Kullu Tenders

Erection of Sub-Station

Earth work in excavation by mechanical means (Hydraulic excavation ) manual means over areas ( exceeding 30 cm in depth but exceeding 1.5 m inwidth as well as 10 sqm on plan including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge:

Precision fabrication, metallurgical-grade forming, and site-assembled integration of Draft Tube Bend assemblies for Unit-III & IV, including contour-matched profiling using 6 mm SS plates, 25 mm machined flanges, full-penetration welding, dimensional restoration to original geometry, NDT/QC validation, hydraulic leak testing, alignment and commissioning as per approved drawings and E.I.C. directives.

Providing PVC insulated and FRLS Round Sheathed, multistranded Copper Conductor (flexible) power cable of size 2Cx1.5 mm sq., 1.1 KV, Make: Havells/Polycab/KEI.

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m Ordinary rock as per the diretion of Engineer in Charge at site.

Supply, installation, testing and commissioning of ACTIVATED CARBON FILTER with UV System having Epoxy Coated Pressure vessel with Set of frontal pipe work and valves Set of internal water distribution and collection system & Pressure gauge to monitor head loss across the filter with Orifice board for indicating wash water flow to be fitted in drain sump to remove dirt, dust, silt, sand, insects, fibre, odour colour and other organic matters etc of the following specification:- Dia. :- 1800mm HOS:- 1875mm Flow rate :-61 m3/hr Shell:-5mm Dish End :6mm Frontal Pipe Work:100mm Carbon Depth :-1000mm Carbon Qty. :- 2.54 m3 MOC :-MSEP