ADDITION / ALTERATION TO OTM ACCN AT SECTOR - 27, GANDHINAGAR UNDER GE (AF) CHILODA

Amount

Supply, installation and testing for electric driven single phase HI wall Digital Inverter 4 -in-1 convertible 1.5 TR 5 star rating split AC, eco frendly refrigerant with indoor & outdoor unit with copper condenser, cordless remote , 2 way air flow, anti-dust & anti-bacterial air filter, suitable size copper pipe upto 10 feet, mounting stand etc complete all as specified and directed.

Supply , installation and testing for electric driven single phase HI wall Digital Inverter 4 -in-1 convertible 2.0 TR 5 star rating split AC, eco frendly refrigerant with indoor & outdoor unit with copper condenser, cordless remote , 2 way air flow, anti-dust & anti-bacterial air filter, suitable size copper pipe upto 10 feet, mounting stand etc complete all as specified and directed.

Supply & Fixing for wall mounted voltage stabilizer 12 Amps capacity single phase, naturally air cooled with volt meter, for automatic Low & High Voltage cut-off protection for input voltage of 150 V to 280V and output voltage stabilized between 230 V with accuracy of 2.5% fixing voltage stabilizer to wall complete all as specified and directed.

Supply & Fixing for wall mounted voltage stabilizer 15 Amps capacity single phase, naturally air cooled with volt meter, for automatic Low & High Voltage cut-off protection for input voltage of 150 V to 280V and output voltage stabilized between 230 V with accuracy of 2.5% fixing voltage stabilizer to wall complete all as specified and directed.

Supply, Fixing and testing for Auto change over digital timer switch 1 To 24 Hr’s programmable micro Controller Based Technology Split AC With Auto/ Manual Facility for suitable for upto 2 TR Air conditioner (for 24 hrs operation / for operation of standby AC) complete all as specified and directed.

Supply and fixing air conditioner copper pipe grade ASTM B280 suitable size for suction and discharge line of refrigerant gas complete including jointing and testing complete all as specified and directed.

S & F for nitrile rubber foam insulation pipe suitable for suction and discharge split air conditioner copper tube complete all as specified and directed.

S & F for Unplasticised PVC pipes 20 mm dia of pressure rating 6 kgf/cm2 ISI marked with tee, bend, coupler etc fixed on wall/ floor or as required as site for AC water drain pipe complete all as specified and directed.

Supplying and fixing of PVC standard sloted cable trunking of size 100 mm W x 75 mm H fixed to walls, ceilings etc with all fixing accesories complete all as specified and directed.

S & F for round overall sheathed PVC FRLS insulated stranded copper conductor 2.5 Sqmm, 4 core, 1100 volt grade cable complete all as specified and directed.

M&L for sub main wiring using four numbers of single core FRLS PVC insulated, unsheathed multi stranded copper conductor cable of size 10.0 Sqmm of voltage rating upto and including 1100 Volts drawn in and including concealed PVC conduit of dia not less than 25 mm with standard accessories, along-with one run of FRLS PVC (green colour) insulated , unsheathed, multi stranded copper conductor of size 10.0 Sqmm as earth continuity conductor complete all as specified and directed. (NOTE : Four run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit.)

M&L for sub main wiring using four numbers of single core FRLS PVC insulated, unsheathed multi stranded copper conductor cable of size 6.0 Sqmm of voltage rating upto and including 1100 Volts drawn in and including concealed PVC conduit of dia not less than 25 mm with standard accessories, along-with one run of FRLS PVC (green colour) insulated , unsheathed, multi stranded copper conductor of size 6.0 Sqmm as earth continuity conductor complete all as specified and directed. (NOTE : Four run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit.)

Material & Labour for sub main wiring using two numbers of single core FRLS PVC insulated, unsheathed stranded copper conductor cable of size 4.0 Sqmm of voltage rating upto and including 1100 Volts drawn in and including PVC casing capping of size not less than 20 mm with standard accessories fixed on walls / ceiling surface along-with one run of FRLS PVC (green colour) insulated, unsheathed, stranded copper conductor of size 4.0 Sqmm as earth continuity conductor complete all as specified and directed.

S & F for round overall sheathed PVC FRLS insulated stranded copper conductor 1.5 Sq mm, 3 core 1100 volt grade cable connected from MCB DB to computer socket complete all as specified and directed.

Supplying and fixing of galvanised 1.5mm thick trunking cable tray with tray cover and and connected fittings of size 100 mm x 50 mm fixed to walls, floor etc with all fixing accesories complete all as specified and directed.

Supply, fixing, connecting and testing sheet metal enclosures double door type for using MCBs suitable for single pole and neutral, 8 way with having copper bus bars suitable for 200 amps rating complete all as specified and directed.

Supply & fixing sheet metal powder coated versatile double door Verticle TPN 4 way distribution system, IP 42 with copper bus bar rated 200 amps neutral link, earth bar and din rail suitable for use on 415 Volts, 50 Hz supply complete all as specified and directed.

Supply & fixing sheet metal powder coated versatile double door Horizontal TPN 4 way distribution system, IP 42 with copper bus bar rated 200 amps neutral link, earth bar and din rail suitable for use on 415 Volts, 50 Hz supply complete all as specified and directed.

Supply & Fixing industrial type sheet metal enclosures with a two pin and earth plug and socket, 250 volts with including 15/20 Amp SP MCB complete all as specified and directed.

S & F for MCCB 4 Pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA with including IP 65 sheet metal encloser complete all as specified and directed.

Supply and fixing 415 V, 10 KA 'C' curve miniature circuit breaker (MCB) of TPN and current carrying capacity 40 to 63 AMP, in the MCB DB complete all as specified and directed.

Supply and fixing 415 V, 10 KA 'C' curve miniature circuit breaker (MCB) of TP and current carrying capacity 32 to 63 AMP, in the MCB DB complete all as specified and directed.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of SPN current carrying capacity 10 to 20 AMP, in the MCB DB complete all as specified and directed.

S & F MCB single pole (SP) 6 to 32 Amps, 240 volts, 10KA, ‘B’ series, with proper size lugs and connections complete all as specified and directed.

S & F Surge Protection Device Type 2 AC 1P+N , 240 volts, 20KA, with proper size lugs and connections complete all as specified and directed.

Material and labour for point wiring for one light point or one fan point or one bell point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor, single core,FRLS PVC insulated & unsheathed cable, 1100 volts grade drawn through existing concealed PVC conduit and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FRLS PVC insulated & unsheathed cable as in earth wire connected to common earth dolly factory made GI sheet sunken box with cover plate complete all as specified and directed.

All as per Serial item No. 26 here-in-before but point wiring for 3/ 5 pin switch socket, 5 amps on same board.

M & L for point wiring for 5 Amps switch socket with using 1.5 Sqmm single core FRLS PVC insulated unsheathed multi stranded copper conductor cable 1100V grade drawn through with incl PVC casing in capping /conduit (size of as required at site but not less than 20mm) with accessories like bends tees, junction boxes and terminal boxes for mounting fittings etc. fixed on recessed in wall or ceiling etc including 1.5 Sqmm single core FRLS PVC insulated but unsheathed multistrandard copper conductor cable 1100V grade as earth continuity wire connected to common earth dolly with incl PVC board size as required at site complete all as specified and directed.

All as per Serial item No. 28 here-in-before but point wiring for 5/15 amps switch socket (independent) with using 2.5 sq.mm (nominal area) copper PVC insulated unsheathed stranded copper conductor as continuous earth wire on independent board for one socket outlet 3 pin 15 amps

Supply & Fixing Modular switch 1 way 10A 1 module complete all as specified and directed.

Supply & Fixing Modular switch 1 way 16A 1 module complete all as specified and directed.

Supply & Fixing Modular Socket, 10A - 2/3 pin combined 2 module complete all as specified and directed.

Supply & Fixing Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S & F in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Taking down fire smoke detector of any position form ceiling and refixing to false ceiling complete all as specified and directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as per shown in electrical plate No. 5 of MES Schedule Part-I with connected to earth test point main switch board with including necessary earth work and Pre- cast RCC earth pit with cover complete all as specified and directed.

Material & labour for chemical earthing complete with copper earth plate of 90cm x 60cm x 5mm, burried directly in ground vertically to depth not less than 4.0 m below normal ground level with top edge of the earth plate at a depth not less than 3.25 m below ground level connected to and including copper earth strip 32x6 mm x 7.5 mter long by means of nuts, bolts, check nuts and washer etc made of copper and connected to test point and earth dolly all as shown in electrical plate no. 5 connected to earthing test point all as specified or indicated including earth work, earth pit chamber and testing on completion complete all as specified and directed. Note:- The rated quoted shall deemed to be inclusive of the followings:- (a) The excavation and earth work (filling in, ramming in layers, watering etc as directed) in any type of soil for earth pit (pit size 1.20x 1.20x4.0mtr). (b) 20mm bore mild steel galvanised iron tubing light grade with funnel for watering purpose complete. (c) 40mm bore mild steel galvanised iron tubing light grade for strip protection (d) Main copper earth strip 32 x 6 mm upto 7.5 meter long or upto earth test point (e) Common salt and charcoal dust in alternative layers of 15cm, up to 90cm above the top of copper plate and one layers of 15cm Magnesium sulphate ( approximate quantity of salt - 500Kg, Charcoal duts - 1000 Kg & Magnesium sulphate - 150 Kg, 100 kg soil resistivity improvement GEL) complete all as specified and directed. (f) Earthing earth testing value should be less than 1.0 Ohm and this should be the sole responsibility of contractor.

M & L for 32 x 6 mm copper earth strip continuity conductor or main earthing lead with saddles, insulators and fixing screws etc on wall or recess or buried in ground or drawn in conduit or any other indicated situation for loop earthing complete all as specified and directed.

Excavation in trenches not exceeding 1.5m width and not exceeding 1.5 m in depth and getting out in Hard/dense soil for taking up/ laying cable/pipe etc complete all as specified and directed.

Returning, filling including spreding, leveling watering & well ramming in laying not exc. 25cm for soft/ loose soil complete all as specified and directed.

Removal of excavated material at a distance not exc 50 mtr and dipositing where directed at a level not exc. 1.5 mtr above the starting point for soft/ loose soil complete all as specified and directed.

Supply and laying 63 mm outer dia HDPE pipe (DWC) Double wall corrugated outer surface and smooth inner wall, ISI marked and as per IS : 16205 (part-24) or latest IS 14930 (part-II), 450N compressive strength with snap fit coupler with rubber ring for underground electrical cable protection conduits Orange colour complete all as specified and directed.

M & L for Boring of holes under road, pavement, hard standing by Mannualy or necessary machine for inserting of pipe up to 900 mm dia complete all as specified and directed.

Supply and laying XLPE insulated PVC inner sheathed, armoured with galvanized steel of wire heavy duty under ground cable with aluminium stranded conductor 1100 volt grade of 50 Sqmm 3.5 Core laid up trenches/duct crossing through pipe/duct or fixed on pole and with suitable size of glands complete and testing complete all as specified and directed by Engr-in-Charge.

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and directed.

M & L for core cutting holes into or through Brick wall, cement concrete slabs, chajjas, etc for inserting of pipe upto 100 mm dia and making good disturbed surface of walls, floors, etc. complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar complete all as specified and directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) size exc 1.5 Sqm & n.exc 4.00 Sqm each complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50 micron) aluminium frame for partitions, doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F 5.5 mm thick frosted glass fixed to aluminum frame work with rubber beading gasket exc 0.5 sq. m in each pane complete all as specified and directed.

S&F aluminium extruded section body Door closer hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F Brass mortice lock vertical type 4 lever of size 100 mm long with handle including taking down old mortice lock complete all as specified and directed.

S&F 150mm size aluminum handles, cast type anodised complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 140mm length complete all as specified and directed.

S&F 200mm size Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

M&L 9 mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination, fixed with screws to aluminum frame work complete all as specified and directed.

S&F 5.5 mm thick ordinary quality glass fixed to aluminum frame work with rubber beading gasket exc 0.5 sqm in each pane complete all as specified and directed.

S&F Powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters,aluminium section weighing 0.55 kg/ m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F Powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed by Engineer-in-charge.

M&L Reinforced Cement concrete (nominal mix) 1:2:4 type B1using 20 mm graded stone aggregate as in Beams, cantilevers, bressumm?ers, lintels over 1.5m spancomplete all as specified and directed.

M&L for formwork to sides and soffits of floor or roof beam, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves inluding supports, overhangs etc also splays between floor and beams in flat surface and rough finish surface of concrete etc complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders, cut to length bent to shape required, including crancking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia or securing with clip quality complete all as specified and directed.

M&L Brick work with fly ash brick, old size bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for rendering 10mm thick plaster in CM 1:6 on fair faces of brick work or concrete surfaces of walls finished even & smooth with out using extra cement complete all as specified and directed.

M&L for rendering 10mm thick plaster in CM 1:6 on other than fair faces of brick work, followed by 5mm thick plaster in CM 1:4 with water proofing compound @ 3% by weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified and directed. (Note : water proofing compound shall be measured & paid for separately).

Supply only integral water proofing compound

M&L preparing new surface of wall and applying two coat of oil emulsion distemper over a coat of primer and 3 mm thick wall care putty complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement base primer complete all as specified and directed.

M&L for preparing of old surfaces of walls and applying one coat of distemper oil emulsion complete all as specified and directed.

M&L for Granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality as in floor etc. complete all as specified and directed.

All as per item No 75 here in before but on vertical surfaces/skirting.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 to receive tiles etc on vertical surfaces of walls complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

S&F S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in floors/ trenches complete all as specified and directed.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore dia of outlet of pipe complete all as specified and directed.

S&F Grating square 150 mm size of PTMT (Minimum weight 100gms) complete all as specified and directed.

S&F Galvanised steel tubes medium grade with all fittings and fixtures complete fixed to walls/ceiling concealed/exposed) or laid in floor of sizes complete all as specified and directed for following :- (a) 20mm bore

All as per item No 83 here in before but 15mm bore

S&F fancy type stop valves/Angle valve (ISI marked) cast coper alloy screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed. (a) 15 mm bore

All as per item No 85 here in before but 20 mm bore

S&F fancy type Bib taps (ISI marked) chromium plated cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed of size 15mm bore complete all as specified and directed.

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm with semi perforated 12mm thick micro tegular edged GRG false ceiling tiles of approved texture, 12mm thick thick micro tegular design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqmincluding both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge.

S&F Framed work as in doors / gates of angle or other section etc door to be prepared for hanging or sliding on hinges or rail etc conforming to Fe 410-W (Gde- E- 250) quality-A complete all as specified and directed.

S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.

M&L for preparing new steel surfaces exceeding 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

S&F coloured vertical vanishing blind having minimum 75mm width of strip complete with all its accessories fixed to wall with screws complete all as specified and as directed by Engineer-in-Charge.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/loose soil complete all as specified and directed.

M&L PCC 1:2:4 type C2 (using 40mm graded crushed stone agg) as in foundation of posts and struts complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded conforming to Fe 410-W (Gde- E- 250) quality-A complete all as specified and as directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Gde- E- 250) quality-A complete all as specified and as directed.

S&F pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550 MPA as in roof covering fixed with self topping screw complete all as specified and as directed.

M&L for preparing new steel surfaces exceeding 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.

Surface excavtion n.exc 30 cm deep and averaging 15 cm deep soft and loose soil complete all as specified and as directed.

M&L for hardcore using broken stone or boulders nexc 63mm deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L 75mm thick cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and as directed.

M&L machine pressed precast cement concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade with grey cement and pigment jointed in neat cement slurry and pointed in cement mixed with pigment to match the shade of paver block complete all as specified and directed by Engineer-in-Charge.

M & L 25 mm sand filling under floors or in foundation incl watering and consolidation complete all as specified and directed by Engineer-in-Charge.

M& L factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever complete all as specified and as directed.

Removing excavated soil to a distance n. exc. 50 m and depositing where directed at a level n. exc. 1.5 M above the starting point complete all as specified and as directed.

FAIZA ENTERPRISE (BID ID -3194326)

ARTI CONSTRUCTION (BID ID -3188998)