PERIODICAL SERVICES TO CERTAIN OTM AND SHEDS INSIDE DEPOT AREA AT ARMY AREA BANAR

Amount

M&L for Preparation of old decorated surfaces of walls (plastered or unplastered) including cornices, pillasters etc by brooming down or wire brushing removing dust, dirt etc scrapping smoke, soot, moulds, moss and efflorecent salts, removing oil and greasy spots and applying one coat of white wash on wall leaving permises clean etc complete all as specified.

M&L for Preparation of old decorated surfaces of ceiling (plastered or unplastered) including cornices, pillasters etc by brooming down or wire brushing removing dust, dirt etc scrapping smoke, soot, moulds, moss and efflorecent salts, removing oil and greasy spots and applying one coat of white wash on ceiling leaving permises clean etc complete all as specified.

M&L for Preparation of old decorated surfaces of walls (plastered or unplastered) including cornices, pillasters etc by brooming down or wire brushing removing dust, dirt etc scrapping smoke, soot, moulds, moss and efflorecent salts, removing oil and greasy spots and applying one coat of distemper oil emulsion (white or tint as directed) on walls using roller leaving permises clean etc complete all as specified. Note : (i) The colour shall be machine mixed of approved shade prior to start the work at site, no mixing of colour shall be allowed at site.

M&L for Preparation of old decorated surfaces of Ceiling (plastered or unplastered) including cornices, pillasters etc by brooming down or wire brushing removing dust, dirt etc scrapping smoke, soot, moulds, moss and efflorecent salts, removing oil and greasy spots and applying one coat of distemper oil emulsion (white or tint as directed) on walls with roller leaving permises clean etc complete all as specified. Note : (i) The colour shall be machine mixed of approved shade prior to start the work at site, no mixing of colour shall be allowed at site.

M&L for Preparation of old painted surfaces of (wall/ceiling) any description wood, steel, iron , concrete, brick, stone etc. (Plastered or unplastered) including cornices, pillasters etc by brooming down or wire brushing removing dust, dirt etc scrapping smoke, soot, moulds, moss and efflorecent salts, removing oil and greasy spots and applying one coat of fire resisting paint surface with roller complete Upto the ht of 6.5Mtr all as specified. Note : (i) The colour shall be machine mixed of approved shade prior to start the work at site, no mixing of colour shall be allowed at site.

M&L for Preparation of old decorated surfaces of walls (plastered or unplastered) including cornices, pillasters etc by brooming down or wire brushing removing dust, dirt etc scrapping smoke, soot, moulds, moss and efflorecent salts, removing oil and greasy spots and applying one coat of cement base paint on external wall surface with brush/roller complete upto the 7.00Mtr of ht all as specified. Note : (i) The colour shall be machine mixed of approved shade prior to start the work at site, no mixing of colour shall be allowed at site.

All as per item no 6.00 above including chajja roof projection on roof and and wall etc above and applying one coat of cement base paint in camouflaging pattern upto the 7 Mtr height (any tint as directed) complete all as specified. Note : (i) The colour shall be machine mixed of approved shade prior to start the work at site, no mixing of colour shall be allowed at site.

M&L for Preparation of old decorated surfaces of walls (plastered or unplastered) including cornices, pillasters etc by brooming down or wire brushing removing dust, dirt etc scrapping smoke, soot, moulds, moss and efflorecent salts, removing oil and greasy spots and applying one coat of colour wash on external wall surface with brush complete all as specified.

Complete removal of existing treatment on old wall surface (plastered surface) including cornice,plaster etc by scrapping with mechanical wall sander (having mechanical vacuum mechanism), sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc, and applying two coats of distemper oil emulsion (white or tint as directed) on prepared surfaces of walls and finished the surface even and smooth complete all as specified Note : (i) The colour shall be machine mixed of approved shade prior to start the work at site, no mixing of colour shall be allowed at site.

M&L for Preparation of old decorated surfaces of walls (plastered or unplastered) including cornices, pillasters etc by brooming down or wire brushing removing dust, dirt etc scrapping smoke, soot, moulds, moss and efflorecent salts, removing oil and greasy spots and Finishing walls with Acrylic Smooth exterior paint of required shade : old work (one or more coat applied @ 0.84 ltr/10 sqm over and including priming coat of exterior primer applied @ 1.10 kg/10 sqm) complete all as specified . Note : (i) The colour shall be machine mixed of approved shade prior to start the work at site, no mixing of colour shall be allowed at site.

Preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint of ordinary tint etc complete all as specified.

Preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint of ordinary tint etc complete all as specified.

Material and labour for writing letters or figures (Block, Romman, Italic or Indian) n exc 30 cm high including stop, short lines, dashes, hyphens, brackets etc with synthetic enamel paint complete all as specified.

Taking down cement plaster on walls of any description including racking out joints, hacking for key scrubbing down with water etc complete all as specified.

M&L for rendering 15mm thick on other than fair faces of stone/brick surface of wall in CM 1:6 and finished even and smooth (without using extra cement) complete all as specified.

M&L for two coats of oil bound distemper on newly plastered walls over a one coat of 1mm thick JK/Birla wall putty over plastered surface to prepare the surface even and smooth and priming plastered and other surfaces with alkali resistant priming paint including preparation of surfaces all as specified.

M&L for 10 mm thick rendering in CM 1:3 on concrete surface as in ceiling and finishing the surface even and smooth without using extra cement complete all as specified.

M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying three coats of white wash complete all as specified.

Material and labour for 15mm thick rendering in two layer, 5mm thick rendering in CM 1:4 mixed with WPC over 10mm thick rendering in CM 1:4 on stone masonry/concrete surfaces/roof projections/chajjas upto the height 7 Mtr complete all as specified .

Material and labour for 15mm thick rendering in CM 1:4 mixed with WPC on stone masonry/concrete surfaces and Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exc 15 cm but n exc 30 cm in width or girth; including cutting to edges, all mitres and stopped ends etc complete upto the height 7 Mtr all as specified.

Material and labour for 15mm thick rendering in CM 1:4 mixed with WPC on stone masonry/concrete surfaces and Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work n exc 15 cm in width or girth; including cutting to edges, all mitres and stopped ends etc upto the height 7 Mtr complete all as specified.

Material and labour for preparation of newly plastered surface of walls and applying two coats of cement base paint over one coat of alkali resistance primer complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified.

S&F sheet glass 4 mm thick, ordinary quality and glazing with oil putty or wooden beads supplied with shutters in square n.exc 0.5 sqm in each pane complete all as specified.

S&F sheet glass 4 mm thick, figured glass, pin headed type and glazing with oil putty or wooden beads supplied with shutters in square n.exc 0.5 sqm in each pane complete all as specified.

Bhawani Enterprises

AJEET ENTERPRISES

M.A. MUNSHI AND CO.

DIWAKAR CONSTRUCTION CO.

NISHA CONSTRUCTIONS