SPECIAL REPAIR OF STAFF QUARTERS OF REGIONAL OFFICE AT BRD CAMPUS AF STN CHANDIGARH UNDER GE (AF) MC CHANDIGARH

Amount

Dismantling brick tiles or terracing tiles, single layer on roof and removal of unserviceable brick tiles / brick bats and rubbish outside defence land, complete all as specified and directed.

Taking down existing bitumen felt including cement mortar bedding including padding and cleaning the surface and removal outside the MoD land, complete all as specified and directed.

Taking down cement plaster on brick or stone walls or concrete surfaces, etc, any description including raking out joints, hacking for key, scrubbing down with water, etc and removal of rubbish outside MoD land, complete all as specified and directed.

Taking up or down 15/20mm bore steel tubing with all standard fittings or connections, from wall/ceiling/floor etc., including removal from site for re-use or for credit, complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame), exceeding 1.5 sqm but not exceeding 4 sqm each and removal, including making good the disturbed surface in CM(1:4) and finishing as per existing specifications and removal of debris outside MOD land, complete all as specified and directed.

Demolition of brick masonry work built in cement mortar including all quoins, arches, pillars, or in any position (after staging) etc. and removal of rubbish outside MOD land and stacking of useful bricks/brickbats for credit, complete all as specified and directed

M & L for PCC 1:2:4 type B-0 (12.5 mm graded stone agg ) as in padding on roof laid in 50mm thick average required thickness to maintain desired slope, finished even and fair without using extra cement, complete all as specified and directed.

Material and labour for cement concrete (1:2:4) type B-0 using 12.50 mm graded crushed stone aggregate, as in roof kerb, mud stops, benching , including use and waste necessary form work, complete all as specified and directed.

Material and labour for rendering 10mm thick in cement mortar (1:3) using WPC @ 0.200ML per 50Kg bag of cement on surfaces of roof and parapet, finished even & fair without using extra cement, complete all as specified and directed. Note:- WPC shall be measured and paid separately.

Supply only Liquid water proofing compound, complete all as specified and directed.

Material and labour for applying a coat of bitumen primer @ 0.3Kg /sqm conforming to IS : 3384 and laying 3mm thick APP modified water proofing membrane reinforced with non woven polyster matt having softening point not less than 150 degree centigrade, having tensile strength 650 N/Sqcm in longitudinal & 400 N/Sqcm in transverse direction by torch method with min 100 mm side lap and 150 mm end lap followed by application of a coat of hot blown bitumen 85/25 grade @ 1.2 kg per sqm and blinded with clean dry sand @ 0.5Kg/sqm over the APP membrane on roof, complete all as specified and as directed. Make : IWL India Ltd/ Pidilite Industries/ STP Ltd/ Sika. NOTE: The water proofing treatment shall be carried out by the Authorised applicator of the Manufacturers.

All as per item No. 11 above but on vertical surfaces, complete all as specified and directed.

Material and Labour for 40mm thick brick tiles laid over and including 15mm thick cement screed bed in CM (1:6) using grey cement and grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement laid on concrete roof, complete all specified and directed.

M&L for 15mm thick Rendering on brick ,concrete or dubbed surfaces in cement mortar 1:4 finishing even and smooth without using extra cement at any height including necessary scaffolding, ladder & formork , complete all as specified & directed.

M&L for preparation of new plastered surfaces of walls/column/beam/chajja etc by wire brushes & stopping of surfaces & leveling/edging the disturbed surface usinga thin layer of putty to obtain smooth regular/even finish using sand paper and applying two coats of exterior acrylic emulsion paint over and including one coat of primer complete all as specified and directed.

Material and labour for brick work with fly ash bricks, straight or curved on plan exceeding 6m mean radius, built in CM (1:4), complete all as specified and directed.

Supply and fix, Steel water tubes, 15mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls (surface/ concealed), ceiling or laid in floors, complete all as specified and directed. Note: Cutting chases and making good shall be included in quoted rate. Make:- Jindal/Tata/Surya

Supply and fix, Steel water tubes, 20mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls (surface/ concealed), ceiling or laid in floors, complete all as specified and directed. Note: Cutting chases and making good shall be included in quoted rate. Make:- Jindal/Tata/Surya

Supply and fixing/hoisting in repair, rotational moulded polyethylene (HDPE) water storage tanks (cylindrical vertical with closed top), triple layer with screwable lid, 1000 litre capacity, hoisted and fixed in position including inlet, outlet and drain pipe with plug, complete all as specified and directed. Make: Sintex/ SFMC/ Polycon/ Diplast.

Supply and fix in repair, ball valves high pressure of PTMT (Minimum weight 142gms) with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe 15mm dia bore, complete all as specified and directed.

M&L for 15mm thick Rendering on brick ,concrete or dubbed surfaces in cement mortar 1:6 finishing even and smooth without using extra cement at any height including necessary scaffolding, ladder & formork , complete all as specified and as directed.

M & L for preparing new plastered surfaces of walls and applying two coats of Oil Bond distemper at any height including necessary scaffolding & ladder etc complete all as specified and as directed. Make: Snowcem Bombay/ Silvocem/ Durocem/ Super Snowcem/ Aquacem/ Decocem.

Demolition of cement concrete (unreinforced), of any description in ground floor and paving (below or above ground level), not exceeding 15cm thickness, including removal of rubbish outside MoD land, complete all as specified and directed.

Material and labour for filling broken brick bats of size 40mm to 63mm as in sunken portion including grouting in CM 1:6, complete all as specified and directed.

M&L for providing water proofing treatment of sunken portion of WCs, bathroom etc. by applying cement slurry mixed with Acrylic based polymer modified cementations composite compound coating of make as approval in Technical Instruction 5/2003 by adding: (a) First layer of slurry of cement @.488 kg/sqm mixed with Acrylic based polymer modified cementations composite compound @ .253 kg/sqm. This layer will be allowed to air cure for 4 hrs. (b) Second layer of slurry of cement @.242 kg/sqm mixed with Acrylic based polymer modified cementations composite compound @ .126 kg/sqm. This layer will be allowed to air cure for 4 hrs followed with water curing for 48 hrs. complete all as specified and directed. (c) The rate include aeration of surface treatment and sealing of all joints, corners, junctions of pipe and masonry within polymer mixed slurry. (d) This statement shall be provided after provision of cement plaster mixed with WPC and synthetic fibres while concrete is still green (Rate for WPC and synthetic fibre included in this item). (e) 200 micron thick polythene film pasted with the help of adhesive shall be provided over above treatment.

M & L for 25 mm thick cement concrete (1:2:4) type B-0 using 12.5 mm graded stone aggregates as in flooring laid in slope complete all as specified and directed.

M & L for 40 mm thick cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregates as in flooring laid in slope complete all as specified and directed.

Supply and fix in repair, 160 mm bore PVC (SWR) pipes, single socketed, in any length, with rubber ring joints (except standard fitting) fixed to wall, complete all as specified and directed. Make:- Supreme/Diplast/Kisan/Prince

Supply and fix in repair 160mm bore PVC (SWR) bends any radius with access door, fixed to pipes with adhesive/solvent cement, complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and directed.

M&L for First Quality, Glazed ceramic coloured tiles 300mm x 200mm x 6mm to 7mm thick,in patches maximum 2 Sqm each in skirting, dados, risers to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles complete over and including rendering 10 mm thick in cement mortar 1:4 on brick walls for laying tiles complete all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including screed bed or bedding layer of mortar 15mm thick in cement mortar 1: 6 for laying floor finishes complete all as specified and directed.

Supply and fix in repair, Cast iron (sand cast) soil, waste and vent pipes, 100mm bore, in any length with or without ears, with cement joints 1:3 , laid in trenches or under floors or on wall as required, complete all as specified and directed.

Supply and fix in repair, cast iron bend (any radius), diminishing pieces or tapers suitable for 100mm bore pipes, ISI marked, with cement joints, complete all as specified and directed.

Material and labour for Cast iron floor trap 75mm outlet , with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), , complete all as specified and directed.

Supply and fix in repair Grating round 140 mm size of PTMT (Minimum weight 50gms), complete all as specified and directed.

Supply and fix in repair Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays including bolts & nuts and securing ends of stay to wall for 100mm bore CI pipes, complete all as specified and directed.

Supply and fix in repair cast iron cowls 75mm bore, complete all as specified and directed.

Supply and fixing in repair, Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for 20mm bore dia, complete all as specified and directed. Make:- Seiko/Parko/Gem/Zoloto/Anchor

Supply and fixing in repair, stop valves , cast copper alloy, screwed down high pressure, fancy type, chromium plated, screwed both ends for iron pipe or for unions 15mm bore dia, complete all as specified and directed. Make:- Seiko/Parko/Gem/Zoloto/Anchor

Supply and fixing in repair, chromium plated brass angle valve, screwed both ends for iron pipe or for unions 15mm bore dia, complete all as specified and directed. Make:- Seiko/Parko/Gem/Zoloto/Anchor

Supply and fix in repair, Bib tap, cast copper alloy, chromium plated, long shank screwed down high pressure, with any type of handle, screwed for 15mm dia bore iron pipe or for brass ferrule, complete all as specified and directed. Make:- Seiko/Parko/Gem/Zoloto/Anchor

Supply and fix in repair, chromium plated central hole basin mixer 15mm bore with copper pipe, complete all as specified and directed. Make:- Jaquar/Marc/ESSCO

Supply and fix in repair, over head shower 15mm bore single flow self cleaning type with arm, complete all as specified and directed. Make:- Jaquar/Marc/ESSCO

Supply and fix in repair health faucet chromium plated with hook stand complete all as specified and directed. Make:- Jaquar/Marc/ESSCO

Supply and fix in repair chromium plated toilet paper holder including all fittings and fixtures, complete all as specified and directed. Make:- Jaquar/Marc/ESSCO

Supply and fix in repair PVC bathroom cabinet mirror 600x450mm including all necessary arrangements, complete all as specified and directed. Make:- Shakti cat part No. B3510146 or equivalent in prayag/commander

Supply and fix in repair vitreous china one piece EWC standard size white/ivory colour with dual flushing cistern white including P & S trap, complete all as specified and directed. Make:- Jaquar cat part No. B1520108 or equivalent in Parryware/Cera

Supply and fix in repair Tubular towel rail of brass chromium plated, 20mm dia, D type, 60 cm long between flanges, fixed complete all as specified and directed.

Supply and fix in repair, PVC connections of PTMT, non corrosive, with nuts & washers on both ends, 450mm long suitable for 15mm dia bore pipe, ISI marked, complete all as specified and directed.

Supply and fix in repair, PVC connections of PTMT, non corrosive, with nuts & washers on both ends, 600mm long suitable for 15mm dia bore pipe, ISI marked, complete all as specified and directed.

Supply and fix in repair,vitreous china wash basin, white, flat back of size 550x400mm excluding taps, waste chain and plug, PVC waste pipe and procelain stopper but including bracket of any size, including cutting and pinning for ends of brackets or erecting stand, complete all as specified and directed. Make:- Parryware/Cera/Neycer/Somany

Supply and fix in repair, Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

Supply and fix in repair, 15mm bore wall mixer telephonic type chromium plated with CP flange, complete all as specified and directed. Make:- Marc/Jaquar/Sona

Supply and fix in repair, PVC waste pipe, flexible 32 mm bore, suitable length for WHB sink, complete all as specified and directed.

Supply and fix, Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. Square tube, as per specification & drawing in SSR Part-II, fixed in position in the opening, complete all as specified and directed.

Supply and fixing, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet 5mm thick to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification & drawing in SSR Part-II, complete all as specified and directed.

Supply and fix, butt hinges, 100mm long, medium weight, cold rolled mild steel, bright finished, complete all as specified and directed.

Supply and Fixing, Aluminium anodised, barrel tower bolts 150mm long, powder coated, of extruded section and fixed, complete all as specified and directed.

Material and labour for preparation of old plastered surfaces of walls and applying two coat of oil bound distemper, white or tinted at any height including necessary scaffolding etc, complete all as specified and as directed.

Material and labour for preparation of old plastered surfaces of ceiling and applying one coat of oil bound distemper, white or tinted at any height including necessary scaffolding etc, complete all as specified and as directed.

Material and labour for preparation of old steel or iron surfaces over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of old wood or wood based surfaces over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

Material and labour for cup boards steel shutter having 1.0mm thick MS plain black sheet with locking arrangements with MS chromium plated handle mechanism and shutter fixed with purpose made hinges and pressed steel frame having profile size of 85mmx60mmx1.25mm thick fixed in wall, each shutter is strength with 1.0mm thick sheet, beam pressed in C shape having girth of 150mm with built in 5mm thick mirror of size 400mmx1200mm in one shutter of each cup board, 1 No stainless steel drapery rod of 20mm dia with brackets, 1 No stainless steel peg set of 03 including powder coating to complete cup board frame and shutter (inner & outer) including 50mm long 4 lever brass mortice lock with 2 keys of make:- Harrison/Godrej/Link, complete all as specified and directed. Note:- Rate for tarring back of pressed steel frame and filling with PCC 1:3:6 type C-0 deemed to be included in the quoted rate of this item.

Material and labour for applying two coats of synthetic enamel paint over steel and iron surfaces of any description, over 10 cm in width or girth including preparation of new or previously treated surface over a coat of red oxide primer complete all as specified and directed.

Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames glazed with putty or fixed with wooden beads/metal pins complete all as specified and directed.

Supply and fixing plain sheet glass 3mm thick, ordinary quality, not exceeding 0.50Sqm in each pane, and glazing with oil putty and securing pins, spring clips etc, complete all as specified and directed.

Note:- Amount of credit of Rs. 30686.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender.

M/s Bhagwati Enterprises

Azurite Engineering

M/s Matloob Ahmed

shree balaji builders