S.R. to SP Office Porbandar and SR to B-20 (Block B1 & B2) & C01 Units at Madhavpur, Dist. Porbandar. [Including Electrification Work]

Name of Work : S.R. to SP Office Porbandar and SR to B-20 (Block B1 & B2) & C01 Units

at Madhavpur, Dist. Porbandar. [Including Electrification Work]

:: SCHEDULE B ::

Statement showing the approximate quantities for the items of the above work to be carried out and

approximate cost put to tender for Rs.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

1 Removing & Scraping of old deteriorated plaster of any 2077.00 Sqm 20.63 Rupees Twenty And Paise

thickness from wall/R.C.C. member including stacking of Sixty Three Only

serviceable material and disposal of unserviceable from site

of work with all.

2 Dismantling tile or stone floors laid in mortar including 294.00 Sqm 50.94 Rupees Fifty And Paise

stacking of serviceable materials and disposal of Ninety Four Only

unserviceable materials with all lead and lift.

3 Dismantling sanitary fittings like wash basin,w/c pan indian 54.00 No 429.66 Rupees Four Hundred

and European type, flusing tank etc including stacking of Twenty Nine And Paise

serviceable materials with all lead and lift. Sixty Six Only

4 Demolition and disposal of unserviceable materials with all 11.00 Cum 646.23 Rupees Six Hundred Forty

lead and lift.(ii) Cement concrete. Six And Paise Twenty

5 Demolition and disposal of unserviceable materials with all 38.00 Cum 1122.66 Three

RupeesOnlyOne Thousand

lead and lift.(ii) Reinforcement Cement concrete. One Hundred Twenty Two

6 Dismantling of PVC/U PVC Pipe for any dia... with all lead 728.00 Rmt 5.00 And Paise

Five OnlySix Only

7 Dismantling of MS / Galvanised iron Pipe for any dia... with 183.00 Rmt 10.00 Rupees Ten Only

all lead and lift.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

8 Cleaning the Sluge of Old Septic Tank Size of Septic 5.00 x 2.00 Each 15000.00 Rupees Fifteen Thousand

2.15 or above Only

9 Cleaning the Sluge of Old Septic Tank Size of Septic Below 3.00 Each 12000.00 Rupees Twelve Thousand

5.00 x 2.15 Only

10 Brick work using common burnt clay building bricks having 5.50 Cum 4302.59 Rupees Four Thousand

crushing strength not less than 35 Kg/Sq.cm.in Foundation Three Hundred Two And

and Plinth in cement mortar 1:6 (1-cement;6-coarse sand), Paise Fifty Nine Only

Conventional bricks.Bricks with frog only shall be used.

11 Providing and Laying TMT bar Fe 500 reinforcement of 60.00 Kg 76.52 Rupees Seventy Six And

approved brand by GSPHC only for RCC work including Paise Fifty Two Only

cutting, bending, binding and placing in position etc.

comp.for all floors.

12 Providing and laying Ordinary cement concrete 1:1.5:3 (1: 0.75 Cum 5092.94 Rupees Five Thousand

Cement; 1.5 : Coarse Sand; 3: 20mm Nominal size Stone Ninety Two And Paise

agregate) and finishing smooth with curing etc complete Ninety Four Only

including cost of form work but excluding cost of

reinforcement for RCC work in Coping etc. Complete.

13 Providing and applying bonding agent for grip between old & 54.00 Sqm 371.39 Rupees Three Hundred

new concrete by Sikadur 32 or its equivalent as approved by Seventy One And Paise

engineer in charge. Rates are inclusive of surface Thirty Nine Only

preparation such as cleaning surfaces. Mixing components

of Sikadur 32 together with a slow-speed electric drill with

properly designed impeller until a smooth consistency is

achieved. Mix shall be applied by brush, roller or spray.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

14 Providing and applying Micro concrete in existing RCC 2.50 Cum 62188.93 Rupees Sixty Two

members. micro concrete shall be of Perma recrete - 306 or Thousand One Hundred

its equivalent from ROFF, FOSROCK, BASF or SIKKA as Eighty Eight And Paise

approved by engineer in charge (Of 60 MPA at 28 days). Ninety Three Only

Rates are inclusive of cleaning the surface, remove loose

materials, applying Sikka Rust off 100 or its euivalent to

existing reinforcement. Preparing microconcrete as per

instruction of manufacturer required form work and

scaffolding and filling microconcrete in required places etc

15 Providing and Applying crack filling between masonary and 112.00 Rmt 8.12 Rupees Eight And Paise

RCC Joints by Sika Grout -214 etc Complete. Twelve Only

16 Brick work using common burnt clay building bricks having 12.75 Cum 4594.81 Rupees Four Thousand

crushing strength not less than 35 Kg/Sq.cm.in Ground Five Hundred Ninety Four

Floor in cement mortar 1:6 (1-cement;6-coarse sand), And Paise Eighty One Only

Conventional bricks.Bricks with frog only shall be used.

17 Brick work using common burnt clay building bricks having 21.25 Cum 4637.81 Rupees Four Thousand

crushing strength not less than 35 Kg/Sq.cm.in First Floor Six Hundred Thirty Seven

in cement mortar 1:6 (1-cement;6-coarse sand), And Paise Eighty One Only

Conventional bricks.Bricks with frog only shall be used.

18 Brick work using common burnt clay building bricks having 21.25 Cum 4680.81 Rupees Four Thousand

crushing strength not less than 35 Kg/Sq.cm.in Second Six Hundred Eighty And

Floor in cement mortar 1:6 (1-cement;6-coarse sand), Paise Eighty One Only

Conventional bricks.Bricks with frog only shall be used.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

19 Providing and laying cement concrete flooring 1:2:4 (1- 31.00 Sqm 351.70 Rupees Three Hundred

cement : 2-coarse sand : 4-graded stone aggregate 20mm Fifty One And Paise

nominal size) laid in one layer and finished with a floating Seventy Only

coat of neat cement. [B] 50mm thick.

20 Major Reparing of Door, Windows shutters and frame 228.00 Sqm 321.78 Rupees Three Hundred

including refixing aligning shutters providing replacing and Twenty One And Paise

fixing alluminium anodized fitting and fixtures etc. complete Seventy Eight Only

excluding the painting as per the specification including

cutting of panel or member of rails.

21 Providing & fixing Bajari glass ordinary quality bedded with 15.00 Sqm 1235.07 Rupees One Thousand

Beading patty with oil paint after Removing old Beading Two Hundred Thirty Five

patty and cleaning surface and necessary cutting of Bajari And Paise Seven Only

glass (B) 4mm thick Bajri glass

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

22 Providing, Supplying and Fixing of 32mm (Total) Thick 29.00 Sqm 8411.60 Rupees Eight Thousand

Double Flush Door Shutter with 1mm Thick Laminates on Four Hundred Eleven And

Both Side of Shutter. Making / Construction of Flush Door is Paise Sixty Only

with Pine or southern Yellow Pine Filler and 2.5mm core

veneer Both Side and 0.4mm Face Veneer on Both Side

with Lock rail on Center. Flush Door Provide with Teak wood

beading patti (32mm X 12mm) on Peripheries of Flush Door

with Door Frame of Non Teak Solid Wood of size 100mm

x 60mm with Chemically Treated and Seasoned Including

Paint Matching with Laminates. Frame & Flush door shutter

having 5 year warranty against attack of biological agent like

termite, borers, decay, fungi and harmful insects also

warranty against seasoning related issues like crack,

bending, twisting, warping. Laminates on shutter shall be

press by cold press method. Shutter shall be brought to site

in packed PVC bags & pvc coating shall be removed on

completion of work in such a way that shutter & Frame is

free from nail mark & any damages etc.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

Rates are also Inclusive of all Labors & Proviging 15cm.

Long 8 No of Hold Fast (25mm X 5mm) & 8 No of 6 Inch

S.S. but Hinges, 100mm x 75 mm x 3mm thick, required

Screw & Nails per Frame and Fixing following S.S. Fixtures

And Fastening. (1) Aldrops 2 No, 250mm x 16mm, (2) Door

Stopper 2 No, 100mm Long, (3) Double Leg Heavy Push

Door Stopper 2 No & (4) Handle 4 No, 150mm Long X

10mm thick. Door are Fixing as per Details Drawing &

Instruction of Engineer in charge. All Materials Used Shall be

as Per approved Material Make List of G.S.P.H.C. The

Required Frame is to be Obtained from Vanil Udhyog Maked

23 Provinding and fixing chicken wire mesh Jali 0.18 mm and 3.00 Sqm 64.06 Rupees Sixty Four And

0.18mt wide with necessar Paise Six Only

24 Providing 10 mm thick cement PLASTER in single coat on 99.00 Sqm 220.04 Rupees Two Hundred

ceilings for interior plastering and finished even & smooth in Twenty And Paise Four

C.M. 1: 3 ( 1 cement : 33 sand ) including finishing with a Only

floating coat of neat cement slurry at Ground Floor.

25 Provinding 15 mm thick cement PLASTER in single coat on 345.00 Sqm 219.70 Rupees Two Hundred

brick or concrete wall for interior plastering and finished even Nineteen And Paise

and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including Seventy Only

finishing with floating coat of neat cement slurry at Ground

26 Providing 10 mm thick cement PLASTER in single coat on 87.00 Sqm 247.76 Rupees Two Hundred

ceilings for interior plastering and finished even & smooth in Forty Seven And Paise

C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a Seventy Six Only

floating coat of neat cement slurry at First Floor.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

27 Provinding 15 mm thick cement PLASTER in single coat on 318.00 Sqm 249.50 Rupees Two Hundred

brick or concrete wall for interior plastering and finished even Forty Nine And Paise Fifty

and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including Only

finishing with floating coat of neat cement slurry at First

28 Providing 10 mm thick cement PLASTER in single coat on 53.00 Sqm 275.48 Rupees Two Hundred

ceilings for interior plastering and finished even & smooth in Seventy Five And Paise

C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a Forty Eight Only

floating coat of neat cement slurry at Second Floor.

29 Provinding 15 mm thick cement PLASTER in single coat on 236.00 Sqm 279.30 Rupees Two Hundred

brick or concrete wall for interior plastering and finished even Seventy Nine And Paise

and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including Thirty Only

finishing with floating coat of neat cement slurry at Second

30 Providing 10 mm thick cement PLASTER in single coat on 3.00 Sqm 303.20 Rupees Three Hundred

ceilings for interior plastering and finished even & smooth in Three And Paise Twenty

C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a Only

floating coat of neat cement slurry at Third Floor.

31 Provinding 15 mm thick cement PLASTER in single coat on 5.00 Sqm 309.10 Rupees Three Hundred

brick or concrete wall for interior plastering and finished even Nine And Paise Ten Only

and smooth in C.M. 1:4 ( 1 cement : 4 sand ) including

finishing with floating coat of neat cement slurry at Third

32 Provinding 20 mm thick SAND FACED cement PLASTER on 985.00 Sqm 327.45 Rupees Three Hundred

walls above ground level consisting 12 mm thick backing Twenty Seven And Paise

coat of C.M. 1: 3 ( 1 cement : 3 sand ) and 8mm thock Forty Five Only

finishing coat of C.M. 1:1 ( 1 cement : 1 sand ) etc.

Complete for any height.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

33 Provinding 10 mm thick cement PLASTER in single coat 209.00 Sqm 245.53 Rupees Two Hundred

of interior plastering and finished even and smooth in Forty Five And Paise Fifty

cement mortar 1:3 ( 1 cement : 3 sand ) and finishing with Three Only

floating coat of neat cement slurry including providing and

mixing Water Proofing material in C.M in proportion

recomended by the manufacturer including finishing with a

flaoting coat of neat cement slurry For All Floor.

34 Provinding Cement Vata (10cm x 10cm) size quarter round 288.00 Rmt 24.04 Rupees Twenty Four And

in cement mortar (1 : 1) including neat cement finishing, Paise Four Only

watering etc. Complete.

35 Providing and laying acrylic base ( zycosil) equvivalant 209.00 Sqm 110.70 Rupees One Hundred Ten

water proofing paint in two coats to vertical and horizontal And Paise Seventy Only

surface of depressed portion of bath and W.C. as directed

by engineer -in- charge. This treatement shall be carried out

over and above water proofing cement plaster

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

36 Providing & Laying integrated cement based proprietary 80.00 Sqm 883.92 Rupees Eight Hundred

water proofing treatment of required thickness over the roof Eighty Three And Paise

including 10mm thick water proofing cement plaster in Ninety Two Only

cement mortar 1:3 and CHINA MOSAIC fitting and finally

finishing the surface with white cement slurry and slopping

out terrace slab with following specification laid to required

slope not flatter than 1:80 (the thickness of water proofing

treatment near rain water outlet or the lowest point of the

finished slope shall not be less than 45mm including treating

the vertical surface of the parapet wall upto 20cms. height

above finished level of terracing including finishing top with

joint less water proofing plaster, curing, testing etc.

completed. Rate is including 10 years performance of

guarantee bond to be given on stamp paper (No extra shall

be paid for increase in thickness for proper slope)

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

Applying and grouting a slurry coat of neat cement using

2.75 kg/sqm of cement admixed with proprietary water

proofing compound conforming to IS-2645 over the RCC

slab including cleaning the surface before treatments.

Laying cement concrete using broken bricks bats 25mm to

40mm size with 50% of cement mortar 1:4 (1cement :

coarse sand) over 10mm thick water proofing cement plaster

in cement mortar of mix 1:3 (1cement : 3 coarse sand)

admixed with proprietary water proofing compound

confirming to IS-2645 to required slope and treating similarly

the adjoining walls upto 200mm height including rounding of

junction of walls. After two days of proper curing applying a

second coat of cement slurry. Finishing the surface with

china mosaic pieces laid in 10mm thick joint less cement

mortar of mix 1:3 (1cement : 3 coarse sand) admixed with

proprietary water proofing compound confirming to IS-2645

and finally finishing the surface with trowel with neat cement

37 Providing and laying Damp Proof Suprema white on Terrace 1060.00 Sqm 409.30 Rupees Four Hundred

Surfaces (Two Coats) over and above Applying one coat of Nine And Paise Thirty Only

primer to give in Required Cleaning of Terrace and open old

Vatta of China mosaic after throughly brushing the surface

to remove all dirt and remains of loose powdered matrials

etc. complete. Primer and Damp proof shall be used as per

approved materials list of GSPHCL or Instruction as

Engineer Incharge. The whole terrace so finished shall be

flooded with water fora minimum period of two weeks for

curing for final taste. Rate are including Ten Years

performance of gayrantee bond to be given on Stamp

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

38 Providing and fixing wsh down water closet (orrisa type, 25.00 No 1354.44 Rupees One Thousand

W.C. Pan) with integral P or S trap including jointing the trap Three Hundred Fifty Four

with soil pipe in Cement Mortar 1:1(1-Cement:1-finesand) And Paise Forty Four Only

(Seal and covertobe measured and paid for separately)

(A)vitreous China Pattern:(i)in white colour

Providing and fixing plastic seat and cover for wash down

watercloser with C.P.brasshinges and rubber buffers. (B)

Black plastic seal and cover.

39 Provinding and Filling Cinder including watering, 12.00 Cum 791.69 Rupees Seven Hundred

consolidation etc. complete Ninety One And Paise

Sixty Nine Only

40 Provinding and fixing PVC SWR Nahni Trap of the following 47.00 No 595.98 Rupees Five Hundred

nominal dia. Self cleaning design with top jali and stainer Ninety Five And Paise

including cost of cutting and making good the walls and Ninety Eight Only

floors 100mm inlet and 50mm outlet. Including 150mm x

150mm stainless steel jali.

41 P & L ordinary Cement Concrete 1:2:4 including finishing 16.00 Cum 3867.19 Rupees Three Thousand

smooth and curing complete, including cost of formwork but Eight Hundred Sixty Seven

excluding cost of reinforcement. For all Floors. And Paise Nineteen Only

42 Providing and laying Ceramic tiles 8mm thick in flooring 152.00 Sqm 1007.23 Rupees One Thousand

treads of steps and landing laid on a bed of 12mm thick Seven And Paise Twenty

cement mortar 1:3 (1-cement:3-coarsesand) finishing with Three Only

flush pointing in white cement with required pigment. Size of

the tiles shall be as mentioned in specified tender item.

Brand of the tiles shall be as per approved make list of

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

43 Providing and laying Ceramic tiles 8-10mm thick in riser 66.00 Sqm 1081.15 Rupees One Thousand

of steps and dado on a bed of 10mm thick cement mortar Eighty One And Paise

1:3 (1-cement : 3-coarse sand ) finishing with white cement Fifteen Only

with required pigment. Size of the tiles shall be as

mentioned in specified tender item. Brand of the tiles shall

be as per approved make list of GSPHCL.

44 Providing and laying 25mm thick polished KOTAH STONE 12.00 Sqm 1009.30 Rupees One Thousand

SLAB FLOORING over 20mm average thick base of cement Nine And Paise Thirty Only

mortar 1:6(1 cement; 6 coarse sand) over and jointed with

grey cement slurry including rubbing and polishing etc.

complete for All floors.

45 Provinding and fixing to wall ceiling and floor 4kg/ cm2 148.00 Rmt 151.16 Rupees One Hundred Fifty

working pressure I.S.I mark PVC pipe of 75mm dia high One And Paise Sixteen

density complete with specials flinges, compressor type Only

fitting G.I. Slotted Z patti of 16 Gauge (minimum 1.60mm

thick) and minimum 6mm dia. U Clamp with Washer Nut

at every 1.20mt., wall clipe on wooden patty including

making good the, ceiling and floor rain water pipe shall be

75mm dia. PVC horizontal pipe and vertical pipe and 75mm

PVC bend at the end near by ground level.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

46 Providing & Fixing to Wall Ceilling and Floor SWR Rain 35.00 Rmt 323.15 Rupees Three Hundred

Water pipe as Per IS-13592 of 90mm Dia. Complete with Twenty Three And Paise

Special Flings, Compressor type Fittings like G.I. Slotted Z Fifteen Only

patti of 16 Gauge (minimum1.60mm thick) and minimum

6mm dia. U Clamp with Washer Nut at every 1.20mt.

vertical distance including All Labour Charges etc. complete

including making good the Ceilings, Floors and on terrace.

Rain water pipe shall be 90 mm Dia. SWR horizontal pipe

and vertical pipe and 90mm bend at the end near by Ground

level. Rate are Inclusive of all Necessary Fittings required for

47 Providing and fixing to wall, ceiling and floor U.PVC SWR 236.00 Rmt 264.97 Rupees Two Hundred

Soil Waste Pipe with 'O' Ring 75 mm dia. of ISI 13592/92. Sixty Four And Paise

Rate inclusive of All fittings like single or double 'Y' with Ninety Seven Only

door, reducer, coupler single 'T' with door bend, G.I. Slotted

Z patti of 16 Gauge (minimum1.60mm thick) and

minimum 6mm dia. U Clamp with Washer Nut at every

1.20mt. vertical distance including All Labour Charges etc.

complete and making good the Wall, Ceiling and Floor.

48 Providing and fixing to wall, ceiling and floor U.PVC SWR 174.80 Rmt 495.91 Rupees Four Hundred

Soil Waste Pipe with 'O' Ring 110 mm dia. of ISI 13592/92. Ninety Five And Paise

Rate inclusive of All fittings like single or double 'Y' with Ninety One Only

door, reducer, coupler single 'T' with door bend, G.I. Slotted

Z patti of 16 Gauge (minimum1.60mm thick) and

minimum 6mm dia. U Clamp with Washer Nut at every

1.20mt. vertical distance including All Labour Charges etc.

complete and making good the Wall, Ceiling and Floor.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

49 Provinding and fixing in position PVC COWEL VENT to pipe 25.00 No 16.47 Rupees Sixteen And Paise

75 mm dia. Forty Seven Only

50 Provinding and fixing in position PVC COWEL VENT to pipe 15.00 No 28.16 Rupees Twenty Eight And

110 mm dia. Paise Sixteen Only

51 Providing and fixing PVC Printed pain colour false ceiling 43.00 Sqm 766.00 Rupees Seven Hundred

with grid type with alluminium frame consisting of 600mm x Sixty Six Only

600mm 3mm thick plain PVC sheet used as panel insert in a

frame work made using anodized alluminium T section of

size1 x 1 (235 x 25mm, 19 gauge or 1 mm thick) in square

patternof grid sizes of 2 x 2 (600 x 600mm) The alluminium

framework is supported from the cceiling with the help of G.I.

hookand G.I. wire/6mm M.S. rods of required sizes to

maintainproper level etc. The aluminium frame work is

supported onside wall with the use of alluminium L section of

size 1 x 1 (25x 25mm) angles etc. complete as per direction

of Engineer incharge. Manufactures specification and

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

52 Providing and fixing Polyvinly cloride (PVC) Door frame of 110.00 Sqm 1449.90 Rupees One Thousand

size 50 x 47mm with a wall thickness of 5mm thick made out Four Hundred Forty Nine

of extuded 5mm rigid PVC foam sheet, mitre cut at two And Paise Ninety Only

corners and jointed with 2 Nos. of 150mm long brackets of

15 x 15mm M.S. square tube. The two vertical door profiles

are to be reinforced with 19 x 19mm M.S.squre tube of

gauge, EPDM rubbergasket weather seal to be provided

through out the rame. The door frame shall be fixed to the

wall using 65/100mm long M.S. scresws through the frame

by using PVC fasteners A minimum of 4 Nos. of screws to

be provided for horizontal member Providing and fixing

30mm thick Solid Panel PVC Door Shutter consisting of

frame made out of M.S. tubes of 19 gauge (16mm)

thickness and size of 19mm x 19mm for stiles, & 15mm x

15mm for top & bottom rails M.S. frame shall have a coat of

steel primers of approved make and manufactures M.S.

frame shall be covered with 5mm thick heat moulded.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

PVC 'C' channels of size 30 x 50mm forming stiles. and

5mm thick, 75mm wide PVC sheets for top rail. lock rail &

bottom rail on either siede, and 10mm (5mm x 2)

thick,20mm wide cross PVC sheet as gap insert for top rail &

bottom rail. Panelling of 5mm thick PVC sheet to be fitted in

the M.S. frame welded /sealed to the stiles & rails with

30mm wide x 5mm thick PVC Sheets beading on either side,

and jointed together with solvent cement adhesive etc. An

additional 5mm thick PVC strip of 20mm width is to be struck

on the interior side of the'C" Channel using PVC solvent

adhesive and stainless steel (grade 316) fixtures & fastening

4 nos. of hinges (100mm x 58mmx1.9mm)Two Nos. of

Aldrop of 200 mm x 16 mm, Stopper 150 mm x 10 mm &

Handle 125 mm long as per detail drawing etc. complete as

direction of Engineer-in-Charge.

53 Providing and fixing standard extruded of alluminium section 31.00 Sqm 1163.92 Rupees One Thousand

of size 63 x 38.10 x 1.2 mm ( Jindal section NO:2434,@Wt One Hundred Sixty Three

0.643 Kg/RMT )with colour aNOdized alluminium frame for And Paise Ninety Two

ventilation with 5 mm thick frosted glass as details etc Only

complete for ventilation

54 Providing and fixing FRP/PVC sheet chajja including all 60.00 Sqm 2011.38 Rupees Two Thousand

required fabrication job with fixing at site by means of Eleven And Paise Thirty

fasteners/civil works by chipping and remaking good finish Eight Only

plastering etc complete. Job includs water proofing

treatment on the junction of wall and chajja with providing

required water proof sealant, cement vata etc complete as

per direction of site enginner.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

55 Providing and fixing Concealed center point to wall, ceiling 152.00 Rmt 206.73 Rupees Two Hundred Six

and floor CPVC pipes SDR-13.5 PIPE having national And Paise Seventy Three

sanitation foundation (NSF) seal for potable waterof Only

following dia nominal bore tube fitting and clamps including

making good the wall,ceiling and floor etc..complete. [B]

56 Providing and fixing Concealed center point to wall, ceiling 272.00 Rmt 251.31 Rupees Two Hundred Fifty

and floor CPVC pipes SDR-13.5 PIPE having national One And Paise Thirty One

sanitation foundation (NSF) seal for potable waterof Only

following dia nominal bore tube fitting and clamps including

making good the wall,ceiling and floor etc..complete. [C]

57 Providing and fixing concealed or open center point to wall 125.00 Rmt 334.89 Rupees Three Hundred

ceiling & floor CPVC (SDR 13.5) PIPE having National Thirty Four And Paise

Sanitation Foundation (NSF) seal for potable water of Eighty Nine Only

following dia. nominal bore tube fittings with 6mm Dia U

Clamp with washer for Vertical water supply pipe. Pipe shall

be concealed or open as mention in tender description. Pipe

shall be as per approved make of GSPHCL make list [D]

58 Providing and fixing concealed or open center point to wall 151.00 Rmt 443.29 Rupees Four Hundred

ceiling & floor CPVC (SDR 13.5) PIPE having National Forty Three And Paise

Sanitation Foundation (NSF) seal for potable water of Twenty Nine Only

following dia. nominal bore tube fittings with 6mm Dia U

Clamp with washer for Vertical water supply pipe. Pipe shall

be concealed or open as mention in tender description. Pipe

shall be as per approved make of GSPHCL make list [E]

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

59 Providing and fixing in position ISI marked Rotational 6500.00 Litre 3.91 Rupees Three And Paise

moulded Polyethylene double layer cylindrical vertical Ninety One Only

storage Tank (IS : 1270) water Tank Size including marking

inlet and outlet. Over flow and washout arrangement with

G.I. connection including using necessary M.H. for

connection etc. complete with closed cover including

applying two coats of oil painting outside the Tank etc.

60 Provinding and fixing gun metal check or non return full way 12.00 No 656.86 Rupees Six Hundred Fifty

WHEEL / HANDLE VALVE 40 mm dia. Six And Paise Eighty Six

61 Provinding and fixing gun metal check or non return full way 10.00 No 311.61 Rupees Three Hundred

WHEEL / HANDLE VALVE 32 mm dia. Eleven And Paise Sixty

62 Provinding and fixing gun metal check or non return full way 3.00 No 416.47 Rupees Four Hundred

WHEEL / HANDLE VALVE 25 mm dia. Sixteen And Paise Forty

63 Providing & Fixing Wall Hung with PVC Flush Tank, Soft 6.00 No 5470.90 Rupees Five Thousand

Seat Cover & intergal "P" or "S" Trap including Jointing the Four Hundred Seventy And

Trap with Pan and Soil pipe. Wall hung shall be fixed on S.S Paise Ninety Only

heavy duty rack bolt having 16mm dia, 165mm length using

Plastic sleeve Make by Using Drill Bitt Only. Rate are

inclusive of all matreials, Labour & Necessary Fittings etc.

Complet as per Detailed Drawings, Specifications and as per

the Instruction of Engineer In charge.The Model & Make of

Wall Hung & Flush tank Shall be as per the Approved Make

List of G.S.P.H.C.L.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

64 Providing and fixing wsh down water closet (European type, 1.00 No 1631.83 Rupees One Thousand Six

W.C. Pan) with integral P or S trap including jointing the trap Hundred Thirty One And

with soil pipe in Cement Mortar 1:1(1-Cement:1-finesand) Paise Eighty Three Only

(Seal and covertobe measured and paid for separately)

(A)vitreous China Pattern:(i)in white colour Providing and

fixing plastic seat and cover for wash down watercloser with

C.P.brasshinges and rubber buffers. (B) Black plastic seal

65 Providing & Fixing Single Hole Wash Basin with C.I or M.S. 21.00 No 3935.33 Rupees Three Thousand

brackete & M. I . fisher union, P.V.C water pipe with Nine Hundred Thirty Five

Connection from Stop Cock to Pillar Tap, PVC Bottle Trap And Paise Thirty Three

with Connection 32mm dia. C.P. brassa waste coupling etc. Only

Complete. Rate are inclusive of all matreials, Labour &

Necessary Fittings etc. Complete as per Detailed Drawings,

Specifications and as per the Instruction of Engineer In

charge. The Model & Make of Wash Basin Shall be as per

the Approved Make List of GSPHCL.

66 Providing & Fixing C.P. Brass Waste for Washbasin or Sink 14.00 No 67.24 Rupees Sixty Seven And

(A) 32 mm Paise Twenty Four Only

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

67 Providing & Fixing Single Hole Urinal with C.I or M.S. 3.00 No 2098.98 Rupees Two Thousand

brackete & M. I . fisher union, P.V.C water pipe with Ninety Eight And Paise

Connection from Stop Cock to Pillar Tap, PVC Bottle Trap Ninety Eight Only

with Connection 32mm dia. C.P. brassa waste coupling etc.

Complete. Rate are inclusive of all matreials, Labour &

Necessary Fittings etc. Complete as per Detailed Drawings,

Specifications and as per the Instruction of Engineer In

charge. The Model & Make of Wash Basin Shall be as per

the Approved Make List of GSPHCL.

68 Providing & Fixing Health Faucets (ABS Body). Rate are 5.00 No 565.51 Rupees Five Hundred

inclusive of all matreials, Labour & Necessary Fittings etc. Sixty Five And Paise Fifty

Complet as per Detailed Drawings, Specifications and as per One Only

the Instruction of Engineer In charge. The Model & Make of

Health Faucets Shall be as per the Approved Make List of

69 Providing & Fixing Stop /Angle COCK 15mm dia make & 21.00 No 665.51 Rupees Six Hundred Sixty

Model No As per Approved material list of G.S.P.H.C.Ltd Five And Paise Fifty One

Incl. with all neccery fitting etc. Complete. Only

70 Providing & Fixing One way BIB COCK 15mm dia with wall 22.00 No 990.61 Rupees Nine Hundred

flange Make And Model Number As Per Approved Material Ninety And Paise Sixty

List Of GSPHCL Incl. with all neccery fitting One Only

71 Providing & Fixing 15mm P.V.C. Bib Tap approved Brand of 65.00 No 41.19 Rupees Forty One And

GSPHC only. Rate inslusive all labour and tools etc. Paise Nineteen Only

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

72 Providing and fixing chromium plated brass half trun flush 6.00 No 261.16 Rupees Two Hundred

complete.(ii) 25mm dia. Sixty One And Paise

73 Providing & fixing S.W. gully trap without grating brick 10.00 No 1176.94 Rupees One Thousand

masonary chamber & water tight C.I. Cover of size 300 mm One Hundred Seventy Six

x 300mm size with standard weight (1) square mouth trap And Paise Ninety Four

150mm x 100mm size "P" or "R" type. Only

74 Constructing Brick Masonary Chamber for underground C.I 4.00 No 3793.18 Rupees Three Thousand

inspection chamber and bends with brick having crushing Seven Hundred Ninety

stenghth not less then 35 kg/ cm2 in C.M 1:5 R.C.C top slab Three And Paise Eighteen

1:2:4 mix (1 cement : 2 coarse sand :4 graded stone Only

aggregate 20mm nominal size ) with 8mm dia steel at

cm. C.C and foundation concrete 1:5:10 inside plaster

15mm thick with a flotting coat of neat cement walls and bed

concrete etc. complete. Rate are also inclusive of outside

plaster 15mm thick in C.M 1:3 from top of chamber and all

side upto 45cm deep for multi Or Single purpose pipe line,

Inside Dimension of Inspection Chamber size (ii) 610mm

x 455mm and 450mm Deep. (Without RCC Cover With

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

75 Constructing Brick Masonary Chamber for underground C.I 6.00 No 5495.18 Rupees Five Thousand

inspection chamber and bends with brick having crushing Four Hundred Ninety Five

stenghth not less then 35 kg/ cm2 in C.M 1:5 R.C.C top slab And Paise Eighteen Only

1:2:4 mix (1 cement : 2 coarse sand :4 graded stone

aggregate 20mm nominal size ) with 8mm dia steel at

cm. C.C and foundation concrete 1:5:10 inside plaster

15mm thick with a flotting coat of neat cement walls and bed

concrete etc. complete. Rate are also inclusive of outside

plaster 15mm thick in C.M 1:3 from top of chamber and all

side upto 45cm deep for multi Or Single purpose pipe line,

Inside Dimension of Inspection Chamber size (ii) 610mm

x 455mm and 450mm Deep. (With RCC Cover With Frame

HD20 Size 600*450mm)

76 Extra over above item for additional depth of 0.1 m or part 12.00 No 239.99 Rupees Two Hundred

thereof beyond 450mm depth for brick masonary chamber Thirty Nine And Paise

for (I) 610 x 455 Ninety Nine Only

77 Repairing of Inspection Chember Inside Dimension of IC 6.00 No 500.00 Rupees Five Hundred Only

(455mm x 610mm) etc. Complete.

78 Providing & Fixing Precast R.C.C Frame with cover MD 10 17.00 No 1702.00 Rupees One Thousand

Ton (Rubber Mould Finish) inner size 600 x 450mm with all Seven Hundred Two Only

necessary fittings.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

79 Providing & fixing precast RCC cover including angle frame 5.00 No 585.76 Rupees Five Hundred

of 40mm X 40mm X 3mm section & CC 1:1.5:3 precast Eighty Five And Paise

i.c.cover for chamber etc.including 8mm HYSD steel at 15 Seventy Six Only

cm C/C both way & oilpainting of angle frame & finishing of

concrete with CM 1:3 etc. complete finished dimention of

concrete cover shall be 0.45m X 0.6m X 0.07m size rate are

inclusive of cost of angle frame, reinforcement, conrete,

finishing work & two pieces of M.S. flat 25mm X 3mm size

80 Scrubbing of existing colour and Painting two coats ( 663.00 Sqm 102.41 Rupees One Hundred Two

Excluding priming coat ) on previously painted steel and And Paise Forty One Only

other material surfaces with enamel paint brushing to give

an even shade including cleaning the surface of all dirt, dust

and other foreign matter.

81 Scrubbing of existing colour and Painting two coats ( 555.00 Sqm 118.09 Rupees One Hundred

Excluding priming coat ) on previously painted wood and Eighteen And Paise Nine

wood based surfaces with enamel paint brushing to give an Only

even shade including cleaning the surface of all dirt, dust

and other foreign matter.

82 Removing dry or oil bound distemper by a washing and 2424.00 Sqm 13.71 Rupees Thirteen And

scraping and sand papering the Ceiling surface smooth Paise Seventy One Only

including necessary repairs to scratches Complete

83 Plastic paint (two coats) with oil bound distemper of 1399.00 Sqm 199.13 Rupees One Hundred

approved brand and manufacture and of required shade on Ninety Nine And Paise

Ceiling surface to give an even shade, over and including a Thirteen Only

priming coat with distemper primer of approved brand and

manufacture after thoroughly mortar droppings and other

foreign matter and also including preparing the surface

even including lapi finishing and sand papered smooth.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

84 Distempeing (two coats) with oil bound distemper of 1225.00 Sqm 88.20 Rupees Eighty Eight And

approved brand and manufacture and of required shade on Paise Twenty Only

Ceiling surface to give an even shade, over and including a

priming coat with distemper primer of approved brand and

manufacture after thoroughly mortar droppings and other

foreign matter and also including preparing the surface

even including lapi finishing and sand papered smooth.

85 Removing dry or oil bound distemper by a washing and 12171.00 Sqm 11.97 Rupees Eleven And Paise

scraping and sand papering the wall surface smooth Ninety Seven Only

including necessary repairs to scratches Complete

86 Plastic paint (two coats) with oil bound distemper of 4007.10 Sqm 185.40 Rupees One Hundred

approved brand and manufacture and of required shade on Eighty Five And Paise

wall surface to give an even shade, over and including a Forty Only

priming coat with distemper primer of approved brand and

manufacture after thoroughly mortar droppings and other

foreign matter and also including preparing the surface even

including lapi finishing and sand papered smooth.

87 Distempeing (two coats) with oil bound distemper of 3720.00 Sqm 79.53 Rupees Seventy Nine And

approved brand and manufacture and of required shade on Paise Fifty Three Only

wall surface to give an even shade, over and including a

priming coat with distemper primer of approved brand and

manufacture after thoroughly mortar droppings and other

foreign matter and also including preparing the surface even

including lapi finishing and sand papered smooth.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

88 Finishing walls with Weather Proof Exterior Emulsion 6097.00 Sqm 155.21 Rupees One Hundred Fifty

Paint on Wall Surfaces (Two Coats) over and above Five And Paise Twenty

Applying one coat of Primer to give an Required shape and One Only

even shade after thoroughly brushing the surface to remove

all dirt, and remains of loose powdered materials etc.

complete. Primer and Exterior Emulsion Paint shall be

used as per approved material list of GSPHCL.

89 Providing, Fabricating and fixing M.S. GRILL/GATE of 1475.00 Kg 75.30 Rupees Seventy Five And

approved pattern fabricated from M.S. flat,square bars, Paise Thirty Only

round bars,c-channel, box pipe as per detail Drawings. Rate

is inclusive of welding with grinding smooth surface, two

coats of Oil paint and one coat of yellow Zinc primer coat of

approved brand only. Oil paint shall be Luxol Enamel paint

of Berger Paint india limited. or asian paint apcolite

premium gloss Enamel of asian paint or Dulux premium

gloss enamel of dulux paint and nerolac synthetics enamel

of nerolac paint for all floor and at any height only.

Structural Steel material should be used ISI marked

90 Providing and Fixing 6 mm thick Lexan Polycarbonate multi 81.00 Sqm 1427.62 Rupees One Thousand

wall roofing sheet fixed with hilti screw and rubber silicon Four Hundred Twenty

sealer and alluminium strip of size 50 x 3 mm etc complete. Seven And Paise Sixty

as directed by Engineer in charge. Two Only

91 Providing and Corrugated JSW Pre coated sheet roofing 271.00 Sqm 984.37 Rupees Nine Hundred

fixing with galvanised iron J or L hooks, Bolts and nuts 8mm Eighty Four And Paise

Diameter with bitumen and G. I. Limpet washer or G. I. Thirty Seven Only

Limpet washer with white lead complete excluding the cost

of Purlins, Rafter and trusses. (0.60mm thick)

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

92 Credit value for UPVC pipes Rate are inclusive of 546.00 Rmt -8.00 Rupees Eight Only -4368.00

dismentalling of PVC Pipes

93 Credit value for PVC pipes Rate are inclusive of 182.00 Rmt -8.00 Rupees Eight Only -1456.00

dismentalling of PVC Pipes

94 Credit value for MS grill/ GI Grill on any dia etc complete 1135.00 Kg -30.00 Rupees Thirty Only -34050.00

95 Credit value for MS /GI pipes having any Dia of Pipe etc. 183.00 Rmt -30.00 Rupees Thirty Only -5490.00

96 Credit value for Door & Window etc. Complete… 67.00 No -500.00 Rupees Five Hundred Only -33500.00

97 Cradit Value for Aluminuam Vantilation etc…. 54.00 No -50.00 Rupees Fifty Only -2700.00

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

98A Providing & erecting Point wiring with approved ISI 275.00 Point 425.00 Rupees Four Hundred

marked 1.1 KV grade 2 X 1.5 sq.mm. copper PVC insulted Twenty Five Only

FRLS wire with 1.5 sq.mm. (green) copper PVC insulated

FRLS wire for earth continuity in FIA approved ISI mark

medium class white colour 20/25 mm dia. embossed rigid

PVC pipe with PVC fitting fixed with adhesive solution

erected on brick wall along with approved make 5/6 Amp. ISI

mark modular type switch and accessories mounted in 20 G.

G.I. company fabricated metallic box/PVC/polycarbonet /

acrylic Box covered with appropriate front plate modules

erected flushed with wall / ceiling with necessary modular

lamp holder / modular ceiling rose / HD Connector (make &

model approved by EIC and matching colur with switches

accessories) as directed for concealed wiring Deep Junction

box 75mm depth if required) (a) Light point. Cat.-II (For

[Length of point wiring must not increase than 10 mtr. For

that necessary switch board and their location must be

finalised before execution by agency otherwise payment will

not be done for extra long point. For future extention, if

required, agency has to erect one higher size polished

wooden box as per instruction of EIC & Wire must be

having box packing]. [conductor resistance should be as per

98B For Secondary Light Point. Cat.-II. 7.00 Point 131.00 Rupees One Hundred

Thirty One Only

98C For Bell Point Cat.-II 21.00 Point 425.00 Rupees Four Hundred

Twenty Five Only

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

98D For Fan Point (with 6 A. Modular type switch and two 64.00 Point 612.00 Rupees Six Hundred

module hum free EME Five step type Electronic fan Twelve Only

regulator both having ISI mark) Cat.-II

98E For separate Point (with 6 Amp. Switch & 3/5 pin socket 85.00 Point 455.00 Rupees Four Hundred Fifty

both having ISI mark) Cat.-II Five Only

98F For Looped on switch board (with 6 Amp.Switch & 3/5 pin 180.00 Point 234.00 Rupees Two Hundred

socket both having ISI mark) Cat.-II. Thirty Four Only

99 Providing and erecting Medium Class FIA approved and ISI 300.00 Mtr. 24.00 Rupees Twenty Four Only

mark white colour (embossed) RIGID PVC PIPES of

following size complete erected with necessary PVC fittings

& Junction boxes fixed with adhesive solution & clamps on /

in wall / ceiling along with continuous fish wire to draw mains

with necessary fittings and junction boxes for following dia.

(a) 20 mm. dia.

100A Providing and laying Mains with FRLS PVC Insulated wire 950.00 Mtr. 62.00 Rupees Sixty Two Only

ISI marked 1.1 KV grade with FIA approved ISI mark

medium class 20/25/32 mm dia. embossed rigid PVC pipe

with PVC fitting fixed with adhesive solution to be erected on

brick wall /Slab with FRLS PVC insulated wire for earth

continuity. (Approved ISI make only) [a] 2 x 1.5 sq.mm.

FRLS copper multi stranded conductor mains with

sq.mm. FRLS copper multi stranded conductor for earthing

as per standard colour code.

100B 2 x 6.0 sq.mm. FRLS copper multi stranded conductor 750.00 Mtr. 146.00 Rupees One Hundred

mains with 2.5 sq.mm. FRLS copper multi stranded Forty Six Only

conductor for earthing as per standard colour code.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

101 Providing & fixing 25 mm. dia. PVC insulated G.I. 50.00 Mtr. 37.14 Rupees Thirty Seven And

Corrugated Flexible pipe with necessary socket, PVC Paise Fourteen Only

bushes, saddle, Check-nuts etc. complete of following sizes.

102 Providing and erecting Plug Point wiring with approved ISI 85.00 Point 678.00 Rupees Six Hundred

make 2 x 2.5 sq.mm copper PVC insulated FRLS wire Seventy Eight Only

with 1.5 sq.mm (green) copper PVC insulated FRLS wire

for earth continuity in white FIA approved ISI mark

medium class 20/25/32 mm dia. embossed rigid PVC pipe

with PVC fitting with approved make white accessories with

FRLS PVC insulated wire for earth continuit with 16 Amp. ISI

marked flush type modular switch / Socket and accessories

erected on PVC / Acrylic / polycarbonet box, single mounting

base frame covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected.

For open wiring [a] 16 A.Indicator switch & 1 No. 6/16 A.

universal socket combined white colour suitable for 3 pin

top duly. Cat.-II. (Conductor resistance should be as per

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

103 Providing & Erecting 2.0 mtr long Earthing system by 5.00 Each 7025.00 Rupees Seven Thousand

making minimum bore of 225 mm dia in soft soil. Suitable for Twenty Five Only

doing pipe-in-pipe technology earthing.Earthing electric rod

must be made from Corrosion free Hot dip galvanizing pipes

having following specification.

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D.,

ISI 'B ' Class ISI mark of Reputed Brand, Inner pipe:- 42 mm

minimum O.D., Pipe B Class ISI mark reputed Brand

Terminal Size: 70mm X 100mm length, Terminal Should be

made from inner pipe for that pipe must be pressed and

gave rectangular shape so its work as a terminal.The hot

deep galvanising must be done after above

process.Galvanised thickness must be minimum 75 micron

any where. SS Nut bolt:- 2 no.with washer suitable for

14mm dia. hole must be provided at terminal. total minimum

Weight(approx.) of earth electrodewith inside conductive

material minimum should be 26 kg.

(B) Inner chemical (CCM Compound)- Resistivity:-

ohm/meter testing as per IEC 62561-2017, Voltage drop:- <

1 volt at no load & dry form, Sulphar content:- <2%

(C) Back fill Compound:- Earthing compound should be

capable to retain moisture for long time Back Filling

Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size

of 400 mm X 400 mm X 400 mm depth and Cover should be

heavy duty cast iron with required size of 300 mm X 300 mm

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL

accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed

4. General test report from OEM regarding specification of

[Make and model approved by EIC Strictly subject to item

specification only] [OEM has to submit all detail & sample for

approved before supplying]

[Water must be poured in bore before starting earthing.

Earthing value must be measured with earth tester. Agency

has to bring the earth resistance to at least 02 ohms &

voltage between neutral & Earthing upto 02 volt. Agency has

to maintain earthing & its value for one year. Earthing must

be done in the presence of A.E. (GSPHCL)]

104 For above earthing additional charges for boring in hard 5.00 Each 276.00 Rupees Two Hundred

rock soil (by breaker) & filling soft soil in earth pit (certificate Seventy Six Only

for soil have to given by DEE / AE along with photographs)

105 Supplying & Erecting Decorative Ding Dong bell Stereo 21.00 Each 170.00 Rupees One Hundred

type 250 Volt complete erected on existing polished wooden Seventy Only

block or in M.S. box with 3mm thick white ISI mark laminated

sheet. [Anchor (Chime model), vision, rider Make]

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

106A Providing and erecting following type of Modular Type 21.00 Each 139.00 Rupees One Hundred

Accessories mounted with 20 G G.I. company fabricated Thirty Nine Only

metalic box, single mounting base frame covered with

textured / metallic front plate, modules erected with

necessary connection. As desired by Engineer in charge. TV

Co-axial Socket outlet Cat-II.

106B For Blank Plate Single Cat-II 200.00 Each 16.00 Rupees Sixteen Only

107 Providing and erecting modular type accessories mounted 21.00 Each 502.00 Rupees Five Hundred Two

on 20G G.I. company fabricated galvanised metal box Only

covered with approriate front plate modules erected flushed

with wall/Ceiling with 1 Nos. of 16 Amp SP indicator

Switch & 3 Nos. of 6 Amp 3/5 pin plug. [For TV Switch

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

108 Supplying and Erecting LED indoor fitting of 71.00 Each 370.00 Rupees Three Hundred

approximately 4 feet long with LED of wat age 0.2W to Seventy Only

0.5W assemble on single MCPCB with housing use as a

heat sink shall be made from Aluminum extrusion having

enough strength (sample must be approved by EIC) with

polycarbonate diffuser with following specification: (A)

Company mark/name on the fitting.(B) Rated input voltage

and frequency: 220V to 240 VAC ; 50Hz. (C) Rated input

wattage: max. 24w (D) Rated input current : 0.2 Amp, (E)

Power Factor : Min. 0.90, (F) ATHD : Max. 15% , (G) Rated

Luminous flux: Min. 2420 lm, (H) CCT: 6500K, (I) CRI: Min.

80Ra, (J) Driver Ef iciency: Min. 80%, (K) LED life span: Min.

50000 Hrs @ L70, (L) Over Voltage protection: Withstand up

to 440V/AC for 4 Hrs., (M) Surge protection : Min. 2KV, (N)

IP rating: IP 20, (O) IK rating : IK 02, (P) Short circuit , Open

circuit & Reverse Polarity Protection must be provided (Q)

Fixing clamp design & strength should be suf icient to hold

the fitting erected on wall or ceiling., (R) 3 core copper wire

of appropriate size with earthing connector (Note:-The

manufacturer/ authorized Channel partner of the

manufacturer has to submit 5 yrs free replacement

Guarantee for complete Fixture) [Approval will be given

strictly subject to item specification]

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

109 Providing, erecting, testing Ceiling Fan confirming to IS: 44.00 Each 1929.00 Rupees One Thousand

374/1979 AMDT No. 1 to 6 Class-I, 50 Hz. Specification of Nine Hundred Twenty Nine

Ceiling Fan must be as per below. (1) Sweep: 1200 mm, (2) Only

Operating Voltage: 180 to 230 V, (3) Power Factor: > 0.9, (4)

Power Consumption: maximum 53W, (5) RPM: minimum

330, (6) Service value:min 4.3 m3/min. (7) Class of

insulation: 'B', (8) No. of heavy duty premium quality Ball

bearing: Two, (9) Total Body: Top & Bottom should be

alluminium, (10) Blade: Aluminium approx 1.1 mm thick, (11)

Colour: White high grade powder coating, (12) Canopy: Two

Nos. Heavy duty, (13) Condenser: min 1.5 MFD (15%

Tolerance )as per is 1709-1984, Aluminium body premium

quality, Branded make,(14) Down road: up to 1.0 mtr as per

site requirment, (15) Required fixing accessories, (16)

core 0.75 sq.mm ISI wire as per site requirment, (17) No

vibration and noise due to mechanical parts. (Agency has to

erect safey wire with ceiling fan and checked with EIC)

(OEM has to approved model as per tender specification

and tested at ERDA) (Necessary test reports should be

submitted strictly at the time of approval. Sample approved

by EIC subject to above specification only)

110 Providing & Erecting Fan clamp of 30 x 5 mm flat of 44.00 Each 98.00 Rupees Ninety Eight Only

required length & 10 mm M.S. Bolt & Nuts erected with

necessary hook of 10 mm M.S. Round Bar.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

111 Providing and erecting polycarbonet body surface mounting 11.00 Each 780.00 Rupees Seven Hundred

LED Bulk head type 9 watt Lighting Fitting with electronic Eighty Only

driver having THD < 15%, CRI>80, P.F.0.95 And lumen

output from luminaire 720 lm, input voltage range 160-270 V

AC, 50 Hz cool white (3000 to 6500 k), inbuilt driver having

efficiency >=80lm/w, -20 deg C to + 60 deg C working

temperature, AL frame with Beam Angle 120 deg.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

112 Providing ad erecting approved make single phase Single 21.00 Each 4287.00 Rupees Four Thousand

Door metal clad D.B. as per relevant indian standards Two Hundred Eighty

ammended upto date. Seven Only

Supplying and fixing following way single phase MCB

distrubution board of company fabricated sheet box with

powder coated inside and outside after apply seven tank

chemical process of CRCA sheet cover complete with

suitable integral single piece construction tinned copper

busbar and link with all necessary interconnection and with

necessary size MS frame for mounting MCBDB. MCBDB

Door, Back side and Body of MCBDB must be made of

mm thick CRCA Sheet. Manufacturer must be provided (1)

IP 30 and as per IS:8623-1 & 3, IEC 61439-1 & 3 having D

type PU gasket. (2) Seven tank Powder coating Certificate

(3) Tinned Copper/Brass make neutral & Earthing link with

isolation & Protecting Cover for 240 Volts on surface /

recess complete with loose wire box, terminal connectors for

all incoming and outgoing circuits, with suitable size FRLS

PVC insulated copper conductor up to terminal blocks and

internal connection, tinned coppper bus bar, 1 no. tinned

copper neutral link, tinned copper earth bar, din bar,

detachable gland plate, interconnections, powder painted

including earthing etc.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

Single phase incoming and horizontal single phase outgoing.

For 12 Way MCBDB: Including 1 no. 40 Amp. 30 mA double

pole ELCB (ELCB confirming to IS:12640/1988 having

sensitivity of 30 mA and breaking capacity of 10 KA), 1 no.

MCB 40 Amp. double pole switch (C curve confirms to

IS:8828 having breaking capacity of 10 KA) and S.P. MCB

of rating 6 to 32 Amp. with NL suitable to operate on

Volt A.C. power. (6 Amp:- 3 Nos., 16 Amp:- 3 Nos. &

(The DBs should be used of same company of MCB / ELCB

to be used) (MCBDB must be erected in line & level with

spirit level and finish the external edge with box cutting

plaster) (Same colour MCB(SP/DP) should be used as same

as MCBDB) [Including Necessary numbering / marking on

box done with red colour radium sticker as per site

requirement and instructions given by EIC on site. Font /

number size given by EIC on site as per requirement]

113 Providing & erecting 240 V MCB double pole switch for 24.00 Each 327.00 Rupees Three Hundred

motor & inductive load (C Curve) having 10 KA breaking Twenty Seven Only

capacity & confirms to IS:8828 in existing box having

following capacity. For 40 Amp. Cat.III.

114 Supplying & fixing box for housing RCCB + MCB 24.00 Each 272.00 Rupees Two Hundred

combination made of 18 SWG sheet steel duly powder Seventy Two Only

coated with gasket, dust & vermin proof bakelite shield two

earthing terminals for following type of RCCB, RCCB + MCB

[a] For 2 pole.

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

115 Providing, erecting, fabricating the M.S. structure as per 50.00 kg 75.11 Rupees Seventy Five And

requirement of site as per structure design Including proper Paise Eleven Only

size approved by EIC of M.S. angles, flats, bars, square

pipe, channels, sections (Tata, Jindal, Asian, JSI Make)

complete with cutting, welding, grinding and finishing duly

painted with Asian/Nerolac make premium quality oil paint

and true care red oxide metal primer,asian paint make with

erection on site as per direction of engineer in charge with

necessary grouting cementing, plastering and finishing

complete. All hole opening of square pipe end must be

closed with M.S plate welding. Payment will be done on KG

as per Actual weight.

116 Supplying & erecting 12 mm thick backelite sheet of 7.00 Sq. Mtr. 2289.00 Rupees Two Thousand

approved make and grade on 25 x 25 x 3 mm red oxide Two Hundred Eighty Nine

painted angle iron frame suitable for fixing ICDP SWITCH Only

and energy meter (contractor shall make approved drawing

of Bakelite sheet To arrange required No. of Energy meter &

ICDP switch-busbar etc. as per Actual space available in

electrical room at site)

117 Providing and erecting metallic vitrified danger notice board 3.00 Each 69.00 Rupees Sixty Nine Only

as per language suggested by engineer incharge for

MEDIUM VOLTAGE installation to be erected as per IS-

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

118 Providing and erecting busbar chamber confirming to IS- 2.00 Rmt 4378.00 Rupees Four Thousand

375 fabricated from 16 GMS sheet dust & vermin proof Three Hundred Seventy

having hinged door with rubber gasket and necessary Eight Only

busbar supports with copper busbar having current density

not more than 1.6 amp/sqmm (Rated current per Cross

Section area) duly wired with colour insulating tape for

phase sequence, three phase & neutral Each equal & one

meter long suitable for following current capacity with

necessary painting mounted on wall or pedestal frame of

required size with necessary incoming and outgoing

connections with proper size of copper strip/wire with lugs as

directed. Suitable for 100 Amp. capacity [make and model

approved by EIC strictly as per tender specification]

119 Providing and Laying of Mains with ISI marked, 1.1 KV 200.00 Mtr. 56.00 Rupees Fifty Six Only

grade electrolyte multi stranded, annealed copper conductor

with heat resistant PVC insulated conforms to IS:694, IEC -

227 erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required. [f] One wire 6.00 sq. mm

120 Providing and Laying of Mains with ISI marked, 1.1 KV 100.00 Each 141.00 Rupees One Hundred

grade electrolyte multi stranded, annealed copper conductor Forty One Only

with heat resistant PVC insulated conforms to IS:694, IEC -

227 erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required. [g] One wire 16.00 sq. mm

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

121 Supplying and erecting approved make Octagonal pole 8.00 Each 6917.00 Rupees Six Thousand

made from HR sheet steel. The pole should be made as Nine Hundred Seventeen

per IS. and shall be coated with hot dip galvanizing as per IS Only

2629/2633/4759, suitable suspend local wind speed with

integral Junction box with Hot Deep Galvanised door

having 2 nos. 180° operated hinges & 2 nos. Ln key

locking with silicon rubber gasket. Consist of terminal

plate of min 6mm Hylam sheet, standard profile 35 mm X

7.5 mm Din-Rail & MCB, Brass stud type terminal and

arrangement for cable termination to be erected on RCC

foundation as per details given by manufacturer and EIC

considering site requirement. Foundation Details: (1)

Grade of RCC 1:2:4, (2) Grade of steel rainforcement of

RCC FE 415, (3) Clear cover to rainforcement 50mm, (4)

Concrete vibrated, (5) use suttering / farma, (6) Hot deep

galvanized average 70 Micron, (7) Detail drawing will be

given by corporation (C) 5 Mtr. Long 70 mm Top X 130 mm

bottom dia, 3 mm thickness with 200 mm X 200 mm X

mm base plate, 4-M16 Bolts and 600 mm long hot deep

galvanized J-Bolt, nuts, washers with 800 mm under ground

and 200 mm above ground level and Foundation in 1:2:4

proportion as per details given by manufacturer and EIC

considering site requirement. Approx Pole weight

kg.(Make:- Bajaj, Valmont, Transrail, Ambica,RR Ispat

Only) (Test certificate to be submitted)

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

122 Providing and erecting Coil type earthing, coil made from 8.00 Each 368.66 Rupees Three Hundred

8 SWG galvanised iron wire with 50 mm OD and 50 turns Sixty Eight And Paise Sixty

(length of turns approx. 200 mm) and having additional Six Only

continuous streight length of 3.00 mtr at open end and

should be connected to earthing bolt and burried in 1.5 mtr

deep specially prepared earth pit complete with salt and

charcoal/coke as required for coil type earthing.(Approx

weight of coil 1.0 to 1.1 Kgs)

123 Providing and Fixing SITC of Outdoor aesthetically designed 9.00 Each 3512.00 Rupees Three Thousand

LED Street Light Luminaire with total consumption of Five Hundred Twelve Only

Max. 45 W with single piece die cast aluminium housing,

high power LED shall be mounted on high quality metal core

PCB with extremely precison designed heat sink complete

with IP66 protection Class with polycarbonate / thoughened

glass cover the fixture should be suitable for pole/bracket

mounting. The fixture to comply both LM79 and LM

guidelines with LED module min. 130 lumen/watt with

toughen Glass L70 at 50,000 hrs, provided with high quality

polycarbonate lenses for better light distribution. The Fixture

Should be able to be Pole Mounted and also bracket

mounted, provided with high quality driver for protection

against high and low Voltage cut Off, opertional for high

amibient and high humid envirnoments, THD of driver

should be less than 10% and P.F > 0.95. Also the Fixture

should meet the following technical criterias Oprating range

Voltage 160 to 270 V, system efficiency >= 110 lm/w, and

total lumens not less then 4950, CCT > 5000K, CRI >

beam angle 120 deg, surge immunity level 4 kv integral &

kv non-integral

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

The Separate Potted driver should have over current, over

voltage protection, short circuit protection so that the fixture

recovers once the fault is removed. In addition to the above

product should be operational in the temperature range of

deg to 50 deg and humidity range of 10% to 90% RH.(Stricly

sample approved by EIC subject to tender specification)

(Note:- The manufacturer/authorized Channel partner of the

manufacturer has to submit 5 yrs free replcement Guarantee

for complete Fixture)(Cool White Color/warm white/natural

white (approved by engineer incharge)

124A Providing & erecting bracket consisting of ISI mark "B" class 7.00 Each 487.00 Rupees Four Hundred

G.I. Pipe 4.2 cm outside diameter complete with suitable G.I. Eighty Seven Only

Sleeve tubing of 2 mm. thick and required size and length

suitable for 76.5 / 80 mm. required size of pole top or pipe in

pipe surface for terrace as per instruction of EIC or wall

bracket as per instruction of EIC having nuts and bolts for

fixing the brackets and having spread of Upto 0.50 mtr.

length with suitable rise as per site condition and suitable

welded stiffner reducer and nipple with check nut complete

painted with one coat of yellow zinc and two coats of

alluminium paint for Single arm bracket suitable for pole or

terrace as per design given by EIC (a) For single arm

bracket. (Jindal / Asian / Tata / Surya Prakash make Only)

(Fabricators:- Bajaj, Valmont, Transrail, Ambica Only) (Test

certificate to be submitted)

124B For Double Arm Bracket . (Jindal / Asian / Tata / Surya 1.00 Each 616.00 Rupees Six Hundred

Prakash make Only) (Fabricators:- Bajaj, Valmont, Transrail, Sixteen Only

Ambica, RR Ispat Only) (Test certificate to be submitted)

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

125 Supplying & erecting approved make SMC press moulded 1.00 Each 890.00 Rupees Eight Hundred

composite FRP. loop-in, loop-out approx. 2mm thick box Ninety Only

complete with Bakelite connector strip 5way(3P+N+E),DIN

rail for mounting mob & hinged doors as per requirement

having locking arrangements with mounting clamp with nuts,

bolts & washers suitable for erection on pole with cable

clamps& earth bolt of following size of box.(A) 300mm x

200mm x 100mm [deep]

126 Providing & erecting XLPE (IS:7098) (I)-88 ISI marked 400.00 Mtr 361.00 Rupees Three Hundred

armoured Copper cable for 1100 volt to be laid 90 cms. Sixty One Only

Under ground or to be laid on wall with suitable G.I. heavy

guage 1.0 mm thick cable clamp or in existing DWC pipe

underground or road crossing or floor of following size of

cables. For 4 core x 4.0 sq.mm.

127 Providing & fixing double compressed heavy duty flange 2.00 Each 43.00 Rupees Forty Three Only

type brass cable gland with rubber ring for P V C insulated

armoured cable complete with outgoing tails, insulating tape

etc. For following size cables. For 2 to 4 core x 2.5/4.0 Sq.

mm (Sigma, MCI, Comet Make Only)

128 Providing and Fixing Of Solderless crimping type Copper 80.00 Each 8.00 Rupees Eight Only

lugs conforming to IS suitable for cable of following size

evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in

an approved manner. [a] 1.5/2.5 to 6 Sq.mm

129 Supplying following size of Light duty “A” Class G.I. Pipe 10.00 Mtr. 171.00 Rupees One Hundred

& erecting as directed by Engineer-in-charge. For 25 mm Seventy One Only

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

130 Providing & Erecting Flexible PVC insulated multistrand 60.00 Mtr. 46.00 Rupees Forty Six Only

multicore 1.1 kv grade ISI marked copper wires of following

size to be erected as directed. 3 core 1.5 sq.mm. PVC

insulated round copper wire ISI mark.

131 Providing & laying HDPE Double walled corrugated pipes 350.00 Mtr. 117.00 Rupees One Hundred

(DWC) (conforming to IS: 16205 (part 24) 2018)) with Seventeen Only

minimum load required of 450N capacity with anti rodent

and ultra violet material properties with necessary

connecting accessories of same material at required depth

to be laid 90 cms. under ground for laying of cable below

ground / road surface for enclosing cable and back filling the

same to make ground as per original. (A) For Outer dia.

mm and Inner dia. 38 mm. ) (Test Certificate to be

132 Providing & Erecting Universal Astro 5 KVA intelligent 1.00 Each 12895.00 Rupees Twelve Thousand

streetlight control system insu with weather proof box for Eight Hundred Ninety Five

outdoor application. (As per specification attached Only

separately) (Make and model approved by EIC)

133 Supplying and fixing radium sticker or Painting the 65.00 Each 2.00 Rupees Two Only

number and words for inventory Identification on erected

fittings / equipment’s or Such accessories (MCBDB, Panel,

Pole, Rack, Earthing, Pump, Door etc.) as may required with

good quality of enamelled paint or fade proof, weather proof,

waterproof high quality vinyl radium sticker for indoor /

outdoor application as directed by engineer in charge. For

one character 50 mm height.

(The colour of sticker / paint should be as per instruction

given by EIC as per site requirement)

Item Description Qty Unit Estimated Rates Amount

No. Figure Words

134 Dismantling the existing light, fan, bell, , independent plug 500.00 Each 1.00 Rupee One Only

point, wiring with mains of all types along with accessories

etc. complete and handed over to dept.

135 Dismantling the existing switchgears, DB and Busbar of any 50.00 Each 7.00 Rupees Seven Only

size complete with / without board or angle iron frame.

136 Dismantling the existing ceiling fan / exhaust fan / cabin fan / 51.00 Each 9.00 Rupees Nine Only

bracket fan complete with accessories, G.I. down rod, frame

etc. and making the site clear.

Total Amounts Rs.

Total Amounts Rs.

Contractor's Signature Junagadh