Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.2 LAccepted-AOC KALLOORKAD GRAMA PANCHAYATH | KOLLAM | KERALA | 689694 | ₹9.2 L | L1 | Accepted-AOC L1 lowest bidder |
| 2 | L2₹9.8 LRejected-AOC | ₹9.8 L | L2 | Rejected-AOC L2 second lowest bidder |
| 3 | L3₹10.2 LRejected-Finance | ₹10.2 L | L3 | Rejected-Finance Third lowest quoted bidder |
| 4 | L4₹10.9 LRejected-Finance | ₹10.9 L | L4 | Rejected-Finance Fourth lowest quoted bidder |
| Sl No | Description | Qty | Unit | K G VASUDEVAN NAIR L3 | Faizal K P L2 | Praveen Varghese L1 | THOMAS K JOSEPH L4 |
|---|---|---|---|---|---|---|---|
| 1.00Roofing | |||||||
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 393.75 | sqm | 730 ₹2.9 L | 683.5 ₹2.7 L | 700 ₹2.8 L | 831 ₹3.3 L |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 2,362.5 | kg | 194 ₹4.6 L | 187.44 ₹4.4 L | 160 ₹3.8 L | 197.64 ₹4.7 L |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1,575 | kg | 158 ₹2.5 L | 151.79 ₹2.4 L | 160 ₹2.5 L | 169 ₹2.7 L |
| 1.00 | 12.4.2:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2 | 35 | metre | 810 ₹28,350 | 764.35 ₹26,752.25 | 400 ₹14,000 | 872.5 ₹30,537.50 |
Tender Value
₹12.0 L
EMD Value
₹30,118
Closing Date
7 Oct 2025, 4:00 pmClosed
Assistant Executive Engineer
Assistant Executive Engineer, PWD Buildings Subdivision, Nedumkandam
GENERAL-Govt.ITI Kattappana-Providing Roofing work for COPA trade-Providing Roofing work for COPA trade-General Civil Work
2025_PWD_802524_1
08/AEE/NDM/2025-26
Open Tender
Civil Works - Buildings
90 days
PWD Buildings Sub division Nedumkandam
Please refer Tender documents.
12 documents required · 12 mandatory
₹2,760
Yes
₹30,118
Yes
26 Feb 2026
26 Sept 2025
9 Oct 2025
26 Sept 2025
7 Oct 2025
26 Sept 2025
Amount
Roofing
12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
12.4.2:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2
Faizal K P (BID ID -2377077)
K G VASUDEVAN NAIR (BID ID -2376222)
THOMAS K JOSEPH (BID ID -2376412)
Bidder Name
Faizal K P
K G VASUDEVAN NAIR
Praveen Varghese
THOMAS K JOSEPH
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1333620.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
