Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.1 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | Rejected-Technical | - | Rejected-Technical L2 |
| Sl No | Description | Qty | Unit | ONESQ BUILDERS AND DEVELOPERS PRIVATE LIMITED L2 | GREGORY.C L1 |
|---|---|---|---|---|---|
| 1.00Anganawadi no 22 | |||||
| 1.00 | OD492509/2025-2026:Labour engaged for maintenance for doors and windows | 2 | no | 368 ₹736 | 366 ₹732 Lowest |
| 1.00 | OD492523/2025-2026:Supplying and fixing 6inch dia PVC rain water gutter square section including fitting with 32mmx5mm MS flat supporters etc. complete | 26.3 | metre | 405.6 ₹10,667.28 | 404 ₹10,625.2 Lowest |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 148.95 | kg | 174.4 ₹25,976.88 | 173 ₹25,768.35 Lowest |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 8.2 | sqm | 785.3 ₹6,439.46 | 783 ₹6,420.6 Lowest |
| 1.00 | 14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand) | 6.84 | sqm | 540.6 ₹3,697.7 | 539 ₹3,686.76 Lowest |
| 1.01 | 13.111.1:Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface | 267.7 | sqm | 130.5 ₹34,934.85 | 130 ₹34,801 Lowest |
| 1.01 | 13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work | 12.3 | sqm | 101.2 ₹1,244.76 | 100 ₹1,230 Lowest |
| 1.01 | OD495305/2025-2026:Artistic pictures wall painting with acrylic emulsion paint of approved brand and manufacture
with different co lour,shades as per requirement two or more scoats on new work | 25.25 | sqm | 554.8 ₹14,008.7 | 553 ₹13,963.25 Lowest |
| 1.01 | OD492505/2025-2026:Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm
in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift
up to 1.5 m as per direction of site Engineer-in-charge.(Modified Spec 50.2.26.1) | 17.56 | cum | 1,189.7 ₹20,895.89 | 1,186 ₹20,830.9 Lowest |
Tender Value
₹3.4 L
EMD Value
₹8,398
Closing Date
5 Mar 2026, 6:00 pmClosed
Assistant Engineer
Office of Assistant Engineer Punnapra south GP
Annual Plan-Punnapra South -PR NO 207/25- 26-Maintenance of Various Anganawadies
2026_LSGD_840620_4
07T/AE/LSGD/PSGP
Open Tender
Civil Works - Buildings
Item Rate
180 days
punnapra south gp
Please refer Tender documents.
7 documents required · 7 mandatory
₹745
Yes
₹8,398
Yes
18 Apr 2026
26 Feb 2026
7 Mar 2026
26 Feb 2026
5 Mar 2026
26 Feb 2026
Anganawadi no 22
OD492509/2025-2026:Labour engaged for maintenance for doors and windows
OD492523/2025-2026:Supplying and fixing 6inch dia PVC rain water gutter square section including fitting with 32mmx5mm MS flat supporters etc. complete
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)
13.111.1:Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface
13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work
OD495305/2025-2026:Artistic pictures wall painting with acrylic emulsion paint of approved brand and manufacture with different co lour,shades as per requirement two or more scoats on new work
OD492505/2025-2026:Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge.(Modified Spec 50.2.26.1)
OD492506/2025-2026:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge
50.9.12.1:Providing and fixing Thomson Multi wood board or equivalent make, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) as per the direction of site Engineer-in-charge.
Anganawadi no 111
OD493452/2025-2026:Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge.(Modified Spec 50.2.26.1)
OD493453/2025-2026:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge
Anganawadi no 32
OD493466/2025-2026:Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge.(Modified Spec 50.2.26.1)
OD493467/2025-2026:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1417268.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.30 MB
sbd.pdf
Tender Documents • 1.79 MB
BOQ_1417268.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .