transparent

bronze colour tinted float glass as details etc

complete for Fix Ventilation

33 Providing and fixing in position standard 1159.00 Smt 4435.92

extruded Aluminium Two Track Sliding Window

System (27 mm Series Deluxe Type) comprising

two sliding shutters only. The frame shall consist

of top, bottom, and side sections of size 54 mm ×

45 mm, 1.5 mm thick, weighing 0.993 Kg/Rmt,

and the shutters shall consist of top, bottom, and

side sections of size 65 mm × 28 mm, 1.5 mm

thick, weighing 1.020 Kg/Rmt, with interlock

section of size 37 mm × 31.75 mm, 1.3 mm thick,

weighing 0.328 Kg/Rmt. The window shutters

shall be fitted with 5 mm thick transparent tinted

float glass, fixed with clip bead arrangement and

EPDM rubber gasket to ensure airtight and

watertight performance. All joints shall be

properly sealed with approved section sealant,

and the entire system shall include air lock strip

and powder-coated standard aluminium fittings.

The work shall be completed in all respects

including materials, labour, fittings, tools, and

equipment, as per detailed drawings and as

directed by the Engineer-in-Charge.

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

34 Providing and fixing openable Aluminium 71.00 Smt 5948.90

casement window made from standard extruded

colour anodized Aluminium sections, with frame

members (bottom, top and sides) of Jindal Section

No. 20630 and openable shutters made of single-

glass shutter members (top, bottom and sides) of

Jindal Section No. 20727, including glazing clip

member Jindal Section No. 19359. The shutters

shall be fitted with 5 mm thick transparent plain

float glass, fixed with EPDM rubber gaskets and

transparent silicon sealant. The work shall

include providing and fixing S.S. hinges, S.S.

handle of 150 mm, S.S. stopper 200 mm long,

and all necessary fittings, fixtures and

accessories, complete as per approved drawing

and as directed by the Engineer-in-Charge.

35 Providing & Fixing in position standard extruded 125.00 Smt 3960.41

approved colour anodised Aluminum Ventilation

with outer frame section 20125 Stander Box

Frame @ Wt 0.861 kg/Rmt with 5mm thick fixed

ground glass fixed to alluminium strip blade

fixed or adjestable ventilation & Providing and

fixing Nylon Mosquito net with stitching on wall &

fitting of exhaust fan as per ventilation size,

including all required materials, fixtures,

fastenning, labours and equipments as per

detailed drawing as directed. For Ventilators

36 Providing and fixing double shutter specially 25.00 Smt 7430.57

designed hollow metal door comprising 35 x

mm M.S. rectangular hollow section frame with

25 x 25 mm M.S. pipe horizontal stiffeners placed

at equal spacing throughout the height for rigidity

and stability. Both shutters shall be fabricated

with 19 mm thick Marine Plywood, finished with

approved shade, pattern, and design of decorative

laminate on both sides, and edge beading neatly

polished. The door shall be fitted with durable

floor spring (minimum capacity 200 kg) and

cm long stainless steel handles on both sides,

including all fixtures, fasteners, holdfasts, hinges,

necessary hardware fittings, polishing, finishing,

labour, and materials, complete as per

architectural drawing and as directed by the

Engineer-in-Charge.

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

37 Providing and fixing 38 mm thick flush double 518.00 Smt 4467.23

door shutter, solid core type, conforming to

IS:2202 and ISI approved, mounted on an

anodized aluminium frame made from sections of

size 63.5 mm × 38 mm x2.5mm, with country

wood inserts provided inside the frame to ensure

durable hinge fixing. Each shutter shall be

finished with 1 mm thick decorative laminate on

both sides, with machine-glued PVC edge

banding on the periphery. The work shall include

providing and fixing 300 mm long stainless steel

handles on both sides, stainless steel fixtures,

approved make locking arrangement, 4 nos.

mm long stainless steel hinges per shutter, and

all necessary fixtures and fasteners. The rate

shall include all materials, fittings, labour,

equipment, and accessories, complete as per

approved drawings and directions of the Engineer-

38 Providing and fixing 38 mm thick flush single 130.00 Smt 4587.42

door shutter, solid core type, conforming to

IS:2202 and ISI approved, mounted on an

anodized aluminium frame made from sections of

size 63.5 mm × 38 mm x2.5mm , with country

wood inserts provided inside the frame to ensure

durable hinge fixing. The shutter shall be finished

with 1 mm thick decorative laminate on both

sides, with machine-glued PVC edge banding on

the periphery. The work shall include providing

and fixing 150 mm long stainless steel handle,

stainless steel fixtures, approved make locking

arrangement, 4 nos. 150 mm long stainless steel

hinges, and all necessary fixtures and fasteners.

The rate shall include all materials, fittings,

labour, equipment, and accessories, complete as

per approved drawings and directions of the

Engineer-in-Charge.

39 Providing and fixing FRP frame size 100 x 50 mm 120.00 Smt 2325.02

and 35 mm thick ( Fiber Glass with PUF Injection

) FRP depress panel Single or Double shutter

having extra reinforcement on sides & edges in

Gel coat finish.The core of the both shutter &

frame is to be filed up with injected fire retradat

grade polyurethene foam done in situ along with

embeded wooden pieces for stiffening & also

taking hinges & fintures.The whole FRP frame &

single or double shutter is to be waterproof,

weatherproof, termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of S.S

hinges with necessary screws & S.S fixtures &

fastenings & fartener sleeve.Colour and Shade

approved by Engineer-In-Charge.

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

40 Providing and placing 0.6m x0.6m Double 295.00 Smt 1425.11

Charged Vitrified Tile vitrified 8 mm thick tile

flooring over 20 mm (average) base of cement

mortar 1:6 ( 1 cement: 6 coarse sand) on new

surface or fixing on existing flooring by adhesive

material with 3mm groove including material,

labour cost etc; including dismentaling of

existing flooring and jointed with color cement

slurry including finished with flush pointing &

cleaning the surface etc. complete in Two colour

pattern or as per directed engineer incharge.(tack

10% DARK shade)

41 Providing and placing 0.6m x0.6m Double 11.00 Smt 1302.90

Charged Vitrified 8 mm thick tile skirting over

mm (average) base of cement mortar 1:3 (

cement: 3 coarse sand) on new surface or fixing

on existing flooring by adhesive material with

3mm groove including material, labour cost etc;

including dismentaling of existing flooring and

jointed with color cement slurry including finised

with flush pointing & cleaning the surface etc.

complete in Two colour pattern or as per directed

engineer incharge.(tack 10% DARK shade)

42 Providing and placing 600 mm × 600 mm Full 253.00 Smt 1510.96

Body Vitrified Tiles, 8mm to 10mm thick, Salt &

Pepper finish, flooring over 20 mm (average) thick

cement mortar 1:6 (1 cement : 6 coarse sand) on

new surface or fixing on existing flooring using

approved tile adhesive with 3mm groove

including material, labour cost etc; including

dismantling of existing flooring wherever

required, laying in proper line, level and pattern,

joints filled with matching coloured cement

slurry, finishing with flush pointing, complete

cleaning of surface, etc. complete, laid in two-

colour pattern with 10% tiles in dark shade or as

directed by Engineer-in-Charge.

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

43 Providing and placing 600 mm × 600 mm / 300 1272.00 Smt 1607.92

mm high Full Body Vitrified Tiles, 8 mm thick,

Salt & Pepper finish, for skirting, fixed using

approved tile adhesive over prepared cement

mortar base, including 12 mm (average) thick

cement mortar 1:3 (1 cement : 3 coarse sand) on

new surface or fixing on existing surface with

3mm groove including material, labour cost etc;

including dismantling of existing skirting/flooring

wherever required, cutting tiles to required

height, fixing true to line, level and plumb,

providing 3 mm wide groove filled with approved

epoxy grout at joints, joints finished neatly,

complete cleaning of surface, etc. complete, laid

in two-colour pattern with 10% tiles in dark

shade or as directed by Engineer-in-Charge.

44 Providing and laying Machine cut Mirror polished 11481.68 Smt 992.66

Kota stone(60cmx45cm /60cmx60cm) slab

flooring over 20mm (Average) thick base of

cement mortar 1:6 (1-cement : 6-coarse sand) or

L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid

over and jointed with grey cement slurry mixed

with pigment to match the shade of slab

including rubbing and polishing etc. complete. (A)

45 Providing and laying Machine cut Mirror polished 557.00 Smt 1187.79

Kota stone(60cmx45cm /60cmx60cm) slab

25mm thick in risers of steps,skirting Dedo and

pillars laid on 10mm thick cement mortar 1:3 (1-

Cement : 3 coarse sand) and jointed with gray

cement slury mixed with pigment to match the

shade of slab including rubbing and polishing

46 Providing and laying antiskid ceramic tiles 30 x 290.00 Smt 970.07

30 cm size 6 mm thick in flooring treads of steps

and landing laid on a bed of 12 mm thick cement

mortar 1:3(1-cement:3-coarse sand)finishing with

flush pointing in white cement

47 Providing and laying glazed tiles tiles size 30 x 357.00 Smt 1441.22

60 cm 8 mm thick in skirting risers of steps and

dedo on 10 mm thick cement plaster 1:3 (1-

cement:3coarse sand) and jointed with colour

cement slurry etc completed.

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

48 Providing and laying machine cut free edge 928.98 Smt 2541.16

machine polished granite stone 15mm - 18mm

thick finished treads in length with 1cm

projecting nozing rounded moulding in tread laid

over 20 mm (av.) thick of CM 1:6 on treads

jointed with grey or colour cement slurry

including rubbing and polishing incl. making

Three No.s of grooves of size 3mm X 3mm along

the length of treads etc. complete

49 Providing and laying machine cut free edge 229.97 Smt 2211.90

machine polished granite stone 15mm - 18mm

thick finished risers and skirting in length in

12mm thick CM 1:3 on risers jointed with grey or

colour cement slurry including rubbing and

polishing etc. complete

50 Providing and fixing frosted finished 600mm x 26.00 Smt 6008.49

1200mm glass urinal partition with crystalline

Dhar polish on exposed edges, supported by SS

legs and fitting bracket clamp with cut holes and

silicon grouting, including all accessories and

labor charges directed by the engineering in

charge, etc. complete

51 Providing and fixing mirror polished 16mm to 18 2963.00 Smt 3216.85

mm thick Balck Granite stone with full round

edge and mirror polish of approved quality, shade

and colour as approved by Engineer-in-Charge, in

cladding on sill and around the lift door, fixed

with 12 mm thick cement mortar CM (1:3) and

cement slurry & approved adhesive, including

moulding and polishing of all exposed edges,

complete as directed by the Engineer-in-Charge.

52 Providing and laying water proofing treatment by 252.00 Smt 942.25

conventional method including cleaning the slab

surface by wire brush as directed including

provding first layer of C.M. 1:4 of 40 mm

thickness mixed with water proofing compound at

rate prescribed by manufacturer, including

putting of brick bats of average thickness 40 mm

Well immerssed in water laid uniformly on first

layer of mortar including applying cement slurry

@ rate of 0.08 bag/Smt. on fixed layer of brick

bats including maintaining necessary slope, in

second layer 40 mm thick C.M 1:4 mixed with

water proofing compound as directed, including

finishing smooth with cement slurry as directed

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

53 Providing and fixing M.S Safty Grills having 44235.00 Kg 108.07

16mm Solid MS Squre bar Horizontally at every

equal 0.10m C/C distance and 2 no of bar

Vertically at every equal 0.375m C/C distance

Fixing on around (5x40) mm Solid MS Patti

including cutting, welding and fabrication etc;

including one coat of primer of approved quality

and two coats of oil painting as per detail drawing

etc. complete as per directed Engineer in charge.

54 Providing erecting and fixing Triple layer PVC. 75000.00 Litre 9.09

(ISI) water tank confirm to IS 12701of required

capacity each with all necessary fittings and

connection etc. complete on terrace.

55 Providing laying and jointing in true line and level 700.00 Rmt 195.64

50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of

56 Providing laying and jointing in true line and level 480.00 Rmt 148.12

40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of

57 Providing laying and jointing in true line and level 1560.00 Rmt 91.84

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

58 Providing laying and jointing in true line and level 1360.00 Rmt 81.31

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of

59 Providing, laying and jointing in true line and 310.00 Rmt 831.22

level 160 diametre U.P.V.C (Type B) conforming to

IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming

to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 160 mm

diametre x 210 mm length x 196 mm heigh at

every 2000 mm center to center or shall be

concealed in walls as directed including

necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed

with adhesive solvent cement including cost of all

60 Providing, laying and jointing in true line and 900.00 Rmt 835.15

level 110 diametre U.P.V.C (Type B) conforming to

IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming

to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 110 mm

diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be

concealed in walls as directed including

necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed

with adhesive solvent cement including cost of all

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

61 Providing, laying and jointing in true line and 340.00 Rmt 283.81

level 75 mm dia. UPVC SWRType B pipe

conforming to IS 13592-1992 with one end plain

and other end socketed with rubbering and fitting

conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant,

pipe shall be fixed on wall using of PVC clamp at

every 2000 mm c/c or shall be conceled in walss

as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement

including cost of all materials.

62 Providing laying and jointing in true line and level 640.00 Rmt 1369.56

100 mm dia. U.P.V.C. Pipe ( SCH- 80) for cold

water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of

63 Providing laying and jointing in true line and level 560.00 Rmt 935.26

80 mm dia. U.P.V.C. Pipe ( SCH- 80) for cold

water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of

64 Providing laying and jointing in true line and level 400.00 Rmt 808.00

65 mm dia. U.P.V.C. Pipe ( SCH- 80) for cold

water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of

65 Providing and fixing in PVC SWR cowel went 20.00 No 16.16

75mm dia to pipes.(B) 75mm dia.

66 Providing and fixing in PVC SWR cowel went 21.00 No 29.29

110mm dia to pipes.(B) 110mm dia.

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

67 Providing and fixing PVC SWR Nahni trap IS 102.00 No 571.08

14735 for drain - 100 mm diameter with jali of

the following nominal diameter of self cleansing

design with C.I scread down or hinged grating

including the cost of cutting and making good the

68 Providing and fixing white/colour wash down 50.00 No 15251.00

Wall Hung EWC of approved make CERA /

Jaquar / equivalent premium quality, complete

with seat cover, having integral ‘P’ or ‘S’ trap,

including jointing the trap with PVC/CI soil pipe

in cement mortar 1:1, including all necessary

fittings. The item shall also include PVC combi

dual flush low-level flushing cistern of 10.0 litres

capacity with all accessories, Metropole Flush

Valve (Dual Flow) 40 mm size, and Hand Shower

(Health Faucet) with 8 mm dia, 1.20 m long

flexible tube and wall hook, complete in all

respects. Rate shall include all materials, labour,

fixing, testing, and making good the

surroundings. The brand shall be strictly as per

given specification or equivalent, or as directed by

the Engineer-in-Charge.

69 Providing and fixing stainless steel grab 16.00 Set 16427.65

bars/hand rails of approved make CERA /

Jaquar or equivalent, heavy-duty quality,

satin/matt finish, suitable for accessible toilets,

including all necessary wall mounting brackets,

screws, rawl plugs, anchors and fixing

accessories, complete as directed. The item shall

include (a) straight grab bar of 350 mm length, (b)

L-shaped grab bar with approximate overall size

600 mm × 600 mm, and (c) U-shaped grab rail

with hinge of approximate length 700 mm, fixed

securely on wall/floor as required, complete in all

respects as per manufacturer’s specifications and

as directed by Engineer-in-Charge.

70 Providing and fixing ball cock of approved. quality 10.00 No 189.84

as directed.(A) Copper Metal (ii) 50mm dia.

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

71 Providing and fixing flat back wash basin full set 43.00 No 11887.70

with half pedestal, height 405 mm, CERA brand

or equivalent, wall-mounted, size 460 × 345 ×

155 mm, snow white, including C.I. or M.S.

brackets, cutting holes, and making good the

surface. Complete with CERA or equivalent waste

coupling full thread, C.P. brass extension nipple

62 mm long, S.S. flange, 60 cm long water supply

connection pipe, and full thread waste coupling.

Also providing and fixing Angle Stop Cock,

JAQUAR brand, 15 mm dia with C.P. brass

extension nipple 62 mm long, and Pillar Cock,

JAQUAR brand, 15 mm dia with C.P. brass

extension nipple 62 mm long, including all

necessary fittings, jointing, and making good. All

work to be CERA / JAQUAR or equivalent, or as

per directed Engineer-in-Charge.

72 Providing and fixing 600mm x 450mm bevelled 44.00 No 833.73

edge mirrror of superior glass mounted on 6mm

thick A.C. sheet or plywood sheet and fixing to

wooden pluge with C.P. brass screws and

73 Providing and fixing 1.5 m × 0.9m bevelled edge 44.00 No 4165.49

mirror of superior quality glass, mounted on

mm thick A.C. sheet or plywood, and securely

fixed to wooden plugs with C.P. brass screws and

washers, complete with all necessary fittings,

fixtures, labour, and making good the

74 Providing and fixing Towel Ring Round with 44.00 No 1103.93

Round Flange jaquar including necessary S.S.

screw and labour etc. complete. The BRAND

should be as per given specification or Equivalent

or as per directed engineer incharge

75 Providing and fixing Bib cock long nose with wall 142.00 No 3136.05

flange and aerator CERA or Equivelent on wall

with all Laboure, fittings and accassary charges

etc. completed,The BRAND should be as per given

specification or Equivalent or as per directed

engineer incharge

76 Providing and fixing Angle stop cock JAQUAR or 56.00 No 1277.65

equivelent with 15 mm dia with C.P. brass

extension nipple 62 mm long etc. complete.The

BRAND should be as per given specification or

Equivalent or as per directed engineer incharge

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

77 Providing and fixing urinal, flat back, size 420 × 44.00 No 9477.84

395 × 635 mm, CERA brand or equivalent,

including connection with trap, waste coupling

full thread, and integral longitudinal flush pipe.

Complete with CERA auto-closing concealed

urinal flush valve, brass, C.P. brass extension

nipples, necessary brackets, wall supports, and

all other required fittings, jointing, and making

good the surface. All work to be CERA /

equivalent, or as directed by the Engineer-in-

78 Providing and fixing Shop dish of approved 58.00 No 580.75

quality including cost of all accessories such as

bolts, nuts required for above fittings and labor

charges etc. completed as per directed engineer

79 Providing laying and jointing in true line and level 590.00 Rmt 1127.16

200mm dia. Form core Pipe for drainage

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on existing structure,

Wall or ground with the help of clamp or shall be

canceled as directed including necessary fittings,

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of

80 Providing and fixing S.W. gully trap with C.I. 20.00 No 1246.92

grating brick masonry chamber and water tight

C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight (i) Square mouth

traps (B) 150mm x 100mm size P or R type

81 Constructing brick masonry chamber for 50.00 No 3975.36

underground C.I. Inspection C.I. Inspection

chamber and bends with briocks having croshing

strength not less than 35Kg. Cm2 in C.M. 1:5

precast RCC cover 500mmx 700mm intenal

dimensions with frame (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded

stone aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of

neat cement on walls and bed concrete etc.

complete (i) Inside dimensions 500mmx 700mm

and 450mm deep for single pipe line.

82 Extra over items for every additional depth of 50.00 No 264.86

0.1M. of part thereof beyond 450mm depth for

Brick masonry chamber.(i) for 500mm x 700mm

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

83 Providing and fixing MS Ladder of required 2100.00 Kg 92.92

pattern with MS flats(30x3mm) or round or

square bars (12mm) at required spacing & with

round headed bolts and nuts or screws or

welding including primer coat of approved quality

and two coats of oil paintas as directed by

engineer in charge

84 Providing and fixing in position collapsible steel 121.00 Smt 5445.14

shutters with vertical channels 20 x 10 x 2 mm

braced with flat iron diagonals 20 x 5 mm size

with top and bottom rails of T_rin 40x 40 x 6 mm

with 38mm dia, steel pulleys complete with bolts,

nuts, locking arrangements, stoppers handles

including applying a priming coat of red lead

85 Constructing Kitchen Platform of 18 mm thick 9.00 Smt 6183.22

Polished Black Granite at top and 25 mm thick

Kota stone slab one side polished at bottom with

cementing Materials / adhsives including

makeing necessary grooves in walls with Vertical

sandwich two Kotastone 25 mm support every

60 cm centre to centre or as required including

all labour material of approved quality incl. full

moulded round front edge granite strip of one

side polished and jointed with grey cement slurry

including rubbing and polishing etc. complete

86 Providing and fixing 25 mm thick polished kota 30.00 Smt 667.61

stone Shalve with full round edge and double side

polished of any required and fixing with cement

slurry & adhesive including both exposed edges

cut and Smooth Finished as directed by

engineering in charge etc. complete.

87 Providing and fixing Kitchen sink with C.I. or 4.00 No. 5355.02

M.S. brackets, painted white including cutting

holes in walls and making good the same but

excluding fittings. (C) Vitreous China Sink.(i)

600mm x 450mm x 150mm size including pillar

cock 15mm, M.I fisher union 32mm, C.P Brass

waste 32mm , Angle cock 15mm including all

laboure and material charges etc. completed.

88 Providing and fixing Kitchen platform trolley 5.00 Smt 14411.69

having three drawers of SS (IS 304) of required

size like thali, katleri, perforated, partition,

cupsosar type in kitchen platform having drawer

front side and backside by using 19mm thick all

proof plywood of ISI quality all side laminated

etc. as directed. The size of SS (IS 304) basket of

size 4" to 18" for thali, dish, katleri, perforated,

partition, cupsosar type as directed including

necessary S.S. fittings, handles, nobs, telescopic

channels, etc. as directed

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

89 Providing & Fixing Counter Wash Basin into 18.00 Smt 14178.48

platform of 600 mm wide using Top 18 mm thick

granite of approved shade and sample and

bottom 25 mm thick single side Polished kota

stone with 25 mm thick screed of cement mortar

1:3 With granite Facia Patti . The stone shall be

fixed by chassing in to the wall surface and

supported vertically with 18mm thick

granitestone support including Wash Basin 550 x

425 x 180 mm waste brass coupling, stainless

steel extension nipple, flexible PVC outlay pipe,

Casted Swinging Spout etc complete as

suggested by Architect/Engineer-in-charge. The

BRAND should be as per given specification or

Equivalent or as per directed engineer incharge

90 Providing and fixing in position 300 mm high, 71.00 Smt 7787.10

150 mm wide English letters made from 1.0 mm

thick stainless steel sheet as directed by Engineer

in charge with all necessary tools & plants etc.

91 Design, supply & installation of Name/Number 72.00 Smt 9597.02

Plate including lettering made of polyvinayl of

approved color on 1 mm thick stainless steel (S.S

316 ) sheet as approved by Architect or Engineer-

in-charge. For all floor

92 Providing and fixing G.I. louvered elevation duct 150.00 Smt 2308.86

as per approved drawing and reference image,

using G.I. sheet 0.55mm thick louvers of 0.114 m

width formed from approved gauge G.I. sheet,

fixed to a 55mm microne powder-coated G.I.

channel frame of weight 3.06 kg per metre on

both vertical sides, including necessary opening

mechanism, stiffeners, brackets, fasteners,

sealing, scaffolding, and all materials and labour

required to complete the work in proper line,

level, and alignment as per site instructions,

measured in square metres of finished elevation

93 Providing and fixing MS Z clamp on Wall or 1195.00 No 85.85

celling for Pipe Fitting including all type

necessary fittings and accessory etc. completed

as per directed engineer in charge.

94 Charges for making holes from 50mm to 160mm 27.00 Rmt 2255.33

dia in RCC wall, slabs, or any other RCC

members or brickwork by diamond core cutting

machine of HILTI or equivalent, including filling

with approved chemical grouting, finishing the

surface, disposing of debris from all floors,

complete in all respects as directed.

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

95 Providing and fixing coloured self adhesive PU- 105.00 Smt 4618.73

Tactile tile, ground surface indicators of

Polyurethane) of size 300mm x 300mm for

guiding/warning to the visually visitors in the

centre/side of the pedestrian/approach pathway

as per specification and guidelines complete in all

respect to the entire satisfaction of in charge.

96 Providing and fixing acrylic multilingual Braille 140.00 No 1707.91

(raised dots) DIRECTIONAL SIGNBOARDS of size

225 x 150mm designed as per accessibility

standards and having 3.5mm thick acrylic base

plate with Upper Case San Serif words made of

white acrylic non glare cut out letters of height

15mm raised not less than 0.8mm above base

plate and the equivalent word written in Hindi

with Devanagari non glare acrylic letters of height

15mm raised not less than 0.8mm above base

plate and having a non-glare acrylic cut arrow

pointing in the required direction. Each signboard

to be fixed as per manufacturers specifications on

the wall at the approved location and at a height

of 1200mm from FFL complete as per design /

specifications and guidelines as per the entire

satisfaction of the Engineer-in-charge

97 Providing & fixing Braile indicator of size 170 mm 140.00 Rmt 842.34

x 35mm for handrails of the approved design

and make have braile dots raised 0.5 mm above

base plate to be installed at specific locations as

per direction of engineer in charge

98 Providing and Fixing 15 mm thick 300 mm x 300 24.00 Smt 1247.35

mm Tactile Warning Tiles (Attention Tiles i.e.

Tactile Warning Surface Indicator {TWSI}) of

Johnsan Endura Tac Button Yellow Plus or

equvqlent make in flooring laid on 20 mm thick

cement mortar 1:6 (1 cement : 6 coarse sand) on

new surface and jointed with cement slurry

including finished with flush pointing & cleaning

the surface for all floors as per detailed drawing

etc. complete as directed by Architect or Engineer

in charge. Thse tiles shall be Anti Skid, Chemical

Resistant, Fade Proof, Frost - Heat & Weather

Proof, High Flexural Strength, Highly Durable,

Stain Resistance . All Tactile Warning Tiles meet

the specific size and dimension standards as

required by ISO/FDIS

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

99 Providing and laying and fixing 50 mm thick 416.00 Smt 1491.03

expansion joint by hydro cell semi rigid UV

resistance with high performance laminated

closed cell polythene foam joint filler in sheet

foam as directed, etc. complete.

100 Applying and providing Expansion joint sealing 85.00 Rmt 4772.00

System on 100 mm vide joint including cleaning

of exansion joint by mechanical means provision

of adhesive and flexible membrane with required

bond length as per menufracturer specification

and 4mm thick alluminium strip covering with

one side sloted and bolted with suitable system,

inclusive of all manpower, machinery and

material as per specification and as directed.

101 Providing and filling the expansion joint by 773.00 Rmt 515.39

Thioflex 600 polymer or equivalent confirm to BS

4254-1983 as per required shade and

manufactured specifi-cation by making groove of

50 mm x 12.5 mm lather by cutting or by

repairing groove and removing mortar drop or any

other foreign materials including applying primer

and filling required size (oversize of joint PU foam

102 Providing and fixing 25 cm Wide & 3mm thick 773.00 Rmt 1054.34

exterior composite panel on existing expansion

joint horizontally & vertically with all material,

hardware, acessories & fittings etc completed.

103 12mm/16mm Rebar, excluding bar. It should 280.00 Nos 295.93

minimum 160mm embedded in concrete, drill

dia. Should be minimum 16mm/20mm for rebar,

material should be used Will Fischer FISV 360 or

equievalent. (Pull out strength check should be

given by contractor as per technical specification)

104 10mm/8mm Rebar, excluding bar. It should 280.00 Nos 207.05

minimum 120mm embedded in concrete, drill

dia. Should be minimum 12mm/10mm for rebar,

material should be used Will Fischer FISV 360 or

equievalent. (Pull out strength check should be

given by contractor as per technical specification)

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

105 Providing, fabricating, and fixing Glass Reinforced 22.00 Smt 7034.65

Concrete (GRC) Railing of approved design,

pattern, and profile, factory-cast using M25 grade

cement concrete with alkali-resistant (AR) glass

fibre (minimum 5% by weight of cement), fine

aggregates, polymer additives, and admixtures, in

minimum 30 mm thickness (or as specified), with

smooth moulded finish free from defects or

deformities, fixed in position using stainless steel

(SS) brackets, clamps, or mechanical anchors

with non-shrink grout or polymer-modified

cementitious adhesive as per manufacturer’s

specification, including design approval,

moulding, de-moulding, curing, transportation,

handling, scaffolding, installation, alignment,

joint filling, cleaning, and finishing, complete in

all respects as per drawings and direction of

Engineer-in-Charge.

106 Providing, fabricating, and fixing Glass Reinforced 322.00 Smt 7901.23

Concrete (GRC) Cornice / Patta and Cladding of

approved design, profile, and pattern, factory-cast

using M25 grade cement concrete with alkali-

resistant (AR) glass fibre (minimum 5% by weight

of cement), fine aggregates, polymer additives,

and admixtures, in minimum 30 mm thickness

(or as specified), with smooth moulded finish free

from cracks, air pockets, or deformities, fixed in

position using stainless steel (SS) brackets,

clamps, or mechanical anchors with non-shrink

grout or polymer-modified cementitious adhesive

as per manufacturer’s specification, including

design approval, mould preparation, moulding, de-

moulding, curing, edge treatment, transportation,

handling, scaffolding, installation, alignment,

joint filling, cleaning, and finishing, complete in

all respects as per drawings and direction of

Engineer-in-Charge.

107 Providing and fixing decorative round teakwood 5.00 No 55744.93

finial and fascia pillar at rooftop of size 0.30 m

diameter and 3.70 m height, made from seasoned

first-class teakwood, machine finished with

smooth surface, carved to required profile and

design, polished with exterior-grade protective

coating, and securely fixed in position with

stainless steel holdfasts, anchor bolts, and base

plates, including scaffolding, handling,

transportation, erection, and finishing complete

in all respects as per drawing and direction of the

Engineer-in-Charge.

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

108 Providing and applying plaster embossed patta on 2767.00 Smt 371.68

building elevation in cement mortar 1:3 (1 cement

: 3 fine sand), 200 mm thick, formed to required

profile, shape, and size as per architectural

drawings, finished smooth and true to line and

level with moulded / embossed decorative

pattern, curing, scaffolding, cutting, finishing of

edges, and all labour, materials, tools, and

tackles, complete in all respects and at all

heights, as directed by the Engineer-in-Charge.

109 Extra for additional height of propping and 13020.00 Smt 390.34

centering where the height of propping and

centering exceeds 4 .O M between supporting

floor to ceiling including temporary brick or stone

pillars for supporting as required. (iii) Height

more than 4.0 M. and upto 5.0 M

110 Providing and applying two or more coats of 2767.00 Smt 267.65

synthetic enamel paint of approved brand and

shade on new plastered/concrete/wood/steel

surfaces, over one coat of appropriate primer,

including surface preparation, putty/stopping,

scaffolding, curing and finishing complete, all

heights, as directed by Engineer-in-Charge.

111 Providing and fixing wooden carving patta at 20.00 Smt 38420.40

sloping roof, made from teakwood of approved

quality, carved with decorative pattern as per

architectural design, minimum section 0.30m

width x 0.030m thick or as specified, fixed in

position with stainless steel screws, holdfasts,

nails, and adhesive as required, including

cutting, shaping, finishing with smooth surface,

polishing/painting with exterior grade protective

coating, scaffolding, handling, transportation,

and erection complete in all respects as per

drawing and direction of Engineer-in-charge.

112 Providing and applying black japan treatment of 1450.00 Smt 86.39

approved make and quality in two coats with

uniform finish and complete coverage, over

prepared surface free from dust, grease, or loose

particles. Surface shall be cleaned thoroughly

before application. The treatment shall be applied

with brushes only as per manufacturer's

specifications and allowed to dry between coats.

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

113 Providing and fixing hollow metal door with frame 193.00 Smt 4974.16

made from galvanized iron (GI) sheets, ensuring

stability and integrity. The door leaf shall be 30 to

35mm thick, double skin, fabricated from 1.2mm

thick GI sheet with honeycomb infill, and finished

with powder coating in approved shade. The

frame shall be 100x50mm single rebate profile

made from 1.5mm thick GI sheet with inbuilt

groove, powder coated to match. Door shall be

fitted with stainless steel hinges (4 nos. per

shutter), aluminum handles, and door magnets to

retain the door in closed position. The door

should open up to 170 degrees for ease of access.

All components shall be factory prepped, field

assembled, and installed complete with all

necessary hardware, accessories, and fixings as

per manufacturer’s specifications.

114 Providing and fixing eco-friendly light weight calcium 2088.00 Smt 1648.96

silicate false ceiling tiles having Tegular edge & 15 mm

Thick Densified edges on the Tile Periphery for Extra

Strength The Light weight calcium silicate ceiling tiles

shall have, light reflection 85% non-combustible as per

B.S. 476 part IV, 100% humidity resistance and also

having thermal conductivity0.043° w/m KC.for the best

thermal Insulation. The Light weight calcium Silicate tile

shall be of approved texture Fine fissured/ Spintone/

Cosmos having NRC value of 0.5 & Globe having NRC

value of 0.75 NRC or equivalent of size 595 X 595 mm to

be laid on true horizontal level suspended inter locking

metal grid of hot dipped galvanized steel sections

(galvanizing @120 grams per sqm including both side)

consisting of main ‘T’ runner suitably spaced at joints to

get required length and size of 24 X 38mm made from

0.30 mm thick (minimum) sheet, 1200mm centre to

centre, and cross ‘T’ of size 24 X 28mm made out of

0.33mm (Minimum) sheet spaced 1200mm along spaced

between main 'T' at 600mm centre to centre to form

agrid of 1200x600mm and size 24x48mm made of

0.30mm thick (Minimum) sheet to be interlocked at

middle of the 1200x600mm panel to form grid of size

600x600mm resting on periphery walls/partitions on a

perimeter wall angle pre-coated steel of size

(24x24x3000mm made of 0.40mm thick (minimum)

sheet with the help of rawl plugs at 450mm centre to

centre with 25mm long dry wall screws @ 230mm

interval and laying 15mm thick densified edges light

weight calcium silicate ceiling tiles of approved texture

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

weight calcium silicate ceiling tiles of approved texture

(Fine fissured/Cosmos/Spintone) in the grid including

cutting/making opening for services like diffusers, grills,

light fittings, fixtures, smoke dtectors etc., wheneveer

required, Main 'T' runners to be suspended from ceiling

using G.I. slotted cleats of size 25x35x1.6mm fixed to

ceiling with 12.5mm dia and 50mm long dash

fasterners, 4mm G.I. adjustable rods with galvanized

steel evel clips of size 85x30x0.8mm, spaced at 1200mm

center to centre long main 'T' bottom exposed with

24mm of all T-sections and also provide additional frame

work and suspended G.I. support as required height

shall be pre-painted with polyester baked paint, for all

heights, as per specifications, drawings and as directed

by engineer-in-charge. Note:- Only calcium silicate false

ceiling area will be measured from wall to wall. No

deducation shall be made for exposed frames/opening

(cut outs) having area less than 0.30sqm. The calcium

silicate ceiling tiles shall fissured/Spintone/Cosmos and

0.75 NRC for Globe, light reflection 85% non-

combustible as per B.S. 476 part IV, 100% humidity

resistance and also having thermal conductivity.

w/m KC for the best thermal Insulation.

115 Excavation for foundation for depth from 3.0 m 366.00 Smt 174.23

to 5.0 m including sorting out and stacking

of useful materials and disposing off the

excavated stuff upto All lift and lead.(B)

Dense or Hard soil

116 Providing and fixing C.I. Manhole cover 0.60 M. x 4.00 No 958.17

0.45M. size having weight not less than 35Kg.

117 Providing and fixing rolling shutters of approved 10.00 Sqm 3503.41

make made of 80 mm wide M.S laths inter-locked

together through heir entire length and jointed

together at the ends by end locks mounted on

specially designed pipe shaft with bracket

plates,guide channels and arrangement for inside

and outside locking with push-pull operation

including the cost of hood cover and sprig

etc.complete(A) Shutters having width below 3.5M

118 Drilling pilot borehole of size 250/300 mm at 500.00 Rmt 573.68

above site by mud flush direct rotery rig.

119 Reaming of 250/300 mm dia.Pilot borehole to size 500.00 Rmt 349.46

550 mm dia. Incliding assembling ,lowering

housing ,casing strainerpipers with gravel

packing and clayball packing etc.

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

120 Development of cach water bearingzone coming 2.00 Job 27191.22

across the full depth of tubewell by lowering

mm dia.Droplineand 32 mm dia airline for each

water bearing Zone with suitabale capacity air

compressar up to avilability of sand free

121 900 CFM /200 PSI capacity air compressar upto 2.00 Job 27603.30

the availability of sand free discharge for upto

122 Supply of M.S. E.R.W. plain end medium duty 500.00 Rmt 3605.70

pipe confirming to IS 4270/2001 with latest

amendments Of size 250 mm dia (minmum

thicknes of 7.1 mm)

123 Screen Slotting of MS ERW balnce pipe with size 978332.00 slots 0.24

of slot 6.75 cm X 6.35 cm X 3.12 mm for 250 mm

124 Supply of miscellenious bore material suitable to 2.00 Pair 2037.91

250 mm dia pipes as following (A) MS Bore

clamps made from M.S. plate with 3 holes on

either side with nuts & bolts of std make of size

900X100X16 mm flat suitable for 250 mm dia

125 Supply of miscellenious bore material suitable to 2.00 No 1161.62

250 mm dia pipes as following (B) MS Bore Plug

having 100mm height made from M.S. plate with

3 holes at equal distance on circumferrence for

nut-bolts type, locking arrrangement with nuts-

bolts & lock nuts of std make complete from

mm thick M.S. plate suitable for 250mm dia

126 Supply of miscellenious bore material suitable to 2.00 No 1065.02

250 mm dia pipes as following (C) MS Bail Plug

having length 0.45 mtr from medium class pipe

as per I.S. suitable for 250 mm dia pipe.

127 Supply of miscellenious bore material suitable to 250.00 NO 91.71

250 mm dia pipes as following (D) Steel bent

plate suitable for ERW pipe for 250mm dia

(size:200 X 150X6 mm)

128 Supply of GRAVEL OF selected size 4 mm to 6mm 80.00 Cmt 2049.29

129 Electrologging of Pilot bore hole with carting. 2.00 Job 18180.00

130 Geohydrological ground water investigation 2.00 No 14428.86

including vehicle charges for three phase DTH

bore/DR tube well including water sample testing

& chemical analysis

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

131 Providing, supplying and commissioning ISI mark 2.00 No 5401.48

CI D/F Reflux Valves of following class and

diameter including all taxes, insurance,

transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to

departmental stores stacking etc. complete.

Reflux valves PN 1 IS 5312 with ISI mark size:

132 Manufacture, supply and delivery of following ISI 500.00 Rmt 152.51

marked HDPE pipes (IS:4984/1985 with latest

amendment) having material Grade PE-80 in

approximate 100 meter coil length or as per

GWSSB requirement with SS 316 nipple at both

ends having 11 TPI threads as per specifications,

press fitted and bolted having nominal diameter

as under as per detailed technical specifications.

133 Constructing manhole with R.C.C top slab in 20.00 No. 12970.07

1:2:4 mix (1 cement : 2 coarse sand : 4 graded

stone aggregate 20 mm nominal size) foundation

concrte 1:3:6 mix (1 cement : 3 coarse sand :

brick bats 40 to 50 mm nominal size) inside

plastering 15 mm thick with cement mortar 1:5 (1

cement : 5 coarse sand) finished with a floating

coat of neat cement slurry and making channels

in cement concrte 1:2:4 mix ( 1 cement : 2 coarse

sand : 4 stone aggregate 20 mm nominal size)

finished smooth complete including curing &

testing (I) Inside size 900 mm x 1200 mm and

1.50 meter deep including FRC cover with frame

size 560 mm diameter (A) with 230 mm thick

walls of brick masonry using bricks having

crushing strength not less than 35 Kg / Sqcm in

cement mortar 1:5 (1 cement : 5 coarse sand) (1)

A-type depth 0.90 meter for 150 mm diameter

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

134 Constructing manhole with R.C.C top slab in 20.00 No. 21270.56

1:2:4 mix (1 cement : 2 coarse sand : 4 graded

stone aggregate 20 mm nominal size) foundation

concrte 1:3:6 mix (1 cement : 3 coarse sand :

brick bats 40 to 50 mm nominal size) inside

plastering 15 mm thick with cement mortar 1:5 (1

cement : 5 coarse sand) finished with a floating

coat of neat cement slurry and making channels

in cement concrte 1:2:4 mix ( 1 cement : 2 coarse

sand : 4 stone aggregate 20 mm nominal size)

finished smooth complete including curing &

testing (I) Inside size 900 mm x 1200 mm and

1.50 meter deep including FRC cover with frame

size 560 mm diameter (A) with 230 mm thick

walls of brick masonry using bricks having

crushing strength not less than 35 Kg / Sqcm in

cement mortar 1:5 (1 cement : 5 coarse sand) (2)

B-type depth 1.50 meter for 300 mm diameter

135 Constructing manhole with R.C.C top slab in 20.00 No. 21270.56

1:2:4 mix (1 cement : 2 coarse sand : 4 graded

stone aggregate 20 mm nominal size) foundation

concrte 1:3:6 mix (1 cement : 3 coarse sand :

brick bats 40 to 50 mm nominal size) inside

plastering 15 mm thick with cement mortar 1:5 (1

cement : 5 coarse sand) finished with a floating

coat of neat cement slurry and making channels

in cement concrte 1:2:4 mix ( 1 cement : 2 coarse

sand : 4 stone aggregate 20 mm nominal size)

finished smooth complete including curing &

testing (I) Inside size 900 mm x 1200 mm and

1.50 meter deep including FRC cover with frame

size 560 mm diameter (A) with 230 mm thick

walls of brick masonry using bricks having

crushing strength not less than 35 Kg / Sqcm in

cement mortar 1:5 (1 cement : 5 coarse sand) (3)

C-type depth 2.25 meter for 300 mm diameter

136 Extra rate for constructing B.B masonry for every 20.00 No. 522.96

additional depth 0.10 meter or part thereof over

item 24.27 (I) for depth from 0.90 meter to

137 Extra rate for constructing B.B masonry for every 20.00 No. 397.10

additional depth 0.10 meter or part thereof over

item 24.27 (II) for depth from 1.50 meter to

138 Extra rate for constructing B.B masonry for every 20.00 No. 550.42

additional depth 0.10 meter or part thereof over

item 24.27 (III) for depth from 2.25 meter to

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

139 Providing laying (to level or slopes) and jointing 735.00 Rmt. 665.48

reinforced concrete Light duty non-pressure pipes

I.S. class NP2 of the following internal diameter

with collars and butt ends prepared for collar

joints including testing of joints complete.(D)

140 Providing and fixing and floor 10.0 Kg. F/Cm2 520.00 Rmt 336.24

working pressure poluthene pipes of the following

outside Dia. Low densidy, complete with special

falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and

floor.(G)110 mm

141 Providing and fixing and floor 10.0 Kg. F/Cm2 110.00 Rmt 696.90

working pressure poluthene pipes of the following

outside Dia. Low densidy, complete with special

falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and

floor.(G)180 mm

142 Providing junction for rain water juncton 72.00 No 9357.65

chamber of size 0.60x0.60x0.75m with excavation

of size 1.96x1.96 m & 0.15m thick c.c.1:2:4 bed

concrete including brick masonary wall in CM 1:6

of 0.75m height & 0.23m thick with 15mm thick

cement plaster inside & outside & 1.06x1.06

RCC (1:2:4) slab of thickness 0.15m with CRS

steel and 0.60mx0.45m cast iron manhole cover

with frame weight not less than 35 kg as per

directed by Engineer-in-charge

143 Providing and laying precast RCC 50mm thick 20.00 Cmt 10918.10

cement concrete1:2:4 (1 cement : 2 coarse sand :

4 crushed stone aggregates 20 mm. nominal size)

cover of chamber including finishing with a

floating coat of neat cement slurry including cost

of TMT bar and cost of from work curing etc

144 Supplying and laying of screened rounded gravel 553.00 Cmt 951.42

of 25 to 90 mm, 20 to 50 mm and 5 to 20 mm

size filling in layers or packing around stainer

pipe etc.complete.

145 Drilling of min. 250 mm dia. bore hole in all 200.00 Rmt 1138.27

strata including dualover burden strata by

combination DR/DTH rig including lowering

mm dia MS ERW pipes in bore hole and testing

etc.all work as per directed engineer incharge.

146 Providing and lowering jointing 6kg/cm2 PVC 200.00 Rmt 2190.69

strainer pipe 250 mm diameter HDP first class

confirming with IS : 4935 including cost of outer

camp solution etc.complete.

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

147 Construction of granular sub-base 150 mm thick 171.00 Cmt 1705.89

by providing coarse graded machine crushed B.T.

material satisfying MOST specification of grading

I (B.T. stone aggregate 53 mm to 26.5 mm 35 %,

26.5 to 4.75 mm - 45 % and 2.36 mm below -

% )including spreading in uniform layer with

motor grader on prepared surface, mixing by mix

in place method with rotavator at OMC and

compacting with vibratory roller to achieve the

desired density etc. complete.

148 Steel work, welded in built up sections framed 4500.00 Kg 84.13

work including cutting, hoisting, fixing in position

and applying a priming coat of read lead paint &

two coat oil paint. (A)In beams and joists,

channels angles Tees, flats, with connecting

plates or angle cleats as in main and cross

beams. Hip and jack rafters, purlins conneted to

common rafters and the like..

149 Providing and fixing of Ridge flashing for roof 158.00 Smt 858.67

panel shall be made out of 0.5 mm thick pre

coated GI sheet . The Precoated sheet shall be of

minimum 240 mpa steel grade confirming to IS

14246:1995 and shall have zinc coating of

minimum 120 gsm as per IS:277:1992 , 5-7

microns epoxy primer on both side of the sheet

and polyester top coat 15-18 micron. The PPGI

Sheet shall have plastic protective guard film of

minimum 25 microns to avoid scratches during

transportation. The ridge shall be fixed to the

steel members by pop rivet or self drilling/self

stitching fastners @ maximum 450 mm c/c along

length of capping/flashing etc complete .

150 Providing and fixing pre-cast Rubber Dye / steel 285.00 Smt 686.90

Dye inter locking concrete block 60mm thick with

grade of concrete M300 pnumatic compressed /

vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm

Sand layer for levelling and filling the joint with

sand in proper line and level as per guidlines of

IRC : SP 63-2018 etc. Complete

151 Providing and fixing pre-cast concrete kerb stone 206.00 Rmt 361.64

of gray cement based concrete block 30cm

ength,30cm height and 15cm thick of M250 grade

concret as per approved design and including

excavation for fixing in proper line and level,filling

the joint with C:M 1:3 (1cement:3fine sand) etc

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

152 Box cutting the road surface to proper slope and 410.00 Cmt 102.93

camber for making a base for road work including

removing the excavated stuff and depositing on

the road side slope as directed upto upto All lift

153 Providing, laying and compacting natural sand & 57.00 Cmt 383.80

gravel[ C.B.R. not less than 20%] below sub base

course including carriage of materials spreading

in uniform layer manually on prepared base and

compacted with vibratory roller to achieve desired

density including all materials, labour etc.

154 Compaction and finishing of cement concrete 570.00 Smt 67.67

road by Trimix (Vacuum Dewatering) process,

including deployment of additional labour, use of

vacuum dewatering pump, screed vibrator,

floater, and surface vibrators. The work shall

include removal of excess water, densification of

concrete, surface leveling, and finishing to

required camber and line. Further, forming of

grooves (transverse/longitudinal) and providing

rough/non-skid finish to the surface, complete in

all respects as per specifications and directions of

Engineer-in-charge.

155 Supply, installation, testing & commissioning of 1.00 No. 238860.96

ISI approved electrical motor operated Kirloskar

make fire hydrant main pump set horizontal end

suction back pull out top discharge centrifugal

fire pump set with all the standard acessories,

base frame, coupling, and foundation bolts with

following specifications

Model -DB 80/26, Flow-137 m3/hr,

Motor Rating -45KW/60HP/3 ph

Suc x Del - 100 x

156 Supplying, installing, testing and commissioning 1.00 No. 504743.46

of Kirloskar make diesel engine driven fire

hydrant pump set, suitable for automatic

operation and consisting of horizontal type

centrifugal end suction back pull-out, top

discharge pump with cast iron body and bronze

impeller, mounted on M.S. fabricated common

base plate with coupling, coupling guard,

foundation bolts and all necessary accessories,

complete as required. The pump shall be of Model

KFE, having a discharge capacity of 137 m³/hr at

70 meters head, driven by a 62 HP diesel engine,

3 phase, with suction and delivery size of 125 mm

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

157 Fire Hydrant Panel suitable for 10 HP Jockey 1.00 No. 164125.00

Pump, 60 HP (137 m³/hr @ 70 m head) Main

Electrical Pump and 62 HP (137 m³/hr @ 70 m

head) Diesel Engine Operated Pump, consisting of

Incomer with MCCB (1 No.), R Y B Indication (1

Set) and VAF Digital Meter (1 Set); Outgoing with

F1 – 60 HP Star Delta Starter for Main Pump, F2

– 10 HP DOL Starter for Jockey Pump, F3 – Auto

On/Off Diesel Pump with Battery Charger,

Control Circuit with Auto/Manual On/Off,

On/Off Trip Indication and On/Off Push Button;

Fabrication duly powder coated in PO Red Colour,

fabricated from 14/16 SWG GI Sheet with IP-42

Protection, fixed type floor mounted with bottom

cable entry, complete as required.

158 Supply. installation, testing & commissioning of 1.00 No. 120073.85

ISI approved electrical motor driven jockey pump

set having 10.8 m3/hr. @ 70m head. The pump

unit shall be a horizontally direct mounted motor.

Unit shall comprise the following minimum

requirements: a) Pump, b) Electric motor IE2, c)

Foundation bolts, d) Mating flanges with gasket

and fasteners, e) Discharge gauges, etc. complete

in all respect, with labour.

159 Supply, installation, testing & commissioning of 1.00 No. 29441.40

Priming tank, HDPE type, 1000 litres, with

necessary piping 100 mm size, G.I pipe for

priming the pumps, pipe of with butterfly valves

for isolation, Water Filling to priming tank by

piping min. 50 mm size, with all complete.

160 Providing and fixing approved make Perforated C 20.00 Rmt 380.77

type cable tray. Made from pre- galvanized sheet

steel. The cable tray should be bended as per IS

2062/1079 . with max 17.5% perforation with

coupler plate / Fish plate and GI hardware like

nut - bolt and washers etc. erected on existing

support as per Specification and as per

instruction of engineer in charge..(3) 150 X 50 X

161 Supplying & erecting XLPE(IS:7098)(I)-88 ISI 40.00 Rmt 144.43

unarmoured copper cable 1.1 KV grade to be

erected as directed of following size. (E) 3 core

2.5 Sq. mm for pressure switch

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

162 Providing and erecting XLPE(IS:7098)(I)-88 ISI 50.00 Rmt 275.73

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cable. (Only

Fire Panel to Fire Pump) (B) 3 core 4 Sq. mm

163 Providing and erecting XLPE(IS:7098)(I)-88 ISI 65.00 Rmt 538.33

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cable. (Only

Fire Panel to Fire Pump) (D) 3 core 10 Sq. mm

(Only Fire Panel to Fire Pump)

164 Providing and erecting XLPE(IS:7098)(I)-88 ISI 150.00 Rmt 229.78

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cable for

Diesel Engine Battery Charger (A) 3 core 2.5Sq.

165 Providing and fixing ISI marked CI D/F sluice 4.00 No. 8600.15

valves as per IS 14846 (lattest edition) of following

class and diameter including all taxes, insurance,

transportation, feight charges, octroi, inspection

charges, loading, unloading, conveyance to the

department store or site etc. complete. (150 mm

166 Providing and fixing 150mm diameter Non return 8.00 No. 12407.85

valve with gunmetal working parts as per IS

167 Providing and fixing ISI marked CI D/F sluice 4.00 No. 5238.87

valves as per IS 14846 (lattest edition) of following

class and diameter including all taxes, insurance,

transportation, feight charges, octroi, inspection

charges, loading, unloading, conveyance to the

department store or site etc. complete. (100 mm

168 Providing and fixing 100mm diameter Non return 8.00 No. 8961.23

valve with gunmetal working parts as per IS

169 Providing and fixing 63mm Gun metal / SS single 20.00 No. 8928.40

outlet type hydrant valve as per IS 5290 with ISI

marked 75 mm inlet and 63mm female

instantaneous coupling rubber washer and cast

iron hand wheel operation with close and open

direction as directed.

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

170 Providing and fixing 63mm dia Gun metal /SS 20.00 No. 4464.20

branch pipe of standard length with 20mm bore

hexagonal No.zzle as per IS 903 with ISI marked

171 Providing and fixing 63mm Parole fire hose of 20.00 No. 9847.50

approved grand conforming to IS 636 type B

having crushing pressure of 37.20 kg/cm 2 of ISI

marked of 15 mtr length fitting with necessary

S.S 63mm delivery hose coupling as IS 903 with

ISI mark bided with GI wire etc complete

172 Mild steel box hose cabinet of 18SWG of suitable 20.00 No. 4090.00

size with looking arrangement and 3mm thick

glass panel to accommodate 1 No.s of hose pipe

(15mtr) and 1 No.. GM / SS branch pipe etc

painting red colors etc as directed.

173 Providing and fixing first aid hose reel wall 24.00 No. 11423.10

mounting fix type having side of the hose reel

made of MS providing with 30mtr long thousand

six length 25mm dia PVC nylon braided flexible

hose with S.S shut off No.zzle of approved quality

etc complete as directed.

174 supplying and installing and conmissing of CI 4.00 No. 33427.97

flanged Y type Strainer with SS mesh suitable

flanges, nuts, bolts, gasskets, etc complete. For

200 mm pipe suction inlet

175 Providing dry chemical powder type fire 42.00 No. 3479.45

extinguishers of 5 kg/Capacity with ISI mark (IS

2171) etc as directed.

176 Providing carbon dioxide type fire ext 4.5KG 42.00 No. 6761.95

capacity with ISI mark

177 Wrapping and coating of 150 mm / 100mm MS 740.00 Rmt 275.73

pipe as per direction of engineer incharge for

protection of MS pipe from the corrosion.

178 Design, supply & installation of safety signage 48.00 Smt 3085.55

made of zinc base glow in the dark rigid sheet

with high lumiNo.us with pasted on 3 mm thick

on rigid PVC foam sheet. Such as EXIT

EMERGENCY EXIT. Do No.t use lift etc.

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

179 supplying and installing Pressure gauge for 10.00 No. 4502.68

Entire System with required fittings including

pressure switch. as per direction of engineer

180 Supply installing Testing & Commissioning of Fire 2.00 No. 36764.00

Alram System with Manual Call Point at eache

floor (G+3) with Hotter and Panel System Set at

ground floor including cost of all wiring.

181 Providing and fixing 65mm diameter Non return 32.00 No. 7146.13

valve with required acessoriesfor UGWT Pump

connection with all required aceessories,

solutions etc. complete

182 Prviding and fixing quartzoind bulbty pe ss 1480.00 No.. 592.37

sprinkler head suitable sustaining pessure on

seat and water hamer effect. The type and

temperature rating shall be as follows

(a) 57 degree sprinkler

183 Providing and fixing 100mm diameter wefer plate 8.00 No.. 3798.11

Non return valve with CI Body and SS Plate

working parts as per IS including.

184 Providing and fixing in postion 25 mm ball valve 10.00 No.. 673.67

to be fixed in Hose Real

185 Providing and fixing 80mm diameter Non return 4.00 No.. 5795.89

valve with CI Body and SS Plate working parts as

per IS including.

186 Supply, installation and testing and 4.00 No.. 13566.32

commissioning of SS - 4 way Fire Brigade in let

connection with 63 mm instantaneous coupling

with isolation valve, plug, cap, chain complete in

all respect etc. complete

187 Providing and fixing Hose Clamp to be fixed in 24.00 No.. 145.19

Hose Real connection etc. complete

188 Providing and fixing Hose Coller to be fixed in 24.00 No.. 580.75

Hose Real connection etc. complete

189 Providing MS air cushion tank on top of each 1.00 No.. 46576.15

riser fabricated from 6mm thick MS plate,

mm in diameter and 1.5 m in height with dished

ends fabricated from 8mm thick MS plate with

Air release valve with stop cock, flanged inlet

connection and drain arrangement with 25mm

dia valve, pressure gauge with gun metal stop

cock complete with all accessories as required

and conforming to IS 4736-1968. (The cushion

tank should be suitable for rated working

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

190 Fixing, testing & commissioning of MS air 1.00 No.. 3554.19

cushion tank on top of each riser fabricated from

6mm thick MS plate, 300 mm in diameter and

1.5 m in height with dished ends fabricated from

8mm thick MS plate with Air release valve

with stop cock, flanged inlet connection and

drain arrangement with 25mm dia valve,

pressure gauge with gun metal stop cock

complete with all accessories as required and

conforming to IS 4736-1968.

191 Providing Foot Valve of of 4" diameter approved 4.00 No.. 22962.86

make including all required accessories etc.

192 Installing, testing and comissioning 4" Foot 4.00 No.. 714.32

Valve including all required accessories etc.

193 Providing Foot Valve of of 6" diameter approved 8.00 No.. 32754.30

make including all required accessories etc.

194 Installing, testing and comissioning 6" Foot 8.00 No.. 789.82

Valve including all required accessories etc.

195 P & Fixing GI Air Release Valve 25 mm set 8.00 No.. 3647.11

including all required accessories etc. complete

196 Supply , installation , testing & commissioning 2.00 No.. 5765.69

of SS 304 25 mm Pressure Safety / Relief Valve

Range 0 - 12 Kg. / Cm2 including pressure

switch. complete with all accessories

197 Supply, fabrication & erection of aboveground 20.00 R.mt 3879.41

G.I. 'C'-Class, ERW piping, conforming to

IS:3589, for size 200 mm dia. & above,

thickness. G.I. pipe fitting's as per IS: 3589, for

size 200 mm dia. above, flanges, nuts bolts &

washers, 3 mm thick gasket, pipe hangers, etc.

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe

support, shall be two coat of zinc primer and two

coats of fire red conf. to IS: 5, Shade

Complete with all accessories as per approved

drawings, specicification and direction of the

Engineer-in-Charge, with all complete.

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

198 Supply, fabrication & erection of aboveground 460.00 R.mt 2779.47

G.I. 'C'-Class, ERW piping, conforming to

IS:1239, part-I, Heavy class 150mm dia.,

thickness. G.I. pipe fitting's as per IS: 1239, part-

II, Heavy class for size 150mm dia. , flanges, nuts

bolts & washers, 3 mm thick gasket, pipe

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe

support, shall be two coat of zinc primer and two

coats of fire red conf. to IS: 5, Shade

Complete with all accessories as per approved

drawings, specicification and direction of the

Engineer-in-Charge, with all complete.

199 Supply, fabrication & erection of aboveground 280.00 R.mt 2479.80

G.I. 'C'-Class, ERW piping, conforming to

IS:1239, part-I, Heavy class 100mm dia.,

thickness. G.I. pipe fitting's as per IS: 1239, part-

II, Heavy class for size 100 mm dia. , flanges,

nuts bolts & washers, 3 mm thick gasket, pipe

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe

support, shall be two coat of zinc primer and two

coats of fire red conf. to IS: 5, Shade

Complete with all accessories as per approved

drawings, specicification and direction of the

Engineer-in-Charge, with all complete.

200 Supply, fabrication & erection of aboveground 185.00 R.mt 1829.36

G.I. 'C'-Class, ERW piping, conforming to

IS:1239, part-I, Heavy class 100mm dia.,

thickness. G.I. pipe fitting's as per IS: 1239, part-

II, Heavy class for size 100 mm dia. , flanges,

nuts bolts & washers, 3 mm thick gasket, pipe

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe

support, shall be two coat of zinc primer and two

coats of fire red conf. to IS: 5, Shade

Complete with all accessories as per approved

drawings, specicification and direction of the

Engineer-in-Charge, with all complete.

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

201 Supply, fabrication & erection of aboveground 40.00 R.mt 1678.37

G.I. 'C'-Class, ERW piping, conforming to

IS:1239, part-I, Heavy class 80mm dia.,

thickness. G.I. pipe fitting's as per IS: 1239, part-

II, Heavy class for size 80 mm dia. , flanges, nuts

bolts & washers, 3 mm thick gasket, pipe

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe

support, shall be two coat of zinc primer and two

coats of fire red conf. to IS: 5, Shade

Complete with all accessories as per approved

drawings, specicification and direction of the

Engineer-in-Charge, with all complete.

202 Supply, fabrication & erection of aboveground 2240.00 R.mt 1231.19

G.I. 'C'-Class, ERW piping, conforming to

IS:1239, part-I, Heavy class 50mm dia.,

thickness. G.I. pipe fitting's as per IS: 1239, part-

II, Heavy class for size 50 mm dia. , flanges, nuts

bolts & washers, 3 mm thick gasket, pipe

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe

support, shall be two coat of zinc primer and two

coats of fire red conf. to IS: 5, Shade

Complete with all accessories as per approved

drawings, specicification and direction of the

Engineer-in-Charge, with all complete.

203 Supply, fabrication & erection of aboveground 1600.00 R.mt 598.17

G.I. 'C'-Class, ERW piping, conforming to

IS:1239, part-I, Heavy class 25mm dia.,

thickness. G.I. pipe fitting's as per IS: 1239, part-

II, Heavy class for size 25 mm dia. , flanges, nuts

bolts & washers, 3 mm thick gasket, pipe

Hydrostatic testing for 2 hour's at 150% of the

system pressure, hook-up etc.

Painting for piping, fittings & structural pipe

support, shall be two coat of zinc primer and two

coats of fire red conf. to IS: 5, Shade

Complete with all accessories as per approved

drawings, specicification and direction of the

Engineer-in-Charge, with all complete.

204 Supply, installation and testing and 8.00 No. 5122.22

commissioning of SS - one way Fire Brigade in let

connection with 63 mm instantaneous coupling

with isolation valve, plug, cap, chain complete in

all respect etc. complete

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

205 5 kg Moduler Fire Extinguisher (Gr. Floor 16.00 No. 3348.30

Electrical Room) including all required

accessories etc. complete

206 Supply, Installation and commissioning of smoke 120.00 No 1271.49

detectors / heat detectors including plung in

base, with complete accessories.

207 Supply, Installation and commissioning of Audio 120.00 No 1329.57

hooters including Pluge in base, with complete

208 Consultancy Fees to Concern Authority for 13180.00 Smt 15.15

Obtaining Plan Approval and including cost of

209 Filling foundation and plinth with murrum or 360.00 Cmt 289.06

selected soil in layer of 20 cm in thickness

including ramming watering and consolidating

210 Providing and laying cement concrete 1:3:6 (1- 10.00 Cum. 3005.76

Cement : 3- coarse sand : 6- Crushed stone

aggregates 40 mm nominal size) and curing

complete excluding cost of formwork in (A)

Foundation and Plinth.

211 Providing and laying cement concrete 1:3:6 (1- 8.00 Cum. 4046.21

Cement : 3- Coarse sand : 6- crushed stone

aggregates 20 mm nominal size) and curing

complete including cost of formwork in (A) Wall

212 Supplying of well rotted FYM manure with all lead 108.00 Cum. 984.75

and Lift including spreading mixing dressing and

rolling with hand roller etc. complete.

213 Scarifying the surface of Soil including spreading 2400.00 Sqm 47.47

of DAP fertilizer mixing with Soil properly levelling

gand dressing of the plot

214 Supplying and planting Dibbing semi carpet lawn 2400.00 Sqm 164.63

at distance of abour 15 cm x 15 cm after proper

anti termite teratment amd rolling the seme by

hand roller amd wetering etc complete.

215 Bowing and developing flowering plants grown in 100.00 No. 328.25

nusery having approximate height 4 to 5 ft or

Height ad per Landscaps Plan with natural

growith of soil packed in polithyline bag or

Earthern pot. Including organic & chemical

fertilizer Pesticides, fungicides, hormones &

maintaining the plants up to three months as

deserted. Bottol palm.

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

216 Bowing and developing flowering plants grown in 50.00 No. 590.85

nusery having approximate height 4 to 5 ft or

Height ad per Landscaps Plan with natural

growith and nature colour planted in alump of

soil packed in polithyline bag or Earthern pot.

Including organic & chemical fertilizer pesticides,

fungicides hormones & maintaining the plants uo

to three months as deserted Trinagle Plan.

217 Bowing and developing flowering plants grown in 100.00 No. 157.56

nusery having approximate height 4 to 5 ft or

Height ad per Landscaps Plan with natural

growith and nature colour planted in alump of

soil packed in polithyline bag or Earthern pot.

Including organic & chemical fertilizer pesticides,

fungicides hormones & maintaining the plants uo

to three months as Jasud

218 Bowing and developing flowering plants grown in 100.00 No. 217.15

nusery having approximate height 4 to 5 ft or

Height ad per Landscaps Plan with natural

growith and nature colour planted in alump of

soil packed in polithyline bag or Earthern pot.

Including organic & chemical fertilizer pesticides,

fungicides hormones & maintaining the plants uo

to three months as Croton

219 Bowing and developing flowering plants grown in 200.00 No. 196.95

nusery having approximate height 4 to 5 ft or

Height ad per Landscaps Plan with natural

growith and nature colour planted in alump of

soil packed in polithyline bag or Earthern pot.

Including organic & chemical fertilizer pesticides,

fungicides hormones & maintaining the plants uo

to three months as deserted green mahindi

220 Bowing and developing flowering plants grown in 200.00 No. 157.56

nusery having approximate height 4 to 5 ft or

Height ad per Landscaps Plan with natural

growith and nature colour planted in alump of

soil packed in polithyline bag or Earthern pot.

Including organic & chemical fertilizer pesticides,

fungicides hormones & maintaining the plants uo

to three months as deserted New block ficus.

221 Labour charges for planting various plantsafter 750.00 No. 105.04

proper anti termite treatment in pits including

placing property and filling the pit with requred

prepared mix soil and wetering and dispporting

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

222 Maintance of the garder for 60 days after 1.00 Job. 104535.00

Complition of 3 month stipulated period is

completed for plantation o lawn and plants

including applying second round of proper

antitermite tretment.

223 Providing and fixing brass screw down stop 8.00 No. 205.83

tap.(A)15mm dia.

224 Providing and fixing 15 mm dia, 15 m long 4.00 No. 1654.38

braided PVC flexible hose pipe of approved make

with connectors and clamps, including 15 mm

dia G.I. nipple, jointing, fixing, testing, and

commissioning, complete in all respects as

Total Civil Amount A =

225 Point wiring for Light / Bell with 2-1.5 sq.mm 2245.00 Pt 485.81

& earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLSH PVC insulated multi

strand copper wires up to 10 mtr length , in

below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth

continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white front

plate modules erected on / in wall / ceiling as

per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as

directed.(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete.Cat-III

226 Point wiring for Individual Plug with & earth wire 49.00 Pt 510.05

of 1.5 sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of

pipe erected complete with Modular type switch

& 5 pin Plug erected on PVC / Metallic/Wooden

box covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected

with following type of accessories.[I] For 6A Plug

and 6 a switch with 2-1.5 sq.mm Cu. Wire from

nearby switchboard/mcb db board (f) with

medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat.III

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

227 Point wiring for Individual Plug with & earth wire 84.00 Pt 745.38

of 1.5 sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of

pipe erected complete with Modular type switch

& 5 pin Plug erected on PVC / Metallic/Wooden

box covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected

with following type of accessories.[II] For 16A Plug

and 16 amp switch with 2-2.5 sq.mm Cu. Wire

from mcb db board. (f) with medium class Rigid

PVC pipe and accessories erected concealed in

wall/ceiling complete Cat.III

228 Point wiring for on board Looped Plug with 6A 293.00 Pt 257.55

Modular type switch & 5 pin socket erected on

PVC / Metallic/Wooden box, single mounting

base frame covered with textured / metallic/white

front plate modules erected on / in wall / ceiling

with following type accessories.Cat-III

229 Providing following type of Modular Type 65.00 Ea 160.59

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with necessary

connections as per site situation directed by

Engineer In charge.

(3) Two Pin/RJ-11 Telephone Socket[A] For One

230 Providing following type of Modular Type 300.00 Ea 25.25

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with necessary

connections as per site situation directed by

Engineer In charge.

(7) Blank Plate Single Cat.III

231 Providing following type of Modular Type 123.00 Ea 160.59

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with necessary

connections as per site situation directed by

Engineer In charge.

(8) Computer RJ-45 socket Cat-III

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

232 Providing and erecting ISI mark Medium class 3500.00 Mtr. 33.33

RIGID PVC PIPES of following size complete to be

erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed

with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed

233 Providing and erecting ISI mark Medium class 150.00 Mtr. 54.54

RIGID PVC PIPES of following size complete to be

erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed

with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed

234 Providing & erecting PVC Corrugated Flexible 200.00 Mtr. 21.21

Conduit with required nos. of coupling, PVC

bushes, Check-nuts etc. complete of following

sizes.(2) 25 mm

235 Providing & erecting PVC Corrugated Flexible 50.00 Mtr. 27.27

Conduit with required nos. of coupling, PVC

bushes, Check-nuts etc. complete of following

236 Supplying under floor pregalvanised corrosion 250.00 Mtr. 1224.12

proof rectangular sheet steel cable trunking of

mm thick having with stand point load up to

Ton & free from seepage of concrete of screed

water with all accessories,Junction Box,Joints as

required and demanded by engineer-incharge and

laying/erecting as per OEM guidelines and as

per instruction of engineer incharge having

following size of dimensions and No of

compartments (W x D x T) Cat-III

[6] 300mm x 25mm x 1.6 mm with Three

237 Providing and erecting Mains with 1.1 KV grade 14460.00 Mtr. 82.82

FRLSH PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe

to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor

FRLSH PVC insulated stranded wire of green

colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and

(b) 2 wire 2.5 sq. mm

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

238 Providing and erecting Mains with 1.1 KV grade 1205.00 Mtr. 112.11

FRLSH PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to

be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLSH PVC insulated stranded

wire of green colour for earth continuity of

(A) with medium class Rigid PVC pipe and

(a) 2 wire 4 sq. mm

239 Providing and erecting Mains with 1.1 KV grade 60.00 Mtr. 147.46

FRLSH PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to

be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLSH PVC insulated stranded

wire of green colour for earth continuity of

(A) with medium class Rigid PVC pipe and

(b) 2 wire 6 sq. mm

240 Providing and erecting Mains with 1.1 KV grade 750.00 Mtr. 425.21

FRLSH PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to

be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLSH PVC insulated stranded

wire of green colour for earth continuity of

(A) with medium class Rigid PVC pipe and

(i) 4 wire 10 sq. mm (use earth wire of 4 sq.mm )

241 providing and erecting Mains with ISI marked, 400.00 Mtr. 300.98

1.5KV FRLSH grade electrolyte multi stranded,

annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size

(Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with

required size of copper lugs, nuts and bolts if

(i) One wire 35.00 sq. mm

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

242 providing and erecting Mains with ISI marked, 280.00 Mtr. 669.63

1.5KV FRLSH grade electrolyte multi stranded,

annealed copper conductor with heat resistant

PVC insulated conforms to IS 694, IEC -

erected in existing pipe of following size

(Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with

required size of copper lugs, nuts and bolts if

(k) One wire 70.00 sq. mm

243 Supplying and erecting Flexible FRLSH PVC 160.00 Mtr. 46.46

insulated multi strand multi core 1.1 kv grade ISI

marked copper wires of following size to be

erected as directed.

e) 1.50 Sq.mm 3 core round PVC sheathed

244 Supplying & erecting approved make Telephone 600.00 Mtr. 20.20

Cable electrolytic copper conductor PE insulation

twisted in two pairs, & wrapped with FRLS PVC

tape & sheathed with FRLS PVC or HFFR outer

Jacket suitable for telephone wiring & confirming

to C-DOT erected in existing pipe. of following size

of conductors & nos.of pairs. With necessary

connections. [A] Conductor Size 0.5 mm (a)

Unarmoured`(2) Two Pairs

245 Supplying & erecting approved make Telephone 150.00 Mtr. 199.98

Cable electrolytic copper conductor PE insulation

twisted in two pairs, & wrapped with FRLS PVC

tape & sheathed with FRLS PVC or HFFR outer

Jacket suitable for telephone wiring & confirming

to C-DOT erected in existing pipe. of following size

of conductors & nos.of pairs. With necessary

connections. [A] Conductor Size 0.5 mm

(b) Armoured [Jelly Filled] (2) Twenty Pairs

246 Supplying & erecting approved make LAN cable of 3690.00 Mtr. 47.47

following size in existing pipe as per direction[C]

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

247 Providing & erecting Switch board for Computer 123.00 Ea 1133.22

or electric apparatus consisting of following

modular type accessories mounted with PVC /

Metallic concealed/open box with single

mounting base frame covered with

textured/metallic /white front plate,modules

erected with necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories.Cat-III

248 Decorative call bell Ting-tong box type 250 volts 12.00 Ea 71.71

complete erected

249 Supplying and erecting LED indoor fittings with 795.00 Ea 373.70

LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion

resistance with diffuser with company

mark/name 160V to 270V, Power Factor more

than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Tube Light with integral/ non-integral driver .

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional

250 Supplying and erecting led lamps with following 50.00 Ea 112.11

wattage capacity of 220 to 240 voltage, minimum

15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting

suitable for E14 / E27 / B22 lamp holders, pf >=

0.5(A) LED Lamps integral type, with PC diffuser

suitable LAMP holder

(i) 5 to 8 watts Cat-III

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

251 Supplying and erecting LED indoor fittings with 168.00 Ea 427.23

LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in

aluminium casted body with company

160V to 270V,Power Factor more than 0.95, THD

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed

Mount Downlight with provision for spring loaded

mounting clips complete.IP20

(ii) 11-15 watts, Surge-2 KV Cat-III

252 Supplying and erecting LED indoor fittings with 185.00 Ea 1794.77

LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel

conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in

aluminium casted body with company

160V to 270V,Power Factor more than 0.95, THD

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage

capacity between the ranges shown.)

(B) LED Panel Light with provision for Plane front

frame with translucent cover fixed to housing

(vi) 36 watts, 24" x 24", Surge- 2KV cat III

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

253 Supplying and erecting LED street light / Flood 30.00 Ea 4997.48

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency

> 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection. (iii)(ii) above 48 to

254 Supplying and erecting LED street light / Flood 2.00 Ea 4819.72

light fittings with High power White LEDs wattage

of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency

> 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage

capacity between the ranges shown.)

(C) Post Top Lantern LED fitting comprises of

finish cast aluminum spigot and spun aluminum

canopy fixed with opal polycarbonate, pipe

arrangement for vertical mounting driver and

accessories wired upto terminal block.IP 65 (ii)32-

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

255 Providing and erecting Approved make Four pole 9.00 Ea 6173.12

moulded case circuit breaker having breaking

capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed

thermal & magnetic release suitable to work on

A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in

existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

256 Providing and erecting Approved make Four pole 11.00 Ea 8055.76

moulded case circuit breaker having breaking

capacity ICU of 35 KA. at 415 V. having normal

current rating 125A. with Fixed thermal &

magnetic release suitable to work on A.C.supply

50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing

G.M.S. housing.

ICS=100% of ICU only Cat III

257 Providing and erecting Approved make Four pole 3.00 Ea 20946.39

moulded case circuit breaker having breaking

capacity ICU of 35 KA. and above at 415 V .

having normal current rating 250A. with variable

thermal & magnetic release suitable to work on

A.C.supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in

existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

258 Providing and erecting Approved make Earth fault 5.00 Ea 4687.41

Relay suitable to mount with inter connection

suitable to following size of moulded case circuit

breaker having CT ratio & MCCB rating as

following along with shunt trip 220V AC. with all

internal connections & complete erected in

existing M.S.housing.

259 Providing and erecting Approved make Earth fault 3.00 Ea 4983.34

Relay suitable to mount with inter connection

suitable to following size of moulded case circuit

breaker having CT ratio & MCCB rating as

following along with shunt trip 220V AC. with all

internal connections & complete erected in

existing M.S.housing.

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

260 Providing and erecting following additional parts 23.00 Ea 873.65

for panel mounting MCCBs

(A)Extended operating rotary handle with pad

lock with three position trip,off,on suitable for

25A to 250 A panel mounting cat-III

261 Supplying and erecting triple pole & neutral 440V 12.00 Rn.Mtr 1961.42

/ 500V panel mounting Copper Busbars with four

equal Nos. of electrolyte bus having current

density not more than 1.6 Amp. / sq.mm (Rated

current / cross section area) duly wrapped with

colour insulating tape for phase sequence of

following current carrying capacity, erected with

necessary bus bar supports /insulators, main

cable socket to each bar, erected in existing

cubical panel with necessary connections.

(A) Suitable for 100 Amp. Capacity

262 Supplying and erecting triple pole & neutral 440V 15.00 Rn.Mtr 4909.61

/ 500V panel mounting Copper Busbars with four

equal Nos. of electrolyte bus having current

density not more than 1.6 Amp. / sq.mm (Rated

current / cross section area) duly wrapped with

colour insulating tape for phase sequence of

following current carrying capacity, erected with

necessary bus bar supports /insulators, main

cable socket to each bar, erected in existing

cubical panel with necessary connections.(C)

Suitable for 300 Amp. capacity

263 providing and erecting Miniature circuit breaker 610.00 Ea 112.11

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA

to be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat-III

264 Providing & erecting 240 V MCB double pole 1.00 Ea 278.76

switch for lighting Load (B Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in

existing box having following capacity

(B) 6 to 32 Amp. Cat-III

265 Providing & erecting 415V MCB Four Pole Switch 2.00 Ea 578.73

for Lighting Load (B curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box

having following capacity

(a) 6 to 32 Amp. Cat III

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

266 Providing & erecting 415 V MCB Four Pole for 72.00 Ea 737.30

Motor & Inductive Load (C Curve) having 10KA

breaking capacity & confirms to IS :8828 in

existing box having following capacity

(B.) for 63 Amp. Cat-III

267 Providing and erecting Sheet Steel powder coated 1.00 Ea 885.77

MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for

(A) single phase incoming and horizontal single

(b) sheet steel double door (IP-43)

268 Providing and erecting Sheet Steel powder coated 32.00 Ea 3412.79

MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for

(B) three phase incoming and single phase

horizontal type outgoing Per phase isolation type

(b) sheet steel double door

269 providing and erecting Approved make RCCBs 108.00 Ea 1969.50

conforming to IS: 12640 and having sensitivity of

30 mA and Short Circuit withstand capacity of

KA and suitable for operation on single phase

V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not

incorporate any electronic component. for

following Max. rating erected as directed

(i) 25 Amps.DP cat III

270 Providing and erecting Approved make RCCBs 2.00 Ea 4314.72

conforming to IS: 12640 and having sensitivity of

30 mA and Short Circuit withstand capacity of

KA and suitable for operation on 3 phase and

neutral 415V,50Hz. having characteristic of quick

action & tripping with all advance feature & do

not incorporate any electronic component for

following Max. rating erected as directed. with

necessay enclosure

(iv) 100 Amps. FP (100 mA Sensitivity) Cat-III

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

271 Providing and erecting required size Copper strip 40.00 Kg. 794.87

for earthing of H.T. OCB / ACB/ Transformer, LT

panel board, Motors etc. using copper clamp.

272 Providing and erecting Annealed bare Copper wire 40.00 Kg. 794.87

273 Supplying & erecting earth pit of minimum bore 11.00 Ea 4591.46

dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as

per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia

of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant

ohmic value surrounded by highly conductive

compound with high charge dissipation suitable

for following type of applications with chamber

and heavy duty cover. (A)(approved make OEM

has to submit test certificate including value of

earth resistance of installation duly stamped and

signed by agency and officer Incharge has to

ensure the value of earthing resistane mentioned

in test Certificate) & having back filling

compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 ohm / meter testing

as per IEC 62561-2017, Voltage drop:- < 1 volt at

no load & dry form, Sulphar content:- <2%(C)

Back fill Compound :- Earthing compound

should be capable to retain moisture for long time

Necessary test report must be submitted by

274 (a) For Electrical

Providing Installation

and erecting Castup iron

to 440V in plate

earth 4.00 Ea. 856.48

size 45 X 45 X 0.35 cms. buried in specially

prepared 2.5 Mtr. Deep earth Pit complete with

necessary G.I. strip in G.I. pipe 2 Mtr. long with

coupling and G.I. plug for earthing of switch gear,

conduit run or power plug etc.

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

275 Providing & erecting weather proof, dust & 14.00 Sq.Mtr 14902.55

vermin proof, floor mounted front operated indoor

type cubical panel board necessary IP-42 and

above protection as per approval from engineer

incharge made from 14 SWG thick CRC M.S.

sheet for outer body & doors, 16 SWG thick CRC

M.S.sheet for internal partitions with necessary

accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding,

riveting with internal partitions & cable alley as

per requirements & instruction of engineer-in-

charge with erection of

supplied switch gears, BUSBARS, suitable size of

inter connecting PVC copper wire / copper-

aluminium strips, rubber grommets, rib, bakelite

control fuses/MCB for measuring instruments,

earth bus & earth bolts, foundation flange - bolts-

base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber

gasket,heavy duty end terminal

connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel

shall be painted with epoxy powder coating.

(The rates excludes the cost of switchgears, bus

bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The

dimension shall be measured excluding base

beams) The panel shall be supplied with following

approved manufacturers with following size.

(B) The standard companies switch gear shall be

used and only manufacturers at CPRI approved

(i) with 350mm depth

276 Providing , erecting , fabricating the M.S. 300.00 Kg 77.77

structure as per requirement on site

incorporating proper size of M.S.

angles,square,round, flats, bars, channels,

sections complete with cutting, welding, grinding

& finishing duly painted with one coat of red

oxide with erection on site as per direction of

engineer in charge with necessary grouting,

cementing, plastering & finishing complete.

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

277 Providing and erecting multifunctional meter 8.00 Ea 14123.84

suitable for application of Power monitoring and

showing measurement of following Voltage,

Frequency, Apparent energy, Apparent power,

Active and reactive energy, Active and reactive

power, Average voltage Vavg, Peak demand power

PM, QM, SM, Demand power P, Q, S, Apparent

power S, S1, S2, S3, Unbalance current, Power

factor and displacement PF (signed, four

quadrant), Calculated neutral current, Active,

reactive, apparent energy (signed, four quadrant),

Active power P, P1, P2, P3, Voltage U21, U32,

U13, V1, V2, V3, Phase currents, Average current

Iag, Peak demand currents, Reactive power Q,

Q1, Q2, Q3, Demand current I1, I2, I3, [Us] rated

supply voltage 40...300 V AC 45...65 Hz, 40...300

V DC, Network frequency 50 Hz, Type of network

3P, Display type 7 segments LED, Display colour

Red, Messages display capacity 3 fields of

characters, Display digits 12 digit(s) - 14.2 mm in

278 Providing and erecting FRLSH XLPE(IS:7098)(I)- 130.00 Mtr. 378.75

88 ISI armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables with necessary lugs and

(D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2

279 Providing and erecting FRLSH XLPE(IS:7098)(I)- 400.00 Mtr. 540.35

88 ISI armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables with necessary lugs and

(F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2

280 Providing and erecting FRLSH XLPE(IS:7098)(I)- 450.00 Mtr. 731.24

88 ISI armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables with necessary lugs and

(G) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

281 Providing and erecting FRLSH XLPE (IS:7098)(I)- 550.00 Mtr. 126.25

88 ISI armoured cable multistrand / Solid

Aluminium conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing trench

/ pipe of following size of cables with necessary

lugs and glands.

(B) 4 core 6 Sq. mm

282 Providing and erecting FRLSH XLPE(IS:7098)(I)- 120.00 Mtr. 209.07

88 ISI armoured cable multistrand Copper

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables with necessary lugs and

(B) 2 core 4 Sq. mm

283 Providing and erecting FRLSH XLPE(IS:7098)(I)- 120.00 Mtr. 676.70

88 ISI armoured cable multistrand Copper

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at

road crossing or floor of following size of cables.

(A) 4 core 10 Sq. mm

284 Making trench in soft soil of suitable width of 90 1050.00 Mtr. 55.55

cm deep for laying cable or locating the fault all

over the run and back filling the same and

making the surface as normal ground.

285 Making trench in Hard Murrum / Tar Road of 100.00 Mtr. 74.74

suitable width of 90 cm or required depth for

laying any size of cable or locating the fault all

over the run and back filling the same and

making the surface as normal ground.

286 Providing & laying. R.C.C. Hume pipe for cable to 100.00 Mtr. 456.52

be laid 90 cm. below ground across the road

crossing or on floor with necessary material in an

approved manner and making the ground as per

(A ) 450 mm dia

287 Providing & laying approved make Double walled 500.00 Mtr. 62.62

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same

material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable

(A) 50 mm Outer Dia

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

288 Providing & laying approved make Double walled 300.00 Mtr. 95.95

corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same

material at required depth in existing trench for

laying of cable. below ground / road surface for

enclosing cable

(C))90 mm outer dia

289 Supply, Installation, Testing and Commissioning 905.00 Ea 2629.03

of suitable sweep, BEE 5 Star rated, Ceiling fan

with Brush Less Direct Current (BLDC)

permanent ferrite magnet Motor, class of

insulation: B, Rust free 3 nos.Aluminium blades,

2 nos. canopies, shackle kit with earthing

provision, copper winding, Power factor not <

0.9, Service Value (CMM/W) minimum 6.85, Air

delivery minimum 215 CMM, 350 RPM,230v

(tolerance as per IS : 374-2019), THD < 10%,

compitible with electronic regulator unit for Speed

Control and all remaining accessories including

safety pin, nut bolts, washers, temperature rise =

75 degree C (Max.), suitable for 140 to

Voltage and rectifier circuit with surge, over

current and overload protection , 50 Hz, Single

phase AC Supply, earthing etc. Complete as

required.[ Make shall be approved by Engineer in

Charge] (A) 1200 mm Sweep (48")

290 Supplying and erecting 19 / 20 mm. nominal 905.00 Mtr. 108.07

bore Medium Class M.S. Pipe down rod erected

duly painted for fan complete with proper

insulation without leckage and earthing.

291 Supplying & erecting Fan Hook of 10 mm M.S. 905.00 Ea. 43.43

Round bar grouted in RCC slab with Making the

site as original.

292 Supplying & erecting fan hook box of 10 mm 905.00 Ea 108.07

M.S. round bar bounded to the RCC bars up to

50mm length each side and pierced through a

Gauge M.S. box / Heavy Duty PVC box complete

erected concealed in Ceiling with necessary

293 Providing 2.5mm.thick laminated acrylic sheet to 905.00 Ea 18.18

cover the fan hook or Fan box.

Item Description of Item (with brief specification Rate in Total

No. and reference to book of specifications) Figures Amount

294 Supplying & erecting approved make low noise 50.00 Ea 1366.53

decorative exhaust fan having square frame ABS

body with inbuilt lowers & square frame

250mm with 1350 RPM Cat.II

295 Supplying & erecting single phase approved make 14.00 Ea 3082.52