ADDITION ALTN AND SPECIAL REPAIR TO BUILDING NO P44 AT DIVING SCHOOL PROVISION OF PAVER BLOCK TO SURROUNDING BUILDING AT CTW PAINTING TO ND SCHOOL MAIN BUILDING INCLUDING CONVERSION OF EXISTING CONVENTIONAL LIGHTS TO LED LIGHTS AT INDA KOC NAVAL B

Amount

M&L for hard core of gauge n exc. 63 mm, using broken stone broken or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M&L for 100 mm thick PCC 1:2:4, Type B1 using 20mm graded stone aggregate complete all as specified and directed.

M&L for providing cement concrete 1:2:4 , type B0, (using 12.5mm graded stone aggregate) as in kerb including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil all as specified and directed.

Excavating in post holes in soft/loose soil (or similar holes) each n.exc 0.5 cum, getting out , filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm all as specified and directed.

Excavating in trenches n. exc 1.5m wide and n exc. 1.5m in depth for foundations etc, pier holes n exc 10sqm on plan and n exc. 1.5m in depth in soft /loose soil all as specified and directed.

Removing excavated material (soil) to a distance exc 1.50 km but n exc. 5 km and depositing where directed all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers not exc 15cm thick complete all as specified and directed.

M&L for Plain cement concrete 1:2:4, type B1 using 20mm graded stone aggregate as in foundation, filling & mass concrete complete all as specified and directed.

M&L for Rolled Mild steel sections (including Tubular sections) as in main pillars and cross beams, hip and jack rafters, purlins where connected to common rafters and fixed with angle cleats or other connecting plates complete all as specified and directed.

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 600 x 300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade over and including 10 mm thick rendering CM 1:3 all as specified and as directed.

S&F Framed work as in grills, gratings, doors or gates of angle or other sections with gusset plates, rails, braces, etc complete drilled for fixing to steel sheeting or other covering, doors, etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening complete conforming to Fe-290, Gde E-165 all as specified and as directed.

S&F Stainless Steel framed work such as grills, gates, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars;and similar work conforming to Stainless steel grade 316 and hung as gates, including pintle hinges, stops, hand-made sliding bolts included for ornamental and intricate design etc complete all as specified

Demolition of reinforced cement concrete of any description and in any position.

Dismantling structural steel work incl doors, gates but excluding framed trusses.

M&L plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and completed.

M&L Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified

M L for reinforced cement concrete Type B1 1:2:4 (20mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete in all as specified

M&L Use and waste of form work to sides of pillars posts ,struts, piers, columns etc complete in all as specified

M&L for reinforced cement concrete Type B1, 1:2:4 using 20mm graded stone aggregate as in columns, etc.; complete in all as specified

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde- E- 250) quality- A

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E 250) Quality A or Fe-290 (Gde E-165) complete all as specified and directed

S&F All as per item No.27 above but for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, binders etc

M&L for 20 mm thick Granite (of any type, table rubbed and polished) for wall lining (veneering to wall) over and including 10 mm thick cement mortar (1:3) and pointing with white cement & marble dust (1:2 ) with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8, Type D-2 using 40 mm graded stone aggregate complete all as specified and directed.

M& for Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 80mm thickness, M-40 Grade with grey cement and pigment over and including a 25mm thick layer of coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm Spreading and levelling in layers n exc. 25 cm thick, well ramming including watering as required complete all as specified and directed.

Demolition of brickwork built in cement mortar complete all as specified and as directed..

M&L for Pre-cast cement concrete block masonry with solid blocks type C1, 1:3:6 (20mm graded stone aggregate), exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed.

M&L plain cement concrete 1:3:6 type C1 using 20mm graded stone aggregates as in coping including necessary form work

M&L for preparation of new steel Surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of anti corrosive Epoxy paint over a coat of Epoxy primer all as specified and as directed.

M&L for rendering 15 mm thick on brick or concrete surface in cement mortar 1:4, finished even and smooth without using extra cement

Extra for forming of fair finished drain or channel having 30cm inner girth in cement concrete all as specified and as directed.

M&L for complete removal of existing treatment from internal surfaces of wall using modern tools and techniques like pre watered pipe jet, mechanical grinding etc complete all as specified and as directed.

M&L for provn of water proofing primer putty on internal wall surfaces including preparation of wall surface all as specified and as directed. . Note :- Putty shall be applied only after obtaining approval for complete removal of old treatment from Engineer-in-charge and PMG.

M&L for one coat of base coat for interior emulsion on putty finished internal wall surfaces complete all as specified and as directed.

M&L for first coats of interior emulsion (Asian Royale or equivalent brand of other approved manufacturers) all as specified and as directed.

M&L for second coat of interior emulsion (Asian Royale or equivalent brand of other approved manufacturers) on first coat painted surface Note for item No.36 & 39:- (i) The paint and putty shall be duly applied through authorised company applicator of approved manufacturer using modern tools and techniques all as specified and as directed. (ii) The second coat shall be applied only after obtaining approval for first coat from Engineer-in-charge and PMG.

M&L for complete removal of existing treatment of ceiling surface and preparation of ceiling surface and applying two coats of OBD over a coat of alkali resistant primer over and including 3 coats of putty complete all as specified and directed.

S&F LED tube light fitting (Regal Batten) Box type, with both side connection, LED tube rod 20W with all fixing accessories and connecting to the existing electrical system incl taking down existing light fitting complete all as specified and directed. . Make:- Havells Cat Part No. BATTENT 8 UPTO 1x 22W SSWSSBSWH & CRYSTAL 1213T8DSTC20WLED 865 SGLASS / Crompton Cat Part No. LGT8-20-865-2 / Jaquar Cat Part No. LTBLGlX020C or Equivalent model from other manufacturers from the list

S&F LED down lighter, square, 15 W, 240 volt 1 x1 LED flat panel for surface mounting incl taking down existing light fitting complete all as specified and directed. . Make:- Havells Cat Part PLUTOSURFACE 1x1PLS15WLED857S or Equivalent model from other manufacturers from the list

S&F LED Building security light fitting with 30 watts, P66 protection, min 100 lumens per watt light output, 5KV external drive and 4KV internal drive surge protection, power factor 0.95, THD less than 10%. Potted driver with RoHs and CE marking, fitting comprises of unique fitting arm tilting option, die cast aluminium housing and heat resistant toughened glass including taking down existing old unserviceable MH/HPSV fittings Make:- Crompton Cat Part no. LSTS-30 CDL-M or Equivalent model from other manufacturers from the list

M/s ANTONY THOMAS AND CO

MS BUILDERS

HEAVEN ENGINEERS AND CONTRACTORS

Albert Rebello and Company

SUKU CONSTRUCTIONS

Anaswara Constructions

WELTRONENGINEERINGSERVICES

ANIE JOHN CONTRACTORS

ST ANTONY CONSTRUCTIONS