Machinery Equipment

Machinery :

Injector cleaning unit: 1.Main supply :220V AC,Single phase,50Hz also operatable on 12V DC 2. Ultrasonic cleaning power:Minimum 80W 3. Stimulated RPM range-10~9900rpm;step:10rpm 4. Time range:1~9999 sec 5. Fuel tank capacity: Minimum 500 ML 6. SS tank with Lid SS stand 7. 3 Ltr cleaning chemical for injector 8. Adaptors and couplers to facilitate cleaning on injectors on vehicle. 9. Ultrasonic cleaning. 10. Flow analysis & spray pattern test. 11.Leakage test. 12.Injecting flow test. 13.Auto programing mode. 14.Ultrasonic test with timer.

Back pull out type centrifugal pump: Should have Hydraulic design . Pumps shouled be energy efficient pumps, Back pull-out design for easy maintenance and avoid dismantling of pipeline. 1. Capacity : Up to 25 LPM 2. Total head:Up to 40 Meters 3.Pump speed:1450 RPM 4.Electric Motor:0.5HP Sealing arrangement gland mechanical seal.

Diesel engine 2 stroke vertical (up to 10 KW/ ISHP): 1. The diesel engines with fuel injection system. The model which should give a complete idea of diesel engine and other actions like starting and speed up. 2. Type : Vertical diesel engine 2 stroke 3. Starting system:Self starter 4.Power rating: Up to 10 Kw/10 HP. 5. No. of cylinder: Minimum 2 6. Cooling system: Air/Water cooled 7. Fuel tank capacity:10 to 20 liters. 8. Suitable battery for run the engine. 9. Radiator. 10. Air cleaner. 11. Water pump. 12. The assembly should be provided with all standard accessories. 13. Whole assembly should be mounted on sturdy iron frame. 14. Compact size for installation. 15.High grade CI casting body. 16. Operating manual should be provided.

Diesel Engine 4 stroke vertical (up to about 10 KW/ISHP): 1. The diesel engines with fuel injection system. The model which should give a complete idea of diesel engine and other actions like starting and speed up. 2. Type : Vertical diesel engine 4 stroke 3. Starting system:Self starter 4.Power rating: Up to 10 Kw/15 HP. 5. No. of cylinder: Minimum 2 6. Cooling system: Air/Water cooled 7. Fuel tank capacity:10 to 20 liters. 8. Suitable battery for run the engine. 9. Radiator. 10. Air cleaner. 11. Water pump. 12. The assembly should be provided with all standard accessories. 13. Whole assembly should be mounted on sturdy iron frame. 14. Compact size for installation. 15.High grade CI casting body. 16. Operating manual should be provided.

Diesel Engine Driven portable pump set: 1.The diesel engines with fuel injection system. The model which will give a complete idea of diesel engine and other actions like starting and speed up.2. Diesel engine fitted with pump.3. Type: Compression lgnition diesel engine.4. Starting system: Self starter.5. Engine type: Single cylinder.6. Stroke: Four stroke cycle.7. Engine power rating:5 HP8. Pump type: Centrifugal pump.9. Discharge range: 900-1200 LPM10. Suitable battery for run the engine.11. The assembly should be provided with all standard accessories.12. Whole assemble should be mounted on iron sturdy iron frame.13. Compact size for installation.14.High grade Ci casting body.15. Operating manual should be provided.

Diesel Engine 3.5 KW /4.5 HP fitted with pump: 1.The diesel engines with fuel injection system. The model which will give a complete idea of diesel engine and other actions like starting and speed up. 2. Diesel engine fitted with pump. 3. Type: Compression lgnition diesel engine. 4. Starting system: Self starter. 5. Engine type: Single cylinder. 6. Stroke: Four stroke cycle. 7. Engine power rating: 3.5 KW/4.5 HP 8. Pump type: Centrifugal pump. 9. Pump head range: 7-18 Meter. 10. Suitable battery for run the engine. 11. Radiator. 12. Water pump. 13. Air cleaner. 14. The assembly should be provided with all standard accessories. 15. Whole assembly should be mounted on iron sturdy iron frame. 16. Compact size for installation. 17.High grade CI casting body. 18. Operating manual should be provided.

Trolley type portable air compressor single cylinder with 45 liters capacity Air tank, along with accessories & with working pressure 6.5 kg/sq cm: 1. Supply : 230VAC,50 Hz 2. Power : 1HP 3. Motor : Foot Mounted 4. Air Tank : minimum 45 Liters 5. Type : Reciprocating type 6. pressure gauge: 0-10kg/cm2 7. Working pressure: Min. 6.5 Kg/sq. cm with pressure switch,safety valve and drain plug

Cylindrical grinder: 1. Max. grinding length : 300 mm 2. Height of centre : 130 mm 3. Max. distance between centers : 340 mm With all attachments 4. Max. Swing over table : 250mm 5. Max grinding dimeter : 200mm 6. work spindal speed : 3 7. size of grinding wheel : 355x25x127mm 8. rpm of grinding wheel : 1650-2200 9. Max.diaof hole for grinding : 15-240mm 10. wheel head motor : 1440RPM/3hp

Pneumatic Trainer Kit, each consisting of the following matching components and accessories: I. Single acting cylinder Max. stroke length 50 mm, Bore dia 20 mm 1 No II. Double acting cylinder Max. stroke length 100 mm, Bore dia 20 mm, magnetic type 1 No III. 3/2-way valve manually-actuated, Normally Closed 2 Nos IV. 3/2-way valve pneumatically-actuated, spring return 1 No V. One-way flow control valve 2 Nos VI. 5/2-way valve with manually-operated switch 1 No VII. 5/2-way valve pneumatically-actuated, spring return 1 No VIII. VIII. 5/2-way pneumatic actuated valve double pilot 1 No IX. 3/2-position palm operated valve: 1 No. X.3/2-way roller lever valve direct actuation normally closed: 2 Nos. XI. Shuttle valve (OR) 1 No XI. Two-pressure valve (AND) 01 no XII. Air filter regulator:1 No. XIII. Pressure gauge 0-16 bar: 1 Nos XVI. Manifold with self-closing NRV, 6-way: 1 No XVII.5/2 way roller lever valvw direct actuation normally closed:1 Nos.XVIII. Proximity sensor:4 Nos.XIX. Exhaust silencer:5 No.XX. Pushbutton station for electrical signal input with 3 illuminated momentary-contact switches (1 NO + 1 NC) and 1 illuminated maintained-contact switch illuminated maintained-contact switch(1 NO + 1 NC), Contact load 2A 1 No XV. Relay station with 3 ralays each with 4 contact sets (3NO+1NC or Change-over type), 5 A 1 No XVI. 3/2-way single solenoid valve with LED 1 No XVII. 5/2-way single solenoid valve with manual override and LED 1 No XVIII. 5/2-way double solenoid valve with manual override and LED 1 No XIX. Power supply unit, Input voltage 85 – 265 V AC, Output voltage: 24 V DC, Output current: max. 4.5 A, short-circuit-proof. 1 No XX. PLC with Ethernet communication:No. of Input"14 Nos.No. of Output:10 Nos.Operating voltage: 24VDCProgramming cable between PLC and PCType: Ethernet cableLength: 3 Mtr.Software tool for Programming PLC Programing through PCAll above components should be in working condition to understand design and working principal of pneumatic components and circuits.Stimulation software should be provided to understand working principal of pneumatic components, its symbols and circuits.3. Pneumatic workstation with 40 square mm aluminium profile legs, wooden work surface and onne pededestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide:(1) Work table- Size L1200mmXW900mmXH900mm with four castor wheels including two lockable wheels at the front side. Aluminium profile leg 40 mmsq wooden work surface. One pedestal drawer & five drawers with handle and locks. Vertical profile plate Anodized Aluminium 1100*700mm with carriers mounting frames and mounting accessories (To be fitted onto the pneumatic workstation).(2)Drawer-Size(approx)-L 460 mm*W 495mm*H 158 mm each and overall size of drawer unit.(3)Drawer slide height 85 mm.4. Carrier for mounting components , such as PB & relay boxes.5. List of cut section pneumatic components:* Single acting cylinder Max. stroke length 50mm, Bore dia 20 mm;1 No.* Double acting cylinder Max. stroke length 100 mm, Bore dia 20 mm, magnetic type: 1 No.* 3/2 way valve manually actuated normally closed:1 Nos.*3/2 way valve pneumatically actuated, spring return:1 No.*One way flow control valve: 1 No.*5/2 way valve with manually operated switcj:1 No.* 5/2 way valve pneumatically actuated, spring return:1 No.*5/2 way pneumatic actuated valve double pilot:1 No.*3/2 position palm operated valve:1 No.*3/2 way roller lever valve direct actuation normally closed:1 Nos.*5/2 way roller lever valve direct actuation normally closed:1 Nos.* Shuttle valve(OR):1 No.* Two pressure valve(AND):1 No.*Pressure gauge:1 Nos.* Manifold 6 way:1 No.*3/2 way single solenoid valve with LED:1 No.* 5/2 way single solenoid valve with LED:1 No.*5/2 way double solenoid valve with manual override and LED: 1 No.Pneumatic Trainer with Tool kit to fitting of pneumatic components, & Assorted PU pipe should be provided with suitable size and length to conduct the experiments.Pneumatic workstation with 40 square mm aluminium profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers,each with legs and individual locks, on metallic full panel drawer slide:Work table- Size L1200 mmXW900mmXH900mm,with four castor wheels including two lockable wheels at the front side, drawer size L460 mmxW495mm xH158mm each, and overall size of drawer unit L470mmxW495mmxH825mm and Drawer slide height 85mm.Profile plate, Anodised Aluminium 1100x700 mm, with carriers, mounting frames and mounting accessories (Tobe fitted onto the pneumatic workstation) 1 sets

LAKSHMI INDUSTRIES (REGD.)

Technozon Solutions

Kitek Technologies Pvt. Ltd

Vee Kay Systems

Rohit Uppal

Mars Edpal Instruments Pvt Ltd

BANSAL INDUSTRIAL CORPORATION

quality industrial corporation

Technology Exchange Services Pvt. Ltd.

Shreenath Enterprise

IMAX ASSOCIATES

MDT INTERNATIONAL

Vee Kay Systems

Technozon Solutions

Rohit Uppal

BANSAL INDUSTRIAL CORPORATION