Augmentation and improvement of various GWSS in GP Panar in Tehsil Dadahu Distt. Sirmour HP

Amount

Excavation in foundation & plinth in earth work in all kinds of soil containing spade work, blasting work, jumper work including decomposed soft and hard rock etc. with all lifts stacking the excavated soil not mote than 3 m trs clear from the edge of the excavation and then returning the stacked soil in 15cm layer when required into plinth side of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth with in all leads, lifts complete in all respects and as directed by the Engineer Incharge.

Excavation in foundation, trenches etc. in earth work in all kinds of soil containing spade work, blasting work, jumper work including decomposed soft and hard rock etc. with all lifts stacking the excavated soil not mote than 3 m trs clear from the edge of the excavation and then returning the stacked soil in 15cm layer when required into plinth side of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth with in all leads, lifts complete in all respects and as directed by the Engineer Incharge.

Providing and laying cement concrete 1:6:12 (1cement:6app.sand:12app.graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth in all height and depth including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Squared Rubble masonary coursed with hard stone of approved quality of foundation and plinth including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing and laying DPC 38mm thick cement concrete 1:2:4(1cement:2app.sand: 4app.graded stone agg.12.5mm nominal size and curing complete.I/c all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Applying coat of hot bitumen(mexphlat 80/100 or equipment using 1.70Kg per square metre on damp proof, course after cleaning the surface with a cloth lightly socked in Kerosine oil, including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Brick work using common burnt clay building bricks ( II ) class including racking out joint in cement mortar 1:4(1cement :4sand) extra for super structure above plinth level and up to floor two level including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30X30X5mm . So as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for insitu-reinforced concrete and plain concrete work in, including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

I) Flat surface such as soffits of suspended floors, roofs,landings and the like floors etc. upto 200mm in thickness.

II) Vertival surface such as walls ( Any Thickness ) partition and like including attached.

III ) Edge of slabs.

Providing and laying reinforced cement concrete work 1:2:4(1cement:2app.sand:4app. graded stone aggregate 20mm nominal size and curing complete excluding cost of form work and reinforcement for RCC work in suspended floors roofs, landings shelves and their supports balconies beams,girders bressumers and cantilevers upto floor two level in all height and depth, including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing tor steel reinforcement for RCC work including banding, binding and placing in polsition complete upto floor two lelvel including all leads, and carriage of material at site and as directed by the Engineer Incharge.including cost of binding wires.

20mm cement plaster in single coat on rough side of brick /stone masonary for interior plastering upto floor two level including arrises, internal rounded angles,chamfers and/or rounded angles not exceeding 80-mm in girth and finished even and smooth in cement mortar 1:6 (1cement:6app.sand) including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

6mm cement plaster in ceiling in cement mortar 1:3(1cement:3sand) including all leads lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing wood work in frames and door , windows clerestory windows and other frames wrought framed and fixed in position Sal wood, including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including bright finished /black enamelled iron butt hings with necessary screws 40mm thick secound class Deodar wood.including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Applying priming two coat of wood preservative on new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting: ready mixed paint brushing wood primer pink,including all leads, leads, and carriage of material at site and as directed by the Engineer Incharge.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting: ready mixed paint brushing wood primer pink,including all leads, leads, and carriage of material at site and as directed by the Engineer Incharge.

Painting two coats(excluding priming coat) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of all dirt dust and other foreign matter, sand papering and stopping with paint other than white , including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

White washing with lime on undecorated wall surfaces(two coats) to give an even shade including thoroughly brooming the surface to remove all dirt, dust mortar dirt and other foreign matter.including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Cement concrete flooring 1:2:4(1cement:2app.sand:4app.graded stone aggregate 20 mm nominal size) laid in one layer finished with floating coat of neat cement 40mm thick including all lead, lifts and arriage of material at site and as directed by the Engineer Incharge.

Providing 40X3mm flat iron hold fast 40cm long including fixing to frame with 10mm dia meter bolts, nuts and wooden plug and embedding in cement concrete block 30X10X15 cm 1:3:6(1cement:3sand:6app.graded stone3 agg. 20mm nominal size. including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing and fixing MS tower bolts (Barrel type) 250X10mm with necessary screws complete including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing and fixing MS sliding door bolts 250X16mm with nuts and screws complete including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing and fixing MS handles 100mm with necessary screws at complete, including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing and fixing PVC pipe 80mm dia from P or S trap to soak pit, weep hole in soak pit site , incuding all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing and fixing P or S trap including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing and fixing toilet sheet with CP brass hings (white ) , incuding all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing and laying cement concrete 1:4:8 (1cement:4app.sand:8app. graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in foundation and plinth in all height and depth including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing and laying cement concrete 1:1 ½:3(1cement:1½app.sand:3app.graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work in foundation and plinth, including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge..

Providing and laying cement concrete 1:2:4 (1cement:2app.sand:4app.graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work in foundation and plinth, including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge..

Providing and laying cement concrete 1:2:4(1cement:2app.sand:4app.graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work in walls including attached buttresses, pilaster of their caps & bases and their caps and bases and string courses etc upto floor two level in all height and depth. including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing and laying cement concrete 1:1 ½:3(1cement:1½app.sand:3app.graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforced for reinfoece concrete work in wall(any thickness not less than 0.1m thickness) attahced pillaster buttresses, plinth and string courses etc. from top of foundation level upto floor two level,including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge..

Providing and laying reinforced cement concrete work 1:2:4 (1cement:2app.sand:4app. graded stone aggregate 20mm nominal size and curing complete excluding cost of form work and reinforcement for RCC work in suspended floors roofs, landings shelves and their supports balconies beams,girders bressumers and cantilevers upto floor two level in all height and depth, including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Supplying and fixing cast iron cover with frames for man holes of size 500mm intenal dia metre C.I. Cover (Medium) duty the weight of cover to be not less than 38Kg (weight of cover 23 Kgs and weight of frame 15 kgs). I/c all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Steel work welded in built up sections , trusses and framed work including cutting, hoisting, fixing in position and applying and priming coat of red lead paint in gratings, framed guard bars, ladders, railings , brackets and similar work. including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing and placing in horizontal layer filtering media duly graded ,screened, washed and cleanned as specified by the Engineer Inchargte including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Broken Stone

Bajri 20 MM to 25 MM

Bajri 6 MM to 20 MM

Coarse Sand

Fine Sand

Wire crates of G.I. Wire filled with boulder with square cut faces aginst the wire(wire crates to be measured and paid for seperately) including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Wire crates made of G.I. Wire filled with boulder with squared cut faces against the wire( boulder filling to be mesured and paid for seperately), 5mm thick SWG-6, 15cmX15cm mesh including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing and fixing perforated GMS pipe ( Light Garade ) 50 MM Dia including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

PREM SINGH

OM PARKASH SHARMA