Loading
Loading…
Loading…
Tender Value
₹1.2 Cr
EMD Value
₹2.4 L
Closing Date
16 Jun 2026, 3:30 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
NORTH
15 conditions · 3 needing a document upload
Financial Eligibility Criteria as per Clause 10.2 of Part-I of IRSGCC-2022 and ACS No.1 dt 14.07.22: The tenderer must have minimum average annual contractual turnover of 'V/N' Or 'V' whichever is less; where V=Advertised value of the tender in crores of Rupees; N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-F (Annexure-VIB of GCC), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Any Civil Engineering Work / Zonal maintenance works.
20 conditions · 9 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The original BG (in lieu of Bid Security) should be delivered in person to the official nominated (i.e.OS/Tenders/Engg/GNT Division) before closing date for submission of bids.(i.e., excluding the last date of submission of Bids).
All the instructions furnished in the Technical Compliance / Commercial Compliance / Custom / Undertakings / General lnstructions are only indicative and not exhaustive. The tenderer shall read the GCC / Tender documents for complete details.
The tenderer shall thoroughly go through the entire tender documents and strictly adhere to the instructions and directions given therein.
Tender value is including escalation of (-)15% (Minus Fifteen percent) on CPWD DSR rates. Tenderer should note this before quoting the rates.
Zone Piduguralla: New Piduguralla (including) to Savalyapuram (excluding), Sathenapalli (Including) to Nadikudi (excluding) for the period from 01-07-2026 to 30-06-2027
494-DRM-W-GNT-Tid-2862
494-DRM-W-GNT-Tid-2862
Open
Works - General
12 Months
Guntur, Andhra Pradesh
₹0
₹2.4 L
16 Jun 2026
22 May 2026
2 Jun 2026
39 items across 1 schedule · ₹5,57,974.28 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | NS-GNT-DSR-19-Supply of G.I. pipes 25 mm dia medium class | Metre | 30.00 | 401.38 | 12,041.4 |
| 2 | NS-GNT-DSR-21-Supply of G.I. pipes 50 mm dia medium class | Metre | 36.00 | 695.73 | 25,046.28 |
| 3 | NS-GNT-DSR-112-Supply of CPVC pipe 50 mm | Foot | 300.00 | 147.17 | 44,151 |
| 4 | NS-GNT-DSR-115-Supply of CPVC pipe 25 mm | Foot | 400.00 | 46.82 | 18,728 |
| 5 | NS-GNT-DSR-117-Supply CPVC 50 mm Coupling | Each | 30.00 | 173.93 | 5,217.9 |
| 6 | NS-GNT-DSR-146-Supply CPVC 25 mm Coupling | Each | 48.00 | 78.94 | 3,789.12 |
| 7 | NS-GNT-DSR-147-Supply of CPVC 25 mm 'T' bend | Each | 16.00 | 93.66 | 1,498.56 |
| 8 | NS-GNT-DSR-186-Supply of U-PVC pipes (working pressure 4 kg/cm2) Single socketed pipe 110mm dia | Foot | 450.00 | 120.41 | 54,184.5 |
| 9 | NS-GNT-DSR-187-Supply of UPVC coupler for UPVC drainage pipes 110 mm | Each | 7.00 | 254.21 | 1,779.47 |
| 10 | NS-GNT-DSR-191-Supply of U-PVC pipes (working pressure 4 kg/cm2) Single socketed pipe 75mm dia | Foot | 300.00 | 82.95 | 24,885 |
| 11 | NS-GNT-DSR-192-Supply of UPVC coupler for UPVC drainage pipes 75 mm | Each | 7.00 | 194 | 1,358 |
| 12 | NS-GNT-DSR-199-supply of precast RCC Manhole cover 600 x600 mm (24''x24") | Each | 7.00 | 628.83 | 4,401.81 |
| 13 | NS-GNT-DSR-201-supply of precast RCC Manhole cover 450x450 mm (18"x18") | Each | 10.00 | 428.14 | 4,281.4 |
| 14 | NS-GNT-DSR-223-Supply of PTMT bib-cock 15 mm dia (prayag) | Each | 51.00 | 401.38 | 20,470.38 |
| 15 | NS-GNT-DSR-224-Supply of PTMT Push cock 15 mm dia | Each | 40.00 | 267.59 | 10,703.6 |
| 16 | NS-GNT-DSR-225-Supply of PTMT Angle valve 15 mm dia | Each | 50.00 | 307.73 | 15,386.5 |
| 17 | NS-GNT-DSR-226-Supply of PTMT pillar cock 15 mm dia | Each | 16.00 | 468.28 | 7,492.48 |
| 18 | NS-GNT-DSR-228-Supply of PTMT Two-way bib- cock 15 mm dia | Each | 6.00 | 508.42 | 3,050.52 |
| 19 | NS-GNT-DSR-229-Supply PTMT Two-way Angle valve 15 mm dia | Each | 6.00 | 508.42 | 3,050.52 |
| 20 | NS-GNT-DSR-230-Supply of PTMT Health Facuent including gun,pipe and brackets | Each | 12.00 | 602.07 | 7,224.84 |
| 21 | NS-GNT-DSR-235-Supply of PTMT Nylon connection 600 mm lenth 15 mm | Each | 24.00 | 133.79 | 3,210.96 |
| 22 | NS-GNT-DSR-236-Supply of Flat back wash basin 500x400 (20" x 16") mm for single hole standard make including waste coupling, waste pipe and rock bolts. | Each | 6.00 | 2,809.67 | 16,858.02 |
| 23 | NS-GNT-DSR-238-Supply of Indian type orrisa pattern water closet pan size 508.0 mm(20 ") (White) | Each | 6.00 | 2,408.29 | 14,449.74 |
| 24 | NS-GNT-DSR-239-Supply of pedestal type water closet 460x350x400 (White) | Each | 6.00 | 6,154.51 | 36,927.06 |
| 25 | NS-GNT-DSR-240-Supply of White plastic W C seat (solid) with lid C.P. brass hinges and rubber buffers | Each | 12.00 | 602.07 | 7,224.84 |
| 26 | NS-GNT-DSR-241-Supply of Flushing cistren 10 litres l o w level cistern w i t h fittings standard make | Each | 6.00 | 1,672.42 | 10,034.52 |
| 27 | NS-GNT-DSR-246-Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings | Each | 30.00 | 107.03 | 3,210.9 |
| 28 | NS-GNT-DSR-255-Supply of Ordinary Portland Cement-53 grade | per 50 kg of cement | 40.00 | 481.66 | 19,266.4 |
| 29 | NS-GNT-DSR-256-Supply of common burnt clay F.P.S. ( Non modular ) bricks of class designation 5.0 | 1000 Nos. | 10000.00 | 5,351.75 | 53,517.5 |
| 30 | NS-GNT-DSR-260-Supply of white cement | Tonne | 1.00 | 14,984.9 | 14,984.9 |
| 31 | NS-GNT-DSR-262-Hiring of JCB with all contractors men, consumables and machinery | Hour | 25.00 | 1,337.94 | 33,448.5 |
| 32 | NS-GNT-DSR-16-Supply Coarse Sand at specified locations | cum | 15.00 | 1,662.62 | 24,939.3 |
| 33 | NS-GNT-DSR-76-Supply of SS Fly proof wire mesh (4 feet height) | Square Foot | 400.00 | 36.12 | 14,448 |
| 34 | NS-GNT-DSR-81-Supply of Oxidised mild steel sliding door bolt 300x16 mm | Each | 24.00 | 100.35 | 2,408.4 |
| 35 | NS-GNT-DSR-82-Supply of Oxidised mild steel sliding door bolt 250x16 mm | Each | 24.00 | 93.66 | 2,247.84 |
| 36 | NS-GNT-DSR-83-Supply of Oxidised mild steel tower bolt (barrel type) 200x10 mm | Each | 24.00 | 66.9 | 1,605.6 |
| 37 | NS-GNT-DSR-84-Supply of Oxidised mild steel tower bolt (barrel type) 150x10 mm | Each | 24.00 | 60.21 | 1,445.04 |
| 38 | NS-GNT-DSR-103-Supply of block board construction flush door with commercial ply on both faces 30mm thick. | Square Foot | 108.00 | 133.79 | 14,449.32 |
| 39 | NS-GNT-DSR-106-Supply of 18mm thick MDF board. | Square Foot | 128.00 | 113.72 | 14,556.16 |
| Schedule total | ₹5,57,974.28 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Master Tender Document
ATTACHMENT
GCC 2022 with all ACSs
ATTACHMENT
DivyangjanGazette.pdf
ATTACHMENT
LabTesting.pdf
ATTACHMENT
OnsiteLabTestingofMaterialsguidelines.pdf
ATTACHMENT
RevisedApprovedlistofBrandsandMakes2026.pdf approved list of brands
ATTACHMENT
System improvements
ATTACHMENT
SpecialConditionsofzones2026_1.pdf
ATTACHMENT
RevisedApprovedlistofBrandsandMakes2026.pdf
ATTACHMENT
SystemImprovementsformaintainingSiteRecords-CE-WorksLr.pdf
ATTACHMENT
ZonalMasterTenderDocument2025-WithACS-11.pdf
ATTACHMENT
GCC_April-2022_2022ACS1to11-Merged-compressed1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .