FDR to Biswaspara Purba Barahaldi Karnajoypara Kastaraipara Radhamadabpur Laxmipur F I Shibnagar F I Shibnagar F II Jayantipur and Laljuri L I Schemes under Dasda and Laljuri R D Block under Water Resource Sub Division Kanchanpur North Tri

Dismantaling of pump for over hauling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs. in two spell complete as per direction of the Engineer-in-Charge. For LI

Providing & fitting fixing C.I coupling complete with nuts & bolts of approved quality. a) 150 mm φ

Providing & fitting fixing coupling nuts & bolts (all Size)of approved quality.For LI

Providing & fitting fixing coupling rubber bush (All Size)of approved quality.For LI

Providing & fitting fixing coupling star bush (All Size) of approved quality.150 mm dia

Providing & fitting fixing Pump Shaft of approved quality.

Providing & fitting fixing Shaft sleeve of approved quality. a) Cast iron (CI)

Providing & fitting fixing Shaft sleeve nut of approved quality.a) Cast Iron (CI)

Providing & fitting fixing Casing ring of approved quality. 150 mm dia 8 mm thick

Providing & fitting fixing C.I. gland of approved quality. For LI

Providing & fitting fixing nuts & bolts bull threaded 10 mm dia and 100 mm long(stag nut) for gland of approved quality. For LI

Providing & fitting fixing Lantern Ring for pump of approved quality.

Repairing of pump shaft by welding, polishing etc. complete as per direction of the Engineer-in-charge.

Providing & fitting fixing C.I. Impeller of approved quality for Horizontal pump.

Supplying & fitting fixing manually operated oil immerged starter of approved quality. a) 30 Hp Osco/BCH Make

Supply & fitting fixing ball bearing of approved quality for pump required during overhauling. a) 6305 Ball bearing (TATA /SKF)

b) 6306 Ball bearing (TATA /SKF)

Supply & fitting fixing ball bearing of approved quality (TATA/SKF MAKE) for motor. b) 6309 Ball bearing (TATA /SKF)

c) 6310 Ball bearing (TATA /SKF)

Supplying & fitting fixing of GI . bend of approved quality. a) 125 mm dia

b) 150 mm dia

Supplying & fitting fixing of spare parts for 20/25 HP Horizontal motor. Motor fan

Terminal plate

Supplying and fitting fixing AC Voltmeter (Moving Iron) on the panel board of approved quality. SMI 144,Range 0-400 to 0-500

Supplying and fitting fixing AC Ammeter (Moving Iron) on the panel board of approved quality. SMI 144,Range 0-10A

Providing & fitting fixing M.S flange (10 mm thick) at site of work of approved quality. a) 150 mm dia

b) 125 mm dia

Providing & fitting fixing Rubber flange washer 6 mm thick at site of work of approved quality. a) 150 mm dia

b) 125 mm dia

Providing & fitting fixing MS hose clamp with nuts & bolts etc. complete at site of work of approved quality. a) 150 mm dia

Providing & fitting fixing PVC suction hose pipe overall thickness 5mm of best quality at site of work (Pankaj made) of approved quality. a) 150 mm dia

Provinding & fitting fixing C.I. non- return valve of approved quality as per CPWD specification and direction of the Engineer-in-charge. A) 150 mm nominal bore.

Providing & fitting fixing C.I tail piece of approved quality at site of work. a) 150 mm dia

Providing & fitting fixing foot valve leather washer 16 mm thick of heavy duty at site of work of approved quality. a) 150 mm dia

Providing & fitting fixing C.I foot valve spare parts of 125/ 150 mm dia at site of work of approved quality. a) C.I foot valve weight

Providing & fitting fixing C.I foot valve spare parts of 125/150 mm dia at site of work of approved quality. b) C.I foot valve ring

Providing & fitting fixing C.I foot valve net 150mm dia at site of work of approved quality.

Dismantalling of motor for varnishing, heating etc. complete in/c reinstallation and making necessary electrical connection with main switch/ starter with motor including trial run for 10 hrs in two spell complete as per direction of Engineer-in-charge.

Providing & fixing of GI pipe of Heavy class as per Is: 1239 with latest amedment complete with G.I fittings including trenches and refilling, cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer-in-charge. A) 40 mm dia. nominal bore (for primimg line).

B) 50 mm dia. Nominal bore (for primimg line)

Supplying & fitting fixing of Terminal plate for 20/25 HP horizontal motor.

Providing and fixing G.I. Full way valve as per CPWD specification and direction of the Engineer - in - charge. 40 mm dia

Providing and fixing of Brass Union Joints (Medium class) with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in -charge. 40 mm dia

Providing and fixing G.I. socket as per CPWD specification and direction of the Engineer - in - charge. 40 mm dia

Providing & fitting fixing Rubber flange washer 6 mm thick at site of work of approved quality. a) 125 mm dia

Providing and fitting fixing of M.S shore manifold made with 3mm thick MS sheet of size one way 315 mm dia & three way 125 mm dia made with suitable flange(all end) including coating with sheet primer (tailpiece if required will be paid separately ) including proper alignment with pipe line & earth cutting ,backfilling complete as per direction of Engineer-in-charge.

Providing & fixing 200 Amps busbar of size 600X 450X100 mm with 4 nos. copper strip of size 450X40X4 mm of approved quality.

Supplying & fitting fixing of 7/16 Copper Wire with all electrical equipments including trial run etc. complete (ISI Marked) on the pannel board of approved quality.

Providing & fitting fixing Steel sheet enclosed switch Fuse unit ( Suitable for DIN fuse) triple pole with Neutral Link (TPN) , 415/500 Volt, complete as per direction of Engineer-in Charge. A) Current range 63 Amps.

B) Current range 200 Amps.

Providing & fitting fixing of foot valve washer 200 mm dia of best quality as per direction of Engineer-in charge.

Supplying & fitting fixing of 63 Amps kit cut for main & sub-main switch (Male & female)

Supplying & fitting fixing of 200 Amps kit cut for main & sub-main switch (Male & female)

Providing & fixing C.I. sluice valve (with CAP) complete with bolts, nuts, rubber indertions etc. (the tail piece if required will be paid separetely) as per CPWD specification and direction of the Engineer-in-charge. a)125mm dia PN-1.

Supplying and greasing/applying of grease in wheel bearing complete as per direction of Engineer-in-charge.

Supplying and fitting fixing of asbestos rope of best quality as per direciton of Engineer-in-charge. 10 to 12 mm thick

Hiring charge of welding set of single phase with operating staff and carrying upto the site of work including loading and unloading (both way) complete as per direction of Engineer-in-charge.

Providing and fixing G.I. pipes of Heavy class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in -charge. A. External work. i) 125 mm dia. nominal bore

ii) 150 mm dia. nominal bore