Minor bridge, approach road, additional aapproach road and protective works on Bahalla river between Tanda (Marghati) to Karkhadi under district Rampur. (3rd call)

Amount

Earth work in excavation for foundation of structure by mechanical means as per drawings and clause 304 of MORT&H specifications (2001)(placing for well curb) SOR 251 (i/c of all taxes but Excluding GST)

Providing and laying of cutting edge of mild steel weighing 150 kg per meter of well foundation as per drawings and clause 1200 & 1900 of MORT&H Specifications (2001) . (i/c of all taxes but Excluding GST)

RCC work in M-30 in well curb with cement, aproved coarse sand & 2cm. Gauge well graded grit including nece-sarry shuttring, placing and fixing of reinforcement including its binding with wire but excluding cost of reinforcement and also including supply of all materials, labours T&P etc. required for proper completion of the work. (i/c of all taxes but Excluding GST)

RCC work in M-30 in well steining with cement aproved coarse sand & 2cm. Gauge well graded grit including nece-sarry shuttring, placing and fixing of reinforcement including its binding with wire but excluding cost of reinforcement and also including supply of all materials, labours T&P etc. required for proper completion of the work. (i/c of all taxes but Excluding GST)

Sinking of 6 m external diameter well (other than pneumatic method of sinking) through all types of strata namely sandy soil,clayey soil and rock as shown against each case ,cpmplete as per drawings and clause 1200 of MORT&H specification (2001).Depth of sinking reckoned from bed level, depth below bed level up to 3.0M (i/c of all taxes but Excluding GST)

depth below 3.00 to 10 M

Beyond 10.00 M to 16.00 M

M 25 grade plain cement concrete with 10 per cent extra cement in well foundation as per drawings and clause 1200,1500 & 1700 of MORT&H Specifications (2001) in bottom plug. (i/c of all taxes but Excluding GST)

M 25 grade plain cement concrete in well foundation as per drawings and clause 1200,1500 & 1700 of MORT&H Specifications (2001) in intermediate plug. (i/c of all taxes but Excluding GST)

Sand filling in wells complete as per drawing and clause 1207 of MORT&H Specifications (2001) (i/c of all taxes but Excluding GST)

M30 grade Reinforced cement concrete in well foundation as per drawings and clause 1200,1500 & 1700 of MORT&H Specifications (2001) in well cap. (i/c of all taxes but Excluding GST)

M 30 grade Reinforced cement concrete in substructure as per drawing as clause 1200 ,1500 & 1700 of MORTH Specifications (2001) in piers (i/c of all taxes but Excluding GST)

M 30 grade Reinforced cement concrete in substructure as per drawing and clause 1200 ,1500 & 1700 of MORTH Specifications (2001) in piers caps (i/c of all taxes but Excluding GST)

M 30 grade Reinforced cement concrete in substructure as per drawing and clause 1200 ,1500 & 1700 of MORTH Specifications (2001) abutment columns (i/c of all taxes but Excluding GST)

M 30 grade Reinforced cement concrete in substructure as per drawing and clause 1200 ,1500 & 1700 of MORTH Specifications (2001) abutment top beams (i/c of all taxes but Excluding GST)

M 30 grade Reinforced cement concrete in substructure as per drawing and clause 1200 ,1500 & 1700 of MORTH Specifications (2001) in back walls (i/c of all taxes but Excluding GST)

M 30 grade Reinforced cement concrete in substructure as per drawing and clause 1200 ,1500 & 1700 of MORTH Specifications (2001) in wing walls (i/c of all taxes but Excluding GST)

RCC M-35 in superstructure with cement approved coarse sand & 2cm gauge well graded grit including nece-sary shuttring placing and fixing of reinforcement including its binding with wire but excluding cost of reinforcement and also including supply of all material labours T&P etc required for porper completion of wortk. as per drawings and clause 1500 &1600 1700 of MORT&H specifications (2001) (i/c of all taxes but Excluding GST)

Providing and laying cement concrete wearing coat M-30 Grade including reinforcement complete as per drawing and technical specification. (i/c of all taxes but Excluding GST)

HYSD steel or iron work in well steining well cats, abutment and their caps, slabs, curvs etc, brought to required shape including cutting, bending & also including cost of cecessary reinfocement for proper completion of the work. (i/c of all taxes but Excluding GST)

M 30 grade renforced cement concrete approach slab excluding reinforcement as per drawings and clause 1200,1500 & 1700 of MORT&H Specifications (2001) (i/c of all taxes but Excluding GST)

M 15 ordinary grade plain cement concrete leveling course below approach slabs per drawings and clause 1500, 1600, 1700 & 2700 and MORT&H Specifications (2001) (i/c of all taxes but Excluding GST)

PVC pipes (working pressure 4 kg / cm 2 ) Single socketed pipe 110 mm dia (i/c of all taxes but Excluding GST)

Back filling behind abutment, wing wall and return wall with 40mm Stone ballast. complete as per drawing and technical specifications (i/c of all taxes but Excluding GST)

Supply, fitting and fixing in positions true to line and level sixe elastomeric bearing comforming to IRC 83 (part II) section ix compelete with all accessories including all labour material T & P and testing charges required for the porper compeletion of the work as per drawing and Morth specifications (2001) (i/c of all taxes but Excluding GST)

Providing and laying of a strip seal expansions joint catering to maximum horizontal movement up to 70mm compelete as per approved drawing and standard specification to be installed by the manufacturer/s supplier or their aurthorized representative ensuring compliance to the manufacturer,s instructions for installation (i/c of all taxes but Excluding GST)

Drainage Spouts complete as per drawing and Technical specification (i/c of all taxes but Excluding GST)

Construction of embankment with apporved material obtained from borrow pits with attl ifts upto 1.5m transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300.1 and 300.2 with a lead upto 1000m as per Tecnical Specification Clause 301.5 (i/c of all taxes but Excluding GST)

Granular Sub-base with Well Graded material (Table 400.1) Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader/tractor mounted appropriate equipment on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specificatin Clause 401. (i) For Grading I Material (i/c of all taxes but Excluding GST)

Water Bound Macadam Sub-base/Base. (WBM Grading 2) Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405 (By Manual Means). (i/c of all taxes but Excluding GST)

Water Bound Macadam Sub-base/Base. (WBM Grading 3) Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405 (By Manual Means). (i/c of all taxes but Excluding GST)

Brick edging on both sides of the road of first class (M-150) brick on edge laid with mud mortar including labour and supply of bricks finished to the required templete and in proper aligment and also including dressing and ramming the excavated earth as directed by the Engineer-in-charge.(SI. No.- 765) (i/c of all taxes but Excluding GST)

Providing and applying primer coat of Low Porosity with Bitumen emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at rate of 0.70 Kg/Sqm using mechanical means as per Technical Specification Clause 502. Including Bitumen (i/c of all taxes but Excluding GST)

Providing and applying tack coat with VG-10 using bitumen distributor at the rate of 0.30 kg per sqm on the prepared granular surfaces treated with primer/Bituminous surface as per Technical Specification Clause 503. Including Bitumen (i/c of all taxes but Excluding GST)

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using VG-10 to required line, grade and level to serve as wearing course on a previously prepared base by manual means, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades as per Technical Specification Clause 508 ( By Manual Means) Including Bitumen (i/c of all taxes but Excluding GST)

Providing and laying seal coat by manual means with VG-10 sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 ( By Manual Means) Including Bitumen (i/c of all taxes but Excluding GST)

Providing and laying filter material undermeath pitching in slopes complete as per drawing and technical specification. (i/c of all taxes but Excluding GST)

Providing and laying pitching on slopes laid over prepared filter media including boulder pron laid dry in front of toe of embankment complete as per drawing and technical specification (i/c of all taxes but Excluding GST)

Concrete with 4cm(1½"). Gauge Stone ballast, coarse sand and cement in the proportion of 8:4:1 in foundation and under floor, including supply of all material Iabour and T&P etc.required for proper completion of the work.281 (i/c of all taxes but Excluding GST)

First class brick work in 1:3 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. (i/c of all taxes but Excluding GST)

12 mm thick plaster with cement and approved coarse sand in 1:3 over brick work minimum thickness not to be less than 3/8" (10 mm) thick including supply of all materials, labour and T&P etc. required for proper completion of the work. 583 (i/c of all taxes but Excluding GST)

Struck pointing with cement mortar consisting of one part cement and 2 part of fine sand of 1.25 F.M. on brick work including supply of all material, labour and T & P etc. required for proper completionof the work. (S.I.No. 574) (i/c of all taxes but Excluding GST)

Supplly, laying and fixing of 600mm dia R.C.C. Hume Pipe NP-3 with coller complete (i/c of all taxes but Excluding GST)

R H Construction