Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹93.2 LAccepted-Finance R O VILLAGE DHARA PO GARSA TEHSIL BHUNTAR DISTT KULLU HP | 1 | Accepted-Finance 1 | |
| 2 | 2₹94.7 L+₹1.6 L (1.67%)Rejected-Finance | 2 | Rejected-Finance 2 | |
| 3 | Not Admitted-Fee/PreQual/Technical M S ASHAPURI INFRACON PVT LTD VILLAGE AND PO HURLA TEHSIL BHUNTER DISTT KULLU H P | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification | |
| 4 | Not Admitted-Fee/PreQual/Technical VILL CHUNI P O BAGAHAR TEHSIL KOTKHAI SHIMLA | SHIMLA | HIMACHAL PRADESH | 171001 | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification | |
| 5 | Not Admitted-Fee/PreQual/Technical NOT AVAILABLE | NEW DELHI | DELHI | 110001 | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹94.4 L
EMD Value
₹1.9 L
Closing Date
22 Aug 2024, 10:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE HP PWD Katrain
EE HP PWD Katrain
Landslide Mitigation Measures on Naggar Sharan Rumsu Pulag Road
2024_PWD_91760_1
Landslide Mitigation Measures on Naggar Sharan Rumsu Pulag Road
Open Tender
Civil Works
Item Rate
540 days
Manali
Landslide Mitigation Measures on Naggar Sharan Rumsu Pulag Road
5 documents required · 5 mandatory
₹2,000
EE HP PWD Katrain
₹1.9 L
28 Aug 2024
13 Aug 2024
23 Aug 2024
13 Aug 2024
22 Aug 2024
13 Aug 2024
Amount
Excavation in soil in hilly area in all heights and depths in all kinds of soil including saturated soil comprising of pick, jumper, blasting work both in soft and hard rock with chiseling/wedging out of rock( where blasting is not required ) and their intermediate classification of soil including, dewatering wherever required setting out to the required line grades, side slopes trimming bottom and level as shown on the drawings as directed by Engineer-in-charge at site according to technical specifications clause 1603.1,&1603.2 and sorting out useful/un useful materials and stacking the same in all leads and lifts and transportation of the un-useful materials for filling in road ways, embankments for grades improvements and levelling to the required grade and then disposing of surplus excvatedearth in acquired width of roads or on approved dumping sites through all modes of transportation including head load animal load or mechanical means along with its leveling fine dressing and all labour, machineries, materials, tools equipments and safety measures and incidentals necessary to complete the work by all means (if any required) Recovery for use ful stone of 55.47Cum@ 300/-per cubic metre amounting to Rs 16641.00/- only shall be done on prorata basis for the quantity of cutting in earth work effected. Any loss to the public and private property during the course of execution shall be the absolute responsibility of the contractor, which shall have to be duly compensated by him in all respect. within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.
Construction of subgrade and earthen shoulders from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1
Construction of granular sub base by providing well graded material spreading in unforms layer with mortor grader on prepared surface mixing by mix in place method with rotavater at OMC and compecting with smooth wheel roller to achieve the desired denesty complete as per technical specification clause 401 within all leads and lift including carriage of material in all respect as per direction of Engineer-in- charge.
Providing laying spreading and compacting stone aggregate of specific size to water bond macadam specification including spreading in uniform thickness hand packing rolling with smooth wheel roller 80-100 Kn in stages to proper grade and camber applying and brooming stone screening/binding material to fill up the interstices of course aggregate watering and compacting to the required density Grading-ll as per tech specification clause 405 By mechanical mean within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.
Providing laying spreading and compacting stone aggregate of specific size to water bond macadam specification including spreading in uniform thickness hand packing rolling with smooth wheel roller 80-100 Kn in stages to proper grade and camber applying and brooming stone screening/binding material to fill up the interstices of course aggregate watering and compacting to the required density Grading-Ill as per tech specification clause 405 By mechanical mean within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.
Providing and laying primer coat with bitumen emulsion SS-1 on prepared granular surface including cleaning of road and spraying of primer 0.70- 1.00 Kg per Sqm using mech mean as per technical specification within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.
Providing and applying tack coat with bitumen emulsion (RS-1) using emulation distributer at the rate of 0.25 to 0.30 kg ( zero point twenty five to zero point thirty kilogram) per sqm on the prepared dry and hungry bituminous surface cleaned with hydraulic broom as per technical specification clause 503 and as per direction and entire satisfaction of Engineer –in- Charge with in all leads .lifts and carriage
Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 45 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No 508 complete in all respects within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.
Earth work in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto any lead ,dressing of sides and bottom and backfilling in trenches with excavated suitable material within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.
Providing and laying concrete for plain/reinforcement conc. In open foundation as per drawing and technical specification clause 802,803, 1202, 1203and 1206 PCC grade M-15 for nominal mix (1:2.5:5) within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.
Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification Clause 1204.3.8 within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.
Providing weapholes in retaing walls and Breast walls, with 100mm dia PVC pipe extending through the full width of structure with slop of 1(v) towards drawing face complete as per drawing and technical specification clauses 614,709 and 1206.6 within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.
Providing and laying of boulder apron laid in wire crates with 4mm (Four millimetre ) dia GI wire conforming to IS: 280 and IS: 4826 in 100mmx 100mm(One hundred millimetre into One hundred millimetre ) mesh (woven diagonally ) including 10(Ten) percent extra for laps and joints laid with stone boulders weighing not less than 25 kg.(Twenty five kilogram ) each as per drawing and technical specifications clause 1301 within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.
Back filling behind abutment, wing wall and return wall complete as per drawing and technical specification clause 1204.3.8 Granular material. within all leads and lift of materials and as per direction of Engineer-in- charge.
Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all leads & lift ,as per drawing and technical specification clause 1603.1 within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.
Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications clause 802, 803,1202 and 1203 PCC grade M-10 nominal mix 1:3:6 within all leads and lift of materials and as per direction of Engineer-in- charge.
Providing and laying of dry rubble flooring complete as per drawings and technical specifications clause 1303.3 within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.
Providing and laying reinforced concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation protection work, back filling, concrete and masonry work in head walls and parapets clause 1108 900mmdia within all leads and lift of materials and as per direction of Engineer-in- charge.
Providing and laying concrete for plain/ reinforced concrete in open foundations complete as per drawing and technical specification clause 802,803,1202 and 1203 PCC nominal mix 1:4:8(One cement : Four sand : eight graded stone aggregate 25mm (Twenty five millimetre nominal size ). within all leads and lift of materials and as per direction of Engineer-in- charge.
Construction of hill side drain with PCC 1:3:6 ( One cement :Three sand : Six graded stone aggregate 20mm (Twenty millimeter )nominal size) accordance with requirement of specification true to line and grades. Dimension and other particulars as per drawing and technical specification clause -1606.1. including carriage of material within all leads and lifts. within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.
Earth work in excavation for hill area for drain as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto any lead ,dressing of sides and bottom and backfilling in trenches with excavated suitable material within all leads and lift including carriage of materials and as per direction of Engineer-in- charge.
Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications clause 802, 803,1202 and 1203 PCC grade M-20 nominal mix 1:2:4 within all leads and lift of materials and as per direction of Engineer-in- charge.
Type-A “W” metal beam cash barrier comprising of 3 mm(Three millimetre) thick corrugated sheet metal beam rail, 70 cm(Seventy centimeter) above road/ ground level and to be fixed on ISMC series channel vertical post, 150x 75x5mm (One hundred fifty into seventy five into five millimetre) to be spaced 2m (Two meter) centre to centre to be kept 1.50 mtr (One point eigh zero) meter high and to be kept 0.80 mtr.(One point one zero ) metre below ground/ road level all steel parts and fitments to be galvanized by hot dip process, all fittings to conform to IS: 1367 and IS 1384 as attended upto date , metal beam rail to be fixed on the vertical post with a space of channel section 150x 75x 5mmOne hundred fifty into seventy five into five millimetre) and 330mm (Three hundred thirty millimetre ) long complete as per clause 810 connecting to MORTH(Ministry of transpsort highway ) specification (latest revision ) including all fittings required for erection at road site of material equivalent within all leads and lift of materials and as per direction of Engineer-in- charge.
durga parasd contruction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .